Unable to view web-based applications

I have made a small program using Measurement Studio for VB(VB 6).It is a very small program which uses a knob control and a slider control.I have made the Web page and other files using the Package and Deployment Wizard as told in the Application Note which is available in the Meas Studio help.
I am able to access the web page and see the embedded Application from other computers in the Local Area Network which has got LabVIEW installed in them.When I try to access it from computers which does not have Labview, I am able to see the web page. but the embedded application is not visible.
my question is :
1) To see the web baswed application thru a browser is it required to have any Run Time engine or plug-in like the Labview
Run Time engine which is required to see the Labview VI when published as a web page ?otherwise what-else could be the problem?
2)Question No.2:
Does the Meas Studio for VB or CVI has got any real-time version or real-time capabilities? is it possible to do Analog I/P and Analog O/p using my Real-Time card PCI 7030/6040E using programs written in Meas studio for VB or CVI ?
3) qust. No.3:
I am not seeeing any Intensity chart in Meas Studio for VB and CVI.Is it not available in these two environments?

Hello
When developing web components, the necessary files should be downloaded automatically when you get to the web page ( kinda like a web page that uses flash or quicktime components). If you did not have any errors while packaging the components up, you might want to make sure that the your security settings on the web page allow you view activex controls. And also check this link for general issues with the PDW.
Answer 2:
You need to have LabVIEW RT to run code on a 7030 board, because only LabVIEW can target it. You can write dll's using CVI that would run on the RT platform, but you would still need LabVIEW to run the code. Measurement Studio does
not have any support for RT at this point.
Answer 3:
Check out these examples
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3E14B56A4E034080020E74861&p_node=DZ52016&p_submitted=N&p_rank=&p_answer=&p_source=Internal
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D7DD56A4E034080020E74861&p_node=DZ52139&p_submitted=N&p_rank=&p_answer=&p_source=Internal
These are examples of making an intensity plot using the 3dgraph control.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Similar Messages

Unable to view web-based videos

For the past few days, I have been unable to view web-based videos with the exception of YouTube. I am running Windows 7, IE 10, and am using Flash Player ver 11.8.800.94. Have tried using Beta ver 11.8.800.115 with no change. I have run 2 different anti-virus/anti-malware programs, and nothing was found. Have un-installed/re-installed Flash Player several times, and still receive messages telling me I need to download Flash Player. My system shows that I am running Flash Player 32-bit, but no videos besides YouTube will play. have been in contact with Microsoft for assisstance, and have followed all their suggestions, but still no luck. I am down to rebooting my laptop from scratch but thought I would see if you might be able to assisst me first.Any suggestions?

Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Web based Applications in Nokia 5220 xpress music

Hi
I recently bought this phone (Nokia 5220) but I am unable to run web based applications like opera mini flickr and cellity . The problem is although I can access internet through the phone browser I am unable to access the web through these applications can some one please tell me why this is happening ?

28-Sep-2008 01:47 AM
ixtra wrote:
Its still not connecting
Its telling
Probably a wap gateway is obstructing the correct transmission
Therefore, might be your network blocking the application to exchange and transmit datas.
Maybe Nokia's are much easy to handle (manipulate) than your previous phone.
Message Edited by nj15 on 28-Sep-2008 01:51 AM

Conversion of forms5.0 to web based application

dear folks,
i have an existing application which runs on forms 5.0. i want to
convert it to a web based application. i do not want to rewrite
the scripts.if some of you could tell me the details about how to
go about it.
null

I am not sure if there is any tool to do that.
You can delete WebSphere specific xml files from ear/jar and open it in Weblogic's builder tool. Weblogic Builder is a GUI tool. Helps you assign values for deployment parameters, Transaction attributes, JNDI names and so on. Then you can generate deployment descriptors. Subsequently you can modify the descriptors as and when you want.

Client/Server to Web-Based application Conversion

Hi! Everyone,
I have couple of questions for you guys.
Our Client had recently upgraded Forms 4.5 to 6i to move from Client/Server based application to Web based application.
They are using Forms Server 6i Patch Set 1, OAS 4.0.8.1, Windows NT Service Pack 5 and Oracle 7.3. They are facing the following error every now and then, when they run the forms,
"FRM-92100: Your connection to the server was interrupted. This may be the result of a network error or a failure on the server.You will need to re-establish your session."
Please let me know what might be causing the above error. The only problem i can think about might be Oracle 7.3. If i am right only Oracle 8 and above supports Forms 6i.
Can anyone let me know some tips and/or techniques to upgrade Forms 4.5 to 6i. If there are any important settings/steps which we might have over looked during the upgrade, please list them.
Any kind of help is greatly appreciated.
Thanks,
Jeevan Kallem
[email protected]

Most of the code is use with no changes at all.
See otn.oracle.com/formsupgrade
Regards
Grant Ronald

How to integrate web based application to windows based application

Hi,
Experts,
we developed web based application in this when we raising
invoice document after adding this we need to updated Amount
in integratee SAP B1 then that Amount we need Update The
Amount in OACT Table how we can Update in Amount Field
in OACT Particular Account Code. plz Guide me. and how to
integrate web absed application to windowbased application
plz help me.
Regds,
Samapth.

Dear sampathdevunuri kumar,
You may develop the addon based on SDK DIServer for required function.
The DI Server is an extension of the DI API and supports all its objects. It is intended for high-volume data integration, where numerous client connections must be managed simultaneously and optimized for speed. It is also suitable where Web-services architecture is preferred.
Please refer to SDK help and SDK DIServer sample for more information.
Best Regards
Jane Jing
SAP Business One Forums team

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

Authentication between Single Sign-On and Web based applications

Hi everyone,
I need to create a way in Portal 10g (10.1.2.0.2) that allow me to do the following:
Once the user is logged on Portal (against Single Sign-On - SSO) he doesn't need to retype his username/password when he access a web based application throught the portal, in my case, an ASP application (not .NET, just ASP).
I made a test creating a External Application in SSO and after publishing this portlet (external application) inside portal.
It worked, BUT I was prompted to inform username/password to log on the aplication.
So, the user end up entering his password twice.
Does anybody know a way to acomplish this task?
The documentation I'm researching is:
Oracle Application Server Single Sign-On
Administrator's Guide
10g Release 2 (10.1.2)
B14078-02
Oracle Application Server Single Sign-On
Security Guide
10g Release 2 (10.1.2)
B13999-03
Thank you very much,
Diogo Santos.

have figured out how to secure any HTML, ASP, PHP, CFM, etc. web page again Portal / OID using the PDK toolkit.
Using AJAX (Asynchronous JavaScript and XML) and one Oracle Stored Procedure just adding a simple Javascript call to any HTML, ASP, PHP, etc. web page can secure it via Oracle SSO (OID). Access to any secured web page will require that it to be linked from an authenticated Portal session or a page opened in an authenticated Portal session.
This process can be easily modified to add in group security etc. This is just my starting point.
1) Create a stored procedure
# Make sure it has access to portal.wwctx_api.is_logged_on
CREATE OR REPLACE PROCEDURE login_ajax_check (
display_error IN number default NULL) AS
BEGIN NULL;
If portal.wwctx_api.is_logged_on = false then
htp.prn('DENY');
ELSE
htp.prn('ALLOW');
END IF;
Exception when others then htp.p('DENY');
END;
2) Use this Javascript in any page you wish to secure.
<-- Begin Paste Here -->
<script>
var allowgo=2
function ajaxCallRemotePage(url)
if (window.XMLHttpRequest)
// Non-IE browsers
req = new XMLHttpRequest();
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send(null);
else if (window.ActiveXObject)
// IE
req = new ActiveXObject("Msxml2.XMLHTTP");
req.onreadystatechange = processStateChange;
req.open("GET", url, false);
req.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
req.send();
else
return; // Navigateur non compatible
// process the return of the "ajaxCallRemotePage"
function CheckPortal()
ajaxCallRemotePage('[Your page calling the procedure from above]');
function processStateChange()
if (req.readyState == 4)
if (req.status == 200)
if (req.responseText.substring(0,4) == 'ALLO')
allowgo = 0;
else
allowgo = 1;
function doPage()
if (allowgo==1)
window.location='[Your login or error page]';
CheckPortal();
doPage();
</script>
<-- End Paste Here -->
That's it!!! Super easy. It works great too.
Larry Schenavar
[email protected]

Registering the Web based application as a Partner Application

Good day
I went through the suggested documentation of registering a
web based application as a partner application of the SSO Login Server.
I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
which consists of the following programs :
papp.jsp
ssoinclude.jsp
ssoEnablerJspBean
SSOEnablerBean
SSOSignon
As per the technical documentation,I register this demo application as a
partner application.
1 - The source code of the papp.jsp checks for the existence of the user
through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
check the existence of the application cookie.
2 - If it doesn't exit , it redirect it to the SSO Login page for user
authentication.Once the user is authenticated, a SSO login cookie is created on
the client's browser and redirects back to the SSOSignOn.
3 - The SSOSignOn program creates the application cookie and redirects back to
the entry point of the demo application which is papp.jsp.
My Questions are as follows :
1 - Instead of creating a session object within my web based application to hold some
information used between the different pages, can I define them in the
application cookie? kindly advise? Is there any limitation for the length of
the application cookie? If yes, what will be the risk?
2 - The SSOSignOn program is calling a method in the SSOEnablerBean
[setPartnerAppCookie(response, request). Within this method , it is retrieving
the parameters values of the request object as :
request.getParameterValues("urlc")[0];
What is the role of this [urlc]? Is it hard coded? Can I change it?
3 - In order to ensure that I am still dealing with the same user, shall I put
the above security check procedure on each page of my weeb based application? Kindly advise?
Thanks in advance for your prompt feedback
regards

Dear Paul
I think there is a misunderstanding regarding the last correspondence.
I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
On the other hand, I am facing a problem during the surfing of the web based application.
The web based application consists mainly of two packages :
Package I : Bank.counter which contains a set of jsp pages.
JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER_DETAIL
Package II : Bank.portfolio which contains a set of jsp pages.
JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_PORTFOLIO
JSP_MAIN_FRAME_PORTFOLIO
Please note that the SSO classes are residing under the first package.
As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
<%@ include file="ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
<%@ include file="../counter/ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
Kindly advise .

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

My firefox crashed when upload file on our web based application. This happen on two PC, even during firefox safe mode the problem still exist. But the problem

Dear All,
My firefox (version 23 on win 7) crashed when upload file on our internal web based application. This happen on two PC, even in firefox safe mode the problem still exist. So, my first conclusion the problem nothing to do with extension. here the crash ID https://crash-stats.mozilla.com/report/index/81220865-36c0-4e10-a484-6d27e2131023 and https://crash-stats.mozilla.com/report/index/86d2b779-9730-4d2c-b276-a86d42131023. I wonder if this happen because jquery modul in our web based application. But when I tried on my laptop, the problem dissapear. I tried to replicate same situation on different server, I mean I put the exact same application source to other server, never meet the same problem. Thus, I suspect may be it related to antivirus that installed in our network which is kaspersky. I am googling, never meet the clue.
If you meet the same problem, please help me.
I am so sorry for my poor english.
Him Him

The crashes are a problem with the winhadnt.dll file (OCular Agent from TEC Solutions Limited) as you can see in the crash reports.
*http://www.freefixer.com/library/file/winhadnt.dll-52397/

What is Digital Signature, How to use it in web based applications?

I am new to digital signatures. Any body can help me how to create a digital signature and how to use it in web based applications. Do we need certificates to use digital signatures?

<link_farm_and_everything_else_removed_by_moderator>
Edited by: Julius Bussche on Sep 3, 2008 8:59 AM

Developing Web based applications using developer 6.0

How best i can use developer 6.0 as a web based application. I
have oracle web application server 4.0. Is it possible to
develop forms in 6.0 and use through the web application server.
null

T.Pavan Kumar (guest) wrote:
: How best i can use developer 6.0 as a web based application. I
: have oracle web application server 4.0. Is it possible to
: develop forms in 6.0 and use through the web application
server.
Yes, it's possible and it runs.
You will need:
- Application Server 4.0.7 or above (with 4.0.7 without patch,
do not install it on Win NT with SP4, it doesn't run
- Developer Server (may be it is not on your distribution CD for
Developer, but you can download or order it from OTN)
- JInitiator (the Oracle Java PlugIn, also available from otn)
for your end user's browser
Tip:
look very carefully at the documentation AND readmes. Also, if
you do this job for the first time, be prepared for some days of
work before your first form runs as a java applet...
peter
null

I am unable to use Web based Note Editor in my Ipad

I am unable to use web based note editor in my ipad whereas it is working in my Mac Book and Iphone. Can u plz help?

So are you saying that when you go to the same web page as them, your browser shows something different to what their browser shows them ? Can you literally email one URL back and forth and get different results, or is the URL different for different users ?
Do you have to log in to anything on the web server to get to that point ? Might it be that your account doesn't have the same access their account has ?
Can you try letting them use your iPad temporarily and see whether it continues to work for them ?

What technologies to use in web based application...??

Hi,
I have to develop a web-based application that will be used to display configured tests to user as well will allow user to add new tests and modify/delete already configured tests. What technologies shall i use to develop this application. And what will be fast to learn.
What is your opinion on applet-servlet approach here.
Please suggest.
Thanks,
Deepak

What you've got sounds good.
If you're not going to build EJBs then you probably don't need JBoss.
Tomcat is the servlet engine for JBoss so you're getting the same thing but lighter by just using it.
The important thing is to make sure you have a nice separation of concerns. If you separate all of the database access by creating data access objects (DAO) objects that return plain old Java objects (POJO) then you can, if you choose, easily swap in Hibernate or another ORM Tool.

Unable to view web-based applications

Similar Messages

Maybe you are looking for