Unable to view stock on a posting date

I'm implementing inventory scenario in BI.
Initialized the stock in R/3 and uploaded into cube 0IC_C03 through 2LIS_03_BX.
Also initialized 2LIS_03_BF and uploaded into the same cube.
When i run a query, I see opening stock.
But if i change posting date to view stock for that date, I dont see any change in quantities.
Seems like the material movements are not being captured into BI.
Please help...
Thanks in advance

Elangovan,
yes, with 2LIS_03_BF, 888 records were added.
I compressed both requests, 2LIS_03_BX WITH marker update and 2LIS_03_BF with NO marker update.
You asked about maintaining markers, not sure if there was anything else to be done?
Also, please help me with the transaction keys...not sure what that is. I'm new to inventory management in BI.
Thanks

Similar Messages

  • Stock Value on Posting Date

    Hi SAPians,
    I can get Stock Quantity on Posting Date from report MB5B.
    Is there any Report which can give me Stock Value on Posting Date?
    I have searched a lot but yet not found it.
    Please help in this regard.
    regards,
    Jignesh

    Thanks a lot friends for your answers.
    i have execute report and analyzed it but i have one query.
    If i am executing report for 31.03.2008.
    The shown material Stock Value on 31.03.2008 is on the basis of MAP at 31.03.2008 or on the basis of MAP at Current Date.?
    Thanks in advance.
    Regards,
    Jignesh

  • Bapi/function module to get opening or closing stock for a posting date

    I am creating a report where i need to get the opening stock value and closing stock value  for the given starting date and ending date respectively for the PP report.
    The T-code for that is MB5B.
    So,can any1 plzz tell me how i can get the stock value for a starting date/ending date...
    Is there any BAPI or function module to find this out..
    or any logic?
    Thanks.

    Hi Kiran,
    You would like to findout opening and closing stock of a particular period and of a particular period....
    If we would like to findout opening and closing stock of material A as of 18 / 8 / 2008,
    then do like this.
    go to MBEW table .. there u get opening stock as on today. Today the date is 20/8/2008. from today's opening stock if we add / subtract the movements which have happened on 19/8/2008 and 18/8/2008 u'll get opening and closing stock as on 18/8/2008.
    U get the movements from MKPF ( material doc header) and MSEG (material doc item ) based on posting date. In MSEG u get movement type.
    If the movement type is 101, it means the stock is added.
    If the movement type is 102, it means the added stock is reversed.
    from today's opening stock deduct the stock with moverment type 101 and add the stock with movement type 102.
    This will give u opening stock as on 18/8/2008.
    To get closing stock of 18/8/2008 ..... the opening stock of 19/8/2008 is 18/8/2008's closing stock.

  • Unable to view photos that others post on facebook since upgrade

    was able to view photos that friends posted on facebook until ungraded to current version of firefox. Now those photos are just blank white spaces.

    You can use these steps to check if images are blocked:
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.com/kb/Images+or+animations+do+not+show

  • How to view purchase orders by posting date.

    Hi,
    I am trying to review what purchase orders were received in 2007 but were created in 2006, it appears that it has to have the delivery line in the purchase order set to 2007, rather than using the posting date.
    Can anyone suggest any other reports than ME2L

    Hi,
    There is one way that might work but it all depends on whether you use internal numbering for your POs? (most people do).
    Just find out the largest PO number raised in 2006 (from EKKO in SE16N or similar.
    Then use MB51 to look at all 101 postings for 2007. When you get the list, click on the "detail list" icon (the one that looks like a spreadsheet with the first column in  blue.
    Then when the detail list is displayed clcik on Settings > display variant > current and add in the PO number to the display. Then you can filter out all of the POs with a number less than the first PO number used this year.
    Viola, you have your list !
    Steve B

  • STOCK QUNTITY on posting date at a plant level

    I need the stock quntity , issue quntity , reciept quntity and averege quantity at <b>plant level</b> for a period of<b> week</b>, and <b>month</b>
    Is there any function that can do it or any table that has those detailes or any program?

    Hi,
    Check S031 table. It is a LIS info structure which store all goods movements in your system. But the key would based be on the variant your system configured to. I mean it will be either by Fiscal period/ Week/ Calendar Month for plant material.
    Hope this will give you some clue.
    Regards,
    Nagaraju Chidurupalli.

  • Unable to view images but all other data is present

    Importing images into lightroom 3.6 shows
    1. The expected number of of frames .... but all are blank
    2. The correct listing in the library index
    3. The data for each image shown in the development mode ... as is the spectrum graph
    I am using an up to date version of Win 7.
    Any ideas 

    Hi Hal
    Many thanks for your help – all is now up and running.
    You are a STAR
    John

  • Stock on posting date GL wise

    dear sir,
    can i have the transaction code for stock on posting date GL wise.
    IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATE

    Hi,
    There is a posting date in MB5B  !!!!!!!!!!!!!!!!!
    The whole point of MB5B is to give you the stock on a posting date.
    The field is called "Selection date".
    Steve B

  • Restrict goods issue if stock on posting date is zero

    Requirement:
    Current Inventory period : July 2011
    Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
    I upload stock of material  or GRN occur on 31.07.2011. Say Quantity u2013 100
    Now stock as on 31.07.2011 is 100 in MB5B
    Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
    Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
    After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
    I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
    Please suggest

    Hi,
    This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
    An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
    Hope this explains the technical issue.
    BR
    Raf

  • Stock at a certain date.

    Hi,
    how can I find the quantity of stock at a certain date ?
    Yours truly

    Hi
    Use transaction code MB5B for stock on a posting date.
    Thanks & Regards
    KK

  • Stock upload - Goods receipt date, FIFO

    We are doing our initial stock upload using LSMW based on goods movements.
    When posting a goods movement the posting date will be used for FIFO considerations.
    That's fine when your system is operative, but during the initial stock upload the posting date will be the same for all movements, which is not what we want.
    Is there a way to transfer a GR date from the legacy system?
    (Opening the posting periods to any date in the past is not an option).
    Any ideas?
    Thanks
    Andreas

    If you had a GR on May 2nd of 1000 and another GR on Oct. 1st for 500  and your currect stock is 800, then you just know that the last GR date was Oct. 1st. But this is not the truth for all stock on hand. So FIFO cannot work. So the field has just information caracter.
    SAP will capture such info at batch level. Different software, different concepts. so each batch can have its own last GR date, and you distinguish the stock by batches, and can use batch search strategy to find the oldest one.
    Without batch managment, SAP has this information about last goods receipt at quant level in warehouse managment.  Do you use WM module?
    (even then I have no standard solution to manipulate this field while doing the stock load)

  • Inventory: Movement after count with post date before the count date.

    Hi,
    We have stock movements all the days of the week.
    We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
    Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
    We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
    How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
    Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
    Thanks in advance for your support!!

    SAP takes the book inventory in the moment you enter the count.
    Best you set  block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
    If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
    This is not a good way if you still have movements after inventory document creation and actual count.
    You have to make sure - organisational  wise, outside SAP - that all movements that happened before inventory count  are posted before you start entering the count. There is nothing in SAP that can help you in this case.

  • Unable to change stock posting date at usage decision while inspecting HUs

    If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
    So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
    Anyone?
    Seba
    Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AM

    I solved it in this topic: Changing posting date at usage decision for handle units. How?

  • Display stock on posting date for a consignment stock

    Dear guru.
    I want to display the stock on posting date for a consignment stock (special stock indicator = "W" ) to display this stock and the linked movements  for a specific customer.
    MB5B donu2019t have the field customer in the selection view.
    What transaction can I use ?
    Thanks in advance.

    Hi,
    In MB5B in special stocks indicator you select W
    and select special stock
    You will get it
    BR
    Diwakar
    Edited by: diwakarnd deshpande on May 20, 2008 7:02 PM

  • Any Standard FM  for material stocks on posting date  using  Tcode  MB5B

    Hi,
    I  need   Standard  FM  to get  material stocks on posting date  using   Tcode   :   MB5B
    Stock type  i am using  is  : Storage Location/Batch Stock
    the  Input   i am  providing  is    Material, Plant , Storage Location, selection  date From , selecDate To.
    Then   i need  to get  data  that it  provides   header  and  document  item level.
    Can u please tel me  how do i get  that  material stock data  on posting date and in which tables
    it will be populated in the database.
    ITs required  can u take view and post info
    Thanks & Regards
    sivakumar kasa
    Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
    Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

    hi Rehan,
    I have checked all settings also enhancement  but there is no as such control to restrict backposting within current period
    I think its self disipline action not to post backdated GI when GR is done on later date
    Vishal...

Maybe you are looking for