Unable To View Templates Installed By Dreamweaver

I Am new to Dreamweaver (I have used Frontpage) and just
installed V8.02, so please bear with me. I have looked into the
Help Files and Searched Forums, but cannot find the answer.
When I try to base a website (or a page) on a Template, The
list appears empty (see Link Below):
Use
A Default Template
I Saved a webpage as index.html and attempted to use: "Modify
>Templates>Apply Templates To Page...." and got the results
below:
Apply
Template to Page
It does not list any templates....
What am I Doing Wrong?

Where did you get these templates?
DW uses the following setup for templates -
* the template must be named with a *.dwt extension
* the template must be saved in the Templates folder which is
at the root
level of your currently selected site. If you have not yet
defined a DW
site, please do that first.
* all links in the template files must BE CORRECT BASED ON
THE TEMPLATE
FILE. Thus, a link to an image in the template file must look
like this -
<img src="../images/image.jpg"
or this -
<img src="/images/image.jpg"
or this -
<img src="
http://www.example.com/images/image.jpg"
* if you have a *.dwt file in the Templates folder at the
root level of the
current site, it will appear in the list of templates
available for that
site.
You need to satisfy those conditions first.
If you want to COPY
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SierraTech.Net" <[email protected]> wrote
in message
news:[email protected]...
> 1. Have you created a template file? "NO"
> 2. Is the template file named with a *.dwt extension?
"Yes" See list
> below:
> _AH_Master.dwt
> _AV_Master.dwt
> _folderinfo.txt "Text File states these are Page
Designs"
> A_ArticleA.dwt
> A_ArticleB.dwt
> A_Cart.dwt
> A_CatalogA.dwt
> A_CatalogB.dwt
> A_Compare.dwt
> A_DetailA.dwt
> A_DetailB.dwt
> A_EmailPage.dwt
> A_FiguresGrid.dwt
> A_FiguresList.dwt
> A_HorzPic.dwt
> A_Journal.dwt
> A_Login.dwt
> A_Register.dwt
> A_Results.dwt
> A_Search.dwt
> A_SendEmail.dwt
> A_Service.dwt
> A_SlideShow.dwt
> A_Specs.dwt
> A_StoryA.dwt
> A_StoryB.dwt
> A_Survey.dwt
> A_ThumbnailGrid.dwt
> A_ThumbnailList.dwt
> A_Upload.dwt
> A_VertPic.dwt
>
> 3. Is the template file saved in the "Templates" folder?
---> The
> installed
> folder I was looking at is:
>
>
D:\Program
Files\Macromedia\Dreamweaver
> 8\Configuration\BuiltIn\TemplatesAccessible
>
> I assume you mean the ROOT Web Folder.
>
>
> 4. Is the "Templates" folder saved at the root level of
the site? ---> I
> saw
> this in the tutorial, have I confused default Page
designs with templates?
> If
> Dreamweaver came with templates what is the best way to
transfer to the
> root
> level of the web?
>
> Thanks again, sorry I wasn't more explicit previously.
>
> -Bob
>
>
>
>
>

Similar Messages

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Unable to see SAP BusinessObjects Document Viewer template in 7.4 portal

    Hello Experts,
    We are looking to integrate dashboards created with BOBJ design studio into enterprise portal (NW 7.4). We have followed the steps mentioned in the blog Integration of BOBJ with SAP Portal.
    Namely:
    1. Taken the com.sap.businessobjects.iviews.par and com.sap.businessobjects.iviews.templates.epa files from the BI server
    2. Imported the EPA file into the portal
    3. Converted the com.sap.businessobjects.iviews.par file into EAR file and deployed it into the portal
    4. Created System alias for the BI system
    5. Configured SSO between portal and the BI server
    After doing these steps when trying to create the Business Objects iView we are unable to see the SAP BusinessObjects Document Viewer template in the portal. Can anyone let me know if we have missed some additional configuration that has to be done?
    Regards,
    Saurabh

    Hi Experts,
    Issue has been resolved. After importing the EPA file into the portal, we missed out restarting the portal. Once this was done I am now able to find the SAP BusinessObjects Document List and SAP BusinessObjects Document Viewer templates in the iView creation wizard.
    Regards,
    Saurabh

  • TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    Hi Jen.  My daughter just compleated her nursing program and is now working as a full time nurse.  Focus and study hard and soon you will be there too.  Now to the problem at hand.  I have the same problem.  I gave up on it and satisfied myself with my iPod without the upgrade.  Reason being I've read so many posts of people having problems after the upgrade.  But I'm sure other factors are involved.  Nevertheless here is the fix most say works to solve the problem:  What ever virus protection you have installed on your computer, disable it.  Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade.  Hope this works.   Charlie

  • Instrument I/O assistant error msg "Unable to view proterties​"

    Hi, NI's AE,
      I have re-installed many times NI LabView8.2(EV) + DAQmx8.3 on all
      in one SOC platform(X86) with WinXP(SP3) step by step, but all
      rebooting fail after DAQmx8.3 installed.
      Then I re-install pure WinXP(SP3) + LabView8.2(EV) + DAQmx8.9,
      rebooting ok.
      LabView simulated VI from template works well, however I got error
      "Unable to view properties" when I drag & drop "DAQ Assistant"?
      After google the related issue of "Instrument I/O Assistant error".
      I check the "Add/Remove S/W List" and "System Services" of window,
      everything seems ok.
      Attach file description :
        Add_Remove_List.jpg -
            No extra software installed, except NI's S/W.
        Add_Remove_NI_List.jpg -
        The key drivers, NI Instrument I/O Assistant & NI-VISA 4.0 &
            NI-488.2.2.46 all be installed well.
        NI Service List.jpg -
            NI's related service be well active.
        Instrument IO Assistant - Unableto view properties error.JPG -
            Drag & drop "DAQ Assistant" VI, popup error dialog box
            "Unable to view properties", not "Create New Express Task"
            form.
      Is there any compatible issue between LabView8.2 & DAQmx8.9 ?
    B/R
    Hank

    Sorry, forget attach file!
    Attachments:
    Add_Remove_List.JPG ‏99 KB
    Add_Remove_NI_List.JPG ‏132 KB
    Instrument IO Assistant - Unableto view properties error.JPG ‏77 KB

  • Unable to Uninstall Photoshop CS4 and Dreamweaver CS4

    it's been a couple of days since i tried out Photoshop CS4 and Dreamweaver CS4 to see how they compare to the CS3 versions, it worked fine and all till suddenly it stopped working, so i been trying to uninstall/reinstall to get it working under the free trial limit i still have left (27 days as of this writing) it still will not work.
    Sometimes i would install Photoshop/Dreamweaver and say an error occurred and some components were unable to install and would be unable to load the file even after doing what the instructions say...
    Same goes for when i try to uninstall both Photoshop/Dreamweaver, i would try to uninstall and would still remain in my program files...
    I am completely stumped on what to do, i can't even re-install photoshop/dreamweaver cs3 as well due to this...
    I am running on Vista 32bit SP1 Pack on HP Pavilion, i want to completely get rid of CS4 versions and go back to my reliable CS3 again, any help please would be greatly appreciated.
    Kantori

    John... if you read what I said you would of caught that i did do it:
    "did what was suggested, worked like a charm for the CS3 and Dreamweaver CS4 but although it did work on Photoshop CS4. it did something i was dumbfounded to see, it did something odd in which it took out the Uninstall/Change tab option for removing programs (I was viewing it to see if it uninstalled completely) also it brought out a bunch of programs that weren't in that section before and was unable to uninstall/remove them.
    So i had to do a system restore point to go back and try again. After doing it two more times (ya two!) still doesn't work, i am 7 hours into trying to resolve this... sigh. "
    At that time i said i had done it 2 times, 3 in total, i am on try #6 all with the same results with the exact after effects once i restart my PC.
    Here's what it does to tell what goes on:
    1) after installing microsoft's cleaner then opening up the cs4 cleaner under admin, it does its thing, it asks me if i wish to remove Flash Player 10 after choosing remove Photoshop CS4, now here i done both remove Flash Player and not remove it with the same results, losing the uninstall/change option on the control panel, which frustrates me.
    2) After seeing that i try to install Photoshop CS4 again, once its done, i open it up, try to go to the trial option where as i stated previously says there's an error and can't open the trial page which would open up Photoshop completely but since it can't i cannot go beyond that window.
    3) So ya... i try ONCE again to do it all over after restarting and SAMETHING! no uninstall/change option appearing and unable to open up Photoshop CS4 in which i resort to doing a system restore again and trying once more.
    NOW, one would think that after the first 3 times it should be working properly, i mean I thought it would after removing both Photoshop CS3 and Dreamweaver CS4 it's bound to do the same for Photoshop CS4, but it doesn't completely create a "FREASH" install. It's like it still remembers what messed up functions it still had and what's up with it removing the uninstall/change option? that just bogles my mind.
    i tried many things, re-downloading the trial from adobe, etc i never would of thought just one program could cost me so much wasted time just to get it working and it's a free trial nonetheless so excuse me John Joslin if your remark kind of bugs me, I need some assistance/advice on trying to correct this problem, not a
    "It should have done!
    Run it a few times. "
    comment that's already common knowledge for me in what I have already been doing long before your post.

  • Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

    I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

    Thanks Curt and 'Mylenium'
    I did re-set the prefs - but to no avail
    I checked and my graphics driver and audio is all up to date.
    No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
    Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
    Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
    Cliff

  • Unable to view the "Discovery Application" section under studio.

    Hello,
    I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
    I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
    However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
    But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
    Which is obviously used for creating and managing the applications.
    But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
    Can anyone kindly let me know why I am unable to view the discovery application section till now?
    Thanks.

    I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
    You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

  • Photoshop Elements 8 - unable to view RAW files

    Hi.
    I have been using Adobe Elements 8 since it came on to the market. I use Canon Cameras and my latest one being a 1Dmkiv.
    When I got the Canon 1D I down loaded the appropriate RAW file I think it was 5.6 and followed the instructions and changed the Camera Raw.8bi file and it worked perfect and I was able to view and edit Raw files.
    Last week my computer failed and I have had a new hard drive and hence have had to upload all my software. I installed Elements 8 back onto the computer and reinstalled the photograph catalogues I had backed up within Elements 8 before the computer crash.
    When the photographs in the catalogues were viewed only JPEG files were visible, the raw files are shown as a a grey negative with a zig zag across them. I thought that I would have to upload again the lates RAW update, which I did and went through all the instructions as given by Adobe. I changed the Raw.8bi file within Elements 8 and I still am unable to view any Raw files within Elements 8. I desperately need access to these files. Any help would be appreciated
    Best regards

    Thanks so much for your reply. My problem appeared to be that most of the thumb
    nails had lost their links and I had to individually update the thumbnails from within the program. It wasn't a problem
    with the RAW file not being updated.

  • How can I install the Dreamweaver 8 from my CS2 Creative suite?

    When I originally installed my Adobe programs for CS2 about 5 years ago, I did not at that time install the dreamweaver from the CD. Now I'm trying to download it, but it will not accept the serial number from the suite (Dreamweaver 8 was still from Macromedia back then, but was part of the Suite) so I am unable to activate the program.I'm using  hp pavillion a 1430n w Windows XP-Media Center edition. My Serial number is a series of 6 four digit numbers. The activation site will not accept nearly that many numbers, nor does it accept them in four digit combinations. Any suggestions ?

    If the serial number from the CS2 Premium suite is not working with the install, there is not much you can do at this point.  You can try to uninstall the whole suite and this time install all of the applications at once.  But you then risk the other applications.
    Your only other option is to pay the upgrade from CS2 to CS4.  Adobe, unlike Macromedia, does not restrict educational users from upgrading.  All they ask is that you pay the full retail upgrade price and they will allow you to have your license converted from a student license to a commercial license that will allow you to keep upgrading.  Or if you are still a student, you can opt to buy the new student release.
    Based on what I was able to look up online about your system, it meets the requirements for CS4 as long as you have upgraded to SP2/3 of XP. 

  • Unable to view the contents in NQS Config file

    Hi Forum,
    After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
    So please guide me in resolving this issue.
    Regards
    Cool j

    You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

  • I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

    I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • Slide show unable to view on a IMAC... any ideas?

    Hi ,
    I made a slide show on my pc and uploaded to website and shared (e-mail link) to family on a I MAC. They are unable to view. Any idea's?
    Thank you

    They probably need to install this. It's free and it lets macs see .wmv files:
    http://www.macupdate.com/info.php/id/17787/flip4mac-wmv-player
    Another possiblity is that their version of flash is too old:
    http://get.adobe.com/flashplayer/?promoid=BUIGP
    Finally, you don't say which version of OS X they're using, but there have been imac models for well over ten years now, so their machine/operating system could also just be too old.

  • Portal Runtime Error: Unable to parse template

    Hi!
    I integrated SAP BW system with SAP Portal. All the connection tests (Sap Web AS connection, ITS connection, Connection Test for connectors) run successfully.
    I also installed a BI add on u201CBI Administratoru201D on Portal and performed all the steps on SAP BI system.
    When I try to access one of the functions of BI Administrator I get Portal Runtime Exception on all the windows in Portal (bellow, in the middle, etc.).
    BI System Selection  
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 12:26_20/01/09_0013_21754250
    Refer to the log file for details about this exception.
    I have looked into log file for Portal and detected the following error text:
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException:
    Exception in SAP Application Integrator occured: Unable to parse template &\#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;
    /sap/bw/BEx?sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;accessibility=&lt;User.Accessibility
    [SAP_BOOL]&gt;&amp;style_sheet=&lt;LAF.StylesheetUrl[url_ENCODE]&gt;&amp;&lt;TrayInformation[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;Report&gt;&amp;&lt;BusinessParameters&gt;&\#39;; the problem occured at position 82. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;\#39;SAP_LocalSystem&amp;\#39;,
    Attribute: &amp;\#39;client&amp;\#39;.
    Question:
    How can I correct this error?
    Any helpful information will be very appreciated!
    Axel

    Hi Alex,
    It seems that the iview (of the type Application intergrator) cannot read or interperet the "client" parameter from your system object.
    I can also see that the systemobject-alias that is reffered to is "SAP_LocalSystem".
    Find the System Object called SAP_BW and see if all settings to connect to the backend are correct.
    In addition in the iview try to set the system-alias from SAP_LocalSystem to SAP_BW and retry.
    Good Luck.
    Benjamin

  • Unable to view FF reports in the front-end of FF 5.2 tool

    After installing the FF tool on Netweaver, I am unable to see the reports from the back-end (R/3) system. The R/3 system has the FF 5.2 RTA installed and a user Id defined to connect to front-end of FF 5.2.
    I configured the FF 5.2 connector, but still am unable to view reports from the front-end.
    any suggestions would be helpful.
    Thanks,
    Kapil

    I was able to resolve the issue by maintaining the gateway in the SAP adapter and running the transaction /VIRSA/ZRTCNFG on the abap side
    thanks for the suggestions
    Kapil

Maybe you are looking for