Unablt to post stock from QI to Unrestricted (QM enabled)

Hi All,
Am facing an issue where a quantity of stock is residing in QI which I am unable to transfer to unrestricted. An Inspection lot (Inspection type 08) had got created for Movement type 309 and due to some reason, the Inspection lot has got cancelled. I tried to transfer post the stock from QI to unresticted but id does not allow me to stating that the Inspection stock should be changed in QM. How do I go about to sort this issue.
Thanks in advance.
Regards,
Imran

Hi Lokesh,
Appreciate your time and effort. Please find my response to your queries below:
1. Check for sufficient stock svailability in both the materials - A stock quantity of 10 was transferred from Material A to Material B with Mvt Type 309. Hence this stock of 10 now resides in Quality Inspection.
2. Check whether storage location pick points extended for both the material - Both the materials are in the same storage location hence the requirement to extend does not exist.
3. Check for batch activation, if yes check for batch restriction or check whther u hv specified correct batch pick points - Batch Management is activated, no batch restriction exists.
4. Check whther material is stock relevant and not activated for special stock indicators. ensure stock not posted to cost center for direct consumption. - Material is stock relevant and is activated for special stock indicator. It is not posted to a Cost center.
5. Check Inspection lot status for REL CALC SPRQ. - Inspection Lot status is REL CALC SPRQ
Also note that the Material is an AFS Material.
Regards,
Imran

Similar Messages

Error while posting stock from quality to return delivery

Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
Ilyas

Hi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir

Moving the stock from quality to unrestricted.

Hello Experts,
This is regarding QM issue.
in inspection lot certain lot quantity is entered in quality and it is not cleared.
the system status for that lot in QA03 is UD ICCO PRII STUP
now the question is how to clear this one.
even i checked for inconsistency,but there is no inconsistency exits.
kindly tell me how to proceed further and solve this issue.
Regards,
santosh.

Hi Santosh, Yes no problem. You can post.
You have now identified the correct lot.
Select this lot and click on execute button. Then go to stock posting tab and post the remaining quantity to unrestricted use.
Itu2019s absolutely correct to post the stock against this lot.
In fact we can say earlier selected lot was incorrect as it was not having status ending with SPRQ or SPST. I explain this to you.
For material XYZ, 5 inspection lots are created containing 20 Qyt each (say lot numbers are 1,2,3,4 and 5). When you look at MMBE, you will see that quantity 100 is lying in quality inspection which is the sum of all lots quantities.
Now one by one you go on posting stock to unrestricted and giving UD. Accidently you gave UD for lot number 3 without posting the stock. Now system will show 20 Qty in quality inspection in MMBE. Here the first task to identify the correct lot against which we did not carry out stock posting. In order to identify this correct lot number against which stock posting was not done, we execute QVM2 transaction. Here lot number 3 has status SPRQ i.e. stock posting required. If you try to post the stock against lot other than 3, system will definitely throw error because it was already posted.
Hence the output of QVM2 always gives the correct lot against which stock posting is not done.
Regards,
Anand Rao

How to list the transfer posting document from quality to unrestricted

hi experts,
i can get GR documents by using MB51
but how to get list of documents from quality to unrestricted and blocked to quality tranferpostings
thank you
ganesh

You can get all the Details in MB51 by Selecting Proper Movement types.
For Eg: Gr Docs using 101, GR Blocked Using 103 and GR Blocked Released using 105 etc.
Regards,
Ashok

Transfer posting stocks from quality inspection to unrestricted, problem

Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,

Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards,

Posting goods from quality to unrestricted status CRTD CHCR......

Hi Guru's,.
I have one issue.
In QA32 my lot is in CRTD CHCR SPRQ. I have not made quality plan for that.in MM01,quality view i activated inspection type 01.
now in mmbe stock is showing in quality.
i want to do transfer posting from quality to unristricted stock.i dont want to use quality plan assign to that lot.
I tried MB1B movemet type 321. i am getting error Change the inspection stock of article 1111030200267 in QM only.
Is any way to do that,transfer posting.
Regards,
siddharth

Hi,
As your lot has been at CRTD status you need to released by assigning inspection plan.
In QA02 --change inspection lot or in QA32 select lot line item & click on inspection lot so that you can be able to enter in change lot.
In which you can assign your inspection plan ,you will find icon inspec tasl list ,click on same icon.so that you will get message inspection plan assigned , .If system wont allowe you then same screen usage ( You have to select same usage by which you created inspection plan.)
Save the transaction & refresh the QA32 screen
Regards
SANIL

Stock from qua;ity to unrestricted

Hi All,
Is there any transaction code for quantity released from quality to unrestricted use(stock)?
Or is there any report for that?
My client requires a report on this.
Reward points for helpful answer.
Regards
Ashis

hi
Goto MB51
Give the Movement type as 321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
and also 322 for reversal of 321
If you want to transfer stock from Quality to Unrestricted then go to MB1B and do transfer using movement type 321
Regards

Moving the stock to inspection to unrestricted

hi,
i completed the flow from gr to destination bin flow but the stock remains in quality inspection not in unrestricted use. how to move the stock from quality inspection to unrestricted use.(without changing the bin number)
Regards
muthuraman

Hi Muthuraman,
You want to transfer the stock from quality to unrestricted. you may follow the below process:
1, do transfer posting of the material from Quality to unrestricted in MB1B with 321 .
it will generate the posting change no.
2. create a Transfer order in LT06 with respect to the above material document no.
it will put the stock in interiam storage type 922.
3. confirm the TO.
hope this will help.
regards,
Anubhab

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

Remove stock from Quality Inspection

Dear All,
In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
Now the Plant in which MIGO was prepared has no quality related data maintained.
We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
Thanks in advance,
Nirav

Did you identify the original material document and then try MBST transaction to cancel the document?
When you use the term "reverse" it sound like you are trying to do a 102 against the 101. You can't reverse the transaction, you have to use MBST to cancel the transaction.
Otherwise you have to set up enough QM data to process the lot.
FF

How to cancel UD & to reverse stock which posted from QI to Unrestricted?

Dear Experts,
I have created STO for stock transfer from plant 2 to plant 1. Delivery, PGI, Excise Invoice has been confirmed at plant 2. Subsequently GR has been made with ref. to delivery doc. at plant 1. Being the transfered material is subject to QM. Automatic stock posting has been happened and stock has been posted to QI stock. Subsequently UD and stock posting from QI to Unrestricted has performed.
Now problem is, as profit center for plant 2 has been maintained wrongly in material master and without checking the profit center data at plant 2 in mat.master, all the above mentioned activities has been made. So, i want to reverse all the documents(GR, GI, STO).
Kindly guide me how to proceed in the above regards. Thanks in advance.
Regards,
Kumar

May use MB01>mvt type 102 with reference to original document>pick stock from unresticted.-->save.
if this is not possible the you have to bring back the stock in QI by using SAP NOTE 175842 ,then cancel original document

Revaluation in stock transfer to Sales Order stock from unrestricted

User is trying to do a stock transfer posting from unrestricted to Sales order stock. Now the system is throwing an error saying that account setting has not been done for UMB (OBYC setting). I have given the GL for this UMB transaction type in OBYC> UMB is for posting Gain/Loss from revaluation.
I dont understand how a revauation happens when we transfer stock from unrestricted to Sales Order Stock ? What is the purpose of that in our scenario, could you please explain.

Hi:
Normally it should not happen in case of stock transfer posting. Please check the movement type settings for valuation class of your material and see if the transaction type UMB has been set against valuation class in OMJJ...Account grouping.
Hope it will help you.
Regards

STO from unrestricted to E stock from TAB item in Sales Order?

Hi all,
We have the situation where we are shipping stock intra-company via the STO Process. The requirements are being driven of a TAB item on the Sales Order, and the purchase req is being generated automatically, and being converted to STO > Delivery > Shipped then received at requesting plant.
If we leave the Dependent Requirements Indicator on MRP4 in Material Master to blank the stock is shipped from the shipping plant as Sales Order stock and received into the requesting plant as Sales Order stock. If we change the Dependent Requirements Indicator on MRP4 in material Master to '2' then it trys to ship the stock as unrestricted, and the theory is that is should be received as Sales Order stock.
Shipping as Unrestricted and receiving as Sales Order stock is exactly the scenario we are trying to achieve.
We initially ran into an issue with error message M7146. OSS Note 305582 describes this situation, and says we need to change the consumption posting on Account Assignment Catgegory M to be 'E - Accounting via Sales Order'.
So we changed this, and now when we try and create the Sales Order we get an error message kd051 Maintain a Settlement Profile. We are told by our Finance people that we cannot use the Sales Order as a cost collector as it impacts the PA reporting, so I am wondering if anyone has any suggestions as to how we can resolve this issue.
Many Thanks.

Dear all,
can u update me with the depot to depot process   ( like there some 20 qty in 1300 depot   i wanted to transfer the 20 qty to 1200 depot)
what is the process should be followed
i am still not getting the right way
please guide me    my process i am following is :
supplying plant
Create a STO PO from receiving plant T-code ME21n
Create delivery with ref to STO PO   T-code VL10b
Post goods issue     T-code VL02n
Create Depot Excise invoice with Reference to delivery document T-code J1IJ
Create pro-forma invoice   T-code VF01
Receving plant
Goods receipt   (With out excise capture selection) T-code MIGO
Capture excise invoice at depot (Enter challan qty and Excise baseAmount) T-code J1IG
Please guide me on this as it is critical

IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore

Able to post Invoice for Blocked stock from quality

Hi
I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
It should allow me to process the 30 pcs only which are in unres. stock .
How do I block the blocked stock from getting invoiced ?
Please help
Thanks
Samuel

Dear Jurgen
Thanks for the reply, master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
Is there any normal config setting to stop it form geting picked during MIRO.
Thanks

Unablt to post stock from QI to Unrestricted (QM enabled)

Similar Messages

Maybe you are looking for