UNALLOCATED not working in CODA

Hello
I have customized the UNALLOCATED for dummy posting purpose when an external transaction code is not known. this works for MT940, but when using it in the CODA uploadingproces (RFEBBECODA00), the statement results in an error 'EXT. TR. ASSIGN FOR /BE /0403000 /-'..
0403000 is the unknown external transaction
Note Note 718157 - El.account statement: Error FB773 misleading (UNALLOCATED) has been implemented. Anyone?
Dt123

Ok Solved. on the selectionscreen of RFEBBECODA00 just mark the option DUMMY EXTERNAL TRANSACTION and fill in a dummy External Code (like 999999)
Create the dummy code (like 999999) in customizing and assign it to the dummy posting rule.
Edited by: M. Semmelink on Sep 30, 2010 1:41 PM

Similar Messages

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

The new Update with the Patch for Camera Raw is not working. Code U44M1P34

Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
Joerg

Hi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine.

Satellite Pro A210 DVD Drive not working - error code 39

Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?

Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help!

302 Redirect Location Header Rewrite not working with code upgrade

Hi,
Description:
We have a portal webservice hosted by an ACE4710. It has two services (www/https) on the same IP 10.1.1.1.
One is a redirect service that redirects all requests to tcp/80 on this ip to the other which is a 'standard' https proxy service.
The backend servers are http only. Externally everything needs to be https.
So we have an ssl proxy and Location header http to https rewrite on the https service.
The configuration below operates correctly on v5_1_2.
But with a code upgrade to 5_3_1b, the Location header rewrite does not work.
We've tried several different configurations and even 'ssl url location rewrite ".*". It just looks like the ACE is completely ignoring the configuration to rewrite the Location field.
Reverting to the older code fixes the problem.
Problem seen:
Here is the problem as seen on the *client*. The 302 redirect Location header is NOT rewritten:
Response headers:
HTTP/1.1 302 FOUND
Server: nginx
Date: Fri, 20 Mar 2015 10:59:43 GMT
Content-Type: text/html; charset=utf-8
Content-Length: 295
Connection: keep-alive
Location: http://website.liveportal.nhs.uk/homepage/information
Cache-Control: no-cache, no-store
Set-Cookie: information=35a7831d-928d-4122-aef3-39ef48ac4440; Path=/; secure; HttpOnly
X-Frame-Options: DENY
HTTPSampleResult fields:
ContentType: text/html; charset=utf-8
DataEncoding: utf-8
Config extract:
1) Set up the servers (4 normal on tcp/80 and one for a redirect)
rserver host WEBSERVICE-1
ip address 192.168.1.1
conn-limit max 200000 min 160000
inservice
...and the same for the other three
rserver redirect PORTAL_REDIRECT
webhost-redirection https://%h/%p 302
inservice
2) Set up the server farms
serverfarm host PORTAL_LIVE
probe webping
rserver WEBSERVICE-1 80
    inservice
rserver WEBSERVICE-2 80
    inservice
rserver WEBSERVICE-3 80
    inservice
rserver WEBSERVICE-4 80
    inservice
serverfarm redirect PORTAL_HTTP_REDIRECT
rserver PORTAL_REDIRECT
    inservice
3) Setup the ssl proxy and a location rewrite to https for responses from the servers
action-list type modify http HTTPS_LOCATION
header rewrite response Location header-value "http://(.*)" replace "https://%1"
ssl-proxy service WEB_SSL_PROXY
key webportal.key
cert webportal.crt
chaingroup root-chain
ssl advanced-options SSL-SECURE-STRONG-WEB
4) Set up the L4 services
class-map match-all PORTAL_HTTP
2 match virtual-address 10.1.1.1 tcp eq www
class-map match-all PORTAL_SSL
2 match virtual-address 10.1.1.1 tcp eq https
5) Setup the policy maps - one for the reals servers with header rewrite for redirects
policy-map type loadbalance http first-match PORTAL_HTTP
class class-default
    serverfarm PORTAL_HTTP_REDIRECT
policy-map type loadbalance http first-match PORTAL_SSL
class class-default
    serverfarm PORTAL_LIVE
    action HTTPS_LOCATION
6) Create the service policy
policy-map multi-match EXTERNAL-SERVICES
class PORTAL_SSL
    loadbalance vip inservice
    loadbalance policy PORTAL_SSL
    loadbalance vip icmp-reply
    appl-parameter http advanced-options PARAM-HTTP
    ssl-proxy server WEB_SSL_PROXY
class PORTAL_HTTP
    loadbalance vip inservice
    loadbalance policy PORTAL_HTTP
    loadbalance vip icmp-reply
7) Apply to the interface
interface vlan 211
description External Access
ip address x.x.x.x 255.255.255.0
alias x.x.x.x 255.255.255.0
peer ip address x.x.x.x 255.255.255.0
access-group input PERMIT-ALL
service-policy input EXTERNAL-SERVICES
no shutdown

I found that the v5_3_1b code seems to need a bit of extra configuration and it now works ok.
parameter-map type http PARAM_HTTP
header modify per-request
no persistence-rebalance
case-insensitive

My ITunes will not work error code 2503

window XP cannot uninstall ITunes. ITunes will not operate. error code 2503

Hello, bearbassman.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

Editable regions not working in code view

I am working in DW MX, Windows XP. I am making changes to
current pages and have also created a new template page (based on
an existing template) for additional pages.
All of my pages are based on templates, which have editable
regions. For some reason when I try to make a change in the code
view I get this error:
"Making this change would require changing code that's locked
by a template or a translator. The change will be discarded."
However, I do not get this message when I make changes in the
design view.
I am definitely attempting to make changes in the editable
region so I'm stumped why this is suddenly happening.
Any ideas?
my page:
http://www.westianet.com/internet/secureit/secureit.htm

Pleaes restate your problem's symptoms, and include some code
to
demonstrate.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Cole_Marie" <[email protected]> wrote in
message
news:en3lqg$3jk$[email protected]..
> Did you ever resolve this issue. I'm having the same
problem. Using DW8
> , XP.

DVD burner not working Error code 0x80020022 & 0x8002006E

When I try to burn a DVD I get the following errors . (Error code 0x80020022) & (0x8002006E)
When I put a dvd movie in it will show on the desktop and play in dvd Player.
It will show a CD in the finder and will play it in the finder and in iTunes. iTunes is can also burn CD.
I have brunt some dvds in the past month but it was hit and miss. Now I can not burn any dvds.
I booted up my iMac from my MacBook when I go to burn the dvd I get the same error. So now I'm not to sure if it is a software issue. I have also done a restart while holding P & R "option & Apple" to reset the Pram.
I'm going to erase the HD tonight and reinstall OS 10.5 to see if that fixes the problem.
If there is anything more I can do please let me know. I dont mind replacing the Supper Drive but I dont want to spend the money if that is not going to fix the problem.

I keep getting this code come up when i try to burn 0x80020022. My imac is 8 months old, and after looking on mac forums the only thing that seems to work is to go in and play around with the international system prefs. It will then burn a CD, although very slowly. A week later I go to burn a cd and this happens again! This surely can't be right with an 8 month old machine, and does this mean my DVD drive is going to die soon? I can't keep having to adjust the prefs every week.
Does anybody have any answers?
Cheers

Sync is not working with code from my Android

I had to reinstall ubuntu 13.10 on my desktop and am trying to sync it back with my phone, but when i enter the 4x3 code it's asking me to create or sign in and enter my recovery key, except I can't get my recovery key from my phone.

If your phone is still connected to the sync server then you need to get the 12-character code on the desktop computer and enter that code on the mobile device to pair the desktop computer.
*Android OS > Settings > Accounts > Firefox Sync > Pair a new Device
Both devices need to be online at the same time if you want to pair a device with the (3x4) 12-character code.<br />
Sync needs to be set up and working on at least one computer, so you can enter the 12-character code, provided by the device (computer) that you want to pair, in three fields to pair a device on the computer/device that has a working Sync setup.

10.1.3 cut/copy not working in code editor

Strange cut/copy behaviour in editor. When first started and editor is opened, the copy works ok then when code is added, the copy is displaced by the number of characters in the new addition (it seems).

Yes, intermittently it just stops working. The last time I shutdown jdeveloper and cleaned out all generated project and workspace artifacts (including the "history" elements) from the project and workspace folders. This seemed to fix it, at least for a time.
When this does happen I notice its specific to a workspace. I created another workspace without shutting down and cut/paste worked fine there. It might be as specific as a project, didn't test that (should have).
I'm having a more serious problem with the editor. Occasionally a "reformat" eats large chunks of code. The last time this happened there was a compile error in one method, which happened to be the first method in the file. "Reformatting" the file erased all code after that method.
And finally, the "rename" option on the refactoring menu disappeared for a time. Again, deleting all generated workspace and project artifacts fixed that.
Jim

CD/DVD drive does not work - error code 39 on Satellite A300

Good evening.
I've encountered a problem with my Satellite A300.
I can't get the disk drive to function.
Device manager says the driver is current. But also says it is corrupt "code 39".
I have tried downloading new drivers from Toshibas website but they all come up as code 39 unable to install. The first I noticed it was last night when I was installing Norton 360. I had the cd it worked once then nothing.
Has anyone ran across this before?
Any help would be greatly appreciated.

Hi
I had the same issue and I found a solution here in the forum.
The problem is that your Windows registry is muddled up.
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Secondly you have to start the registry and have to remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally reboot the notebook and test the CD/DVD drive again!
Bye

Disk Drive not working - Error Code 19

I have a recently purchased HP Pavilion Notebook, with Windows 8.1, and today my Disk Drive stopped working.
First up, I tried another disk to see if this was the issue; it also wouldn't work. Then I went into Device Manager and CDDVDW SU-208CB has a yellow exclaimation mark icon next to it. In the properties it says it has error 19, what do I do?
Another forum said to delete something in the registry, however, I'm not sure where I can find it, and what exactly to delete. Nor do I know how to reinstall the device.

Hi,
Please use the following methods/tips to fix:
http://support.microsoft.com/kb/314060/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Deskjet Ink Advantage 3525 - WiFi settings not working, error code 0XB808DE

Welcome all
When I enable and try to setup up a wireless connection with my printer a error message appears.
Error code is 0XB808DEDE (or capital o instead of zero in the beginnig)
When I turn off the wireless module printer function normally, priting only from USB connection.
I've try reset to the factory defaults settings and unplugging power cable for 60 seconds to hard reset the printer.
No ideas left.
My region is Europe - Poland.
Best wishes
Kamila

Welcome to the HP Community @Namilka ,
I understand you are noticing a "0x" error code on your Deskjet Ink Advantage 3520, and I wanted to reach out. Normally the error message means that the printer is experiencing an Ink System Failure, Printer Failure, or a failure with the printhead. As you have already tried resetting the printer and the error comes back, I would next recommend contacting HP directly at the information below to see about a replacement unit.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Group policy file copy not working: Error Code: 0x80070569 in GPResult

Hi All,
I am trying to copy files from network share location to computer c:\test\files folder using Computer Preference GPO. My gpresult giving error 0x80070569 (which means I think network path not found). I can browse network path from computer where
I am applying GPO. Is there specific source folder permission needed to able to resolve this issue.
thanks.
orion

> error 0x80070569 (which means I think network path not found)
Not really :)
# as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x569
# for hex 0x569 / decimal 1385 :
ERROR_LOGON_TYPE_NOT_GRANTED
winerror.h
# Logon failure: the user has not been granted the requested
# logon type at this computer.
# 1 matches found for "0x80070569"
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Satellite L30 - DVD player not working - error code 19

Mat****a dvd-ram UJ-850S ATA device
It has a problem and doesn't work, it shows this message in device manager:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I click check for solutions, it searches for a while and gives me nothing, just disappears.
How do I get it to work again?
Thanks

Hi,
Have you tried to remove Upper/lower filters? How to do it I took from Toshiba support:
*Follow these instructions for clearing the Upper/Lower Filters:*
Click on Start --> Run --> and type in 'regedit' followed by the enter key
Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
Expand the "SYSTEM" Key
Expand the "CurrentControlSet" Key
Expand the "Control" Key
Expand the "Class" Key
Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
High light this key by left clicking once on it
On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
Please exit the registry by clicking on the "X" in the top right hand corner of the screen
Reboot your computer

UNALLOCATED not working in CODA

Similar Messages

Maybe you are looking for