"unavailable" error

The "activity you're trying to do is unavailable" error is now almost 24 hours old.  portraying this as an "upgrade to our system" is complete hogwash.  that they've been the victim of a cyber attack is fairly obvious now....how long (if ever) will it be until they admit it?

I doubt they ever will. I had not considered this until I read it in another post and it makes complete sense that it be a cyber attack.

Similar Messages

  • I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

    Here is a ticket regarding our current client web application (  Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
    503 error occurs. 
    . Below is a conversation with Host Server support assistant.Can you take a look at it? 
    Ben (support) - Hi 
    Customer - We're having an issue with our windows host 
    Ben (support) - What's the issue? 
    Customer - 503 errors 
    Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error? 
    Customer - no, it comes and goes without any change Customer - could you have access to any logs ? 
    Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections 
    Ben (support) - You can review more about this at the link \ 
    Customer - probably yes - how can we troubleshoot ? 
    Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once 
    Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner 
    Customer - we're low traffic, this is an image DB to show our product details to our customers 
    Customer - ahhhh, so we could have straying sessions ? 
    Ben (support) - Correct Customer - any way you could check if it's the case ? 
    Customer - because it was working previously 
    Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay. 
    Customer - so our 2/3 max concurrent users can max out the 200 sessions 
    Customer - correct ? 
    Customer - is there a timeout ? 
    Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
    do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine 
    Customer - thank you so much 
    Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months 
    Customer - any changes from your side ? lowering of the value maybe ? 
    Customer - I'm trying to understand what I can report as a significant change 
    Ben (support) - We haven't touched that limit in years 
    Ben (support) - This could just be more users to your site than normal or even more images 
    Customer - I was thinking that could be it indeed 
    Customer - so I need to research how to quickly close connections when not needed 
    Ben (support) - Correctly 
    Ben (support) - correct 
    Customer - thanks !! 
    Ben (support) - Your welcome 
     Analysis : 
     The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors. 
     From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks. 
    Cheers, 
    Customer

    Hi Md,
    Thank you for posting in the MSDN forum.
    >>
    I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
    Since
    Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
    To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
    If yes, I suggest you could post the issue directly on
    ASP.NET forum, it would better support your issue.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

    Hi,
    We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
    cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
    Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
    /Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
    I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
    Thank you,
    Craig

    Please verify IIS
    settings:
    ======================
    On Exchange CAS
    server, open IIS console,
    Go to default web site, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click Autodiscover, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click EWS, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click OAB, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Please run IISRESET command to load the changes.
    Thanks.
    Tony Chen
    TechNet Community Support

  • Portlet unavailable error in Webcenter application

    I have developed a portlet application by using wsrp standand-based java portlet in the windows environment. There is no problem when I deployed the application to the preconfigured webcenter oc4j in JDeveloper 10.1.3.3.0.
    But when I deployed it to the webcenter suite which is also installed in the windows, I have got portlet unavailable error.
    I have already used the predeployment tools to change the portlet url endpoint so that it points to the webcenter portlet producers.
    <!--Unable to get portlet response (Internal Error) for portlet binding ParameterFormPortlet1_1oracle.portlet.client.container.PortletRemoteException: oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.wsrp.v2.InvalidRegistrationException: oracle.portlet.wsrp.v2.soap.InvalidRegistration
         at oracle.portlet.client.techimpl.wsrp.WSRPBaseTerminalPipe.processException(WSRPBaseTerminalPipe.java:37)
         at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:192)
         at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.pre(WSRPGetMarkupPipe.java:55)
         at oracle.portlet.client.service.pipeline.PipeContext.internalExecute2(PipeContext.java:519)
         at oracle.portlet.client.service.pipeline.PipeContext.internalExecute(PipeContext.java:406)
         at oracle.portlet.client.service.pipeline.PipeContextRunnable.run(PipeContextRunnable.java:23)
         at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:431)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:398)
         at oracle.portlet.client.service.pipeline.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:423)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: oracle.portlet.server.container.InvalidRegistrationException: oracle.portlet.wsrp.v2.InvalidRegistrationException: oracle.portlet.wsrp.v2.soap.InvalidRegistration
         at oracle.portlet.wsrp.v2.ServerToWSRPv2.getMarkup(ServerToWSRPv2.java:13574)
         at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.getMarkup(ActivityServerWrapper.java:1382)
         at oracle.portlet.client.techimpl.wsrp.WSRPGetMarkupPipe.execute(WSRPGetMarkupPipe.java:119)

    Have you tried deploying the portlet to the application server, consume this portlet producer in your development environment (JDeveloper), and deploy the application without re-wiring the portlet producer connection?
    This approach may take us closer to the problem.
    Also, a full stack trace would be helpful too.
    Peter

  • Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

    Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
    VM: Windows Server 2012 R2 with installed Active Directory Domain Services
    When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

    Hello Aleksandr,
    There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
    More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
    a multihomed domain controller.
    Active Directory communication fails on multihomed domain controllers
    http://support.microsoft.com/kb/272294/
    Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
    configure a DC with registry mods:
    http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
    7 Reasons not to Make Hyper-V a Domain Controller
    http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
    Domain Controller as Hyper-V host
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
    Networking?
    I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
    the host OS ping/communicate with the DC virtual machine?
    If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
    Hyper-V Server VLAN Network Configuration
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv 
    Recommendation:
    Why not just create another VM DC?
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • HTTP 503 Service Unavailable Error in SAP XI 3.0

    Hi All,
       I am doing a simple File -> File scenario which picks up a .txt file from a folder and post it to the same folder .My file is getting picked up.But I am getting an error
    <SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable Error when sending by HTTP (error code: 503, error text: Service Unavailable)</SAP:Stack>
    I have done a cache refresh to resolve this error. But then my error is MAPPING PROGRAM NOT FOUND.When I retry I am getting the HTTP 503 error.
      Please suggest any solution for the same .
    Thanks,
    Tiny

    Look similar thread to resolve your problem
    Error in Call Adapter (IDOC->XI->FILE)
    XI Server Malfunction:Error in Receiver Adapter
    Http* Errors in XI
    Please can you look at note: 803145
    Error : HTTP_RESP_STATUS_CODE_NOT_OK - 503 Service Unavailable
    HTTP_RES_STATUS_CODE_NOT_OK,503 error

  • Frustrated by Error 503--Service Unavailable Error

    I am currently being frustrated by a Error 503--Service Unavailable error. I have worked with WL 8.x for a couple of years but just set up my first WL 9.x server. I cannot find anything in the logs and am at a loss as to how to proceed. I am not sure if the problem is with my WAR file or with the server configuration. Any help would be GREATLY appreciated.

    I am having the exact same error. Any solutions yet???
    Error is:
    Error 503--Service Unavailable
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.4 503 Service Unavailable
    The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.

  • My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

    My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

    Hi Pebbles2313,
    It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
    OS X: Printer and scanner software available for download - Apple Support
    http://support.apple.com/en-is/HT201465
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

    My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

    Try downloading the driver directly from Canon's web site.

  • "Resource Unavailable" error when trying to download a file.

    We're running the latest version of OS:X - 10.4.3 (recently upgraded from 10.3.9) and I've found that with the latest version of Safari we can no longer download files off certain websites of ours. Typically we have a link off a page which spawns a javascript window, which then contains the download link. When trying to "Download Linked File" to our desktop we get a "resource unavailable" error in the Downloads window.
    Oddly enough it doesn't affect all of Tiger installations. We noticed that those machines that were formatted first, then had Tiger installed did not have this problem, only the machines we upgraded from 10.3.9. I've tried re-installing the 10.4.3 combo updater to no avail. And JFYI, Firefox works without a hitch, but my fear is that we're going to run into problems where some of our clients are unable to grab files they require.
    Unfortunately, I cannot provide a link as they are to client files but I can try to provide any additional information needed to get to the bottom of this...
    Thanks,
    MJX.
    G4   Mac OS X (10.4.3)  

    Reworked some of the javascript for our webserver and fixed the problem.

  • #UNAVAILABLE Error in WEBI 4.1 SP3

    Hi All,
    I am facing this issue with the web intelligence report created over a BEx query using a BICs connection. The report layout is attached. I have a structure object from BEx in my report. I need to show many crosstab blocks filtered by a different selection of customers. All my measures except for the TLC% and TLC per KG have the type SUM. These two are Delegated. The moment I apply a filter on customers and select more than one customer I get a #UNAVAILABLE error for these two measures. I thought this issue has been resolved in BI 4.1 SP3.
    How can I resolve it?
    Thank you
    Best regards,
    Tanisha

    Hi Tanisha,
    that is normal & works as designed.
    Maybe following thread will help you understand the background:
    Block-Level Filters on Measure-Variables containing BICS-Smart-Measures Error
    There was an improvement around this message & contexts in BI 4.1 SP3, but this is not your case (you are not getting this message when using contexts).
    Your alternatives:
    Use prompts instead of report filters.
    Calculate those two key figures in the front end, instead of in the bex query.
    Best regards,
    Victor

  • "Service Unavailable" error is unidentified

    Am I the only one bothered by the lack of application identity on the "Service Unavailable" error box?
    This pops up infrequently enough that I can never remember which application is putting it up. Would it be so hard to title it "Oracle Calendar Service Unavailable" instead of just "Service Unavailable"?
    Thanks for listening.
    Mr.Mike

    Export an h.264 master file and use the YT uploader to see whether you have the same problem.
    Russ

  • Podcast download automatically but still get "temporarily unavailable" errors

    I've set up my podcasts to download automatically. Yet, someone even when I play one which has obviously already downloaded, after a few minutes playback will halt with a "temporarily unavailable" error. Any idea what is causing this??
    P.

    Hi Senile24,
    Thanks for visiting Apple Support Communities.
    I recommend the troubleshooting steps in this article if you continue to see the "service is temporarily unavailable" message:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Best,
    Jeremy

  • 3x Crash Service unavailable Error

    I'm experiencing an Error that seems to concern quite a lot of user, but no real fix seems to appear. Compressor used to work fine once, but now every encode fails (tried a variety of different settings) and gives the ominous 3x Crash Service unavailable Error. The Batch Log displays 'service-unavailable' messages. It may be due to a Leopard Update, due to HP Printer software or even Flip4Mac, i couldnt say which. All safe mode/ permission reset, Compressor and Qmaster Reinstalls failed me up to now, so maybe anyone has some pointer as to what I'm missing...
    Thanks!

    Not sure if this will help, but I had this problem, I solved it by removing Perian (the lovely app that allows Quicktime to play almost any file).
    Once working I've reinstalled Perian and everything is fine.

  • Cannot activate my iphone 3gs...server unavailable error

    cannot activate my iphone 3gs...server unavailable error...when will server be available?

    Was your phone ever locked to a different phone carrier than the one your on now?
    If it was how was your phone unlock from the orginal carrier?

Maybe you are looking for