Unable to view Songs in Content Screen in iTunes

When I connect any Shuffle to iTunes, the Setting screen displays information accurately. However the Content screen is empty of any songs, even though the Setting screens shows that I have used up disk space for my songs. When I then try to add a new song, all the existing songs on my shuffle are erased and only the new song is now found when I play the shuffle. Why would this be happening?

No. That is what I noticed. If they are in the library the contents of the shuffle display. When I remove them, the songs no longer display on the shuffle.
When I use an iPod classic, I see the songs on my iPod, even though they are not in my libary. Its only in the shuffle that they seem to need to be in the library. Is this the way the shuffle works, versus the classic?

Similar Messages

I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Unable to view some ESPNFC content on Firefox Beta23, probably Flash/JS issue?

SO I am unable to view some ESPNFC.com Content(And a few other websites which i do not recollect at the moment) when i click on any new links from home page(No Image displayed)
It works just fine on Chrome and IE-10, I am on the Beta Update channel (Version 23) and have tried the following:
-Updated all plugins / uninstalled and installed Flash and Java Plugins
-Reset Firefox , Started with safemode,uninstalled, removed all plugins like Flashblock and AdBlock
-Tried everything from here: https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems
- Also tried a variety of options from Google including updating About:Config etc etc, nothing seems to work
I can provide a list of all my plugins if that helps but since i have tried removing all plugins/add on's and it didnt work I do not know if that would be of any help.
I would have loved to post some screenshots to show the exact nature of issue, nevertheless it would be gretaly appreciated if any one help..
I am using Lenovo(Ideapad p400 Touch) windows 8 machine and have had this issue since first day i got the machine.

Just adding some screenshots for the issue on Firefox and working verson of the same on Chrome.
One interesting thing i noted is the url changes on Firefox (adds a topid to the link ,bu chrome and IE keep the url as http://espnfc.com/?cc=5901 when i switch to the stories on the home page)
Also, this issue only happens to the stories on home page, website seems to work fine on other pages.

Unable to view movies in full screen

I am unable to watch movies in full screen mode. When I try and select it, I am simply taken back to the itunes window, but the movie audio continues. I can watch the movie at any other size. What's going on?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Unable to view sent mail content

Has anybody had the problem of not being able to view sent mail content in the sent mailbox? When a message is selected from list, the message "The message from XXXXXXX <[email protected]> concerning “title” has not been downloaded from the server. You need to take this account online in order to download it." when I try to view a sent message. This issue applies to all the sent messages in the sent mailbox, I can see a complete list of messages, just not the content?

If this is a POP account and you’re running Mac OS X 10.3 (Panther), as your profile indicates, you probably have the problem described here:
Overstuffed mailbox is unexpectedly empty
If you’re just starting to experience the problem, doing what the article suggests might work. If you’ve let the problem to become worse over time, however, it may be too late to solve it as described in the article.
Because of the differences between Mail 1.x and Mail 2.x, further discussing your problem here might confuse other users with apparently similar problems running Mac OS X 10.4 (Tiger), so please start a new topic in the Mail & Address Book - Mac OS X 10.3 & earlier forum, or just look for other threads discussing the same problem there. This is actually a FAQ in that forum.

Unable to view folio in Content Viewer... folio not loading

For the last week I have been unable to load any folio and view it on the Adobe Content Viewer on my iPAD. This is getting very frustrating. I have tried rebuilding it. I have tried using properties, V27 and V28 - both unsuccessfully. This problem has been going on for over a week. I really don't know how to fix it and there is nothing that is understandable on the FORUM.
PLEASE can an ADOBE STAFF member address this issue.
I have deadlines to make it work, there seems to be a very great lack of communication from ADOBE on this issue inspite of what I am reading on the forum.
I can build it in InDesign, but when I have the iPad Attached to my computer and I open the content viewer app nothing shows up. Also when I go on to Adobe's site it isn't there either.

Our help topic on how to preview content is available at http://helpx.adobe.com/digital-publishing-suite/help/preview-folios-articles.html.
If you are on a Mac the best way to do this is to use preview on device. The steps for getting that set up are in the article I linked to above. If you are on a PC you'll have to upload your folio to our servers before it'll show up in your content viewer. By default your folios will be created offline, but you can upload them from the Folio Builder panel flyout menu.
Neil

Unable to view project in full screen mode.

I'm working on three different imovie projects, and they are all in my project library. For two of the three projects I have no problems viewing them on the full screen mode, but the one that I'm currently working on won't play full screen when selected, it plays a different project. I called Icare support, and they said the problem wasn't in the program, but rather in the project. They suggested that I post my question here on the Apple Message Board to see if they are any suggestions, otherwise, I'll have to rebuild the project...I've spent two weeks working on it...ouch!

Think of Full Screen Mode like a browser that let's you watch a movie. If you stop before it ends, it remembers your place and lets you take up where you left off the next time you come back.
Move your cursor down toward the bottom middle of the full screen view. You will see a cover flow view, and you can select the project you want to view.

Unable to view JCos in Content Administration

Hi,
I had created two JCos in Content Administrator, the message "JCo successfully created" was displayed for both....however they are Not visible in "Maintain JCo Destinations".
I can view these 2 JCos in SLD.
Could anyone let me know where the issue is.
Regards,
Siv

Hi,
In Maintain Jco destinations tab.. have you viewed all jco destination details. I think it should be there if it is created.
Regards,
Shanker

Unable to view local HTML content from "Help Content Only" SSL iFrame

Hi
Can anyone confirm whether it is possible to view local HTML files within an iFrame when generating Help Content Only SSL content which is also locally deployed?
I have had no problem viewing local html files from within an iFrame with a locally viewed Browser-Based Help project but despite trying a number of variations on the syntax, I simply cannot obtain the same result from a Help Content Only SSL that is then incorporated within a merged help system. I can however create hyperlinks to view local content using the following syntax (file:/C:\folderName\fileName.html - the only drawback for local preview is that you must right-click and select "open in new tab"). Essentially, I am trying to eliminate the requirement to have to right-click and open in new tab to view local html files.
The project I am working on is deployed both locally and remotely and this whole process is necessary for emergency management and business continuity purposes.
I hope my explanation isn't too convoluted and would be glad to clarify it further if required. I would appreciate any assistance!

Hi John
I appreciate you and Peter obtaining this information from Adobe and I appreciate your continuing patience in trying to understand what I am doing.
I will start from the beginning and hopefully clarify my process when deploying my application locally (my remote process differs somewhat but is not germane to this discussion). Obviously this will contain some repetition from previous posts but I hope it helps...
The project itself integrates content created from Adobe RoboHelp with content created within Adobe Dreamweaver
First, I should mention that I am using RoboHelp 8 as I don't believe I have addressed which version I am using. There's nothing particularly unusual about the project itself.
Utilizing Dreamweaver I have created a self-contained HTML-only (no server-side functionality) website which is placed at the root level of the C: drive
Within the RoboHelp project I create a hyperlink to access the local HTML files from the RoboHelp topic pages. The process I use to do so is from within the HTML view of the specific topic page and I use the following file path: "file:/C:\folderName\fileName.html". The only end-user requirement is that they must right-click and select "open in new tab", otherwise the link does not work. Please note, this is ONLY required for accessing the local HTML files.
I output my RoboHelp project using the Adobe Air SSL, with the output type set to "Help Only Content" which creates the .rha files. I utilize multiple .rha files within my project as each .rha file constitutes a module specific to an individual municipality (in my particular instance)
I use the Help Viewer Wizard from the RoboHelp "Toolbox" pod to create what I refer to as the "shell" .air file. Once the "shell" .air file created from the Help Viewer Wizard is installed, it creates a shortcut on my desktop.
I place an XML .helpcfg file within the directory on C:Program Files where my "shell" .air file has been installed to reference each .rha module which must be placed at the root level of the C: drive in order to be properly referenced by the .helpcfg file
By double-clicking on the desktop shortcut created in Step 6 it opens the "shell" module which, in turn, loads in each individual .rha file which can be accessed individually from the drop-down menu in the top-right corner
Why do I do it this way?? My organization severely restricts admin privileges on our workstations. We have one IT person / several hundred officers so I needed to create a system where the only time we need IT assistance is in the initial installation of the "shell" .air file created from the Help Viewer Wizard and placement of the .helpcfg file within the C: Programs folder. Once this is done, because the .rha files are on the C: drive, I can swap these out and update as necessary (we currently have an annual renewal cycle) and we require no further IT intervention. The local system I have just described has hyperlinks to the online browser-based help so that users can also access it and see any content updates made throughout the course of the school year
Having said all that, based on the model I have just described, I have been trying to create iFrames from within my RoboHelp 8 topic pages (placed on my C: drive) to access the local HTML Dreamweaver site (also on my C: drive). The problem I have been having is that the resultant iFrames display only a blank white page and I have tried a number of variations on the syntax of the file path without success.
The process I have been using to create the iFrame is as follows:
In Design view, select Insert >> HTML >> iFrame
In the iFrame dialog box, provide a name for the iFrame and then navigate to the local file on my C: drive level Dreamweaver HTML-only website that I want to link to.
Click "Apply" and from the resulting dialog box states that "This action will create an external link to the help system... Do you want to continue?", I click "Yes"
The resultant file path is "../../../../../folderName/fileName.html" which obviously won't work but I have created the iFrame and now I switch over to HTML view and insert the file path that I have been using for the hyperlinks ("file:/C:\folderName\fileName.html"). I also modify the width to 100% and the height to 1000 px
The user is not being directed to a different domain. So, if as Adobe states, that iFrames are "supported in local AIR Help (.rha) as well" then I don't know why it will not work for me. Again, this is the file path that allows me to create a hyperlink which will access my local Dreamweaver HTML files: "file:/C:\folderName\fileName.html" so if that syntax works for a hyperlink, why will it not work for the iFrame?
The videos I referenced are also contained within the local Dreamweaver HTML site
My usage of the term "merged help" may have been unclear and hopefully steps 1-8 outline what I am doing
Again, I am very grateful to all who have joined this discussion to try to help me! I think it should be manifestly evident by now that I am self-taught and basically that's the only excuse I can offer in my defense for my poor articulation. Not too many years ago I wanted nothing whatsoever to do with computers!

Unable to view my Imovie working screen

I work with a two screen system.
recently had to disasemble my system.
When I put it back together, I have lost the working platform of Imovie.
It is present, I can see it if I command new movie, but otherwise cant see it.
It seems to be located in a virtual screen on my right.
I think it is only a setting, but can't figure it out.
Any advise anyone ???
Tks,
Syl

<<<Supported browsers seem to be your first issue. IE version 6 is out (version 7 works). Firefox is another option.>>>
Do you mean IE version 6 does not work?
I doubt if I can be telling everyone what they need to view my movie on mobile me.
Any suggestion for easiest way to publish movie so that the average user can view it without a lot of trouble. I tried YouTube, but my movie is 11.4 mins. and limit is 10.00 mins.
Thanks, George

Unable to view picture in full screen

When I double click a picture in iPhoto, it brings up a black screen. Same thing when I try and do a slideshow -- the pictures do not show up. Any ideas on what I am doing wrong?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Unable to view songs in Nokia C5 MobilePhone

Hi,
I downloaded the Nokia C5 PC-Suite software and connected the nokia C5 to the PC via USB and selected PC-Suite on the mobile.
When opened the Memory card, I did not see any folder with name songs. I added new folder with name songs and added few mp3 songs to the folder. Disconnected the phone. And tried to open the songs through Mplayer in phone, it does not list any songs it displays message nosongs.
Can anyone please let me know the issue here ? or the procedure to add and play songs in Nokia C5?
Thanks,
Khan

Well i got the procedure to list the newly added songs in C5,
Open Mplayer->Options->Refresh , it will list all the songs.

HT1498 it takes foreverrrrrrr! to upload a movies from Itunes to my Ipad2 or Ipad3? Get errors that say unable to view movies or content cannnot be viewed? I e-mailed advanced support at Itunes and got no help?? Thanks D.

Please, help with the question above about tne HUGE PROBLEM of uploading a movies to my IPADS.Thanks

The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Unable to view Songs in Content Screen in iTunes

Similar Messages

Maybe you are looking for