Unable to view some contacts

I have a problem with some of the contacts on my iphone 4 (running 4.1)
I am able to call all of the saved contacts, but if I try to open some of the contact information then the contacts app shuts down completely.
This effects about half of my contacts. I sync the contacts folder with MS Outlook on my win 7 pc

I tend to believe after what you have said here, is there seems to be a corrupt file. You will have to try and complete the update for iOS and see what that does to the contacts. Make sure you have your contacts all synced to the computer so they will be available. Good luck on downloading the update after working on the security software issue.

Similar Messages

  • Visual Studio 2010 Upgrade - Unable to view some reports

    I converted an application that had been developed in VS2005 so that it would run in VS2010.  The application contains several Crystal Reports.  Now when I debug the application I can only view some of the reports.  With the others I get an exception with the message "Unable to find the report in the manifest resources.  Please build the project and try again." 
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource.  I have tried removing a report from the project and then adding it back, but that made no difference.  A new report displayed fine. 
    Does anyone have any ideas about what could cause some of the reports to throw this exception?

    OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
    And here is what I posted to start the thread that I am replying to:
    I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
    Does anyone have any ideas about what could cause some of the reports to throw this exception?
    As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging.  I have also tried deleting a report and adding it back in but it made no difference.
    Is this enough information?

  • Unable to view some iviews in the portal

    Hi,
    We are unable to view some of the iviews in the portal. For example i go to System Administration>System Configuration> I should see portal content and the list of systems etc but i get a Page Cannot Be Displayed error. But we are able to view this on the server machine. The server is in a different network. What could be the problem. We have EP 7.0 .
    Regards,
    Sridevi

    >But we are able to view this on the server machine. The server is in a different network. What could be >the problem. We have EP 7.0 .
    If you are able to see into Server then it means IViews are working fine, then it seems to be network issue, the applciaiton might be blocked so you can check the network setting.
    Regards,
    Subhash

  • I am unable to view some (but not all) videos in Firefox. But I can view ALL videos when I use Internet Explorer. Please help. I do not want to use IE.

    as stated, I am unable to view some videos in Firefox, but I am able to view them when I use Internet Explorer. How can I view all videos when using Firefox. Thank you.

    That is Flash.
    You do have the Flash player installed according to your More system details list, so Flash should be working.
    *Shockwave Flash 10.3 r183
    *http://www.adobe.com/software/flash/about/
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I am unable to view some images sent by email or on certain websites.  How do i fix this.

    I am unable to view some images sent by email or on certain websites.  How do i fix this.

    Hi. I'm not technically skilled, but based on the reply from the other guy re. AdBlock Plus being the common denominator to everyone's problems, I checked my Filter settings (ABP version 2.0.3) and deselected 'Fanboy's List (English)'. With this deselected and ABP still 'enabled' the messages work as usual.
    I only had this problem using Virgin Mail, so must be the way they now present their mail that conflicts with 'Fanboy's List (English)' filter. I guess I'll need toi choose another filter.

  • Unable to view some ESPNFC content on Firefox Beta23, probably Flash/JS issue?

    SO I am unable to view some ESPNFC.com Content(And a few other websites which i do not recollect at the moment) when i click on any new links from home page(No Image displayed)
    It works just fine on Chrome and IE-10, I am on the Beta Update channel (Version 23) and have tried the following:
    -Updated all plugins / uninstalled and installed Flash and Java Plugins
    -Reset Firefox , Started with safemode,uninstalled, removed all plugins like Flashblock and AdBlock
    -Tried everything from here: https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems
    - Also tried a variety of options from Google including updating About:Config etc etc, nothing seems to work
    I can provide a list of all my plugins if that helps but since i have tried removing all plugins/add on's and it didnt work I do not know if that would be of any help.
    I would have loved to post some screenshots to show the exact nature of issue, nevertheless it would be gretaly appreciated if any one help..
    I am using Lenovo(Ideapad p400 Touch) windows 8 machine and have had this issue since first day i got the machine.

    Just adding some screenshots for the issue on Firefox and working verson of the same on Chrome.
    One interesting thing i noted is the url changes on Firefox (adds a topid to the link ,bu chrome and IE keep the url as http://espnfc.com/?cc=5901 when i switch to the stories on the home page)
    Also, this issue only happens to the stories on home page, website seems to work fine on other pages.

  • Contacts closing when viewing some contacts

    When I try to view certain contacts on my 3G, the contacts app closes by itself. I can view some contacts with no problem but with others, the screen goes black and then returns to the home screen. I have a feeling it has something to do with the notes attached to the contacts, but I can't find any pattern. Any suggestions?

    Thank you for the advice; I found the problem though. The notes were too long in my outlook contacts list that I am syncing with. I am actually having my Act db sync with Outlook which syncs with the iPhone. I ended up deleting all the contacts out of Outlook and off the iPhone. Then I told Act to only sync two of the last customer histories –rather than the 10 that I was syncing. Then I synchronized the contacts with outlook again and then reloaded them onto the iPhone. Now I can open and view many of the contacts that would previously cause the contacts application to close (I haven’t tried them all as there are over 1,000 contacts).

  • Unable to view some performance counters

    Hi
    I am running Exchange 2013 Mailbox Role on a Windows 2012 Server and in Perfmon there are a few counters which I am unable to view, eg:
    MSExchangeTransport Queues\*
    I can see the counters, and add some to the right hand pane, but when I click
    ok the counters do not appear
    I have run the re-register perf counter Powershell script to no avail
    I have run lodctr /q but none are disabled
    The counters are visible in my lab environment - which should be the same as production (!)
    Maybe it is a permissions issue but I cannot see a difference
    thanks
    shapi

    Hi,
    Though you mentioned lodctr /q is tried, please see if the steps provided in this article could help rebuild your performance monitor settings:
    How to manually rebuild Performance Counter Library values
    http://support.microsoft.com/kb/300956
    If issue still exists, please check if there is any error when failing to add a counter in Event Viewer. 
    If you have any feedback on our support, please send to [email protected]

  • Unable to view 3rd contact number in jabber.

    Hi ,
    We have recently moved to cisco jabber 9.x  from CUPC.
    Post implementation we have observed that we are able to see only 2 contact numbers ( Work, Mobile). But in CUPC we can view 3 contacts (Work,Mobile,Other). Customer is asking to add another conctact no also in jabber.
    Below is my jabber-config file.
    <config version="1.0">
    <Directory> 
    <DirectoryServerType>UDS</DirectoryServerType> <BusinessPhone>ipPhone</BusinessPhone>
    <OtherPhone>telephoneNumber</OtherPhone>
    <HomePhone>homePhone</HomePhone>
    <PhotoUriSubstitutionEnabled>true</PhotoUriSubstitutionEnabled>
    <PhotoUriSubstitutionToken>sAMAccountName</PhotoUriSubstitutionToken>
    <PhotoUriWithToken> http://10.90.147.25/j2ee/portal/emp_tel_dir/emp_pic_8/sAMAccountName.jpg </PhotoUriWithToken>
    </Directory>
    </config>
    Can someone help on this ...??
    Thanks in Advance....!!!

    >
    vicky sai wrote:
    > Hi Experts,
    >
    > We are maintaining PAN Number in 0185 IT with subtype 02.
    >
    > We have the maintained singlefield PANID as table field ,output length:12, and Table p0185.
    >
    > What modifications should we do get the PAN Number in the payslip.
    >
    >
    >
    > Please advice,
    > Vi Sai.
    just check this note 1370082 it will solve ur problem..

  • Unable to view some websites/photographs not appea...

    Hi - first post here, hopefully not one of many.
    A week past on Monday, I received the HH3 having upgraded to option 2.  Plugged in the Ethernet cable and away I went.  No problems, then I about a day later I found I couldn't log in to my Amazon.co.uk customer account.  Nor could I view some photographs or they would take a fair bit of time to appear on some websites.  Amusingly, I could not view the PC World website either.  This persisted on both my laptop (Explorer) and desktop (Firefox).  Yet, when using other PCs, through BT Broadband at relatives houses, there was no problem.  Nor was there a problem using 'packet data' on my mobile phone.  Yet if I used BT Broadband through the mobile, the same problem was experienced.
    I came back from holiday on Friday to find that I could once again use my Amazon customer account and no issues of the type described above were experienced.  Then last night....same problems yet again.
    Finally, after two hours of checking Broadband speed and everything I could think of, I phoned the support line this morning.  The conclusion the operator arrived at was that there was a problem with the Amazon website.  However, problems were persisting at other websites including Geograph.co.uk where map data was not appearing or some photographs not appearing.  Then, miraculously, about 20 minutes after I finished the support line call everything was working fine. 
    Then later in the afternoon....back to square one.
    This is incredibly infuriating - any idea what the issue could be?  To my mind it is definitely to do with Broadband at my home...

    It would be best if you totally removed the BT software, and did not re-install it at the moment. Its not actually needed to connect to the Internet.
    All you needed to do was to just plug in an Ethernet cable and it should just work.
    You can access the hub manager from this address http://192.168.1.254
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Does anybody know why i am unable to view some youtube videos?

    when i try to view some youtube videos it says it currently unavailable. i have no idea why it is saying that. do i need to download something in order to view the vidoes?

    Post a link of the videos you are having issues with for other users to test out for you.

  • Unable to view some datasources  in CRM

    Hi Friends
    I am unable to see the following extractors
    0BPARTNER_TEXT
    How to find this datasource and activate it.
    It is not availabel in RSA5.
    Please help me.
    Regards
    sundaresan

    thanks for your information bhanu but i dont see that node.
    I think we have to go for higher support pack.
    Please share your thoughts.
    Regards
    sundaresan

  • Unable to view some things

    I just installed Mozilla Firefox and now I can't see everything on my FB page .. like the notification icons .. I can see the # if there a notification, but .. and also if I try to type lets say a smiley face :) .. it doesn't show it to me

    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    If images are missing then check that you do not block images from some domains.
    *Tap the Alt key or press F10 to show the Menu Bar
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Besides being unable to view some images on some pages, some windows open too wide inside the current window. If I start up in safe mode, everything works OK. But if I disable all extensions and add-ons, I still have the problem.

    Too long

    This had no affect on my problem. Sorry, but no help at all. I can enter safe mode with nothing checked in the dialog and the problems go away. Any further ideas?

  • E learning - unable to view some swf files.

    Hi,
    i have been attempting to complete the sales executive training and have found a number of the swf files do not display/run as expected.
    If I choose English and try to run the file online i get to see the Launch Flashbook button and another screen opens automatically but is completely grey.
    Others that successfully open ask to allow https content question and play perfectly.
    If i download the files i get the same responses.
    I have tried various PC's and get the same issue.
    An example of the file i am having trouble opening is :- "Synchronized CEL Sales Process" which is within the Level 1 Sales Professional Qualification.
    Has anyone else experiance a similar problem?
    Regards

    Hi Barry,
    The problem is due to flash player 10 compatibility.
    If you are watching the courses from an earlier DVD, you should use Flashplayer 9
    Most courses online are now flash player 10 compatible.
    Peter

Maybe you are looking for