Unable to view my nonadditive measures in the cube.

Hello,
I have several nonadditive measures in my one of my measure groups. These are a several rates  & adjustments. I wish to see the measures only at the leaf level.
When I change the aggregation to sum - although it doesn't make sense to sum rates, I see the correct value at the leaf level. when I change the aggregation to "none" - no values are visible at the same level.
Appreciate any help in understanding what is wrong.
TIA.
SS

Hi SS-C,
the problem is with definition of "leaf level" even If you drill data to lowest detail in one dimension, cube aggregates the data by other unused dimensions. This is cause by MDX
1. it applies dimensions you have selected
2. default members are used from dimensions
3. data are summarized to all member
4. if none of that is applicable, first is selected (could apply to measures, if you query data directly using MDX)
So if you choose aggregate function none, excel as client doesn't display it in pivot table field list. But value is in cube and you can access it either by double click on cell with measure from same measure group as your non additive measure, or use drillthrough
action in cube
Jiri Neoral

Similar Messages

  • Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

    I'm unable to access content on my iPod Classic while it is connected to iTunes.
    The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
    I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!! 
    I just downloaded the iTunes program.
    Very confused, pleaseee help ...

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    Hi Jen.  My daughter just compleated her nursing program and is now working as a full time nurse.  Focus and study hard and soon you will be there too.  Now to the problem at hand.  I have the same problem.  I gave up on it and satisfied myself with my iPod without the upgrade.  Reason being I've read so many posts of people having problems after the upgrade.  But I'm sure other factors are involved.  Nevertheless here is the fix most say works to solve the problem:  What ever virus protection you have installed on your computer, disable it.  Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade.  Hope this works.   Charlie

  • Unable to view download movies when in the air??

    unable to view downloads when on the plane??

    You might want to include a little more information such as the source of the download and the app. However, if you are referring to a movie purchased in itunes, yes, once downloaded you do not need WiFi to view. but it must be downloaded first.
    To actually download or stream, you need a WifI connect that permits that. Most airline WiFi services block large file downloads and streaming.

  • I am unable to view source or bring up the error console in firefox 4

    I just upgraded from Firefox 3.6.15 to Firefox 4 on my Mac running Snow Leopard. I am unable to view the source of websites and I am unable to bring up the error console. When I try to do any of these tasks nothing happens.

    Same here, on Firefox 5.0

  • Mera, (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view.  This also erased the pictures from the memory card. Help?

    I tried to download my pictures with my memory card from my camera (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view, also not saved in my 'Iphotos'  This also erased the pictures from the memory card. Help.....anyway of retrieving them?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    did you get a message when trying to import from the memory card?
    did you use a card reader?
    what was you exact workflow for attempting the import?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library? See image below:
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Unable to find key figure attribute in the cube

    Hi all of you,
    I am struggling while working on this "Display Attribute". Please read this and help me out.
    I want to create attributes and then load data into a cube.
    I had created an InfoArea IA_ATTRIBUTES.
    Under this IA_ATTRIBUTES I created an InfoObject Catalog IOC_DISPATTR.
    Under IOC_DISPATTR I created an InfoObject ZCUSTNUMB which is my primary key.
    After defining the ZCUSTNUMB I clicked on the Attributes tab and entered the other attributes like ZCUSTNAME, ZCUSTADDR, ZCUSTREGI, ZCUSTLOCA, and ZPRICE. All of these attributes except ZPRICE are characteristics WHILE ZPRICE is a keyfigure.
    I've also made sure that the Attributes only check box is not checked for all the characteristics.
    I then activated the InfoObject ZCUSTNUMB and came back.
    Now I created a cube DISP_ATTR. I clicked on the InfoObject Catalog button and selected the above mentioned catalog IOC_DISPATTR and transferred the IOs from the template into the structure.
    Now when I transfer IOs in this way all the IOs both characteristics and key figures should come into the structure of the cube isnt't. But only characteristics have come and the keyfigure ZPRICE hasn't come.
    Moreover when I hit on the key figures tab and hit on the find button and find ZPRICE I am getting a message saying "No (further) object found". So when I hit on the create button and create a key figure ZPRICE I am getting a message saying "InfoObject ZPRICE already exists as Key Figure (please rename)".
    However when I double click on ZCUSTNUMB which is the primary key, the screen "Display characteristic ZCUSTNUMB: Detail" opens. In this screen I find all the attributes in the attributes tab that I had defined while defining attributes including ZPRICE.
    So what I don't understand is when all the characteristics IOs are visible under the characteristics tab then why am I unable to find the key figure ZPRICE under Key figures tab when I created it while defining attributes. Can anyone please explain me this situation and tell me how should I find the key figure ZPRICE so that I can go ahead and create the cube.
    Lastly I want to know what are the differences between InfoObjects and Attributes. Is an attribute also an IO?
    Please explain.
    I would appropriately rewards your answers.
    Thank you.
    TR.

    Hi Oscar Romero,
    Thanks a lot for your reply. As per your suggestion I created another IOC FOR key figures called IOC_ATTR_KF. In this IOC I had included the key figure ZPRICE and activated the IOC.
    Now I have created a cube again ATTR_DISP. On the right corner where we find 5 buttons I clicked on the InfoObject Catalog button. The screen "Select InfoObject Catalog" opened displaying the IOC_ATTR_KF that I had created earlier. When I double clicked on the IOC_ATTR_KF I got the msg asking "Do you want to transfer the IOs from the template into the structure?" I clicked on Yes. But I don't find any key figures either in the Structure pane or in the Template pane. Both the panes are empty.
    I also clicked on the All InfoObjects button and searched for ZPRICE but again I am getting the message "No "further) object found". However when I try to create ZPRICE I am getting the message ZPRICE already exists.
    Please explain me why this is happening like this?

  • "In FBL5N unable to view purchase order number and the sales order number"

    Hi,
    Below mentioned is the problem we are facing,
    In the Customer Line Item Display (FBL5N) it is vital for us to be able to view the customer's purchase order number as well as the sales order number for each billing document listed by customer.
    We need to be able to extract this information for each customer and import to an excel spread sheet for analysis, specifically for our larger customers that have over 500 plus lines.
    Kindly advise how to go about the same.
    Regards
    Harish

    Dear,
    Please also check note 152335. There, you will find a more detailed            
    explanation of the issue.                                                                               
    The only way to see some information regarding related PO-es in a Vendor       
    line items is a workaround. For example, it is possible to create              
    a substitution in order to fill in one of not currently used fields            
    like Reference, Text, etc.    
    I hope this helps You.
    mauri

  • Unable to view saved passwords in Safari - the box keeps un-checking itself. Advice? Help?

    Trying to view a saved passwords in Safari for particular website(s) I need to login to... so as usual I click the box to within the preference-saved UID/passwords list and by doing so allows me to view the password. However, suddenly today this little box will not remain checked and instantly un-checks itself no matter how many times re-click it! What's going on? Please advise asap.
    Thanks!

    Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Click "Reset".
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions

  • ESS Payslip - Unable to view in Portal after changing the variant in R/3.

    Hi
    Unfortunatly, someone was deleted a variant in R/3 for Payslip. So I have created a new variant in R/3 and am able to see my Payslip perfectly in R/3. But If I try to view the same Payslip ( for any month ) in Portal it is showing nothing.
    I feel that this was happend due to that variant in backed missing. I know there is a property been set to that variant in repective iView.
    Now I want set my created variant in Portal. Where exactly I have to add this variant in Portal ( iView) and how?
    Regards

    Have u set the required customisations in backend.
    Normally when u see the payslip in ESS, it shows not for the current month its shows one month prior's salary slip so try generating a salary slip for previous month.
    Regards,
    --VP.

  • Unable to view images in the crystal reports on a jsp

    Hi folks,
    I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
    If anyone of you know how to fix it. Kindly post it. It's urgent.
    PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

    Hi Suresh,
    Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
    Add an entry in web.xml as follows ( if it doesn't exist)
    <context-param>
      <param-name>crystal_image_uri</param-name>
      <param-value>/<your application name>/crystalreportviewers115</param-value>
    </context-param>
    crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
    -Aasavari

  • Unable to view purchased history in Mac App Store

    I am unable to view my purchased history in the mac app store.
    I just purchased a new macbook air and went to the app store in the hopes of downloading the apps I purchased onto this new this new device. I am unable to view them on this device although I have been able to view them on my macbook pro.
    Is there a way to restore the list of apps onto this new device?
    I have gone to the individual apps and re-bought them. Once I try to buy I get a message informing me that I have already purchased this app in the past and it starts to download. But it still does not appear in the purchased list once the download is complete.
    Moreover, I have purchased adobe elements 9 and I am unable to re-buy it since adobe has released elements 10.
    Please help.
    MJ

    Launch iTunes on the MBAir.
    From the menu bar click Store > Authorize This Computer
    Now back to the menu bar again click Store > Sign Out
    Now follow the instructions here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Make sure you are using the same Apple ID and password that you used on the MBPro.

  • SharePoint Online IE 11 Unable to View Document Library

    I have a user that is using Windows 7 and IE 11. Whenever they open any sharepoint site, they are unable to view documents. They see the webpart title, but nothing underneath. I know this happens with the "Links" list as well as document libraries.
    Newsfeeds work fine.
    I have tried compatibility view, deleting cache, cookies, history, restoring advanced settings, and resetting the browser. None of these things work. I know it is not a permissions issue because I am able to log in as the user and I am able to see everything.
    Any ideas?

    There's conflicting ideas on this.  WebDAV handles explorer views on the server side.  SharePoint used to (don't know if it still does) have it's own built in version of that.  But when it's asking for username/password, that sounds to me
    like an ISS authentication issue, or a permissions issue.  Since you probably own it, I doubt permissions is the problem.
    For an overview
    http://support.sherweb.com/Faqs/Show/how-to-connect-to-a-sharepoint-site-using-webdav-sharepoint-2013
    Take a look at this for solutions:
    http://sharepointinterface.com/tag/webdav/

  • Unable to view web-based videos

      For the past few days, I have been unable to view web-based videos with the exception of YouTube. I am running Windows 7, IE 10, and am using Flash Player ver 11.8.800.94. Have tried using Beta ver 11.8.800.115 with no change. I have run 2 different anti-virus/anti-malware programs, and nothing was found. Have un-installed/re-installed Flash Player several times, and still receive messages telling me I need to download Flash Player. My system shows that I am running Flash Player 32-bit, but no videos besides YouTube will play. have been in contact with Microsoft for assisstance, and have followed all their suggestions, but still no luck. I am down to rebooting my laptop from scratch but thought I would see if you might be able to assisst me first.Any suggestions?

    Check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Mapping measures in a cube vs Calculated Measure

    I have a fact table as
    Fact_Table_
    Sales Product_ID Special_Product_Flag
    Special_Product_Flag is a y/n flag
    and a Dimension_ table as
    Product_ID Product_Name
    I want to have 2 measures in the cube
    1. Product_Sales
    In the cube I specify the mapping for this measure as Fact_Table.Sales
    2. Special_Product_Sales
    in the cube I specify an olap expression in the mapping as
         case
         when Fact_Table.Special_Product_Flag = 'Y' then Fact_Table.Sales else 0 end
    Now is the measure      Special_Product_Sales treated as a calculated measure ?

    Here are definitions of base versus calculated measures.
    <li> A base measure is a measure that has associated physical storage in the AW. This physical storage is populated using some kind of load step, which may use either SQL or OLAP DML. The measure may then be aggregated according to the aggregation rules of the cube. The value of a base measure for any given cell in the cube may be stored or may be calculated dynamically depending on the "precomputation" rules of the cube.
    <li> A calculated measure is one that has no physical storage in the AW. The values of a calculated measure are always calculated dynamically regardless of the precomputation rules of the cube.
    Your case is clearly a base measure because you are physically loading data into the AW. The fact that you use a case expression in the mapping does not change the fact that is takes up physical storage nor the fact that it can be aggregated. It is the ability to aggregate the data that makes this a useful feature. In your case you will be able to aggregate special_product_sales up the product hierarchy so that its value for 'ALL_PRODUCTS' will be
    select sum(sales)
    from fact_table
    where Special_Product_Flag = 'Y'The value of sales for 'ALL_PRODUCTS', by contrast, would be
    select sum(sales)
    from fact_tableAs a side note it may be better to define your mapping using NULL instead of 0.
    case
    when Fact_Table.Special_Product_Flag = 'Y'
    then Fact_Table.Sales
    else null
    end

Maybe you are looking for