Unallocated Disk Space after Recovery

I performed a system recovery to factory settings that resulted in my Disk space being distributed differently than before. I have a lot of unallocated space as you can see bellow. I need to know how to fix and how to prevent this from happening the next time I perform a recovery. Also, is it normal for the RECOVERY (D) partition to show multiple times in Disk Management ?
Thanks.
This question was solved.
View Solution.

Hi,
You can extend the C partition into the 'unallocated space' as follows.
Once again, hold down the Windows Key and press R.  Into the Run Box type compmgmt.msc and hit enter.  Click Disk Management in the left pane and let the drives load up.
In the lower graphical view of the partitions, right click the C partition and select 'Extend Volume'.
In the following window, click Next.
In the next window, using the 'Select the amount of space in Mb' make sure that this is showing the same figure as the 'Maximum available space in Mb' figure that is listed just above ( adjust it if necessary ).
Then click on Next and click on Finish.
This may take a few minutes to complete.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Low disk space in recovery disk (d) drive in window 8.1

    I continue to receive the subject warning. I have never added any files to D, but I have 32.3 MB free of 25.5 GB. I have Administrator privilrges but am unable to view the files on D. When I click on recovery, I get an HP warning.

    Hi @pjd10 
    I grasp that you are a low disk space error on recovery D.  I regret that you are having that difficulty.
    Here is a link to HP PCs - Error: Low Disk Space. You are running out of disk space on Recovery (Windows 8) that should guide you to resolving this issue.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Low disk space on recovery disk (d) drive

    Okay, I am so tired of receiving Low Disk Space on recovery (D). I have done everything it asked. Empty Recycle Bin which is EMPTY. I am not a computer wizard but it seems unfair that I have pay over $150.00 year to correct this problem once a year. I have checked a lot of places and it just keeps telling me the same thing. That doesn't work. Can someone explain to me in English (plain) how to correct this problem.
    I did just install a HP wireless printer 3052A
    [email protected]
    HP Pavilion dv6000
    Windows Vista (home version)
    This question was solved.
    View Solution.

    I have done what you have said but dont know if it worked

  • How many free disk space after install OS X lion (10.7) ?

    Hi,
    I would like to know that how many free disk space after install OS X lion (10.7) on MBA i5.
    Many Thanks,
    Eric

    I want to buy MBA i5, I would like to free disk space of MBA 13" i5, Could anyone tell it to me? Thanks
    As you're buing a new MacBook Air, it will come pre-installed with Lion.  The actual installation will be somewhat larger than a "clean" Lion install as it will come with iLife preinstalled.  Obviously, with an Air's limited storage space, you want to be sure that you have enough room for any applications and data that you'll want to keep on the SSD as well.  It is fairly easy to upgrade the SSD on an Air:
    http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Express
    The amount of RAM you have installed is probably more important.  Fortunately, the newest 13" MacBook Airs all come with 4GB standard now.

  • Losing disk space after installing Mavericks

    After installing OS X Mavericks, I had noticed my computer was losing disk space after updating some products. I even shut down my computer to allow it to readjust to the updates, cleared some unnecessary apps, and yet I see my computer losing more space, as if files are being added behind the scenes. I've adjusted my browser Safari to more private settings,even cleared the cache, to avoid this, yet it still occurs. Are there other files I should be clearing?

    the trouble is I don't know what is causing the disk space to be taken. I'm idly using Safari with private browsing set, when I come looking at my finder, seeing the space gradually falling. I was at 695.02 GB available this morning, and now at 694.83 GB available. I've made no downloads in between then, so I'm wondering if this is the result of downloading Mavericks directly from the app store, or if there is a setting I need to fix. I've tried verrifying/repairing the disk, permissions too, but I still see the decrease occurring.

  • Database msdb cannot be opened due to inaccessible files or insufficient memory or disk space - in recovery pending status

    came in this fine monday morning and it looks like developers were running some kind of trace that filled the primary DATA folder with about 80,000 5mb trace files.  now that process has stopped and the logfiles have been cleaned up, but when attempting to connect to the server using the management console i get the error:
    Database 'msdb' cannot be opened due to inaccessible files or insufficient memory or disk space.  See the SQL Server errorlog for details. (.Net SqlClient Data Provider)
    when i check the status it is in recovery pending mode.  i have a backup from yesterday but im not sure if this database became corrupt before that backup or not because this process was ongoing over the weekend.  the last timestamp on the msdb and log files is 7am this morning.. 
    I am not sure how to proceed recovering the msdb database with limiting interruption to the users.  any advice is extremely appreciated.  this is sql server 2008.  i can login via sqlcmd and see it is in recovery pending status:
    1> select state_desc databasestatus_sysdtabase from
    2> sys.databases where name ='msdb'
    3> go
    select state_desc databasestatus_sysdtabase from
    sys.databases where name ='msdb'
    databasestatus_sysdtabase
    RECOVERY_PENDING
    (1 rows affected)
    1>

    For someone experiencing a similar problem this answer is unacceptable. You're basically telling me to reboot the server to fix this.  You vaguely mention using process explorer to find out who is using the file.  Can you please provide
    some more information on that?  I have a similar problem and rebooting the server to fix it is not an option.  This problem keeps reoccurring.
    OS Error 32 means file has an open handle by someone else. If that is a user process then you can catch it via Process Explorer. If it's a kernel mode object then it's difficult to catch that and restart is the only choice.
    http://sqlserver-help.com/2014/08/07/tips-and-tricks-os-error-32the-process-cannot-access-the-file-because-it-is-being-used-by-another-process/
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Lost disk space after each reinstall.

    I've had to reinstall leopard on my macbook three times in the last week for different reasons. After each reinstall(erase and install) it appeared that I lost a little more GB to the HDD. I have a 250GB HDD, and I know it actualls reads as 232.87, but without uploading any media and only using the reinstall disks that came with the box, I have only 218 or so GB. Is this normal? I can't find the numbers anywhere; they just don't add up.

    Anthony Turtzo wrote:
    I can't find the numbers anywhere; they just don't add up.
    My guess is that you have added up the sizes of the folders visible in Finder at the root level of the drive (Applications, Library, System, & Users) & compared that total to the total space used on the drive. The two numbers will not match because there are also hidden files & folders at the root level of the drive that Finder does not normally show. The hidden items are necessary for the proper operation of the Mac & in normal use are managed by the system. Since users should not tamper with them directly without good reason & it requires expert knowledge to do so without breaking anything, they have been made invisible in the Finder view.
    It is normal for the drive space used by these items to fluctuate, & for the total to grow somewhat after first installing the OS. Some of the items contain temporary files that are created & destroyed as needed. Some contain usage, crash, & other informational logs that are managed by routines that the system automatically runs periodically to keep their total from becoming too large. Others contain initialization data gathered over time that the system uses to start up or to run processes efficiently.
    Thus, there is no fixed correct number for their total size since that depends on the history & current state of the machine. On my iMac G5, one large hidden folder ("var") currently uses about 1.05 GB of drive space, but consider that only a ballpark number since it may be considerably different on different Macs at different times.
    If you are still concerned about the health of the drive, especially that something is eating up disk space unnecessarily, then run Disk Utility to check it. In the "First Aid" tab select your drive & click the "Verify Disk" button. If this reports no problems then you can be pretty sure there is nothing to worry about.

  • Physical disk space after ORACLE reorganization with brtools

    Hi all! .
    I perform reorganization after arсhiving with brtools. In db02 shows that free size in tablespace are increased but physical disk space not changed.
    Can i make changes in online with brtools to increase physical disk space in reorganized tablespaces? 
    system ver. :  ECC 5.0,   oracle 9.2.0.7.0, BRTOOLS 6.40 (52)
    Thanks for help!
    Edited by: Andrey Burakov on Jun 14, 2011 7:39 AM

    Andrey Burakov wrote:
    Hi all! .
    > I perform reorganization after arсhiving with brtools. In db02 shows that free size in tablespace are increased but physical disk space not changed.
    > Can i make changes in online with brtools to increase physical disk space in reorganized tablespaces? 
    > system ver. :  ECC 5.0,   oracle 9.2.0.7.0, BRTOOLS 6.40 (52)
    > Thanks for help!
    >
    > Edited by: Andrey Burakov on Jun 14, 2011 7:39 AM
    Hi Andrey,
    You need to reorganize whole tablespace, not only tables in order to reclaim the free space to the OS.
    The prerequisite for online reorganization is:
    Oracle 9.2 database or higher.
    The prerequisite for online conversion of the LONG-fields into LOB-fields:
    Oracle 10g database or higher.
    Online conversion is supported for SAP kernel 7.00 or higher. For SAP kernel 6.40,
    it is supported only in a restricted manner (see "Caution" in point III). Conversion is
    not supported for SAP systems with a kernel lower than 6.40.
    Check the note 646681 - Reorganizing tables with BRSPACE
    Best regards,
    Orkun Gedik
    Edited by: Orkun Gedik on Jun 14, 2011 9:10 AM

  • Lost disk space after Avast anti-virus scan

    I used the free Avast anti-virus software to scan my MacBook Air running Mavericks and after the scan about 30 GB of disk space seems to have vanished according to software like Freespace but not according to the Finder's "Get Info" function.  Where is it?  How can I get it back?

    In anticipation that most of the responses here would be to uninstall Avast, I did that and it did not solve the problem.
    So I ask again:  Does anyone have a solution that is actually a solution.
    I am not interested in yet another lecture on how Macs don't have viruses etc etc.  Whether or not they do now, there is no real reason they can't should some teenager in Russia take on the challenge of writing such viruses.   Also, I use Parallels to run some essential Windows applications and I'm sure I will pick up viruses that way.  I have the Windows version of Avast installed in the virtual machine and so far no problems with it--and that I'm keeping unless someone has a better idea for free Windows anti-viral software.
    I am a long-time Mac user and I've heard it all, so spare me.  Just advise if you have a specific solution to the problem I've got.

  • Losing disk space after upgrade of Mavericks

    The download and installation was successful. However, after restarting and before upgrading all free iWork apps including iTunes and iPhoto. I noticed that after recovering about 10gb of disk space, it started reducing it again.  I continued with the upgrade of the said apps, but after leaving my mbp for a few hours it started losing disk space again. this time its agresssive, i've lost around 40gb overnight, without using any apps or activating any updates.  Please help!

    It sounds like Time Machine is turned ON and the computer is making backups to the hard disk.  This space is freed automatically, if required by the OS.

  • Why Oracle Linux 5 cannot recover disk space after delete files ?

    Folks,
    Hello. When I create a Virtual Machine for Oracle Linux 5 to install EBS R12, I allocate 300GB to the VM. I download EBS R12 Source Files (45.7GB) and unzip the files (46GB). Total size of stage area directory(EBS_R12) is 91.7GB.
    Because some files are corrupted and cannot install, I move the folder EBS_R12 into trash but cannot empty trash. I move EBS_R12 from trash back to the directory. Then at root user, use command "rm -rf " to delete EBS_R12 completely.
    I shut down Oracle Linux 5 and restart it, 91.7GB disk space cannot recover.
    I download some other files into Oracle Linux files and then delete those files, but disk space cannot be recovered either.
    It seems that OEL5 virtual disk only can expand but cannot be reduced. The VM disk space is less than 200GB now and not enough to install EBS R12.
    Can any folks tell me how to make 91.7GB disk space and some more disk space come up ?

    Folks,
    Hello. Thanks a lot for replying.
    Host OS is Windows 7, Guest OS is Oracle Linux 5 on the top of VMPlayer 3. The VM of Oracle Linux 5 is created on the external USB drive and not on the local hard disk.
    There is a directory /tmp/VMwareDnd/376c7cae/EBS_R12 in Oracle Linux 5 file system. I copy/Paste the folder of EBS_R12 from Windows 7 into Oracle Linux 5. All of zip files and unzipped files are placed in the folder of EBS_R12.
    After EBS_R12 is deleted, the external USB drive(F:) doesn't come up 91.7GB disk space.
    My question is:
    Where to run "boot>linux rescue" command ?
    Does this command work correctly in the external USB drive ?

  • Reclaim disk space after delete an index

    Hi ,
    I have deleted unused indexes from a history table to reclaim the disk space was allocated for these indexes , yet the size on the disk is the same , any steps I can follow to achieve this would be greatly appreciated..
    indexes size is 70 GB
    table size is 45 GB , # of rows is above 200 Million
    Thanks in advance

    in order to reclaim space after your big delete.  Don't shrink your data files unless you have no other choice.
    The space will automatically go back to SQL server. You don't have to do anything.
    The database size will be the same plus the growth of your log file due to logging the transactions. However, internally, SQL server knows that it still has that space to play with.
    Other wise you can go for  update the statistics and rebuild indexes . but I think it would be the part of your normal weekend nightly maintenance plan
    Please click "Propose
    As Answer" if a post solves your problem, or "Vote
    As Helpful" if a post has been useful to you

  • REFS, lost hard disk space after Windows defragmentation

    Hi,
    first some short information about the Server.
    Windows Server 2012 Datacenter
    OS disk = 60 GB SSD
    Physical raid Controller: Areca ARC-1261
    Raid  = Level 6
    Used Disks = 11 x 2TB + 1 hot spare
    File system = REFS
    Usable space = 16,3 TB
    Real used space (what the tools and folder properties counted) = 14,0 TB
    Used space (what i see in the computer overview) = 15,4 TB
    Unknown space what I could see with disk scan tool (or the tools calculated) = 1,4 TB
    So here what you could quickly see that i've got a "little" problem with wasted/unknown space....
    How the Problem originated:
    The system drive is a SSD, after running this Server about 150 days and unnecessary little Windows problems i remembered the garbage collector for SSD (TRIM).
    So i wanted to schedule with "Defragment and Optimize Drives" an automatic job for cleaning the drive.
    My problem was, that I couldn't deselect the big raid volume, but i gave it a try an scheduled weekly the optimization.
    Next day i got some alerts "low disk space warnings", i've lost about 1 TB of disk space but could not explain how I could lost this amount of space.
    After starting a resizing of the raid, i counted with file property the real used space and could not explain the shown size in the overview.
    What I've tried to fix this problem:
    First of all, a lot of google....
    Shadow copy: checked, fully cleaned, disabled = nothing just a few GB.
    Backup: checked, fully cleaned, disabled = nothing, but ran under an extra disk but... could never know what's wrong
    Folder options: enabled this far that i could see system protected files and default hidden
    Safe boot = tried a safe boot (some solutions for different user in the web) = nothing could not see more or less
    O & O Defrag (latest server edition) = didn't support REFS
    last of it, new clean installation of windows
    My Questions:
    Is defragmentation on refs possible/useful or is it just an bug with that  "Defragment and Optimize Drives" tool?
    Are the any information's about fixing troubles on REFS or commands on PS oder cmd? (could not find anything on google)
    I've got some books for WS2012 and e-books but there are no helpful information's about REFS.
    I know this is a big text block, but i wanted to show you detailed the problem and my attempts to solve this problem. 
     I hope you could help me or show me new ways to solve this problem.
    Tanks in future....!

    ReFS formats by default to 64KB block sizes (shows up in Disk Management as "Allocation Unit Size" when you go try formatting).
    NTFS formats by default to 4 KB block sizes and up to 64KB.
    If you have 1 file that is 4KB in size, and you use ReFS (default block size), it's going to occupy the entire 64KB.  That is true of NTFS if you choose to format in 64KB (required for SQL and Hyper-V VHD's and VHDX's).
    If your files are smaller than 64K, then stick with NTFS.
    Yong Rhee [MSFT]
    That is true for the defaults for ReFS but its possible to use a smaller allocation size using the options. Unfortunately most never think to do that.
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • Lost Disk space after Reinstalling Leopard

    I upgraded my Mac OS v.10.4.9 to Leopard v.10.5.1 in May and after Leopard was installed I had about 13 GB HD space left. It was lightning quick too. The new OS was v.10.5.1
    Since then I've been downloading regular Security updates as they were prompted until the OS reached v.10.5.5 but the whole thing was gradually getting slower too so I figured I would reinstall Leopard and take it back to v.10.5.1 to see if it was back to the high speed it had when I originally installed Leopard v.10.5.1.
    After I re-installed Leopard last week and it was back to v.10.5.1 it went back to running superfast again, but yesterday I started getting a notice that said I was running low on Startup disk space and I needed to delete some stuff to gain space.
    When I checked available space I have less than 1 GB, about 300MB.
    It seems that by re-installing Leopard it has been written adjacent to the 10.5.5 instead of on top of it, which I thought it would do automatically.
    I found a file named 'Previous systems' on the HD and deleted that but it screwed it up so I had to restore that and now it's back to normal but I've still got less than 1 GB disk space.
    Can anyone tell me how to delete my old operating systems (both the 10.5.5 and the 10.4.9 that I presume is still on there, which I originally upgraded to Leopard.)
    I'm a conservative user of disk space and I deleted all my photos and only gained about 20 MB of new space so I'm pretty sure the problem is the OS's are written adjacent to each other instead of on top of each other.

    Barry,
    Thank you for your help.
    When I deleted the Previous Systems file it was about 7 months after the Leopard installation.
    You are right, I did do an Archive and Install in order to maintain all my info from v10.4.9.
    The problem I encountered after I deleted the Previous Systems file was I then did a Secure Empty Trash and as it was emptying it was showing over 200,000 items and still upticking and that worried me that I had done the wrong thing by deleting the Previous Systems file.
    So I stopped the Emptying process, and did a restart, thinking my HD space may be restored if the file was indeed possible to be deleted.
    When it restarted that time, instead of the usual boot up process, there was a small flashing square box in the centre of a grey background, the small box had a blue earth in it and that went on flashing for maybe 20 minutes.
    It eventually booted up and so I went to the trash, where the now presumably slightly diminished Previous Systems file was, and I dragged that file back into the HD and re-started the machine.
    The world sign again flashed on, but this time for maybe only 10 minutes before it booted OK.
    I checked and I was back to v.10.5.1 bit still with only about 300MB Disk space.
    That's when I deleted all my photos but that only gave me about 20MB so now I'm up to about 320 MB - but as you say that is nowhere near enough.
    But I do notice a definite increase in speed using 10.5.1 compared to 10.5.5. Those Security Updates have dragged it down badly.
    Now that you have explained that the Previous Systems file may be safely deleted then I will try that again and let it run its course this time.
    I'll let you know what happens.
    Thanks again,
    ann

  • Missing hard disk space after sims 3 force quit

    Hi, I failed to notice I had to update to the latest version of Leopard to install the game with the result that the installer got stuck repeatedly half way through and I could only force quit the installer.
    The downside to this is that I did this twice and now I'm missing around 7 gigs of hard disk space....anyone know where I can find the files to delete or how I can regain that space?

    DiskWarrior, as suggests nerowolfe, won't hurt for sure. It will repair damages done to files and the directory.
    Maybe you could spot where the problem files are with this freeware, Disk Inventory X. You probably could identify files that are related to the game that are left on the hard drive. Did you do a Spotlight search to see if there any left?
    And I'm also wondering if it wouldn't help to clean out all the caches in case there are temp files stuck in there? Download MainMenu and use it to clean out all the caches like so:
    Uploaded with plasq's Skitch!
    For the system cache clean up, choose +Deep Clean+. You will need to restart after the caches have been cleared.
    Report back to let us know how it goes. Good luck!

Maybe you are looking for

  • Error message that it cant be opened because of missing files.

    I am trying to download my Elements 12 and I keep getting a message that I can't open it because there are missing files. Any suggestions?

  • KANBAN for external Procurement and Purchase order

    Good morning I am working with kanban for external procurement Through  PKBC-transaction I set "empty status" and SAP creates the purchase order is it possible to create 1 purchase order about 2 or more item? in which way? thanks

  • "Mail" question (right board for this?)

    My emails show only the most recent part of email conversations when I know there is more correspondence.  Do I have to change my default settings?  I even went to  "Find Out How" before posting here.  Is it just me or shouldn't all email programs sh

  • [Request] Serious Sam: The First Encounter

    Screenshot: http://pcmedia.ign.com/media/previews/i … amb006.jpg http://pcmedia.ign.com/media/previews/i … amb009.jpg http://pcmedia.ign.com/media/previews/i … amb012.jpg Videos: http://es.youtube.com/watch?v=gtdXhN3EM … ed&search= http://es.youtube.

  • SSGD 4.x and Windows Vista?

    Hello. Has anyone ever tried SSGD 4.x (where x ranges from 0 to 3) with Windows Vista? I'd appreciate any feedback. Thanks, Rob