#Unavailable Error while calculating sum

Hi Experts,
I have an issue like ,if i apply hyperlink for a dimension,all the measures changes into #UNAVAILABLE ,so i converted measures into string to get rid of that error,but i need to calculate sum of those measures,where again iam facing the #UNAVAILABLE error .
#UNAVAILABLE appears when Web Intelligence cannot calculate the valueof a smart measure.This situation occurs when Web Intelligence cannot display the values in afiltered smart measure without applying a filter to the query. Because thiscarries a risk of impacting other reports based on the same query, WebIntelligence does not apply the query filter.
Iam not using Universe to convert smart measures into normal measures
I tried to use tonumber to convert string to a number ,but it displays #Error =ToNumber(Replace([StringObject];",";""))
Please help out!!!
Please find the screenshot attached.
iam using BO 4.0 SP6, Using BW as backend.

Please refer to the link below -
http://scn.sap.com/thread/3576308

Similar Messages

Error while calculating the net present value

Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.

Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.

Error while calculating variances for production order

Hi Gurus,
while calculating variances for production order i am getting the following error
"Cannot calculate scrap variances" ( Error message)
" no standard value estimate for material" (Warning message"
A standard cost estimate exists for the material at the date mentioned in the error in released status.
Please give solution for the error.
Thanks in advance n Regards
Arul.

Is there an <b>itemization</b>, generated for the cost estimate used to calculate the target costs?
Does the material components listed in the BOM of the cost estimate used to calculate the target costs, <b>assigned to the operations</b> in which they are used. Otherwise it is not possible to correctly report the variances and scrap when operations are confirmed.
Does the order for which the variances are calculated have a valid <b>variance key.</b> ?
Does the order have the status DLV (delivered) or TECO (technically completed). If the status was withdrawn, any variances and <b>scrap variances are canceled</b>.

Selection Failure error while using SUM expression - 11g

Hi,
I am using following expression to calculate SUM of child node values. It works in 10G, but errors our in 11g.
Anyone has any workaround?
Expression:
<copy>
<from expression="sum(bpws:getVariableData('Invoke_ebs_get_order_data_ebs_get_order_dataSelect_OutputVariable','XwCoiwsOrderHeadersVCollection','/ns4:XwCoiwsOrderHeadersVCollection/ns4:XwCoiwsOrderHeadersV/ns4:xwCoiwsOrderLinesVCollection/ns4:XwCoiwsOrderLinesV/ns4:orderedQuantity'))"/>
<to variable="p_total_ordered_qty"/>
</copy>
Error Message:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
Thanks,
Naveen
Edited by: Leon Z on Feb 9, 2010 2:21 AM

Gaurav,
It didn't work.
No Compilation error but failed while executing in EM.
Invalid XPath expression. an error occurs while parsing XPath expression sum('Invoke_ebs_get_order_data_ebs_get_order_dataSelect_OutputVariable','XwCoiwsOrderHeadersVCollection','/ns4:XwCoiwsOrderHeadersVCollection/ns4:XwCoiwsOrderHeadersV/ns4:xwCoiwsOrderLinesVCollection/ns4:XwCoiwsOrderLinesV/ns4:orderedQuantity'). The XPath expression was invalid; the reason was: Parse Error in sum function.. Check the detailed root cause described in the exception message text and verify that the XPath expression named in the error message is correct. The XPath expression is defined in the BPEL process. }

Mprotect failed: Resource temporarily unavailable error while starting JVM

Hi All,
I am using JDK 1.6.0_21 in sunos on sparc server.
JDK_
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Server VM (build 17.0-b17, mixed mode)
OS and Hardware config_
SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,SPARC-Enterprise.
while starting the JVM getting the mprotect error as shown below:
*# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*# An error report file with more information is saved as:*
*# /progs/spider/runtime/testtool/hs_err_pid11769.log*
*# If you would like to submit a bug report, please visit:*
*# http://java.sun.com/webapps/bugreport/crash.jsp*
*11769 Abort - core dumped*
dl failure on line 685Error: failed /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so, because ld.so.1: java: fatal: /usr/jdk/instanes/jdk1.6.0/jre/lib/sparc/server/libjvm.so: mprotect failed: Resource temporarily unavailable
Complete error written to */progs/spider/runtime/testtool/hs_err_pid11769.log*.
*# A fatal error has been detected by the Java Runtime Environment:*
*# SIGSEGV (0xb) at pc=0xfe56af10, pid=11769, tid=5*
*# JRE version: 6.0_35-b10*
*# Java VM: Java HotSpot(TM) Server VM (20.10-b01 mixed mode solaris-sparc )*
*# Problematic frame:*
*# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*# If you would like to submit a bug report, please visit:*
*# http://java.sun.com/webapps/bugreport/crash.jsp*
--------------- T H R E A D ---------------
*Current thread (0x000e1400): VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xf24ff724
Registers:
G1=0x000504b8 G2=0xfc004fc0 G3=0xfc00d6ac G4=0xfc031fc0
G5=0x0002d000 G6=0x00000000 G7=0xfe3c1a00 Y=0x00000000
O0=0xd757f5f0 O1=0xf24ff720 O2=0xfee237bc O3=0x0000ffff
O4=0x0000fc00 O5=0xfc004f88 O6=0xd757f4b8 O7=0xfe8b978c
L0=0x00041400 L1=0xfee375e8 L2=0x04000000 L3=0x00041400
L4=0x000415f0 L5=0x00041400 L6=0x000415e8 L7=0x01000000
I0=0xd757f5f0 I1=0xfee2fa94 I2=0xfedf6000 I3=0x00039a94
I4=0x0053c690 I5=0xf24ff720 I6=0xd757f518 I7=0xfe5d6b58
PC=0xfe56af10 nPC=0xfe56af14
Top of Stack: (sp=0xd757f4b8)
*0xd757f4b8: 00041400 fee375e8 04000000 00041400*
*0xd757f4c8: 000415f0 00041400 000415e8 01000000*
*0xd757f4d8: d757f5f0 fee2fa94 fedf6000 00039a94*
*0xd757f4e8: 0053c690 f24ff720 d757f518 fe5d6b58*
*0xd757f4f8: 00000000 00000000 f1b78050 00000003*
*0xd757f508: 000d0374 fffffffd 00000000 000ad1f8*
*0xd757f518: 00000000 fc004f88 fc00d6ac f24ff720*
*0xd757f528: 00000000 00704518 00000003 d757f830*
Instructions: (pc=0xfe56af10)
*0xfe56aef0: e6 26 24 50 81 c7 e0 08 81 e8 20 00 9d e3 bf a0*
*0xfe56af00: fa 06 20 00 19 00 00 3f 90 10 00 18 96 03 23 ff*
*0xfe56af10: f2 07 60 04 9f 3e 60 00 94 22 c0 0f b9 33 f0 3f*
*0xfe56af20: b7 32 b0 3f b0 1f 20 01 b4 1e e0 01 ae 0e 00 1a*
Register to memory mapping:
G1=0x000504b8 is an unknown value
G2=0xfc004fc0 is pointing into interpreter code (not bytecode specific)
G3=0xfc00d6ac is an Interpreter codelet
method entry point (kind = native) [0xfc00d560, 0xfc00d8e0] 896 bytes
G4=0xfc031fc0 is an unknown value
G5=0x0002d000 is an unknown value
G6=0x00000000 is an unknown value
G7=0xfe3c1a00 is an unknown value
O0=0xd757f5f0 is an unknown value
O1=0xf24ff720 is an unallocated location in the heap
O2=0xfee237bc: +0x2cc3c in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
O3=0x0000ffff is an unknown value
O4=0x0000fc00 is an unknown value
*O5=0xfc004f88 [CodeBlob (0xfc004f88)]*
Framesize: 0
BufferBlob (0xfc004f88) used for Interpreter
O6=0xd757f4b8 is an unknown value
O7=0xfe8b978c: AsyncGetCallTrace+0x96fc in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
L0=0x00041400 is an unknown value
L1=0xfee375e8: +0x40a68 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
L2=0x04000000 is an unknown value
L3=0x00041400 is an unknown value
L4=0x000415f0 is an unknown value
L5=0x00041400 is an unknown value
L6=0x000415e8 is an unknown value
L7=0x01000000 is an unknown value
I0=0xd757f5f0 is an unknown value
I1=0xfee2fa94: +0x38f14 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
*I2=0xfedf6000: GLOBALOFFSET_TABLE_+0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000*
I3=0x00039a94 is an unknown value
I4=0x0053c690 is an unknown value
I5=0xf24ff720 is an unallocated location in the heap
I6=0xd757f518 is an unknown value
I7=0xfe5d6b58: JVM_GetClassLoader+0x3ec0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
Stack: [0xd7500000,0xd7580000], sp=0xd757f4b8, free space=509k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
*V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
*V [libjvm.so+0x1d6b60] void frame::gc_prologue()+0x20*
*V [libjvm.so+0x2241e4] void Threads::gc_prologue()+0xd0*
*V [libjvm.so+0x7c62c8] void PSMarkSweep::invoke_no_policy(bool)+0x52c*
*V [libjvm.so+0x7c5d78] void PSMarkSweep::invoke(bool)+0x8c*
*V [libjvm.so+0x225264] void VM_ParallelGCSystemGC::doit()+0xc4*
*V [libjvm.so+0x1f0018] void VM_Operation::evaluate()+0x88*
*V [libjvm.so+0x8ce23c] void VMThread::evaluate_operation(VM_Operation*)+0xd4*
*V [libjvm.so+0x8ce784] void VMThread::loop()+0x414*
*V [libjvm.so+0x267010] void VMThread::run()+0xa0*
*V [libjvm.so+0x791a18] java_start+0x158*
VM_Operation (0xf24ff5b0):
*[error occurred during error reporting (printing VM operation), id 0xb]*
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
*0x00704400 JavaThread "GC Daemon" daemon [_thread_blocked, id=20, stack(0xf2480000,0xf2500000)]*
*0x00716400 JavaThread "RMI Reaper" [_thread_blocked, id=19, stack(0xf2580000,0xf2600000)]*
*0x0070fc00 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=18, stack(0xf2680000,0xf2700000)]*
*0x00100800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11, stack(0xd6f00000,0xd6f80000)]*
*0x000fe000 JavaThread "C2 CompilerThread1" daemon [_thread_blocked, id=10, stack(0xd7000000,0xd7080000)]*
*0x000fb800 JavaThread "C2 CompilerThread0" daemon [_thread_blocked, id=9, stack(0xd7100000,0xd7180000)]*
*0x000fa000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=8, stack(0xd7200000,0xd7280000)]*
*0x000e6c00 JavaThread "Finalizer" daemon [_thread_blocked, id=7, stack(0xd7300000,0xd7380000)]*
*0x000e5400 JavaThread "Reference Handler" daemon [_thread_blocked, id=6, stack(0xd7400000,0xd7480000)]*
*0x00032000 JavaThread "main" [_thread_blocked, id=2, stack(0xfe300000,0xfe380000)]*
Other Threads:
*=>0x000e1400 VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
*0x00113400 WatcherThread [stack: 0xd6e00000,0xd6e80000] [id=12]*
VM state:at safepoint (normal execution)
*VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])*
*[0x00031330] Threads_lock - owner thread: 0x000e1400*
*[0x00031740] Heap_lock - owner thread: 0x00704400*
Heap
PSYoungGen      total 10752K, used 1008K [0xf1000000, 0xf1c00000, 0xfbc00000)
eden space 9216K, 0% used [0xf1000000,0xf1000000,0xf1900000)
from space 1536K, 65% used [0xf1a80000,0xf1b7c050,0xf1c00000)
to   space 1536K, 0% used [0xf1900000,0xf1900000,0xf1a80000)
PSOldGen        total 24576K, used 0K [0xdb800000, 0xdd000000, 0xf1000000)
object space 24576K, 0% used [0xdb800000,0xdb800000,0xdd000000)
PSPermGen       total 16384K, used 7578K [0xd7800000, 0xd8800000, 0xdb800000)
object space 16384K, 46% used [0xd7800000,0xd7f669c8,0xd8800000)
Code Cache [0xfc000000, 0xfc400000, 0xfe000000)
total_blobs=188 nmethods=49 adapters=95 free_code_cache=33095232 largest_free_block=26368
Dynamic libraries:
*0x00010000 /usr/jdk/instances/jdk1.6.0/jre/bin/java*
*0xff3a0000 /usr/lib/lwp/libthread.so.1*
*0xff370000 /usr/jdk/instances/jdk1.6.0/jre/bin/../lib/sparc/jli/libjli.so*
*0xff350000 /lib/libdl.so.1*
*0xff200000 /lib/libc.so.1*
*0xff390000 /platform/SUNW,SPARC-Enterprise/lib/libc_psr.so.1*
*0xfe400000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so*
*0xff1d0000 /lib/libsocket.so.1*
*0xff1f0000 /usr/lib/libsched.so.1*
*0xff1b0000 /lib/libm.so.1*
*0xff180000 /usr/lib/libCrun.so.1*
*0xff160000 /lib/libdoor.so.1*
*0xff120000 /usr/lib/libdemangle.so.1*
*0xff100000 /lib/libkstat.so.1*
*0xff000000 /lib/libnsl.so.1*
*0xfef00000 /lib/libm.so.2*
*0xff0c0000 /lib/libscf.so.1*
*0xfefe0000 /lib/libuutil.so.1*
*0xfeee0000 /lib/libgen.so.1*
*0xfeeb0000 /lib/libmd.so.1*
*0xfee90000 /lib/libmp.so.2*
*0xfe390000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libverify.so*
*0xfe2c0000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libjava.so*
*0xfe280000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libzip.so*
*0xfe260000 /usr/lib/locale/no_NO.ISO8859-1@bokmal/[email protected]*
*0xfbfc0000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so*
*0xfbe60000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcmq.so*
*0xfbe30000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcm.so*
*0xfbe10000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvft.so*
*0xd6d80000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrv.so*
*0xfbfe0000 /lib/libpthread.so.1*
*0xfbd40000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libmanagement.so*
*0xfbd10000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libj2pkcs11.so*
*0xfbc40000 /usr/lib/libpkcs11.so*
*0xfbc20000 /usr/lib/libcryptoutil.so.1*
*0xf27a0000 /usr/lib/security/pkcs11_softtoken.so*
*0xf2770000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libnet.so*
VM Arguments:
jvm_args: -Dlog.dir=/data/flowlogs/testtool -Djava.rmi.server.codebase=file:///progs/spider/flow_home/Output/java/classes/ -Djava.security.policy=/progs/spider/flow_home/config/flow2/props/java.policy -Dproperty_file=testtool.properties -Dtestdata=/progs/spider/flow_home/test/framework/testtool
java_command: flow.framework.componentserver.Server
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=/usr/jdk/jdk1.6.0_35
PATH=/progs/spider/flow_home/bin:/progs/spider/flow_home/ant/bin:/usr/jdk/jdk1.6.0_35/bin:/usr/jdk/jdk1.6.0_35/jre/bin:/usr/bin:/usr/local/bin:/progs/spider/TIBCO/tibrv/8.3/bin:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/bin
LD_LIBRARY_PATH=/usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.6.0/jre/lib/sparc:/usr/jdk/instances/jdk1.6.0/jre/../lib/sparc::/usr/lib/lwp:/progs/spider/TIBCO/inconcert/icapps/shared/native/lib:/progs/spider/TIBCO/tibrv/8.3/lib:/progs/spider/flow_home/lib/tibco:/progs/spider/TIBCO/inconcert/icapps/icjava/lib:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/lib:/progs/spider/TIBCO/tibrv/8.3/lib
SHELL=/bin/bash
Signal Handlers:
*SIGSEGV: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGBUS: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGFPE: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGXFSZ: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
*SIGILL: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGQUIT: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
*SIGHUP: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
*SIGTERM: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
*SIG39: [libjvm.so+0x7976b8], sa_mask[0]=0x00000000, sa_flags=0x00000008*
*SIG40: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
--------------- S Y S T E M ---------------
OS:                      Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
uname:SunOS 5.10 Generic_142900-11 sun4u (T2 libthread)
rlimit: STACK 8192k, CORE 0k, NOFILE 65536, AS infinity
load average:0,82 0,83 0,60
CPU:total 2 has_v8, has_v9, popc, has_vis1, has_vis2, is_ultra3, is_sparc64
Memory: 8k page, physical 2097152k(0k free)
vm_info: Java HotSpot(TM) Server VM (20.10-b01) for solaris-sparc JRE (1.6.0_35-b10), built on Aug 28 2012 15:42:48 by "" with Workshop 5.8
time: Thu Jun 6 07:45:16 2013
elapsed time: 6 seconds
Can any one help me what is happening.
Regards,
Satya Krishna Y
Edited by: 1010262 on 06.jun.2013 07:55
Edited by: 1010262 on 06.jun.2013 07:56

> *# SIGSEGV
Common cause is JNI
> /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so
Looks like a non-standard library so it suggests JNI is in use

503 Service unavailable error while creating a web application

Hello,
i ve just installed VS .NET 2003 & .net Connector 2.0.
i get the following error when creating a web project:
'http://localhost/webapplication1', HTTP/1.0 503 Service unavailable.
Have any of you faced this problem ?
Thanks,
Jamal

Hello,
thanks for the answer.
No i didn't try to create a web projet before installing NCo.
I ran C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_regiis.exe but doesn't help.
I didn't have NCo 1.x installed before !
any other help ?
Thanks,

"Software currently unavailable" error while installing printer

I have a Brother MFC-465CN multifunction printer that I used as a standalone USB printer for over a year from my 27" Mac. I recently connected it to my router (printer is networkable) so that I can share with my windows 7 PC. I am easily able to print from my Windows PC. My Mac recognizes the network printer correctly System Preferences, Print&Fax, + to add Printer) - Shows Printer Name and Kind as "Bonjour" - even tells me that my selected printer software is available from Apple. When I try installing I get an error message saying "The software is currently unavailable" - Any ideas? The most frustrating part is that I am not even able to install the printer as a USB printer anymore - I get the same error.

The drivers and utilities on the CD-ROM for Mac OS® X 10.5 or earlier bundled with your Brother machine are NOTcompatible with Mac OS® X 10.6.
Download the correct printer driver here:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc465cnall&type2=all&type3=79&os=94&flang=all&dlid=
I think you also need a current driver for the Scanner:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc465cnall&type2=all&type3=20&os=94&flang=all&dlid=

Server is unavailable error while resetting password

I am trying to reset a password on my MAC Machine but i am getting an error saying "Server is Unavailable" when i click change password. What could be the reason?

I am able to edit the user account from debug window and admin screen. That uis I can make changes to user name, id, facility and so on. But cannot make any changes to the induvidually assigned resources.
I also checked the resource info for the user xml. I am not able to find anything unusual there. Will reprovisioning all resources work? Or will I have to delete the user account and create it again?

Error in Calculating Sum in Formula Row

Hi,
I have three ROWS . Each row has a selection like (@DESCENDANT"DIMENSION MEMBER") . In Columns i have period dimension. I want to see the SUM of All the values of the three rows. I tried putting sum function but output is not obtained. Now i have done Auto-Calculation for each row, But still my purpose is not solved.
Please let me know the possible solution for this.
Thanks

Hi
Verify the project revenue method is EVENT, and not COST.
Check the project type and the project itself to verify the original Oracle delivered billing extension is not assigned to the project as well.
Dina

BW ERROR while calculating local formula in Bex analyzer

Hi gurus,
Their is an error comming up on a report which is opened in Bex Analyzer. When we create local formula i encounter this error.
It says"
"Program error in class SAPMYSS1S method :uncaught exception "
"System error in program SAPLRRK0 and form DELETE_FST-01"
Not sure of why this error is comming up.
DO we need to update a OSS note for this.
Please suggest .
Regards,
Balaji Raj

Search SCN & Marketplace.

Error while calculating SPS for NW 7.3 Enterprise Portal

Hello,
I have a Solution Manager 7.01 SPS 28 (ST     400     0028     SAPKITL438     SAP Solution Manager Tool)
I want to download via MOPZ the newest SPS for NW 7.3 with Enterprise Portal.
I configured the SLD on the NW 7.3 side successfully.
The NW 7.3 transmitted the data to the SMSY.
I can create the system also successfully in the "Product Systems" and "Technical Systems"
and also created successfully the "Logical Components" and can assign to a "Solution"
When I try to calculate the SPS automatically for the NW 7.3 Enterprise Portal, the following
error Messages appears.
System P73: Installed Product Instance SAP NETWEAVER 7.3 Process Integration not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 PDF Export not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Advanced Adapter Engine Extnd not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Demo Applications not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 BPM not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 NWDS Update Site JEE not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Composition Platform not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Guided Procedures not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Enterprise Services Repository not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Composite App. Framework not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 AS Java Extensions not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 PI Adapter Engine (Java EE) not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 EP Core - Application Portal not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Composition Voice not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Central Process Scheduling not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Mobile not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 BI Java not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Business Intelligence not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 PI Partner Connectivity Kit not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Development Infrastructure not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Adobe Document Services not assigned! Display Help
System P73: Installed Product Instance SAP NETWEAVER 7.3 Application Server ABAP not assigned! Display Help
Can anybody please help me ?
Best regards
Alex

Hello Alexander,
I was having a similar problem, but only with the abap-related NW 7.3 components.
Please check the following note: Note 1595918 - JSPM: Validation fails due to mismatch at software features
   Do a backup of your BC_SL_SWFEATURE, delete those components you don't have, according to the usage types you have installed.
   In the portal, go to NWA -> Configuration -> Infrastructure -> SLD Data Supplier Configuration and click "Send and Collect Data".
Verify that the data is refreshed in your SLD.
In the SMSY, unassign the system from all the logical systems, delete the system, delete the technical java component and run the Setup System Landscape to create the system from your SLD.
After the system is generated, assign it to your Logical Component and try again.
   Or, instead of deleting / creating the system, maybe you can just refresh it using the steps from the note Note 1468559 - SMSY: Single system update from SLD
Regards

Error while calculating download files automatically

Hello All,
I have configured Maintenance Optimizer for Solution Manager 7.0 Ehp1. When i created a new Maintenance Transaction, it is displaying an error "System is not assigned to a host, There are no operating system/database-dependent files for your selection." after choosing the stack level.
Can anyone say what might be the problem?
Thanks,
Regards,
Hasan

Hi
as per the workarround this error got resolved after the proper maintaining Java technical system details for Java product instance and the port details.
hence please check and enter the dispatcher, port number, & database schema on the Header tab, and the J2EE-Server on the Instances tab,
check the sap notes
Note 1176842 - Maintenance optimizer reports missing host assignment
Note 1121045 - Missing host assignment in Maintenance Optimizer
and the thread
[MOPZ - System is not assigned to a host|MOPZ - System is not assigned to a host]
Thanks,
Jansi

Error while creating process order

Hi,
While creating a process order I am getting an error.
The error is :
Error while calculating costs for order xxxxxxx.
how to solve this?

Dear,
please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
There it will show the error tht occured during costing
Please refer this thread,
Cost error when saving production oredr
Regards,
R.Brahmankar

SAP HANA: Error while activating Graphical Calculation Views

Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.

Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

#Unavailable Error while calculating sum

Similar Messages

Maybe you are looking for