Unable to view the document- related to territory management?

Hi
In our project, the users are assigned to the territories via org positions. In a typical instance, out of the two users assigned to the same territories, one is able to view a document and the other is not. I have checked the position/ territory validity as well and everything seems to be right. The transaction is Budget Posting ( a custom one used in TFM scenario) and it doesnt have the check for territory management (otherwise usual in transaction types). Can someone give some pointers to solve this issue? The system is 6.0.

Verify that you installed correct version of System Center 2012 Visual studio authoring extensions successfully
http://www.microsoft.com/en-us/download/details.aspx?id=30169
Also you can refer below link
http://blogs.technet.com/b/manageabilityguys/archive/2013/10/20/visual-studio-authoring-extensions-for-visual-studio-2010-2012-2013-available-now.aspx
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Similar Messages

Unable to view documents - related to territory management?

Hi
In our project, the users are assigned to the territories via org positions. In a typical instance, out of the two users assigned to the same territories, one is able to view a document and the other is not. I have checked the position/ territory validity as well and everything seems to be right. The transaction is Budget Posting ( a custom one used in TFM scenario) and it doesnt have the check for territory management (otherwise usual in transaction types). Can someone give some pointers to solve this issue? The system is 6.0.

I pressume that this is not authorization issue.
Try check this..
Does the parameter for you is same like your teammate? (Transaction SU3)
To access the IXOS is there any custom table maintained to enter authentic user ID. Likely to chek with ABAPer.
In order to reset your user buffer go to SU56 and from the menu you will have option to rest the buffer. Alternatively you can get Security guys to do it in SU01(depends on table entry)/PFCG/PFUD...
Regards,
Arpan Paik

Unable to view the appraisal document in PMS

Hi,
We have upgraded our system from 7.01 to 7.4 and ECC from EHP4 to EHP7.
After upgrade we are not able to open the appraisal document from
Appraisal Inbox (Performance management) page/Employee & Reviewer Inbox
page but getting blank screen.
We had refer the note 1600380, according to the note we had checked the objects in all pages mentioned.
But then also unable to view the appraisal document.
Refer the attachment.
Kindly guide us to resolve the issue.
Regards-
Poonam

Hi ,
Before upgrade it was working fine, There is no change in the authorisation in the backend.
Kindly specify what kind of authorisation are required, so that we can check at our level.
No error messages and logs are generated related to this.
Regards-
Poonam

Unable to view all documents that have no checked in version due to exceeding the library threshold limit

due to exceeding the library threshold limit , unable to view all documents that have no checked in version

Hi niles, Here is a page that details how to retrieve all the files and take ownership of them via powershell to check them in:
http://www.demantprasad.com/2013/05/manage-files-which-have-no-checked-in.html
Mathieu Desmarais http://www.matdesmarais.com/

Unable to view the billing document created through vf01 tcode

Hi,
i'm unable to view the billing document which was created through vf01. when i want to display the document through vf03 it say document not created. As an abaper i'm not able to find any error..
Is there any configuration missed by the fn guy.

Hi,
While you are saving billing document i think you got Express document (please check in Transaction code SBWP :- Business work place of particular user). As per me the number range has completed for the particular document type(might be excise invoice also, if u have excise invoice auto generation functionality) that is why system is not able to update the invoice.
Hope this will be helpful
Regards
bvdv

An error occurred: An error occurred while trying to view the document

Now my partner meet a trouble about opendocument API.
There are 2 servers : one is partner’s web server ,which partner’s application run in; other is BO server.
The above servers are running on different servers.
There is a web page A , which is running in partner’s web server.
Page A includes a iframe, whose source is BO documents running in BO server via opendocument API.
In Chrome, the page A work.
But in IE, the page A don’t work, then get the error “An error occurred: An error occurred while trying to view the document”
You can see error.jpg
I have written the sample page to re-produce this error.
You can change 1.txt to 1.jsp
Welcome your advice.

Hi,
if it works in Chrome then this Problem is related to IE.
Maybe the URL is to long? IE can "only" handle 2048 Characters.
Regards
-Seb.

Unable to print the document thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Hi,
Please try to post in the Integration forum have some answers there.
Regards,
Clint

I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Unable to view the tabs to assign points?

Hi,
I am unable to view the tabs to assign points for the answers I have received.
Please look into the matter...
Title: Confusion Related to New G/L?
Discussion Body:
Hi,
Management is thinking for implementing New G/L in my Company and we have to prepare the presentation for that. I am not sure of few points though I have searched already but unable to find out anything which clears my doubts which are as follows:
1) Can we implement new G/L In-house or do we have to get it done from external sources or SAP only?
2) Can we achieve IFRS and GAAP reporting through segment reporting in house or not. Does that require any other cost as we are already on ECC6.0 but new g/l is not activated?
3) Is it mandatory to get the Data Migration done from SAP or can we do it In-house as well?
4) If one knows the approx. cost if we get it done from external sources at each point on in total at all the above mentioned points?
5) Is it so that partially we can do it and partially we need to take the help of the external sources?
Please reply asap.
Thanks in advance...
Regards
Nitin

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?

Unable to view the option register with ESB

Hi,
After installing SOA suite we are unable to view the option register with ESB on right click of fulfillment ESB in Jdeveloper .We had followed all the steps listed in the installation document still unable to resolve this issue.
Thanks in advance !!
Dhanesh

Cannot Register with ESB unless
1: full JDev 10.1.3.3 Studio Edition
2: Added Application Server in Connections Navigator
3: Added Integration/ESB server in Connections Navigator on that Application Server.

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

Unable to view the output of a concurrent program

Dear Members,
I am using Oracle R12.1.3 Vision Instance.
I have run the Create Accounting program. When I click on the view output button, the browser gets displayed and also gets closed immediately. I am unable to view the output.
Can any one please help me in resolving this issue?
Many thanks in advance.
Regards.

Dear Members,
I am facing the above problem in IE.
When I tried in Mozilla, I can view the outputs without any issues.
Can any one suggest me why I am not able to view the output in the IE?
Regards.

Unable to view the document- related to territory management?

Similar Messages

Maybe you are looking for