Unable to view MSS settings

I just added a windows 2008r2 server and trying to create a group policy. I am unable to view the MSS security settings.  Is there a way to enable these settings?
Thanks
norman mattox

Hi,
I would like to confirm that how are everything going on,. If there is anything we can
do for you, please feel free let us know.
Best Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Yan Li
TechNet Community Support

Similar Messages

  • I am unable to view ATV settings from iMac using AirPort utility

    I am unable to view ATV settings from iMac using AirPort utility. Having problems with ATV quitting Airplay since recently updating.

    I was interested to know if I could configure, or at least view the settings of my ATV from a Mac computer. This is because I have it connected to a projector rather than a HD TV and so it is not always convenient to view settings directly from the ATV display.
    Anyway I tried finding it using Airport Utility and it does not show up (Mavericks running Airport Utility 6.3.2 on one iMac and Snow Leopard running 5.6.1 on another).
    When I click on File>Connect Other it asks for an IP address and password. I doubt if knowing these would allow me to connect.
    The ability view settings and configure ATV from Airport Utility would be a useful feature. We should suggest this to Apple via feedback:
    http://www.apple.com/feedback/appletv.html

  • My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

    My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

    It may not be your computer telling you this, it is probably the company providing the shows to you over the Internet. If that is the case, no setting on your computer can change it because the media company is going by your network address (IP address), which is where your Internet modem (cable or DSL) connects to the outside Internet. If the location of your Internet connection appears to be outside the US (even if it is mistake), media companies that distribute shows under contracts with geographical restrictions may lock you out.
    If you use a service like a VPN service, you may have the ability to use IP addresses from other countries so that you can appear to be connecting from there. But it takes some setting up.

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Unable to View Data in the table of a  CDC enabled Data Store.

    hi all,
    I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
    where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
    Can anyone help me out???
    is there any settings which we need to do, to see the data in a CDC enabled DS.

    any help ????

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Unable to view music videos in iTunes on mac

    I have iTunes on a G5 Mac Pro It is on the latest version of 10.5 with the most recent update to iTunes. I am unable to view music videos many of which I purchased from the iTMS or came with music CD's as extras some are m4v others are mp4.
    If on import I set the option for format as being Music Video I cannot get the videa to launch double clicking on the video gives a picture in the album cover window but does not launch the video viewer nor does the video play. I dont often view  music videos just Movies or TV Shows and last time I did I recall Music Videos playing they opened in a seperate window and there was once a setting in preferences where you could choose if a video launched in a new window or used on in iTunes.
    I have used the info window to change the video type to standard movie and then going back to the file in iTunes double clicking launches the video in full screen mode. Once I then set back to Music Video it reverts to refusing to play.
    In any format the file plays in Quicktime
    Any suggestions pointing to where the problem may lie would be welcome. I cant see any relevant settings to set how a video displays in either menus or Preferences other than ensuring video window stays on top. It maybe in one of the many upgrades this Mac and iTunes has had the settings have been corrupted.

    They will not show up in a separete category in iTunes. This is because the videos will show up as songs so that you can play the audio portion of a video without the video. Try it.

  • Unable to view enhanced field in Data Source

    Hi All,
    We recently upgraded our R/3 system from 4.7 to ECC 6.0. Now when we are enhancing the data source, the field is visible in the Extract Structure. But we are unable to view it in the data source. We checked out in RSA2 the enhanced field attribute is specified as 'Field in OLTP and BW Hidden by SAP'. We have written code to modifiy the ROOSFIELD table to make the enahnced field visible. But this is the problem with all the data sources. Whenever, we have to enahnce, we have to go thru this process to make the enhanced field visible.
    Is it like that we missied out any patch in ECC 6.0 while upgrade? If any person faced similar situation, please help us.

    Hi Ravi,
    I think you are missing a step here. As soon as you enhance your datasource with new fields, by default, those 2 check boxes are checked ( Hidden and Field in User exit only). You go to RSA6, edit your datasource and here, you can uncheck these added fields so that you can use them. You do not need to write any code to change the fields settings in ROOSFIELD table. Do the step I mentioned above after enhancing and you should be good. Hope it helps.
    Thanks and Regards
    Subray Hegde

  • Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

    Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Unable to view website from within network - OSX Server

    I have recently set up a Mac mini server in my home. I have configured the DNS settings manually by creating a primary zone being my domain and then a machine record (A Record) in order to configure the right host name. I've checked this the usual way in terminal and it returns success.
    Before I go ahead and configure my mail, I noticed that I was unable to view my website. From within my network on any device.
    NB. My website is hosted externally with a third party.
    I have Mac Mini running Mavericks 10.9.1 and Server 3.0.2, I'm using a 2TB Time Capsule as the router which plugs directly into my fibre modem. Ports are opened correctly as I have done this through the Server App panel where I can see my Time Capsule.
    I've obtained the IP of the website and when I tried pinging it from terminal it cannot resolve. I've contacted Apple, and after 2 hours on the phone to them, I've been told it's out of the scope of their support.
    If this is DNS, can someone help, because I'm pulling my hair out!
    Thanks in advance.

    I have now figured this out!
    After setting up the hostname in the Server app I auto created the DNS records.
    I have removed them all, created a new zone, the zone being my domain name; I have then created a Machine (A) Record being my hostname; I have then created another ***BLANK*** Machine (A) Record being my domain, and hey presto, everything works perfectly.

  • Unable to view user login in OS X Lion 10.7.3 startup

    unable to view user login in OS X Lion 10.7.3 startup.  I had made some changes in icloud settings & by mistake must have checked some option related to username & password. Also when i turn my macbook pro on, i can see the grey background with apple logo, however it does not show my image & login password space. thus i'm unable login to my system. please help

    hey ..was able to solve the problem,,had selected "name & password" in "display login window" option of "user & group" of system preference. That's why was unable to view my login username.
    How i resolved it - after turning my macbook pro on, i pressed "shift" key...that way it opened in safe mode...& then went to system prefernce & again selected the previous option of "list of users" in display login window option. nyways thanx for helping out

  • Unable to view video files in browser :[

    Does anyone know why Safari is unable to view video files in the browser ??? I used to be able to view .mpg video files right in the browser and when viewing .wmv files Safari would open up Windows Media Player which would then play the file. I really dug that feature. Now when clicking on a .mpg video file, Safari simply downloads the file to my HD and that's it. Is there an easy fix for this issue ??? Hello !!! Anybody ???

    Tell the QuickTime plug-in to play the file inside a browser window.
    Open System Preferences/QuickTime and click the Advanced tab. Click the MIME Settings button and then put a check mark in MPEG media.
    Quit and relaunch your browser for these changes to take effect.

  • Unable to view pdf - initially thought to be user / OS issue for new user to MAC.

    Unable to view pdf created in Live Cycle Designer ES2.  I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop.  She could not view the document through email.  Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list.  I can open the file without a problem although I see the error she sees only while viewing the icons in my folder.  I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed. 
    Other notes: 
    If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
    Everyone seems to have the latest or a very recent READER
    The form is compatible with Reader versions 7 and up
    Again, downloading from the internet to the computer appears to allow the file to open properly
    Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
    All parties involved are up-to-date with virus protection.
    Below is a link to the exact message received when trying to open the document.
    https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

    Sorry, this is a user to user forum and we're just customers who help out when we can, so things don't always happen right away.
    Reader, Regardless of OS or device, is as the name implies, only a Reader.  There are different mail settings between Mac Mail Outlook and Thunderbird as well as Andsroid's mail app, whose name escpoaes me.
    Have you checked in the Live Cycle Forum? There are people there with FAR more experience using LC developed forms. It's part of my Creative Suite, but I've never even opened it myself.

  • SharePoint Online IE 11 Unable to View Document Library

    I have a user that is using Windows 7 and IE 11. Whenever they open any sharepoint site, they are unable to view documents. They see the webpart title, but nothing underneath. I know this happens with the "Links" list as well as document libraries.
    Newsfeeds work fine.
    I have tried compatibility view, deleting cache, cookies, history, restoring advanced settings, and resetting the browser. None of these things work. I know it is not a permissions issue because I am able to log in as the user and I am able to see everything.
    Any ideas?

    There's conflicting ideas on this.  WebDAV handles explorer views on the server side.  SharePoint used to (don't know if it still does) have it's own built in version of that.  But when it's asking for username/password, that sounds to me
    like an ISS authentication issue, or a permissions issue.  Since you probably own it, I doubt permissions is the problem.
    For an overview
    http://support.sherweb.com/Faqs/Show/how-to-connect-to-a-sharepoint-site-using-webdav-sharepoint-2013
    Take a look at this for solutions:
    http://sharepointinterface.com/tag/webdav/

  • Unable to view PDF (baggage file) in CHM

    Hi,
    I have recently started using a new desktop pc running Windows 7. I am now unable to view PDF files (added as baggage files in RoboHelp) in the CHMs generated by RoboHelp. Even existing CHMs (generated before switching desktops) have this problem. Has anyone experienced the same problem and managed to solve it?
    Sofie

    A while back someone told me they had a similar problem with IE8 and advised they fixed as below:
    "After fiddling around with some settings, I found that if you go to Settings/Safety and enable Active X Filtering, the embedded files open normally."
    That will only fix it on your machine though. Do these CHMs work on other machines OK?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for