Unable Update profile due request data for "state" field

Anyone else having a problem updating their profile? Once I log-in the site send me page to update my profile. Once I try to click update, it comes back with an error message requesting the "state" field be complete. But there is no "state" field provided or it is not visible.
Who ever create the profile page needs to check their work.

Thank you all for responding.
@ Sushant - We definitly have data in that PSA table linked to the data source (8ZECPCO22 , where ZECPCO22 is the direct update DSO) and this data is what we want to delete through process chains. As mentioned earlier we are able to manually delete these PSA requests via manage of the data source.
Few more detail information below:
ZECPCO22 is the direct update DSO and as per the data flow the data is further loaded from this DSO (data source -8ZECPCO22) into a master data infoobject or other targets via a infopackage and with processing type "PSA and then into Data target in series".
So looking at the infopackage one can definitly confirm that the PSA table is used and since the DSO is a direct update we cant have change log table.
However we are unable to delete these PSA requests through process chains using a "Delete PSA request" nor "Delete Change log Request" process types.
Any suggestion is appreciated.
Warm Regards
Vikram S Reddy

Similar Messages

Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
How can I uninstall the 9.5.2, or get it to work again?

Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
-Dan-
[email protected]
Date: Thu, 16 Aug 2012 23:06:52 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    created by vamalik in Acrobat Installation & Update Issues - View the full discussion
Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Trying to load music to ipod, getting "windows - write delayed fail unable to save all the data for th E: etc

trying to load music from itunes to my ipod classic message rec'd WINDOWS - WRITE DELAYED FAILED UNABLE TO SAVE ALL THE DATA FOR THE E: THE DATA WAS LOST
is this my ipod or an itunes problem?

I spoke to ipod tech support and was told "We do not support itunes. It is only a web based support" Which apparently does not exist.

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Default Data for Document Fields D_CUII_TYP

Hi experts,
I am trying to define default data for document fields in Export Switzerland.
Source field is G_IMPCN, target field is D_CUII_TYP.
I create the following master data, i.e.
G_IMPCN = 39095000
D_CUII_TYP = FREI
meaning if G_IMPCN is 39095000 then Legal Document Type FREI is being created automatically.
Then I run the default data function on document level but nothing happens.
The log shows G_IMPCN with value 39095000 but D_CUII_TYP = FREI is missing.
Do you have any idea what else I should do to resolve this issue ?
Many thanks for help which is much appreciated.
Best regards,
Corinne

Hi Corine,
Be careful with the logs, they are quite confusing as sometimes it displays the value it is looking for and sometimes the value it has foud. And sometimes the green and red lights are wrong or put in a logic that is confusing.
Most likely it does not find the value because it is looking in the Import numbering in the import scheeme. Did you try with STAWN ? At any rate, if I may suggest, you need to setup the system with having the commodity code in the Declaration, because if you do not have the Scheme CHEXP defined in the Scheme for commodity code you are going to face trouble when trying to retransfer the Tarification to the feeder System.
Keep me posted.
Regards,
Marc

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to enter "QA OK date" for any Support Notification

Hi ,
We are not able to enter "QA OK date" for any Support Notification in solution manager.
Recently we have migrated the instance from Windows to HPUX. After the migration this problem occurring.
Any idea?
Regards
Santanu

Hello,
If the code you need to enter are numbers, you need to press the "function" key first (in the bottom left corner of the keyboard).
Hope this helps.
Regards.
C3-00 V 08.63 25-03-11 RM-614 Variant: 00.00

Source of data for Z fields

Dear Gurus,
What is the source of data for Z custom fields ?
Do we need to create any tables for these fields in the source system ?
Do we call it as enhancement when we add a Z field or populate an existing field (Unused) in the standard data source or user defined (Generic) ?
Can we add Z field to any standard and user defined data sources ?
Points will be taken care.
Regards
Mohan

Hi,
What is the source of data for Z custom fields ?
---> Any standard field or Custom field from the source system.
Do we need to create any tables for these fields in the source system ?
---> Not required.
Do we call it as enhancement when we add a Z field or populate an existing field
(Unused) in the standard data source or user defined (Generic) ?
---> Whenever you add a standard SAP field or Z field that is not in the Delivered version of the Datasopurce, then we call it as enhancement.
Can we add Z field to any standard and user defined data sources ?
---> Yes, you can.
Regards,
Balaji V

How to extract data for these fields from R/3 ?

Hi frnds,
My requirement is to extract the following fields which
are related to MM: Condition type, condition
value, Bill of lading, Qty in external delivery note,
Different invoicing party, Invoicing document from R/3 to
BI. But i found that they are not in any purchasing
datasources or inventory datasources ( Except different
invoicing party but the values are not picking up through
standard extractors ).
Anyone please tell me are there any standard datasources for extracting these fields ?
If not, if i want to enhance datasources for these fields
which datasource do i need to enhance i.e
2lis_02_itm,2lis_02_scl,2lis_02_s012 or 2lis_03_bf,
2lis_03_um ?
Full points will be assigned.
Regards,
Bhadri M.

Hi.......
I think you have filled the set up table..........and you have replicate the datasource also.......and after replicating you have activated in the BI side........
Then it should extract the data............
Are you in BI 7.0...........
You try one thing...............
Replicate the datasource again............and then activate the transfer rules using program : RS_TRANSTRU_ACTIVATE_ALL...........
Also check the selection tab of your Infopackage........may be you are giving some selection.........also check if it is coming till PSA..........if it is coming till PSA.....then check your transformation and DTP.......
It may help you...........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 21, 2008 11:18 AM

Issue in Update routine due to Data Package

We have this peculiar situation.
The scenario is ..
We have to load data from ODS1 to ODS2.
The data package size is 9980 while transferring data from ODS1 to ODS2.
In the update rule we have some calculations and we rank the records based on these calculations.
The ODS key for both ODS1 and ODS2 is same ie Delivery Number , Delivery Item & Source System.
For example a Delivery Number has 12 Delivery Items.
These Delivery Items are in different Data Packages namely Data Package 1 and Data Package 4.
So instead of having the ranks as 1 to 10 its calculating it as 1 to 5 and second item as 1 to 5.
But what we require is Rank as 1 to 10.
This is due to the fact that the items are in different Data packages.
In this case the ABAP routine is working fine but the Data Package is the problem.
Can anybody any alternative solution to this issue.?
Thanks in advance for assistance.............

CODE FOR INTER DATA PACKAGE TREATMENT
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
DATA: v_packet_nbr TYPE i VALUE 1.
DATA:
g_requnr TYPE rsrequnr.
DATA:
l_is        TYPE string VALUE 'G_S_IS-RECNO',
l_requnr    TYPE string VALUE 'G_S_MINFO-REQUNR'.
FIELD-SYMBOLS: <g_f1> TYPE ANY,
               <g_requnr> TYPE ANY.
TYPES:
BEGIN OF global_data_package.
        INCLUDE STRUCTURE /bic/cs8ydbim001.
TYPES: recno   LIKE sy-tabix,
END OF global_data_package.
DATA lt_data_package_collect TYPE STANDARD TABLE OF global_data_package.
DATA ls_datapack TYPE global_data_package.
datapackage enhancement Declaration
TYPES: BEGIN OF datapak.
        INCLUDE STRUCTURE /bic/cs8ydbim001.
TYPES: END OF datapak.
DATA: datapak1 TYPE STANDARD TABLE OF datapak,
      wa_datapak1 LIKE LINE OF datapak1.
Declaration for Business Rules implementation
TYPES : BEGIN OF ty_ydbsdppx.
        INCLUDE STRUCTURE /bic/aydbsdppx00.
TYPES: END OF ty_ydbsdppx.
DATA : it_ydbsdppx TYPE STANDARD TABLE OF ty_ydbsdppx WITH HEADER LINE,
       wa_ydbsdppx TYPE ty_ydbsdppx,
       temp TYPE /bic/aydbim00100-price,
       lv_tabix TYPE sy-tabix.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8YDBIM001.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
TABLES: rsmonfact.
TYPES:
    BEGIN OF ls_rsmonfact,
      dp_nr TYPE rsmonfact-dp_nr,
    END OF ls_rsmonfact.
DATA: k TYPE i,
        v_lines_1 TYPE i,
        v_lines_2 TYPE i,
        v_packet_max TYPE i.
declaration of internal tables
DATA: it_rsmonfact TYPE STANDARD TABLE OF ls_rsmonfact.
INTER-PACKAGE COLLECTION TREATMENT *******************
ASSIGN (l_requnr) TO <g_requnr>.
SELECT dp_nr FROM rsmonfact
    INTO TABLE it_rsmonfact
    WHERE rnr = <g_requnr>.
DESCRIBE TABLE it_rsmonfact LINES v_packet_max.
IF v_packet_nbr < v_packet_max.
APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
    CLEAR: DATA_PACKAGE.
    REFRESH DATA_PACKAGE.
    v_packet_nbr = v_packet_nbr + 1.
    CLEAR: MONITOR[], MONITOR.
    MONITOR-msgid = '00'.
    MONITOR-msgty = 'I'.
    MONITOR-msgno = '398'.
    MONITOR-msgv1 = 'All data_packages have been gathered in one. '.
    MONITOR-msgv2 = 'The last DATA_PACKAGE contains all records.'.
    APPEND MONITOR.
ELSE.
last data_package => perform Business Rules.
    IF v_packet_max > 1.
      APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
      CLEAR: DATA_PACKAGE[], DATA_PACKAGE.
      k = 1.
We put back all package collected into data_package, handling recno.
      LOOP AT lt_data_package_collect INTO ls_datapack.
        ls_datapack-recno = k.
        APPEND ls_datapack TO DATA_PACKAGE.
        k = k + 1.
      ENDLOOP.
      CLEAR : lt_data_package_collect.
      REFRESH : lt_data_package_collect.
    ENDIF.
sorting global data package and only keep the first occurence of the
*record
SORT DATA_PACKAGE BY material plant calmonth.
DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE
        COMPARING material plant calyear.
SELECT * FROM /bic/aydbsdppx00
      INTO TABLE it_ydbsdppx
      FOR ALL ENTRIES IN DATA_PACKAGE
        WHERE material = DATA_PACKAGE-material
          AND plant    = DATA_PACKAGE-plant
          AND calyear = DATA_PACKAGE-calyear.
Enhance Data_package with Target additionnal fields.
LOOP AT DATA_PACKAGE.
    CLEAR : wa_datapak1, wa_ydbsdppx.
    MOVE-CORRESPONDING DATA_PACKAGE TO wa_datapak1.
    READ TABLE it_ydbsdppx INTO wa_ydbsdppx
      WITH KEY material = DATA_PACKAGE-material
                  plant = DATA_PACKAGE-plant
                calyear = DATA_PACKAGE-calyear.
    IF sy-subrc NE 0.       "new product price
      APPEND wa_datapak1 TO datapak1.
    ELSE.                   " a product price already exists
      IF wa_ydbsdppx-calmonth GE DATA_PACKAGE-calmonth.
keep the eldest one (for each year), or overwrite price if same month
        APPEND wa_datapak1 TO datapak1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Edited by: mansi dandavate on Jun 17, 2010 12:32 PM

Unable to Bind back request.status for leave request. Please help me anyone

Dear all workflow expert,
I am in trying to customize the the standard leave request WF 12300111 to a 2 level approval and therefore i copy this wf out to customize it. I created one of the step to change the Req.status container back to the status "SENT" so that the second approval can approve it.
What i do was i bind the Req.status to a container i created in a task (cus_req_sta) and the task is tie to my customize BOR object. Then i bind this cus_req_sta to my method parameter in the BOR object and i have the follwing code in my bor method.
BEGIN_METHOD ZLEVREQ CHANGING CONTAINER.
DATA:
LEAVESTA TYPE PTREQ_HEADER-STATUS.
V_LEAVESTA TYPE PTREQ_HEADER-STATUS.
SWC_GET_ELEMENT CONTAINER 'cus_req_sta' V_LEAVESTA
V_LEAVESTA = 'SENT'.
SWC_SET_ELEMENT CONTAINER 'cus_req_sta' V_LEAVESTA
END_METHOD.
After i change the value in the method, i bind it back from the method to my task and then from task to the workflow. Everything is fine untill the step to pass the value (sent) from task to workflow. It seems that it does not allow me to pass back the value to Req.status container in the workflow. The Req.status does not updated at all.
The req.status parameter setting is set to import and export when i browse it in the main screen (before entering to the workflow builder). However when i am doing the binding for task back to the workflow (after i drag and drop the req.status and double click on it), it shows the check box for import and export parameter settings is not check.
Anyone have idea? Please help me.....Points will be rewards.....Thanks
Regards,
Bryan

I think you cannot change REQ.STATUS. It seems that it is an attribute and cannot be changed. An attribute is the property of the business Object instance which depends on the key field and the coding made for the attribute.
Thanks
Arghadip

Update Business Partner Master Data for Incident Management

Hi fellow SAP-ians,
I have two questions that I need to ask in relation to Incident Management SOLMAN 7.1:
1) Can Business Partner (BP) master data be mass updated via a catt script? (recording of transaction BP)
2) What BP roles can I use if i need to capture profit center, cost center and department info for each BP and to be able to display those info from Incident Management (CRM Web UI)?
Thanks in advance. Your swift response is highly appreciated.
B.Regards,
Khairul

Hi Vikram,
I appreciate your quick response. I went over the document that you've mentioned. However, nothing in there seemed to help.
Just FYI, i need to create/change approx. 25,000 Business Partners in SOLMAN 7.1 by 1)creating system users in SOLMAN and 2) execute report AI_SDK_USER_BP_GEN to generate/update BP IDs accordingly.
My question was, lets say if i needed to enter profit center, cost center and division info into each BP. In what BP role and fields, besides the standard BUP001 (Contact Person) & BUP003 (Employee), that I can use to enter those type of information?
For example, profit center - 88KUL186; cost center - 88KUL186; division - KLIA.
Thanks in advance.

Updation of Goods Receipt Date for legacy data

Dear Experts,
We went GOLIVE of SAP 6.0 version on 31.01.2008. At that time we have uploaded Inventory of Stores & Spares material wise with the GR Date as 31.01.08 as we could not get the actual date of receipt of thos materials.
Now we could able to find out the actual date of Goods Receipt of some of items and want to update it so that SAP standard report for Age Wise Analysis can be correctly generated from SAP.
Can any body advise, is it possible, if yes thru LSMW and which T-code and which field.
Regards,
Alok

Hi
This is not possible. You need to keep the previous data outside SAP. You can put stock in current period or previous period. Not in all the months of last year.
Regards
Antony

BDS stuck at updating blackberry address book data for hours while syncing with outlook

i use torch 9800, BDS 7.1 (i guess it's latest, got update notification when open it before sync) and outlook 2010.

Any error message at all?
What is a long time?
What version of the Desktop Software you using?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable Update profile due request data for "state" field

Similar Messages

Maybe you are looking for