Unablr to connect when using the Linksys router

I'm using the WRT54Gx2, version 2 router and have configured it per the directions and with a computer directly connected and logged into the router it connects to SBCglobal just fine. When I try to connect to the internet with the computer (not a wireless connection) it will not connect. I'm using a new computer running vista - if that makes a difference. I also tried connecting using another computer running xp and it will not connect.
Any suggestions?

If it's a speedstream or westell modem, you'll need to change the router's address. Do you need to click an SBC icon or enter a username/password to get online on the modem or is it automatic?
The box said windows xp or better... So I installed Linux!

Similar Messages

WOW is very slow when using the linksys router

If I connect directly into my cable modem I and run and play WOW with no problem, if I connect back the wireless router the proformance is very slow and can't see the characters sometimes. Is there a setting to turn off or lower the filters?
I have the 54GS

You may need to forward ports in order to make it work properly. This http://portforward.com/cportsnotes/battlenet/wow.htm would be a help.

LabView 6.1 crashes now and then when I try to get rid of an accidential starting connection when using the wiring tool.

Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
How can I stop LabView from crashing in that case?
Thanks for anybodies help!

Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
Thanks for your help!

Unable to connect laptop using wireless Linksys router SES 36576

I have a Linksys wireless router (SES 36576) and a new HP laptop (Vista OS). Using my old laptop running XP, I was able to connect wirelessly. Linksys indicates that my signal is EXCELLENT; however, when I input the security key and it searches for the connection, it just flat-out will not connect. I don't know where to start because I've never had this problem before. Is my router compatible??
Thanks for your help.

Hi, the number you have for your router does not match any model number for a Linksys router. Wireless routers from linksys normally have their model numbers start with WBR
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Is anybody else struggling with an intermittent connection when using the Magic Mouse/Trackpad ONLY on Boot Camp?

Hi,
I've seen thousands of posts about Bluetooth connection issues and interference and stutter/lag for both the Magic Mouse and Trackpad (affecting both Mac OS X and Windows under Boot Camp) but my problem is different.
To summarise my setup, I use:
- Retina MacBook Pro (lid closed or open, doesn't make a difference to this problem)
- Thunderbolt Display
- Wireless Keyboard
- Magic Trackpad (have also tried a Magic Mouse and experience similar issues to the Trackpad)
And in Mac OS X, everything works perfectly. The keyboard and trackpad work smoothly when I'm 6-7 metres from the machine, whether or not the laptop lid is open or closed, and whether or not the Thunderbold Display is connected.
But on to my problem: the bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
But during usage, the cursor stutters/lags frequently, and tap to click (when enabled) seems to get triggered by mistake all the time (even when I'm not touching the Trackpad or even at the computer, clicks get registered).
The Wireless Keyboard is perfect, and works well 5 metres from the machine. The Mouse and Trackpad, though, don't even work reliably when they are 6 inches from the machine. The built-in trackpad on the laptop works perfectly too, in Windows and Mac.
I spent a week assuming I was suffering from Bluetooth interference, so I tried:
- using the laptop with the lid open
- removing the Thunderbolt display completely and trying the Magic Trackpad
- repositioning items on my desk
- disabling wifi
All of these adjustments made minor differences to how good/bad the Trackpad was, but none came close to fixing the problem or making it work as smoothly as under Mac OS X. It was only after doing all of this that I realised perhaps it was just a Apple driver for Windows issue, so I booted into Mac OS X and tested everything out, and sure enough, it's all perfect. But back into Windows, the Trackpad doesn't work reliably at all.
Obviously, the hardware is not at fault, and I assume the signal strength doesn't vary between operating system (why would it?) so I'm left believing this must be a driver issue. The TrackPad and Magic Mouse drivers have been out for a couple of years, so I'm surprised they can still be this bad. I tried both the latest driver from Boot Camp 4.0 (3.2.0.0) for the Trackpad, and also the older one from Boot Camp 3.2 (3.1.0.7) and both are equally bad for me.
So my question is: has anybody else struggled with using the Trackpad (or Magic Mouse) with Boot Camp 4.0 and Windows 7 64-bit, whilst finding it to be perfect under Mac OS? I haven't found many posts complaining about the Windows driver, which is why I assumed it was an interference issue. But I'm almost sure it isn't, having spent 2 weeks investigating.
Any thoughts/suggestions/answers much appreciated!
Kyle

SOLVED!
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one. As soon as I enabled the Windows Wireless Service, the problem came back. Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem. This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer. So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
I really hope this helps others trying to use Bluetooth devices under Boot Camp. All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Cheers

VPN will not connect when using the WRT54G.

I am try to connect to my office at work from home using the WRT54G wireless router. I am using the newest vpn client, and have entered all of the information to allow the connection...but it will not connect. Am I doing something wrong? Any information will be appreciated, thanks.

hmmm ,
Did ya cheked the firewalls???
tried to ping the Host side ??
able to ping or not?
exactly what problem u coping with , clarify please.
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Eprint is turned on but will not connect when using the apps icon on the printer LJ Pro CM14151fmw?

LJ Pro CM14151fmw
systems that use this printer have Win7 32bit/ win7 64bit and windows xp 32bit. (via network)
tried updating the firmware - rebooting - manual ip vs dhcp - registered the printer - removing e-print - power cycle - adding e-print.
also forwarded the ports and added to dmz - no go... added googles dns instead of my isp. no change.(connection error)
but the printer will print any e-mail thrown and it shows on the eprint website as connected.
router is a d-link dir 615 rev b (old but reliable)
printer is not using wireless - wireless is off on printer.
printer is connect by cat5e cable.
Any ideas
regards,
Barrett
PS - brand new printer (hooked on on dec 6th 2011)

Hello,
Thanks for the post! If you have not already, I might recommend following this link and posting your question there:
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
Good Luck!
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Error generating RFC connections when using the wizard in SMSY

We are using the wizard in smsy to generate the rfc destinations but the error
Error create rfc destination back and also no read destination assigned for read access.
The user has s_rfcacl assigned on both sattelite and solman system and
we have tried deleting and recreating (by rerunning the wizard) rfc
destinations. We have also tried to manually create the rfc
destination. Any help appreciated.

Hi,
The problem still outstanding is with rfc connection SM_<SID>CLNT<CLIENT>_TRUSTED in the Solman system. The error message is [No authorization to log on as a trusted system (Trusted RC=1).]
The following roles/authorisations are allocated to the user
S_RFC
S_RFCACL
S_TABU_CLI
S_TABU_RFC
S_TABU_SHOW
S_TCODE
S_USER_GRP
and SAP_ALL.
I have regenerated the roles, etc. Deleted and recreated the trust, using wizard and manually still error. The connection from the sattelite system to the Solman works fine. Please assist further.

Super slow connection when using additional linksys SD205 router with WRT54G

Hi there,
I have a WRT54G that distributes my cable modem's internet connection. All my wired and wireless connections work perfectly.
I recently got a Linksys SD205 5 port switch and connected it to a wired port on my WRT54G router, then connected 3 network devices to this 5 port switch (a mac running OS10.4.10, a pc running winXP SP2, and a network printer).
The problem with this setup is that my internet connection has now slowed to an absolute crawl - if it works at all.
I've tried switching cables but nothing makes a difference. Plugging directly into the WRT54G eliminates the problem - network speed goes back to normal.
What am i missing here? Shouldn't this type of setup just work? Any help would be greatly appreciated!
thanks
Brendan

The WRT54G firmware is version 8. I just upgrade to v8.02. and now everything's working fine. thanks for reminding me to do the obvious
Message Edited by birdog on 09-20-2007 08:57 AM

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

Yes. The following quotation is from About Windows Migration Assistant
These are the preferred network connections, in order:
Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

same as it ever was
do it like nothing is different.
be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

WRT54G Router - Internet connection issues using the Ipod touch

Ok, first - here is my setup. I've got the router hooked into the modem, with the desktop computer hooked directly into the router. I've got my laptop running off wireless internet, and I've got an ethernet cable connecting through my laptop to an xbox for xbox live connection. I recently just got an iPod touch, and I've come to realize that whenever I'm on the iPod, it messes with the internet on the desktop computer and on the xbox, but not the laptop really.. it makes the internet really slow, or sometimes it doesn't work at all, especially on the xbox. Is there anything I can change to make these all work at the same time? Or is this too many connections or what? Please help. thanx.
(running windows vista home premium, WRT54G router, pretty much beginner status, though I can follow directions easily : ] )
Also, the internet always works on the ipod, it seems as though the ipod is 'taking over' the internet.. it doesn't lose it while in the area, yet the other computers and xbox does at times..
Message Edited by jmaxey0122 on 12-16-2009 05:27 AM

You might be facing the problem, because the Ipod and your Desktop computer must be having the same IP address thats the reason whenever your IPod is connected to your Network, your Desktop must be getting disconnected. Check the IP address of your IPOD and of your Desktop Computer.
First thing which you need to check, if the Physical connections are done properly. Connect the Modem to the Internet Port of the Linksys Router and then Connect the computer to the LAN Port No.1. On your Desktop computer login to the setup page of your Router and click on the Status tab and check "Internet IP address"
If required you can Re-Set your Router and Re-configure all the settings on your Router from the scratch.

HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

I'm new to this and I think I typed a long heading!
Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
I've searched the web but all asume iTunes can see the device.
Help!?

Hi David,
If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

Unablr to connect when using the Linksys router

Similar Messages

Maybe you are looking for