Unable to view the form in Mobile which was created using LiveCycle
When I click on the link to view the dynamic form it says "Please Wait" . please let me know your valuable thoughts.
Thanks,
Anusha
The "Please wait..." message is the shell PDF every dynamic XFA-forms lives in.
A PDF-viewer that doesn't support XFA technology will only display that message.
The fact is, that there is currently no PDF-viewer for mobile divices which will support XFA, even Adobe's Reader mobile doesn't support it.
Similar Messages
-
I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
BrianMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
The server was unable to save the form at this time. Please try again
Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any. -
Unable to view the "Discovery Application" section under studio.
Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs? -
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
Unable to view the MRP1 tab in Material master MM02
Hi all
In Material master some of one of the material i am able to view the MRP1 and MRP2 at the same time some of the other material I am unable to view the MRP1. Please help me to find out the root cause of the problem.
I want to view the MRP1 for other material.
Note: Purchasing group, Valuation class, Material Group are same for all the material.
Regards
K.GunasekarHI,
Whenever you create a material master record, you assign it to a material type. MRP1, MRP2 These attributes you will define of each material.
The material type for which you want to define MRP, Run Tcode OMS2, Select the appropriate material type from Dialog Structure and click on details Icon, In the User Departments Field select MRP and Save.
Next Time when you will create material using that Material type it will come automatically. -
Unable to view interactive forms that were archived using SAP ArchiveLink
Hello
We are just configuring Adobe interactive forms in SAP and are unable to view the documents after they have been archived in Livelink using SAP ArchiveLink. We have Adobe Reader v9.0 and SAP ECC 6 EHP 3, and Livelink viewer 9.7
When the viewer comes up the text of the error message is as follows:
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting
http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/
acrreader.html.
Can anyone help me out?
Thanks
SteveHi Steven,
I have a requirement where I just need to Archive Adobe form in External repository.
Since you are using the archiveLink functionality.
Can you please help me how you Archived Adobe form?? What configurations need to be maintained for this?
I am new to this. I did some Rnd on it and found that it can be achieved using HRFORM_HRF02 Business Add-In in the SET_ARCHIVE_INDEX method.
But I have no clue how to do it?
Can you please help me? -
Unable to view the tabs to assign points?
Hi,
I am unable to view the tabs to assign points for the answers I have received.
Please look into the matter...
Title: Confusion Related to New G/L?
Discussion Body:
Hi,
Management is thinking for implementing New G/L in my Company and we have to prepare the presentation for that. I am not sure of few points though I have searched already but unable to find out anything which clears my doubts which are as follows:
1) Can we implement new G/L In-house or do we have to get it done from external sources or SAP only?
2) Can we achieve IFRS and GAAP reporting through segment reporting in house or not. Does that require any other cost as we are already on ECC6.0 but new g/l is not activated?
3) Is it mandatory to get the Data Migration done from SAP or can we do it In-house as well?
4) If one knows the approx. cost if we get it done from external sources at each point on in total at all the above mentioned points?
5) Is it so that partially we can do it and partially we need to take the help of the external sources?
Please reply asap.
Thanks in advance...
Regards
NitinSome added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems? -
After idoc regenration unable to view the field in IDOC
Hi,
I have enhanced the business partner by EEWB.
After tha i have regenarted the message type CRMXIF_PARTNER_SAVE and bo type BUS1006 by Tcode BDFG.
After that also i am unable to view the field in Basin type CRMXIF_PARTNER_SAVE01 [message type CRMXIF_PARTNER_SAVE ].
New Zfield added through EEWB is available in CRMXIF_PARTNER_COMPLEX structre.But not coming in IDOC.
Please advice.
Regards
MalayHi,
From your thread i have understood that the EEWB extended fields have not appeared in the IDoc after regeneration.
For the customer enhancements there are some of the XIF segments provided by SAP to transport them to IDoc structure.
Now that you have added the customer fields using EEWB. Please add the fields
to CRMXIF_CUSTOMER_H and then regenerate the IDOC using BDFG.
After extending these above mentioned structure kindly regenerate the Idoc Structures. I recommend
not to add the enhancement fields to the CRMXIF_PARTNER_COMPLEX structure which might lead
to inconsistency.
You can make use of CRMXIF_CUSTOMER_H for customer enhancements.
Regards,
Venkat -
Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Unable to view the billing document created through vf01 tcode
Hi,
i'm unable to view the billing document which was created through vf01. when i want to display the document through vf03 it say document not created. As an abaper i'm not able to find any error..
Is there any configuration missed by the fn guy.Hi,
While you are saving billing document i think you got Express document (please check in Transaction code SBWP :- Business work place of particular user). As per me the number range has completed for the particular document type(might be excise invoice also, if u have excise invoice auto generation functionality) that is why system is not able to update the invoice.
Hope this will be helpful
Regards
bvdv -
For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?
Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards. -
Unable to view the output of a concurrent program
Dear Members,
I am using Oracle R12.1.3 Vision Instance.
I have run the Create Accounting program. When I click on the view output button, the browser gets displayed and also gets closed immediately. I am unable to view the output.
Can any one please help me in resolving this issue?
Many thanks in advance.
Regards.Dear Members,
I am facing the above problem in IE.
When I tried in Mozilla, I can view the outputs without any issues.
Can any one suggest me why I am not able to view the output in the IE?
Regards. -
Unable to view the Calendar Year/Month in the Query
Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJhi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks -
Unable to view the map in Topology
Hi Team,
Problem: In the NNMi console i am unable to view the map of container.
out of 10 container 9 are working, but 1 is having problem.
The error i am getting is " Could not compute the map view response due to exception"
Regards,
PrashanthYou probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.
Maybe you are looking for
-
Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help
-
Safarie crashes and will not reopen. Please see attached ETRECHECK & APPLE reports
Hardware Information: iMac (24-inch, Early 2008) iMac - model: iMac8,1 1 2.8 GHz Intel Core 2 Duo CPU: 2 cores 6 GB RAM Video Information: ATI Radeon HD 2600 Pro - VRAM: 256 MB System Software: OS X 10.9.2 (13C1021) - Uptime:
-
Photoshop Elements 8-Change of file format when saving deletes filename
I have been using Photoshop Elements 8 since last May and have always been irritated that when I add text to a photo it always defaults to PSD format for saving. I have gone to the preference options to see if I can set jpg as the default and it doe
-
Error in task -Downloading a file from report
Hi all, This is my code to download the content of report to Excel,Problem i am getting when trying to put heading for numerical fields .Its getting '0' in the heading .For remaining Fields which are non-numberic its displaying nicely.Could any one
-
I have a class that is parsing the standard date string to extract each discrete element using StringTokenizer. There is two loops with a switch. The first loop looks for tokens separated by spaces; the second loop looks for the colons in the time pa