Unable to view .mov file on fcp 7
Hello,
I've been sorting through previous posts hoping to find a solution to my problem, but so far everything that's been suggested has been unsuccessful for me. I have a QT mov file (codecs: AVdn, Linear PCM, Timecode) that when imported to FCP 7 only plays audio. White screen is displayed on the viewer. I've tried converting it to other formats and every time only the audio plays. It will not open in quicktime, however, in vlc the video and the audio both play. I'm looking to be able to re-edit this project, so please, how can I get the video working?
The media is in codec not supported by QuickTime on your machine. I think it's an Avid codec. Their codecs can be downloaded from their web site. You can probably then use Compressor to convert it. How you convert it I can't tell without complete information on the source file. Check exactly what it says in movie inspector in the QT player.
Similar Messages
-
Unable to view .mov files on Vista 64 bit system:
I use a MacBook Pro to download videos from a Canon HD camcorder. These files are saved as *.mov files. While I can view these files on my MacBook Pro, I cannot import/view them on my Windows based PC, using PRE 8. I purchased this software because it was supposed to support editing .mov files. When I try to import a .mov file I get and error "Codec missing or unavailable." Shouldn't the codec for .mov files be included in PRE 8? Any ideas on how to solve this issue?
Thank you for your response.
I have download the latest version of QT twice, even purchased QT pro, no luck. I have even re-installed PRE 8.
I have updated my video drivers and downloaded GSpot and MediaInfo to see what codec's I need. According to everything I've read and done, PRE 8 should work. Just as a side note; in QT pro for Windows, I can import .mov files but only the audio plays no video. -
How to view .mov files on a pc?
how to view .mov files on a pc?
Thank you for your prompt responses. Thought this was the correct answer. Didn't want to pass on incorrect information.
Thanks -
Unable to view PDF files online (This message appears see screenshot)
Unable to view PDF files online (This message appears > see screenshot)
It says:
'' Before viewing PDF documents in this browser you must lunch Adobe Reader and assept the End User License Agreement, then Quit and relaunch the Browser ''
Though, i can oped normally PDF files like Fotos, Invoices etc.
Any idea what's going wrong ?
Thanks for your time.
Kind Regards,
Alex -
Unable to view video files in browser :[
Does anyone know why Safari is unable to view video files in the browser ??? I used to be able to view .mpg video files right in the browser and when viewing .wmv files Safari would open up Windows Media Player which would then play the file. I really dug that feature. Now when clicking on a .mpg video file, Safari simply downloads the file to my HD and that's it. Is there an easy fix for this issue ??? Hello !!! Anybody ???
Tell the QuickTime plug-in to play the file inside a browser window.
Open System Preferences/QuickTime and click the Advanced tab. Click the MIME Settings button and then put a check mark in MPEG media.
Quit and relaunch your browser for these changes to take effect. -
Unable to view PDF files in Infoview
I am unable to view pdf files in InfoView (Business Objects Edge Series XI 3.0)
When I select the pdf file from Infoview, I receive the message 'Do you want to save this file' which only allows me to save the document to a location on my computer.
Other users can view the file in Infoview, so it probably relates to a setting on my computer.
Any ideas?
ThanksI've had a little look on Adobe's knowledge base; try this to check whether the issue is related with opening PDF in your browser in general:
"Determine if the web browser can open the PDF file from your local hard drive rather than from the web:
In the web browser, choose File > Open (or Open File).
Choose All Files from the Files Of Type pop-up menu (Windows)
Click Browse
Select the PDF file you saved in step 1 of task 5, and then click Open to open the PDF file. If Acrobat or Adobe Reader displays the file, but won't display it on the web, the web server has a problem serving the PDF file. Contact the webmaster of the site from which you downloaded the PDF file."
If so, try the troubleshooting steps mentioned here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328233&sliceId=2 -
Unable to view pdf files in IE 11.
Unable to view PDF files in IE 11, Winows 7. Works fine in Google Chrome on same pc. Everything is up todate.
See the solution at http://support.microsoft.com/kb/2716529
However, that Fix-it won't work on Windows 7; you will need to make the registry change manually. Download, unzip, then run the attached registry script to change that registry value. -
I am a beginner with video. What software do I need to view .MOV files on my Dell Desktop?
.mov is Apple "Quicktime".
You should be able to download a player here: http://apple.com/quicktime
Tim Campbell
5D II, 5D III, 60Da -
I am using safari 6.0.3 I am unable to view PDF files online - I reset safari - did nothing - any ideas? thank you
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
"Unable to view this file because Acrobat was not found."
I Downloaded Adobe Creative Suite 6. I created an Interactive PDF Form and then tried to export the form to PDF. I get the following error. "Unable to view this file because Acrobat was not found."
What do i need to do to get this to work?In the Export dialog, try turning off the box that says View PDF after Exporting. It may be on by default.
-
Using Aperture 3 and Lion I can no longer view .mov file
Using Aperture 3 and Lion I can no longer view .mov files from a Canon G11. I get a thumbnil which is a triangle with !. If I right click I can open it with Quick time. I cannot import any of the files into iMovie as it does not recognize them in Aperture or iPhoto. From other dicussions I tried removing 3ivvxVideoCodec.componenet from Quiktime Library and retarted with no success, so iI restored the file.
You are welcome;
there is another problem with videos, that might apply in your your case, when you reimport the videos, after you deinstalled the codec - the location you are importing from, and the permission settings, see this post:
Re: Aperture cannot read newly imported video since Lion upgrade.
Regards
Léonie -
I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min program). How can I get this program onto a dvd (where the max available gb's for off the shelf dvds-r) shows a max of 8.5gb?. Please help. Thank You!
You have posted your question in the Final Cut Pro X forum. You want to be in this forum instead; https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd
Good luck.
Russ -
Logic is unable to find movie file
I have tried "everything", but Logic won't load my score. I imported a movie file from FCP and since it was a reference movie, the render files are gone (I've edited the film in FCP since). Now in Logic, it is trying to find those render files...they're gone. So how do I get around this. How do I tell Logic to forget that video file so I can import the new one? This is a ridiculous issue! Thanks for your help.
Pixelkid wrote:
I have tried "everything", but Logic won't load my score. I imported a movie file from FCP and since it was a reference movie, the render files are gone (I've edited the film in FCP since). Now in Logic, it is trying to find those render files...they're gone. So how do I get around this. How do I tell Logic to forget that video file so I can import the new one? This is a ridiculous issue! Thanks for your help.
Sorry to break the news to ya, but it's not an issue or even a ridiculous one. You deleted the files, so it's down to pilot error. Now, here are a few things you can do to remedy the situation...
*Suggestion 1* -- create a dummy movie. Length, content, doesn't matter. Give that movie exactly the same name as the original and put it in exactly the same location as where the original movie lived. Then try and load your session. Logic's not going to know the difference between the original file and that one, so it should load.
*Suggestion 2* -- launch Logic and hold down the CNTRL key while it launches. You'll get a message asking if you want to run CoreAudio. Say "no". Then try and load your file.
Or... if you have Logic up and running already, turn off CoreAudio in your prefs. Then try and load the file. Once it's loaded up, delete the movie from within Logic.
*Suggestion 3* -- find a copy of the original files in your backups. Restore them to their original location, including the proxy (reference) movie file. -
Bought av adapter to watch iPad on tv. Plugged it in iPad and received message not compatible. Both are apple products. Unable to view movies on tv from iPad. I also used hdmi cable
Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.
-
.mov file from FCP, what's the next step to convert it to play on a dvd?
I have a project save to a .mov file from FCP and it looks great. It was shot in 720 HD but my dvd won't play .mov files.
I'd like to either convert it to an .avi or mpeg file now but after trying a few times through QT Pro and even Mpeg Streamclip, the footage is either pixelated or is too choppy to play on my dvd (Samsung HT5500).
What are the best settings to convert a HD .mov file to play on a dvd so it looks great. What software should I use for this... QT Pro or Mpeg Streamclip?
TIA,
DaleDVD Studio Pro.
And you can't make a DVD that is HD; DVDs are standard definition. You can make Blu-ray discs with a Blu-ray burner and Blu-ray player, but you DVDs will only be 720x480.
Convert in Compressor with a preset for DVD, and import that into DVD Studio Pro.
Maybe you are looking for
-
How to display data from 2 different groups in a single table
Hi, Following is the requirement: The XML Content is below ListOf_ssAssetMgmtAsset> -<ssAssetMgmtAsset> <ssAccountName>1-1D09-83031</ssAccountName> <ssAccountPrimaryCountry>USA</ssAccountPrimaryCountry> <ssAssetNumber>13111027</ssAssetNumber> <ssNaiA
-
Now i want to burn it to a dvd using a flashdrive and burning it on another PC that has a burner. Does anyone know how i can do this? My macbook air HAS IDVD....
-
"Your server is not configured properly or your search query has exceeded the limit. Please check server configuration." is shown when I click on the address book tab. Is this a known issue and patchable? There is no error in the directory server log
-
How do i transfer selected photos to tv
I purchased Apple TV and I was able to tranfer some photos to it from my Bookair. i would like to transfer some older photos and delete others but i don't know how. Can somebody help me?
-
We are using Access 2013 as the front end and SQL Server 2014 as the back end to a client server configuration. Access controls are bound to the SQL fields with the same names. When using Access to create a new record in a Form, the data are not tran