Unarchive ERROR- Customer [Business content]

Hi All,
I am trying to unarchive MDM Customer business content MDM 7.1 , am getting the following error:
' Archive has too many languages (18) for DBMS Platform limit of (17) for target repository : Customer"
$$$ xoperation ended in ERROR : ffab414fh : Error adding a language . You may have exceeded the maximum number allowed".
1. Is there any DBMS Platform limitations for adding languages?
please advise.
thanks,
Alexander.

Hi Alexander,
It seems like you are using IBM DB2 database.
In order to fix it, Please Check SAP Note: 1143932
Fixed: Language limitation on DB2 databases. Set parameter "IBMDB2 Use Long Varchar For Languages=True" in mds.ini file to activate the fix.
Also refer Similar thread with same issue:
Re: Remove languages for SRM-MDM Repository for archival
Regards,
Mandeep Saini

Similar Messages

Error In Business Content

Hi,
I am getting Errors in business content when Installing objects for Infocube. like
Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
etc.......
Please help me
Regds
Dave.

Hi,
Apply note :1009329
Re: Error while activating Infocubes (0SD_C03) from Business Content
Re: Info Objects & Data source not active.
With rgds,
Anil Kumar Sharma .P

Custom business content

Hello
I need to create custom business content in NW2004s (cubes and data store object for Siebel).
Does somebody know how to create custom business content in BW 3.5/ BI NW2004s?
Thanks

Transaction code: RSA1 > Info-provider > Create ODS/Infocube required.
if Siebel systems can give u flat files, with required format of data...you can upload in BW,
Hope this helps.
Monica

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Error installing business content update rules

Hi,
I'm trying to install the below updates rules from the business content
0PLANT$T 0PLANT_TEXT 53AFFWD74OI3CT3RDE3RI9THU
0PLANT 0PLANT_ATTR 5UZVD7UWYN4T81H24YBKGH6KY
I get the error
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Long Text:
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
System Response
The update rules cannot be activated.
Procedure
If error message :
is cut off, proceed as follows to get the complete complete error message:
Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
If I select the Display Activated Program it says does not exist.
Can anyone help me figure out this issue?
Thanks

We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT

Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
Is the request creation for a BEx transport is different from the normal request creation??
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description) : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1. On the Data Warehousing Workbench: Business Content screen:
a. At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b. At the top of the right hand frame, choose Collection mode and select collect automatically.
c. In the left hand frame, select Object Types.
d. In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2. In the Selection of Query Objects dialog box.
a. Select the following InfoObject catalog:
0CHANOTASSIGNED
b. Choose Transfer Selections.
c. If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d. If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3. At the top of the right frame, choose Install and select Install in Background.
4. In the Install Business Content in the Background dialog box choose Yes.
5. In the Information dialog box choose Continue.
6. Choose Exit.
please advise on how to continue.
thanks and regards

Error Installing Business Content InfoObject 0GN_VENDOR

Hi,
I installed 0GN_VENDOR from Business Content. It was not active after installing.
When I try to activate 0GN_VENDOR I receive the following error messages:
Attribute 0DBCTRYCOD from characteristic 0GN_VENDOR not (actively) available
Attribute 0DBGUDUNS from characteristic 0GN_VENDOR not (actively) available
I looked in Business Content and found that the the two attributes do not exist in Business Content. So I am unable to install to correct the 0GN_VENDOR issue. I also do not find any related OSS Notes on the Attributes.
What should I do to fix this? Just remove the offending Attributes and activate 0GN_VENDOR?

Hi Kenneth,
Check for the inactive info objects 0DBCTRYCOD and 0DBGUDUNS and try to install these IOs too along with the 0GN_VENDOR.
If you are not able to find them in Business content then it might the problem with the BI content version installed in your system.
Regards
KP

Error installing business content

Hi Experts,
i am getting an error while installing business content for sales and distribution.
i.e-The creation of the export DataSource failed,
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
could any body help.

Hi
The DS should be Activated at R/3 to Install the Business Content on BI side.
Recheck the same with the following
R/3
RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
BI Side
Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
Hope it helps and clear

Error in Business content Query

Hi,
we have activated the business content for General Ledger (New). We have successfully executed all data loads.
but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
Has anyone faced this issue before. could anyone help us to fix it?
Regards,
Sainath

Hi,
Please apply the note 1015402 to resolve this issue.
Best Regards
Manoj Kumar

Error During Business Content Query Activation- Very Urgent

Hi All,
I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
As per requirement i have to install New quries in the 0Pur_C01
0PUR_C01_Q0012 : Ordering Activities
0PUR_C01_Q0015 : Purchase Order Values
0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
0PUR_C01_Q0004 : Values Purchase Order Delivery Invoice
0PUR_C01_Q0023 : Total and Average Order Value
Out of these five quries i am unable to install 0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
element.
I am doing the same for query 0PUR_C01_Q0012 : Ordering Activities but getting error message
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
BEx transport request 'SBDK900497' is not available or not suitable
Regards
Premanshu Gupta

Hi,
To rectify this error,
BEx transport request 'SBDK900497' is not available or not suitable
Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
Assign points if it helps....

Errors in Business Content Activation

Hi,
The activation of 0MATERIAL with 'data flow before' as grouping is giving lot of errors like
'Mapping between 0CUSTOMER_TEXT DEV100 0CUSTOMER_TEXT is inconsistent'
Here DEV100 is source system name.
Recently we upgraded BC from 02 to 04. And we are at BW 3.1c .And I observed that.
In sp02 , master data is loaded by direct updating
in SP 04 ,master data is loaded by flexible.
Thank you in advance.
With rgds,
Anil

Hi Anil,
Can you try to simulate the activatation of 0material and 0customer infoobjects with "necessary objects" in the grouping. If you encounter errors try to do this one by one. and if you manage to activate both objects with this option, then try to active 0customer and 0material with the grouping "dataflow before" option.
If you still encounter errors, post those errors again. Hope this helps,
Sree

Business content

Hi all,
i have got some error in business content .
BW info object not to be assinged R/3 object so i cant do extraction from R3.
ex: InfoObject 0COMP_CODE, to be assigned to field BUKRS, is not active
pls anybody know let send me details.
Regards
venki

Hi,
Check in t.code RSD1 and give the infoobject name and activate it.
Cheers!
Amit

Errors activating HR Business Content: cube 0PA_C01, ODS 0PA_DS02, 0PA_DS02

Hello!!
we are installing a IDES BW system for customer demos, training and so on.
I am tying to activate all HR Business Content, and I began activating Personnel Administration.
Every time that I am trying to activate HR Business Contentt objects, the following error message appears:
Err.tmpo.ejec.         CALL_FUNCTION_CONFLICT_LENG
Excep.                   CX_SY_DYN_CALL_ILLEGAL_TYPE
Error in the ABAP Application Program
The current ABAP program "SAPLRSAOS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "OSOA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "RSA1_OLTPSOURCE_GET_ALL" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "I_T_OLTPSOURCE".
Although the currently specified field
" " is the correct type, its length is incorrect.
We have installed the following components:
SAP Netweaver 2004s:
SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
BI_CONT     703                     0008     SAPKIBIIP8     Business Intelligence Content
SAP ECC6.0:
SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
SAP_AP     700                     0012     SAPKNA7012     SAP Application Platform
LCAPPS     2005_700                     0006     SAPKIBHD06     LC Applications (LCAPPS) 2005_700
SAP_APPL     600     0012     SAPKH60012     Logísitica y Finanzas
EA-IPPE     400                     0012     SAPKGPID12     SAP iPPE
EA-APPL     600                     0012     SAPKGPAD12     SAP R/3 Enterprise Extension PLM, SCM, Finanzas
EA-DFPS     600                     0012     SAPKGPDD12     SAP R/3 Enterprise Extension Fuerzas de defensa y
EA-FINSERV     600     0012     SAPKGPFD12     SAP R/3 Enterprise Extension Financial Services
EA-GLTRADE     600     0012     SAPKGPGD12     SAP R/3 Enterprise Extension Global Trade
EA-HR     600                     0028     SAPKGPHD28     SAP R/3 Enterprise Extension HR
EA-PS     600                     0012     SAPKGPPD12     SAP R/3 Enterprise Extension Administración pública
EA-RETAIL     600     0012     SAPKGPRD12     SAP R/3 Enterprise Extension Retail
FINBASIS     600                     0012     SAPK-60012INFINBASIS     Fin. Basis
FI-CAX     600                     0012     SAPK-60012INFICAX     FI-CA Extended
INSURANCE     600     0012     SAPK-60012ININSURANC     SAP Insurance
IS-CWM     600                     0012     SAPK-60012INISCWM     Industry Solution Catch Weight Management
IS-H     600                     0013     SAPK-60013INISH     SAP Healthcare
IS-M     600                     0012     SAPK-60012INISM     SAP MEDIA
IS-OIL     600                     0011     SAPK-60011INISOIL     IS-OIL
IS-PS-CA     600                     0012     SAPK-60012INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT     600                     0012     SAPK-60012INISUT     SAP Utilities/Telecommunication
LSOFE     600                     0012     SAPK-60012INLSOFE     SAP Learning Solution Front-End
SEM-BW     600                     0012     SAPKGS6012     SEM-BW: Strategic Enterprise Management
SLL-LEG     7.00                     0006     SAPK-70006INSAPSLL     SLL-LEG 700 : Add-On Supplement
WFMCORE     200     0012     SAPK-20012INWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (D
CPRXRPM     400                     0012     SAPK-40012INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ECC-DIMP     600                     0012     SAPK-60012INECCDIMP     DIMP
ERECRUIT     600     0012     SAPK-60012INERECRUIT     E-Recruiting
FI-CA     600                     0012     SAPK-60012INFICA     FI-CA
MRSS     600                     0000          -     Multi Resource Service Scheduling
ST-A/PI     01G_ECC600     0000          -     Application Servicetools for ECC 600
AIN     400                     0005     SAPK-40005INAIN     AIN 400 : Add-On Supplement
XFT     210_700                     0000          -     xft business add-on
So, can everybody help me? Do we need any component more in BW or SAP ECC? How can we solve this problem?
Thanks in advanced for your help.
Best regards,
Seshen

Hi Sam,
Please check whether datasources are installed and active in the source system.
For remote activation you need role SAP_RO_BCTRA or authorization object S_RO_BCTRA in your profile.
If not active, you can activate via RSA5.
Afterwards, install the transfer rules again.
If you are lower than SPS8, check note 929935.
Hope this helps,
regards,
Olav

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Unarchive ERROR- Customer [Business content]

Similar Messages

Maybe you are looking for