Unable to view number of messages in a thread

Frustrated user here who opens Mail to find that the View bar (don't know what to call it - it is that blue dot) no longer shows the number of messages in a thread. This would be bad enough - but Mail will NOT let me expand the (Read Status?) (Thread Status?) to show the number of unread threads. I can hover the mouse over the divider bar in the "To" field to make it larger or smaller. I can hover the mouse over the divider in the "Subject" field to make it larger or smaller. Same with most (but not all) of the fields. Normally, I can expand the "blue dot" (what the heck is it called????) field, but today I can't. Last time I had this problem - maybe a year ago - I could do nothing to solve it, until about a month later when in just started working again. Help anyone? OS X 10.5.2 on an iMac (20-inch Mid 2007).

The problem mysteriously went away - just like it did the last time it happened. I can now expand the field to reveal how many messages there are in the threads. I suspect a problem with .mac mail. Maybe there are times when it doesn't know the message count (hard to say why). Anyway - the problem is not solved, but it is not (currently) present.

Similar Messages

  • Unable to view MMS in message conversations. Do they expire?

    +iPhone 3GS 16GB running Firmware 3.1.2 on O2 UK. (5GB+ Free Space)+
    *I am unable to view older MMS on my iPhone.*
    Earlier in the week a friend sent me some MMS, but since then has text everyday, when I scroll to the top of conversation to view the MMS I am unable to view them. One MMS I can see the small preview and the blue arrow which lets you view in full screen, however this does not work. I also cant copy or forward the preview. Where there are meant to be other MMS, all I can see is the blue arrow yet again it does not workn and no preview.
    In another conversation from a month ago, the most recent message is an MMS which does work, but in the same conversation I am having the same issues with older MMS.
    Actions Taken:
    Restarted iPhone, this did not solve the issue.
    Deleted all message conversations apart from one, but deleted all texts and kept two MMS, this did not solve the issue.
    Restarted iPhone again, this did not solve the issue.
    Did a full restore on iPhone to bring back all message converstations that were deleted, still did not solve the issue.
    I would say the MMS files is still there somewhere, but how can I get to them?

    I have checked through other message conversations, one does have MMS and I am able to view in full screen, I checked the others again and when I click the blue arrow for full screen, it just shows the most recent picture in my photo album.
    What is the problem here, everything worked fine when I first got them, why not now?

  • Unable to View Applet -Error message

    I have installed JRE 5 in my system but still when i try to acces a web page iam unable to view the applets present in it. I have set the IE settings to use JRE 1.5 for applets.Still iam unable to view it.
    i Get the "java.lang.ClasssnotFoundException " when i right clicket the place where applet should be found and click the "Java Console" link present there.
    Can anyone please help me? Follwing is the error message i receive.
    load: class com.gotnla.MOTS13.LoginMenu not found.
    java.lang.ClassNotFoundException: com.gotnla.MOTS13.LoginMenu
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    ... 10 more

    Just a guess: maybe you're behind a firewall, and you haven't configured your JVM to use the same firewall as the browser.

  • Unable to view the jms message

    My prog is :
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    package edu.ejb.model;
    import java.io.Serializable;
    import javax.annotation.Resource;
    import javax.ejb.Stateless;
    import javax.jms.*;
    * @author BHAVIRISETTY
    @Stateless(mappedName="demo")
    public class MyIntfImpl implements MyIntf {
    @Resource(mappedName="javax.jms.QueueConnectionFactory")
    QueueConnectionFactory qcf;
    @Resource(mappedName="myqueue")
    Queue q;
    QueueConnection qc;
    @Override
    public void insert(String id, String name) {
    try
    qc=qcf.createQueueConnection();
    QueueSession qs=qc.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
    QueueSender qsend=qs.createSender(q);
    qc.start();
    Customer customer=new Customer();
    customer.setId(id);
    customer.setName(name);
    System.out.println(customer.getName()+""+customer.getId());
    ObjectMessage om=qs.createObjectMessage((Serializable)customer);
    System.out.println("before sending object"+om);
    qsend.send(om);
    qc.close();
    catch(Exception e)
    i deployed it in weblogic sucessfully but in adminconsole (Home >ID:<258017.1336030157018.0>;SystemModule-0!Queue-0:3 >JMS Modules >SystemModule-0 >Queue-0 >Summary of JMS Messages >JMS Modules >SystemModule-0 >Queue-0 >Summary of JMS Messages >ID:<258017.1336030710476.0>;SystemModule-0!Queue-0:6) i got like this
    Unable to view message, reason = java.lang.ClassNotFoundException: edu.ejb.model.Customer
    please let me know what i have to do in step by step approach.
    Please reply me fast
    Thanks!

    I haven't looked at the code, but suspect that problem is that simply deploying the class is not sufficient, as the console class loader won't be able to find classes embedded in a deployment. The class likely needs to be in the system classpath.
    A work-around might be to code your own browser tool in java or WLST scripting. I think we'll be releasing a white-paper on this type of coding in the within the next few weeks.
    Tom

  • Unable to view HFM System Messages - Very Very Urgent Please.............

    I am having issues with seeing Users on system or system messages in release HFM 11.1.2.1 I get a message that *"You do not have the proper access rights to perform this task."* and I ensured that in the configuration the creator group and administrator group are set up as administrators. I have not been able to find anything that I can change security wise.
    The details of the error are below:
    *" System Messages "*
    You do not have the proper access rights to perform this task.+
    Show Details:
    Error Reference Number: {5F81E0EB-52C5-4C96-8F5A-DD9ECBAE4233}
    Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxServer.cpp;Line: 2457;Ver: 11.1.2.1.000.3082;
    Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 4175;Ver: 11.1.2.1.000.3082;
    Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:32:22 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1060;Ver: 11.1.2.1.000.3082;
    *" Users on System "*
    You do not have the proper access rights to perform this task._
    Show Details:
    Error Reference Number: {1B34A605-F996-4CB9-8D7D-30C0A467170F}
    Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHsxClient.cpp;Line: 3857;Ver: 11.1.2.1.000.3082;
    Num: 0x8004021d;Type: 0;DTime: 5/9/2011 8:33:36 AM;Svr: GITSHYPT01;File: CHFMwManageApplications.cpp;Line: 1891;Ver: 11.1.2.1.000.3082;
    can anyone please assist....?
    Regards,
    Shan...

    I believe your user ID is not contained within the group set up in the HFM configuration's "application administrator". This group is independent of the role "administrator" since it is set at the server level, not application level. The same group controls access to the enable/disable connnections, and logout users feature.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Unable to view MMS messages

    My daughter sent me a text with a picture attatched.  I never had problems receiving mms with my Palm Pre, but the MMS on my Charge says I need to download.  WHen I press it, it says downloading but nothing happens.  Do I need to change something somewhere? I read the manual, watched the videos, and hit a few Droid boards to no avail.  Help!

    Hi Mzlinnie, 
    Are you still unable to view your MMS message?   Booch provided a great suggestion. Additionally, I would suggest ensuring you have sufficient 4G or 3G signal in effort to download the message. Please advise if you require additional assistance.
    Thanks for you involvement in our community forums, 

  • WVC80N - Internet Gateway UPnP discovery failure message \ unable to view over the internet

    I have the WVC80N.  I recently got the new Comcast modem \ wifi but the Wifi is junk and had a lot of problems (loss connection, range etc) so I had Comcast "bridge" it so I just use my old wifi (LinkSys E1200).   I have TZO to handle remote viewing.  Everything was working great for about two weeks and we had a power outage.  Since then, I have been getting UPnP discovery message (in the status tab of the WVC80N camera site) and I am unable to view over the internet.  I get a 502 error usually but today I got extra info: "The socket connection to www.dfgehring.mylinksyscam.com failed.
    ErrorCode: 10060.  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond."
    I had Comcast do a "repair / reset" transmission to the modem and still get the problem.
    I found these step on the forum:
      1. Home Wirless Rounter administration page, find the UnPn settings and Turn off UnPn and save it. Wait for atleast 30 sec  and go the same page and Turn it back on.
      2. On your wireless camera Adminstraion page, go to "Options" and find the UnPn if it is already disabled go ahead and "enable" it also "enable" the "Alternate web connection" and save it. If it was already enable please disable it save the settings and enable back on.
     The above 2 steps resolved my issue and I could able to view my camera from outside of my home network.
    Still no luck.  Tried it several times.
    Could the power outage reset something on the modem or router to change this? 
    Thanks
    Darren

    That's what I thought. The power outage may have set the modem, router or camera settings back to factory defaults causing it to loose connection. First thing first, call comcast and check if the modem is still on bridge mode. The modem may have been set back to a modem/router mode due to power outage.
    You may test if the remote access is properly set up in the network by going to http://ping.eu. In that site, you will see your internet ip address, take note of that. Click on port check, enter your internet ip address and the port number you used in the alternate web access port then click Go. If it says closed, there something wrong in the settings of either the router or camera. In that case, I suggest you reset the router and camera and then reconfigure them.
    I found these articles online which could help you reconfigure your router and camera settings:
    How to set up your router
    How to set up router wireless setting
    Connecting camera to wireless network
    How to set up remote access on linksys camera
    How to set up TZO on the linksys camera
    Hope these helps.

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • Unable to view messages present in inbox/sent/draf...

    Phone: Nokia N8
    Unable to view messages available in inbox/Sent items/draft & even reports If i send a SMS to a group say group has more than 5 contacts and click on send button.
    No message appears when i open sent items, reports or inbox after messages are sent.
    To view messages again i have to restart my phone.

    Well, I'm not exactly sure what happened but I think I've got it fixed for now.
    FWIW, I went to Mail -> Preferences and clicked on the Accounts -> Advanced tabs. The "Enable this Account" box was checked just like always. I unchecked it, saved the changes, and exited Mail.
    Then I went back to Mail -> Preferences -> Accounts -> Advanced, checked the "Enable this Account" box once again and saved the changes. Now it works just fine!

  • Unable to view PDF files online (This message appears see screenshot)

    Unable to view PDF files online (This message appears > see screenshot)

    It says:
    '' Before viewing PDF documents in this browser you must lunch Adobe Reader and assept the End User License Agreement, then Quit and relaunch the Browser ''
    Though, i can oped normally PDF files like Fotos, Invoices etc.
    Any idea what's going wrong ?
    Thanks for your time.
    Kind Regards,
    Alex

  • How can I view the number of messages in each folder

    I have just installed TB 24.4.0 on a new Windows 8 desktop.
    On my older Windows 7 desktop also running TB 24.4.0, the folder pane is configured to display the number of messages and space usage of each folder.
    Both machines are set to the same "classic view" but I cannot persuade the new one to display the same folder statistics, only the count of unread messages.
    Where can I find the option to do this?

    Install this add-on.
    https://addons.mozilla.org/en-US/thunderbird/addon/extra-folder-columns/

  • Unable to view sent message from one of my email accounts

    I have two email addresses from my email server. On one of the accounts, I am unable to view the text of the messages in the sent mailbox and I get the following message:
    The message from (my email address is shown here) concerning “Insurance” has not been downloaded from the server. You need to take this account online in order to download it.
    The server says there is nothing in my sent box on the server to download. I have selected the choice in the preferences area that says to delete messages from the server "right away" when they are downloaded.

    Patrick,
    If running Tiger, see:
    http://discussions.apple.com/thread.jspa?threadID=413196
    If running 10.3.9, as your Profile says, then you likely have an "Overstuffed" Sent mailbox. See the Topic at the following link, and the topic linked from within it:
    http://discussions.apple.com/thread.jspa?threadID=121837
    and
    http://docs.info.apple.com/article.html?artnum=25812
    Ernie

  • I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I've just seen this message for the first time and it's showing on 10 devices.
    What I really love about Apple Configurator is the copious amount of context driven help offered to you.
    "Unable to send ClearPasscode command to device.
    The device was disconnected.
    Check the USB connection to the device."

  • Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.

  • TS3899 My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the de

    My mail is configured correctly.  When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing.  I touch the display and nothing happens.  I have uninstalled and reinstalled the email account and restarted the device.  I can send mail fine as well as view my sent messages.  Very confusing.

    I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on  my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
    When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

Maybe you are looking for