Unable to view my Imovie working screen

I work with a two screen system.
recently had to disasemble my system.
When I put it back together, I have lost the working platform of Imovie.
It is present, I can see it if I command new movie, but otherwise cant see it.
It seems to be located in a virtual screen on my right.
I think it is only a setting, but can't figure it out.
Any advise anyone ???
Tks,
Syl

<<<Supported browsers seem to be your first issue. IE version 6 is out (version 7 works). Firefox is another option.>>>
Do you mean IE version 6 does not work?
I doubt if I can be telling everyone what they need to view my movie on mobile me.
Any suggestion for easiest way to publish movie so that the average user can view it without a lot of trouble. I tried YouTube, but my movie is 11.4 mins. and limit is 10.00 mins.
Thanks, George

Similar Messages

Unable to view movies in full screen

I am unable to watch movies in full screen mode. When I try and select it, I am simply taken back to the itunes window, but the movie audio continues. I can watch the movie at any other size. What's going on?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Unable to view project in full screen mode.

I'm working on three different imovie projects, and they are all in my project library. For two of the three projects I have no problems viewing them on the full screen mode, but the one that I'm currently working on won't play full screen when selected, it plays a different project. I called Icare support, and they said the problem wasn't in the program, but rather in the project. They suggested that I post my question here on the Apple Message Board to see if they are any suggestions, otherwise, I'll have to rebuild the project...I've spent two weeks working on it...ouch!

Think of Full Screen Mode like a browser that let's you watch a movie. If you stop before it ends, it remembers your place and lets you take up where you left off the next time you come back.
Move your cursor down toward the bottom middle of the full screen view. You will see a cover flow view, and you can select the project you want to view.

Unable to view Songs in Content Screen in iTunes

When I connect any Shuffle to iTunes, the Setting screen displays information accurately. However the Content screen is empty of any songs, even though the Setting screens shows that I have used up disk space for my songs. When I then try to add a new song, all the existing songs on my shuffle are erased and only the new song is now found when I play the shuffle. Why would this be happening?

No. That is what I noticed. If they are in the library the contents of the shuffle display. When I remove them, the songs no longer display on the shuffle.
When I use an iPod classic, I see the songs on my iPod, even though they are not in my libary. Its only in the shuffle that they seem to need to be in the library. Is this the way the shuffle works, versus the classic?

Unable to view picture in full screen

When I double click a picture in iPhoto, it brings up a black screen. Same thing when I try and do a slideshow -- the pictures do not show up. Any ideas on what I am doing wrong?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Unable to Initialize Capture Device - Works fine in iMovie

Am using a Sony HDV HDR HC1E Pal Handycam
Final Cut Pro 5.1
QT Pro 7.1.3
Works fine with cassettes in HDV - imports into FCP fine
Am trying to import a cassette recorded on that camera in DV LP
Works fine in iMovie
Have deleted the QT packages and reinstalled QT
Still am getting the 'Unable to Initialize Capture Device' message when using log and capture.
Settings on camera
VCR Auto (have also tried HDV or DV)
iLink conversion off (i.e.don't convert hdv-dv)
TV type 16:9 (have also tried 4:3)
Component 1080i/576i also tried 576i
Annoying thing is that works fine in iMovie but not FCP?!!
Any help GREATLY appreciated!
Thanks!
Hannah
iMac 20 Flat Screen G5 1.8Ghz 1.5GB SDRAM Mac OS X (10.4.8) 200 GB and 120GB External Hard drives

I would like to add the following in hopes that someone will come up with a solution. The problem lies somewhere in Quicktime and the FireWire capture. I have the exact same camera and problem, and can assure you it has nothing to do with cam settings or DV LP. Once your system is stuck in this HDV mode, it would seem that regular DV can not be used again. I also have 2 other DV cams that are not HD. One is PAL, one is NTSC. I would further add that my external FireWire iSight no longer works in any application. I do not receive error messages, I simply get the spinning beach-ball of death.
I have a Dual G5 2.7 with 4 gigs RAM running FCP 5.0.4 on OS 10.4.8
I have run Cocktail, rebuilt permissions and re-installed Quicktime 7.1.3 four times as per Apples tech article 301852
I have used FCP Rescue 5 to clear preferences
I have captured footage from both regular DV cams to iMovie and then added the footage to FCP. The footage plays on the screen of both DV cams flawlessly via FCP. (I can also capture HDV in iMovie as well)
I have tried logging footage directly through the QuickTime application with both DV cams and my iSight and get the same beach-ball of death as FCP.
Why can iMovie work with these devices flawlessly yet QuickTime can not.
Why does it seem like the system is stuck in some kind of HD mode.
Just to point out the obvious:
I have no other FireWire devices other than the cameras and I only connect one at a time.
I have shut down, disconnected and re-connected before attempting to use the devices.
I have booted my G5 from a second system disk and everything (HDV cam PAL DV cam NTSC cam and iSight) function flawlessly on all the FireWire ports of my machine.
I have worked with FCP for about 6 years and Macs for 20. I understand the easy set ups etc.
Spent way too much time customizing my system to think about the clean install route, so I hope someone can shed some light on this.
Thanks
Lorne
PowerMac Dual 2.7 GHz PowerPC G5 4 GB DDR SDRAM 400 GB and 250 GB Internal Drives Mac OS X (10.4.8)

Unable to view full page , only in full screen i am able to view it

unable to view full screen , getting only 1/2 or 1/4 view of the page . but able to see full in full screen

What is the error?
The DNS cache could be stuck.
In the Terminal try:dig www.macupdate.comIt should reply that it is 70.86.154.194.
If that doesn't work, you DNS is not working and pointing you to the wrong place.
You can try clearing the DNS cache with dscacheutil -flushcacheAlmost forgot to mention: there are several threads on similar problems.
Message was edited by: Barney-15E

Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults

I have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

i have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Imovie crashes when i try to view the video full screen or export it. How do i fix this?

iMovie crashes when i try to view the project full screen and export it. How do i fix this?

Close out of the camera app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your camera roll again.

TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Unable to view thumbnails in PSE13 only show as hourglass. Tried reinstalling software still not working.

Unable to view thumbnails in PSE13 only show as hourglass. Tried reinstalling software still not working.
Any suggestion?

Thanks Barbara - Tried that but still nothing. The only way I can view is by double clicking each image.

Unable to view links in email. Email is defined as 'Hotmail'. My IPhone 4S works fine. Both devices has been upgraded to IOS7.

Unable to view links in email. Email is defined as 'Hotmail'. My IPhone 4S works fine. Both devices has been upgraded to IOS7.

Calendars (and contacts) can "sync" between your MBP and your iPhone through iCloud because they really live on the iCloud servers and the two devices are clients. iCloud can accomplish much the same trick for email messages because the email really resides on iCloud email servers.
If the email resides on some other server, that server is responsible for whatever syncing will be done. IMAP servers like the iCloud servers are built for such syncing; other mail servers may or may not be. iCloud would not be involved with email other than iCloud email.
I understand Hotmail has been changing how their email servers are accessed. Check with Hotmail support for any changes you may need to make to keep up.

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

My computer is saying that I am not in the US and so I am unable to view shows, Youtube, etc. I've gone under the location settings and put US several times but nothing has worked. What should I do?

It may not be your computer telling you this, it is probably the company providing the shows to you over the Internet. If that is the case, no setting on your computer can change it because the media company is going by your network address (IP address), which is where your Internet modem (cable or DSL) connects to the outside Internet. If the location of your Internet connection appears to be outside the US (even if it is mistake), media companies that distribute shows under contracts with geographical restrictions may lock you out.
If you use a service like a VPN service, you may have the ability to use IP addresses from other countries so that you can appear to be connecting from there. But it takes some setting up.

Unable to view my Imovie working screen

Similar Messages

Maybe you are looking for