Unable to visual basic 2008 to win7 and win8

Hi sir,
When trying to install, clicking to the setup file, I get the first screen windows and then clicking OK to process instalation I can not get further !
Anxious to hear from you

Hell jcpakuvey,
We are lack of info to help you track this issue. So please refer to this article:
https://support.microsoft.com/en-us/kb/2899270?wa=wsignin1.0
And collect logs for us:
Download the
Microsoft Visual Studio and .NET Framework Log Collection tool
(http://www.microsoft.com/en-us/download/details.aspx?id=12493)
(collect.exe).
Run the collect.exe tool from the directory where you saved the tool.
The utility creates a compressed cabinet file of all the VS and .NET logs to %TEMP%\vslogs.cab.
Post the vslogs.cab file with some descriptions of your issue to the forum.
And my concern is that Visual Studio Express 2008 is already out of support and I cannot provide a way for you to verify your source. Why you need Express 2008 and do you mind to update to use the latest Visual Studio 2013 Express version? In that way, you
can verify you source by refer to here
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs and you can also benifit from many new features.
By the way, VS Express 2008 ISO download page
http://blogs.msdn.com/b/wriju/archive/2007/11/21/visual-studio-2008-express-iso-image-download.aspx
If your package is a webinstaller, then you can try the ISO image above.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Daqmx installation to be used in visual basic 2008

I plan to use PCI-6509 Digital IO in visual basic 2008. I installed NIDAQmx9.5.1.f2.
After installation, NIMax can detect the hardware(PCI-6509) successfully. NIMax was installed when DAQMX was installing.
But In VB2008>project>add reference>.NET, I can not see NationalInstruments.daqmx.
So I can't add it to my vb2008 program's reference.My program use PCI-6509 to control relay.
my PC has window 7 64bit operating system and the following .NET has been installed already.
Microsoft.NET compact Framework 2.0 SP2
Microsoft.NET compact Framework 3.5
Please let me know if you have any idea?
Thank you in advance.

Finally I solved the problem after reading the following document.
http://digital.ni.com/public.nsf/allkb/0EA34D565632DFE186256E7B00762DCC
The summary is
1. I need custom installation.
2. select NET Framework 3.5 language support. => install this feature to a local drive(do not select subfeatures)
3. And do not select Measurement Studio Integration under NET Framewrork 3.5 language support.
Now I can add DAQmx reference in my program without any problem.
Thank you for everybody who replyed.

Microsoft Word Object Library does not find in add reference com visual basic 2008

I didn't find the Microsoft Word Object Library On
the COM tab, in visual basic 2008
how i can add it.
my purpose that i want to add word in my project and can view and edit in it.

I didn't find the Microsoft Word Object Library On
the COM tab, in visual basic 2008
how i can add it.
my purpose that i want to add word in my project and can view and edit in it.
Maybe dumb question from me, but is Microsoft Word installed on the machine?
AFAIK, you can (optionally) install the "Primary Interop Assemblies" when installing Word. (see also: How to: Install Office Primary Interop Assemblies)
Armin

Is posible execute script PLSQL in Visual Basic 2008?

Hi, i'm a beginner in PL/SQL. And i have a question:
How is the procedure for execute script PL/SQL on clic a button in a visual basic 2008 form. Coud you help me please.
I'm sorry for my english but i only speak spanish.
Thanks
Edited by: Edgar Molina on 7/11/2009 08:34 PM

Something like this
   Dim sqlStr As String
   sqlStr = "DECLARE " & vbLf & _
               "your vars declared here " & vbLf & _
               "BEGIN" & vbLf & _
               "your pl/sql code here " & vbLf & _
               "EXCEPTION" & vbLf & _
               "your excepltion handling here " & vbLf & _
               "END;"
   Dim comm As New OracleCommand(sqlStr, MyOracleConnection)
   comm.CommandType = CommandType.Text
   MyOracleConnection.Open()
   comm.ExecuteNonQuery()Max

Unable to sync my replacement 7th generation Ipod Nano. Previous nano had no issue. Both Win7 and Win8 Pc's fail sync. I am an admin on both machines.

I don't know why my new 7th Generation Ipod fails sync diags on both Win7 and Win8 computers. I am an admin on both machines. The computer sees the device, but ITunes does not, but yet I can eject the ipod.

Hello Dee Nano.
It sounds like your iPod nano is recognized by your PCs, but it isn’t recognized by iTunes. Try the suggestions in the article linked below, they will resolve most issues like this.
iPod: Appears in Windows but not in iTunes
Cheers!
-Jason

Acrobat XI unstable on Win7 and Win8

Anyone else having trouble with creating/appending a webpage from browser to a PDF.
Typical problems:
firefox crashes during creation
Creation popup window keeps running with no progress
Error popups "DDE unable to communicate with Acrobat"
In ability to capture Web pages that have JavaScript
( The most frequent language on the web; Acrobat has JS built in )
When this happens, I stop having the browser append the page,
and instead request the page be appended from Acrobat.
Serious Flaw: If the page I'm viewing was arrived at by Single Sign On
to the site, Acrobat will only collect the signon redirection page.
That is why appending the page from a logged in browser is important.
Most annoying: Acrobat does not remember the name of the last PDF used.
It always truncates the name into something unusable.
I have to ALWAYS find the last PDF I was writing to for a new "Append" request
Acrobat becomes non-responsive when DDE connections fail.
It means I cannot launch Acrobat at all ... even for different pdf files.
Solution: Task Mugger and kill the running Acrobat processes.
I have several Acrobat dmp files ... I opt-in to "make Acrobat better" ... is Adobe
getting these crash failures? Something more I have to do at my end?
As far as I can tell by dates, the crashes had nothing to do with Task Manager kills.
I see the same problems in both Win7 and Win8.
Acrobat X worked much better ... but the plugin was only available for Internet Explorer,
so I upgraded to XI.
Super annoying: Adobe does not appear to ever have tested appending from a
browser to a PDF that was just created. It always presents a corrupted filename
for selection.
My Solution:
Create an entirely new directory
Place the pdf I want to create there as the only file
When Acrobat "forgets" the filename, it does still remember the directory
and I don't have to search for the PDF I want to append to.
It still is an additional keystroke to select the file ... which really slows me down.
Please fix these things. Or do I have to wait for XII version to get any fixes?
I am using Acrobat XI Pro Version 11.0.06

Perfect example of failures. Viewing this page from firefox, "convert to PDF"
http://forums.adobe.com/message/5140738#5140738
It hangs and two windows are open:
Apparently can't copy/paste images. Here they are:
And the firefox crash when I attempted to Append to a pdf:

Unable to load gpib-32.dll when running the visual basic 2008 program

I installed NI-488.2 into my PC, window 7 64 bit OS.
In the program >> project> add reference>.NET, I successfully add the NI.4882 into my visual basic program.
By the way, this program worked well in another window 7 32 bit PC.
But when I run the program at ildev(BDINDEX,.........), error comes up as "unable load DLL gpib-32.dll".
So when I looked at c:\windows\system32, I can not fine gpib-32.dll.
Doesn't NI-488.2 driver install gpib-32.dll?
How can I install gpib-32.dll?

SeongCho wrote:
Nyc, thank you for your reply.
By the way, I think I did all the link explained.
So I have no problem in adding NI488.2 to my program's reference using "add reference".
The problem is GPIB statement like ildev() looks for "gpib-32.dll".
But there was no gpib-32.dll installed in "c:\windows\system32" so error comes up with "unable to load gpib-32.dll".
I did the same procedure in my another PC(window 7 32 bit OS,my current PC is window 7 64 bit OS), and in that PC I can see the gpib-32.dll in that directory and program run without problem.
I do not know how gpib-32.dll was installed in my previous PC.
Thanks
Seong
Have you looked at the example programs for .NET that install with NI-488.2?
You need to start thinking in terms of .NET

Unable to install DM6 - asks for Microsoft Visual Basic+++2008 Redistributable

Laptop Dell 1764 Win7Pro - DM5.
Just got a 9900 Bold yesterday to replace my Tour 9630.
I attempted to install DM6 and received the same error message I received when I had tried to install DM6 a few months ago.   I click file 610_b034_multilanguage.exe and installation begins. Half way through installation a window appears saying that Microsoft Visual C++2008 Redistributable must be installed - Microsoft Visual C++2008 Redistributable - x64 9.0.30729 is listed in the Control Panel>Programs and Features as being installed.
I noticed that Microsoft Visual C++2005 Redistributable (x-64 Version 8.0.56336 is also installed together with SQL Server 2005.
I installed DM6 on my XP laptop without any problems.
I need to install DM6 so that I can back up my 9900 and synchronize.
Your recommendations would greatly be appreciated.
Pierre
<removed>
EDIT: Personal Information such as e-mail is prohibited for your security. Please review User Guidelines under section "Be careful."
Solved!
Go to Solution.

It's a pity you didn't post the actual error message you receive...that always helps in searching for solutions...but, perhaps this one helps:
KB03744 How to silently install BlackBerry Desktop Software
It's not exact, but perhaps it has a better hint.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

PCI-GPIB Card with Visual Basic gives blue screen and re-boots PC

The application makes the "ibsic" call then "ibln" to find devices on the bus. Running the VB program the first time is fine, but if you end the program and re-run a second time, you get a blue screen and the PC reboots when the program reaches the lines that make the first call to the NI-488 functions. If you close out of VB and then restart VB, everything is OK again.
What is wrong?

Hi,
Here's an article that describes the most common blue screen when using VB:
Why Does My Windows 2000 or XP System Crash When I Use Visual Basic to Program GPIB?
Hope this helps
DiegoF

SetupIP fails on Win7 and Win8

Updating groupwise client via SetupIP works perfectly on WindowsXP workstations. Launching the SetupIP.exe from Win7 or Win8 machines, we get this alert:
SetupIP is unable to copy Setup-Files. Contact Systemadministrator.
Apache configuration seems to be correct and wireshark gives no hint. The error must depend on the local workstation.
Any help is appreciated. Thanks in advance
--Ferdi

fgiese,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Can't get brushes and swatches to sync, only settings/workspaces. (Win7 and Win8.1, latest photoshop)

I have Photoshop CC 2014 installed and updated on a Win7 machine and a Win8.1 machine. When I go to edit>preferences>sync settings, everything is checked, but it seems that only my workspace settings get uploaded. It never seems to transfer my swatches or brushes. They are stored in the default location and show up in the brush and swatch menus.

Do they play in iTunes?

Print servers and printers problems on Win7 and Win8

Hello,
We have some computers, working on Windows operating system in the office: a few forking on the good old XP sp3, one running on the Win7 x64 home edition and one running on Win8 professional (the last one installed for new OS testing purposes)
During last two months I have tested a few print servers attempting to find one which can work with Windows 7: Trendnet, Synology, and D-link print servers. However, unsuccessfully. Here is the result:
   1) Any print servers is working perfectly with WinXP sp3 (full printing and MFP function support, easy configuration and access, successfully scanning and printing operations in 100% cases)
   2) No one print server is working correctly with Win7 home x64 (mostly successful installation but complicated and unclear configuration; printed pages often is missing, no scan support for MFP.
   3) There is a little bit better situation with Win8: 100% printing support on the same equipment but no scan support for MFP
Could you please help me with followings:
1) Could you please help me configure print servers and printers on Win7 x64, including printing and scanning support?
2) Could you please help me configure scanning support for Win8?
Please find full list of affected hardware bellow:
1) Machines, running on Win XP: Panasonic CF-29, CF-74, HP Compaq dc7600, some Acer laptops;
2) Machine, running on Win7 x64 home: Asus UX21, (OS probably was preinstalled on the factory)
3) Machine, running on Win8 pro: Lenovo X200 tablet
4) Printer HP LJ1020 with drivers for XP and Win7, x86 and x64
5) MFP printer Canon MP600 with drivers for XP and Win7, x86 and x64
6) Print server: D-link DPR-2000
7) Router: Cisco RV042G
All the machines has correct drivers installed, all the printers supports all the services if connected to computer directly. I have made all possible steps solving mentioned problems, including automated problem solving wizards on Win7.
Thanks in advance for your support

Hi,
Regarding the printer configure issue, I would like to share the following article:
Managing Printers and Print Servers
http://technet.microsoft.com/en-us/library/cc754769.aspx
According to the scanning support for Win8, it is better to post this issue in Windows 8 forum for more help.
Regards,
Vincent Wang
TechNet Community Support

Flash Player crash in IE on Win7 and Win8.1 on allow camera/microphone access

Hello,
My web app crashes for 2 my clients in IE, when they start broadcast and press "Allow" button in security dialog. Other browsers works fine for them. Has anyone experienced similar problem?
I don't have enough info to fill ticket yet.
Stan

Thanks for your prompt and helpful reply.....
When dealing with such a large problem with frequent FF lockups the temptation is to lump all information in an attempt to solve. LOL
Chasing multiple threads to help solve the problem may be helpful to the developers but it takes far too much time following and posting in each thread. As you can see it's taken a couple of days to get back to this post.
First thing we did is dump cache and cookies both through the interface and then manually in the profile. We changed the version of Flash installed manually and even changed the version of FF. There are many "flash" enabled pages we encountered which caused the lockup.....so MSN is not specifically the issue.
But when Flash is removed or disabled the browser no longer locks up.....suffice to say we get an error when visiting a website with flash content on it.
That is why I chose to post here as the problem is directly attributable to Flash in FF on all of our machines.
Paul

Cannot install Acrobat from CS6 in Win7 and win8 Chinese platform

The error code are as follows:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF029, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 7 warning(s)
WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0
WARNING: DW065: Display requirements not met for {A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E} Adobe Dreamweaver CS6 12.0.0.0
WARNING: DW065: Display requirements not met for {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at F:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at F:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
please help

See the following help document:
Exit Code: 6, Exit Code: 7 Installation Errors -
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

X1Carbon Dual Boot Win7 and Win8

I've got both sets of OEM Windows disks for the X1 Carbon (which I love), and I'd like to get both operating systems loaded with dual boot functionality. Can't seem to figure out how to do it since these disks just load automatically and wipe out the drive. Any ideas?

BHruska wrote:
I've got both sets of OEM Windows disks for the X1 Carbon (which I love), and I'd like to get both operating systems loaded with dual boot functionality. Can't seem to figure out how to do it since these disks just load automatically and wipe out the drive. Any ideas?
Load Windows 7 first, then load Windows 8. You need separate partitions for each or you need to use dual boot from VHD.

Unable to visual basic 2008 to win7 and win8

Similar Messages

Maybe you are looking for