Unable to work, CC does not respond

Unable to work, CC does not respond
Message to launch photoshop or indesign:
Error
There Was an error with this action. Try again later.
e76a857c-681f-4146-b539-161a9832373c
I work on Mac 10.9
thank you

Looks like toad is right. A quick google search on "does not have any corresponding BIOS drive" shows a load of entries going back to 2006. The ones I looked at are same error as you report, and the fix sounds exactly what toad said:
The first Google result was -
http://www.cyberciti.biz/faq/error-devhdx-does-not-have-any-corresponding-bios-drive-and-solution/
Which basically says to do this -
# grub-install --recheck /dev/sda
You did mention recheck in your post. I then read the post again:
> boot arch iso
> mount /dev/sda2 /mnt
> cd /mnt
> mount -t proc proc proc/
> mount -t sysfs sys sys/
> mount -o bind /dev dev/
> chroot /mnt
> grub-install /dev/sda
and you are mounting /dev/sda2 to /mnt but trying to install grub to /dev/sda.
I can't say for sure that's wrong but surely sda2 wont mount to /dev/sda? I may be miles off here admittedly. I can't remember offhand how mount works.
Last edited by RichAustin (2011-09-05 13:38:31)

Similar Messages

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

HELP NEEDED. Plugin container stopped working / Script does not respond

Hi!
I am aware that there are numerous articles about this problem, but unfortunately none of them solves my problem.
Very frequently, at least once a day (usually from 3 to even 7 times a day) my Mozilla Firefox freezes and I am forced to restart it. It typically occurs when I try to open a page with some interactive content in it (youtube, some fancy flash pages, even gmail document preview). When I try to close it, Windows pops up a message saying that "Firefox stopped working" and terminates the application itself, and then another window pops up, saying "Plugin Container for Firefox stopped working". It's usually either that, but sometimes Mozilla also shuts itself without any warning and the same message appears.
As for "script does not respond", it does happen as well, although way more seldom. Usually it happens on the pages with lots of images. The whole browser then freezes for couple of seconds, then it pops up a window saying that the script does not respond and asks whether I want to force it to continue or not. It doesn't make any difference which option I choose because usually the browser crashes anyway.
I am using version 34 and I made sure all my plugins and addons are up to date. I also disabled hardware acceleration and tried to reinstall whole flash thing. I wonder whether it's the fault of one of my addons, but I admit I am not too eager to try and disable them all and then test it one by one because it would take up way too much time.
Apart from that, none of the previous solutions seem to help, and the problem really gets on my nerves because numerous times I lost a huge block of text I was writing. Now I learned to copy everything I write couple of times :/
Maybe the crash reports will help. I'll link them from the newest to the oldest (for some weird reason they are 3 crash reports from today, yesterday and 3 days ago - weird, because the browser has shut itself today at least twice, not to mention previous days):
https://crash-stats.mozilla.com/report/index/ba7f5087-3d7d-4b2c-b9b1-04e6d2150105
https://crash-stats.mozilla.com/report/index/72eaf792-5f06-445b-806c-cd7922150104
https://crash-stats.mozilla.com/report/index/c3f81ff8-df10-45a6-8400-1c5912150103
I'll be glad for any help because, honestly, I can't stand it anymore. No reinstalling of Firefox or restoring settings to default have helped me yet.

Hmm, that's pretty bad. Often if Windows is stepping in with the crash report, then the issue is with a driver incompatibility, most commonly a display driver.
Here are a couple things to try:
(1) Disable Firefox from using hardware acceleration
This is the traditional workaround. You can use:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That takes effect the next time you exit and start Firefox up again, which the way you describe it, might be quite soon.
(2) Disable the Flash player plugin from using hardware acceleration
This is a separate setting. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature
Protected mode has security benefits, but is not compatible with all systems for some reason. It can stall scripts on some systems, for example. You can disable the feature by creating or editing a settings file. The following pages/posts provide different approaches:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternate version of Carm's batch file with a few changes by me: [https://onedrive.live.com/?cid=f7d304d92388737d&id=F7D304D92388737D!336&ithint=file,.bat&authkey=!AP2FXW2Y_3BXZyo])
Any improvement?

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

My suddenly no longer works and dosn't show any sign and when i try to make restore for it iTunes shows me error 4005 and my iPhone does not respond to iTunes

my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes

OK, and when you searched for information on iPhone error 4005 what did you find?

My itouch is not working when i touch the screen nothing happens it does not respond

my ipod does not respond when i try to slide to unlock it does nothing like if the thouch part does not work y is this happening?????

Try resetting it:
http://support.apple.com/kb/HT1430
Hope that helps.

I have been working and the word program does not respond how do i save changes before forcing

I have been working a word document and now the program does not respond, can I save the changes before forcing to close the application?

no

My IPAD 2 is freezing on the principal internet explorer page. It presents the google home page with a grey filter over it and does not respond to any touch or key. All other internet dependent functions seem to be working (i.e. mail, various APPs etc.)

My IPAD 2 is freezing on the principal internet access page. It comes up through a light grey filter and does not respond to any touch or keys. All other internet dependent functions seem to be working fine (mail, various APPs). How do I "unfreeze"?
thanks
geoff1949

Geoff-
Go to Settings-Safari and Clear History and Clear Cookies and Data.
Another thing you can try is to double-click the Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and find the Safari icon. Press on it for a couple of seconds until it starts to wiggle. A red minus sign will appear on each icon. Press on Safari's minus sign to remove it. This may clear its memory of the bad Google page.
If this does not help, try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred
Message was edited by: Fred*M.

Is it possible to lock the camera so the screen does not respond to touch? Everything else works but camera screen seems frozen.

My camera screen acts like it is locked. Everything else on the phone is fine and I only have fourteen photo's on the phone, one day it worked and the next day the screen does not respond. Have I done something?

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Hope that helps,
Griff W.

Click on the the emal on my iPad2 e opens blank and it does not respond to touch, it worked perfectly until this morning. All the settings are the same ed and correct

when I click on the email on my iPad2 the page opens blank and it does not respond to touch. It worked perfectly until this morning, I did not change the settings everything else is working good. Any idea what to do to sort this out will be very much apriciated.
Please help!

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

I have 2 people in my contacts that I'm unable to text. The SEND button does not respond

I Have 2 contacts that I'm unable to text to. The SEND button does not respond. Other contacts will send message.

Hi Gaylene1949,
So the issue is isolated to two contacts only.
There are a couple sections in this article for troubleshooting contact specific issues.
iOS: Troubleshooting Messages
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
and
If you still can't send or receive SMS, follow these steps
Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Thank you for using Apple Support Communities.
Nubz

I have an apple trackpad that shows that it is connected to Bluetooth but it does not respond. I have tried restarting the computer and turning the trackpad off and on but it will not work. Anyone have any ideas on what is going on here?

I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?

There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement.

HT5076 The record button on my garageband does not respond/work. I can play, rewind, etc. The touch screen is fine. Please help.

I recently backuped up all my apps and music/etc to the icloud. I had my ipad 4 touch screen repaired. I got thee ipad back in perfect working condition. however, when I launched garageband....I tried to record but the RECORD BUTTON does not respond. This is not a touch screen issue...I can press play, rewind, I can select instruments, I can play the virtual instruments etc. I tried rebooting my ipad and I also deleted and re-downloaded garageband. The issue is the same.
Please advise.

Did it work before?
Does iHome say it is compatible with a 4G iPod with iOS 6.1.3? Sometimes an iOS update will break compatibility.
Make sure the iPod is fully seated in the dock. The case of the 4G is different than previous iPods and thus if the dockl\ was not designed with the 4G in mind it may not fully seat.
- Inspect the dock connector on the iPod and dock for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset the dock
- Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Or it may just be not compatible

Unable to work, CC does not respond

Similar Messages

Maybe you are looking for