Unavailable track

I'm after a track that seems to be unavailable on iTunes. Is there someway I can suggest that it be put on iTunes for purchase?

Paddo,
Yes. You can submit a suggestion to this page: iTunes Store Requests.

Similar Messages

Unavailable tracks in playlists stops the playlist

I've created a playlist that contained a couple of songs that are now unavailable.
I haven't had the time to delete them, and I might want to have them there in case they get available again in the future.
But when playing the list, it all stops when it reaches this songs. I have to manually go to the next song and tap play to continue playing.
Is there a way to avoid this? I want continous playing feature even in a list with unavailable tracks!

I have the same problem and it's reallllly annoying.

Spotify playing different song than the one clicked(gif provided)

This only happens on literally one playlist,all my other playlists are fine(and some do have unavailable tracks such as this one so i assume that this is not a problem) http://gyazo.com/591163554a5d42a7287a979e975cabc0 As you can see,for some reason,a track 2 places after the clicked song is actually played... This started happening after updating a few days ago,but not immediately after

Hi, I am also having this issue - as far as I can tell it only happens to one playlist, which was created by dragging a public playlist onto the "New Playlist" box (this is the only time I have made a playlist this way - I usually create the playlist and add songs or create a playlist by dragging individual songs onto it). I'll try recreating this one by dragging individual songs onto the box - see if that fixes it. This has happened several times in the past 24 hours. A minute ago I went to another playlist and back to this one and it was fixed, but I've done nothing that would've fixed it permanently. Note that there have been several updates since March, so this wasn't fixed (at least not in all cases) in the update back in March. Any feedback on this matter, and when it will be fixed, would be much appreciated. Many thanks,Clarkey

Wrong song playing?

Hi! I have a strange bug on my Spotify. This only occurs in one playlist.When I click a song in the playlist, the song UNDER the song a clicked starts playing. This is extremely annoying. The problem started with one song in the upper part of the list, so I tried deleting that song, but it didn't solve the problem unfortunately.I've tried reinstalling Spotify, but that didn't help. Do I really have to delete every song belove that song in the playlist to make it alright again? The playlist is really long too. Can anyone please help me? Thanks!

Hello there and welcome to the community,
By courtesy of
[Try this and see if it works for you,
- Open Preferences -> Under "Display Options" set "Show unavailable tracks in playlists" to enabled.
- Open the playlist, sort by Name, scroll down until you have passed titles with number in their names. There you should see empty rows.
- Delete the empty rows.
- Now the playlist should work again.]

All tracks unavailable for iMovie

All my tracks became unavailable for my projects after the latest update. Except one single freshly purchased album... Which is a total nonsense - I got it last week but together with another one and there were many others new in my library after I updated iMovie. Even my own songs from GarageBand and elsewhere are protected which is crazy, also many regular imported mp3s.... All of them were ok before the new iMovie.
I believe something went wrong. In the lawyers' heads at least. Or is it something with my library? iCloud?

I'm really confused by your post.
Is this solved now?
Rocka wrote:
Funny is that in a Mac iMovie, there is no such rule of availability.
I am sure you can't edit music from the cloud, it has to be downloaded first.
Also any music that has copy protection should not be able to be edited in iMovie Mac or iOS.
You don't buy the rights to use music in any video you want, you buy the rights to listen to it.
On the other hand, it seems videos you do in Mac iMovie using protected music are not viewable from mobile devices but still can be viewed from a computer. It's all getting quite confusing.
This is totally wrong, sorry.
There is no way your iOS device magically knows that you have pirated or broken copyright on music in your video.
I create commercial content and videos, and so I legally use copyright material and music all the time.
There is no way that my iPad or iPhone can guess when i have used music with rights or without.
If a video cannot play on your iOS device it is more likely you have saved it in the wrong format.
I think publishing lawyers got it wrong - there is no lost revenue from people using their tracks in home videos. We won't be buying any special licences. The music industry is doomed.
It is not the loss of revenue I suspect they are worried about.
And I think that personal use for a home video now and then is not the issue.
Private videos for private use will not get you a fine.
I believe artists have the right to choose what their music is edited to in public though.
Just because you pay $2 for a music track does not give you some right to use it under any video you want.
You can't use it to sell things, or spice up your videos and show them publically, and you can't publish someone elses music on your own video; this includes You Tube as a publisher.
There is plenty of great Creative commons music if you don't want to pay a licence fee.
This is not dooming the music industry at all, it's fair pay and choice of use for artists.
Do you let anyone use your videos or music to add to their videos for free?
Would you mind if I spliced your family or personal video with some nasty imagery?
I would think not.
You say you make music, do you give it away free?
Or once it is released on You Tube or other is it then allowed to be copied and used freely by anyone?
If so then welcome to CC.
You legally do need to buy a special license to use music under video that you publish, this has always been so.

HT201272 one track from a downloaded album (dire straits-brothers in arms) ends after 55 seconds and is unavailable to download again. any suggestions?

downloaded this album and track 2 (brothers in arms) shows on device and in library as being 7.03 minutes long, however after .55 seconds it ends. i've looked to download again but that is not an option. please can anyone help?
i've also re synced without any success.

Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Parcel Tracking service unavaila

I ordered?3 Creative? HN-700 Headphones and I got a tracking number and a shiping date. Nothing happend when?I click on the links about order tracking from the mail or on the site pages.No news after 2 weeks.Can someone tell me how to use the Parcel Tracking service or is it just not working?Here is what I got on the mailear Creative Customer,
Thank you for shopping at Creative On-line Store.
Your order has been shipped from our premises on the date indicated below:
28 November 2006
Deli'very time may vary depending on the type of product and/or destination for shipping. In the meantime you may find the following list of Frequent Asked Questions helpful:
http://www.europe.creative.com/estore/info.asp
Should you wish to check the status of your order you can do so by using the Parcel Tracking service available from our site: http://www.europe.creative.com/estore/
Please enter your ten digit tracking number which is identified below :
858xxx
Should you have any questions relating to your order our On-line Sales Team will be happy to help you.
Please contact us via: http://www.europe.creative.com/estore/info.asp?page=2
Best Regards,
Creative On-line Store
http://www.europe.creative.com/estore/

I know in the US it generally takes a day or two before a tracking# will show up in the system. Wait just a bit, and if you still have trouble send an email back to Customer Support.
Dale

Mocha AE CS6 - Splines not showing so tracking is unavailable

It always seems to be me that has issues with every project he works on. Typical. So, as expected, I'm having issues with my latest project, and the client needs the completed film back fairly soon, so I'm running out of time.
My issue, is that in AE, I have a 2K project linked from a Premiere Pro project. I needed to track some of the footage in Mocha, but since it's an .R3D file, I decided to export a proxy that's a JPEG sequence, just to track in Mocha. The sequence loads inside of Mocha, and I can scrub through the timeline without any issues. HOWEVER, I can't actually track any of the footage. At all. When I click to create a new X Spline layer, and try to add my points on the footage, nothing happens. A layer is created in the let hand box, but nothing shows on the surface and I can't access the tracking options to track forwards or backwards.
As I said, the client is expecting the shots very soon, so I need to resolve this and move on to the next shot ASAP!
Thanks in advance

.r3d files are not among the supported file types for the version of mocha that came with After Effects CS6 (11.0). This was added in the version that came with After Effects CC (12.0):
http://blogs.adobe.com/aftereffects/2013/04/whats-new-in-the-version-of-mocha-included-wit h-the-next-version-of-after-effects.html

How can i make a servlet (class) temporarily unavailable, except for ADMIN

Hello All!
I am rather new to the programming field and have already completed a web-project in Java only with Servlets. (no jsp). I have a login procedure, means I have a user management for users and admins. If an admin is logged in, he/she should be able to deactivate the servlet with a mouse-click as long he activates it again with the same. if the servlet is deactivated, other users/admins trying to access the servlet should get a "servlet is currently unavailable" message. but the admin, who is logged in, still should be able to work with the servlet! how can i realise that?
in other words, by clicking that particular button, the servlet should be made "non-multi-thread" and other way round by activating it.
any ideas??? how can the standard "servlet currently unavailable" page be displayed? I have tomcat 4 on a linux machine! i'd be really grateful if someone oculd help me.
another question i have is, how to define a "pseudo" link address to the servlet. now, the servlet can only be accessed by typing like this: http://servername.xy.com:8080/ProjectName/servlet/ServletName (because I have activated the servlet mapping in the server.xml/web.xml with /servlet/*)
but I want a link like this: http://servername.xy.com:8080/shortname
How can I do this in an easy way?? I have treid to create a web.xml in der WEB-INF folder of the servlet with following content, but it is not working:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>
shortname
</servlet-name>
<servlet-class>
ClassName
</servlet-class>
</servlet>
</web-app>
Thanks a lot in advance for your kind help,
lisa

Ok,
You'll need to find a tutorial on servlet filters. Its not that hard a concept.
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Servlets8.html#wp64572
Filters need to be configured in the web.xml.
Basically they are a buffer between a request and your servlet.
Any requests for the servlet, go through the filter first. It lets you do some processing before/after the servlet gets called. Its a good way of putting in some generic code that need to be run for many servlets - security checks are often implemented in this fashion.
This should give you an idea of the sort of thing you need. I haven't really written one before, so I copied this out of the tutorial and did some basic framework for it....
public final class TestFilter implements Filter {
   private FilterConfig filterConfig = null;
   public void init(FilterConfig filterConfig) throws ServletException {
      this.filterConfig = filterConfig;
   public void destroy() {
      this.filterConfig = null;
   public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException {
        // if you want to get the session will need to cast request to an HttpServletRequest
        Session session = request.getSession();
        String requestURL = request.getRequestURL();
        // check if this URL is for a servlet that is disabled for this user
       // somehow you have to keep track of this ... maybe in the servletContext ?
    User user = (User) session.getAttribute("user")
      boolean disabled = checkDisabled(requestURL, user);
      // if its not disabled, go ahead
      if (!disabled)
        chain.doFilter(request, response);
    else{
        // send the servlet off somewhere else - requestDispatcher maybe?
}

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

ABAP API's - URGENT- Tracking of changes in MDM.

Hello Experts,
I want to track all the changes made in MDM In ECC. I know that i can do it using ABAP API's tracking feature.
I have already established the connection between ECC and MDM.
I would want to know all the exact steps to enable tracking and monitoring through ABAP API's.
Helpful answers will be highly appreciated.
Thanks and Regards
Nitin jain
Edited by: Nitin Jain on Jan 29, 2008 4:45 AM

Hi Nitin,
As you have already connected to MDM through R/3.
For Changing Tracking, you have to call the function 'MDM_ADMIN_RETR_CHANGE_TRACKING' for that you have to use structure MDM_AUDIT_INFORMATION.
I am not quite sure will it work. Please try.
Hope it helps you,
Regarding CCMS montoring in MDM ABAP APIs, refer the link:
How TO Guides available on Service Market Place.
https://websmp210.sap-ag.de/~sapidb/011000358700004121872006E --> operations
Here apart from How to guides you will also get
HowTo_CCMS_Trace.pdf : It will guide you if there any errors come in connection b/w R/3 and MDM. it does the following:
. Collect and evaluate application log data
- Collect and evaluate kernel trace data
- Problem solution showcasecomes
if your HowTo_07.pdf on Tracing report is working fine then you can identify whether is there any error coming or not.
Lets take an example : if you Shut down the MDM Server.
Then in R/3 On running HowTO_07 program:you will get ERROR DURING CONNECT: 3 , ERROR DURING DISCONNECT: 3
The Reason for this is the unavailable server. but here you will not get more details. For this
After implementing HowTo_CCMS_Trace guide: under transaction RZ20 : In Application Trace you will see error Partner not reached (hostXXX, Service 20005) and
In Kernel WorkProcess Trace: You will get error: MDE Kernel Error, NiRaw2ConnectError: the attempt to establish a socket connect caused an error.
So in this way you evaluate the error in more details.
Note: For this you should have authroize to use the transaction RZ20 in R/3 System.
Hope it helps you,
Mandeep Saini.

XAER_RMFAIL : Resource manager is unavailable

Weblogic 8.1, I don't recall which service pack, sp10? Maybe?
Anyway, here's the relevant stack trace. We had a strange WLS implosion last
night that we're tracking down. We saw these when our code was trying to get
a connection out of the datapool.
<Mar 1, 2006 10:09:12 PM PST> <Warning> <JTA> <BEA-110030> <XA resource
[weblogic.jdbc.wrapper.JTSXAResourceImpl] has not responded in the last 120
second(s).>
01 Mar 2006 22:09:21,652 WARN com.pfizer.ecms.as.MetricsSession - logEvent:
exception: start() failed on resource
'weblogic.jdbc.wrapper.JTSXAResourceImpl': XAER_RMFAIL : Resource manager is
unavailable
javax.transaction.xa.XAException: Internal error: XAResource
'weblogic.jdbc.wrapper.JTSXAResourceImpl' is unavailable
at
weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceD
escriptor.java:1019)
at
weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResour
ceDescriptor.java:572)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInf
o.java:1068)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceI
nfo.java:1001)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceIn
fo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTra
nsactionImpl.java:419)
at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:207)
at weblogic.jdbc.jts.Driver.connect(Driver.java:154)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java
:298)
at
com.pfizer.ecms.asutil.DataAccessManager.getConnection(DataAccessManager.jav
a:117)
Here's our configuration:
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
MaxCapacity="150" Name="OraclePool"
Password="*****"
Properties="user=******" ShrinkPeriodMinutes="5"
Targets="myserver" TestConnectionsOnCreate="true"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@garrison.back:1521:IC"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="dbpool" Name="OracleSource"
PoolName="OraclePool" Targets="myserver"/>
Looking this up, I was pointed to a JTA FAQ page on edocs, and it basically
said we should be Refreshing the connection pool, but the RefreshMinutes
parameter is deprecated, and as you can see we're testing connections as is.
We're puzzled by a couple of things, almost certainly application related,
but still relevant. We have 150 connections allocated to the pool, but even
at peak load during the day we bounce around the 40 mark. When we got the
above exception, we were hitting the 150 ceiling. We don't quite know why
yet.
During this time, our DB server was pretty heaviliy loaded. There were some
horrendous queries running, some data imports, etc. Bascially a bunch of
stuff that happens at the beginning of the month. However, there weren't
necessarily a lot of actual users on the system, just a select few.
One of the things that was happening was a user was using the web interface,
and sent off a huge horrible query. When it didn't come back in a reasonable
amount of time, he simply hit "Refresh" on the page, thereby submitting the
query again (thank you Sir, may I have another!). This was partly why the
database was so heavily loaded.
Now, we're puzzled by a couple of things. One, is the spike of actual
connections in the DB Pool up to 150. This makes no sense.
Second, is this error detailed above. I've tried some contrived
experiements, and I can not raise this specific exception myself. My
experiment was to issue a "update table set column = 1 where id = 1" in a
generic SQL browser, thus locking the row, and then issue the identical
command through a Session Bean call. It has happily sat there for up to 10
minutes (600 seconds, which is our default <JTA Name="inf4.2"
TimeoutSeconds="600"/> setting), and it eventually times out, but not with
the same exception. Rather I get "java.sql.SQLException: ORA-01013: user
requested cancel of current operation" from Weblogic, and
"weblogic.transaction.internal.TimedOutException:" from my client.
Apparently, according to the original exception, an XA Resource has not
responded within 120 seconds, but through my testing, that XA resource isn't
necessarily a SQL connection waiting on a query.
Could someone provide insight as to what resource the system may be waiting
on? For in theory, to me, that's what is consuming our DB Pool. I'm assuming
that whatever they're waiting on (the DB apparently), they're ALL waiting on
it, and the reason that the pool spikes is because the system can never find
a "valid" connection, thus trying again with a new one. Is that what it
happening?
Clearly we basically have a tuning issue, but in fact, I'm looking for a
stability solution. When this occurred, our system run 3 load balanced
"legs". The middle leg was having the problem. When we dropped it, leg 3
picked up and then IT had the problem. However, once we killed all 3 of them
and restarted, they recovered.
So I'm looking for some idea to keep Weblogic alive, even at the expense of
booting off these offending transactions, and not having to restart the
servers.
Perhaps over time the system would have recovered on its own (most probably
in fact), but if we can get things cut off early (as well as beating users
that hit Refresh constantly when things "stick"), we can prevent these from
escalating the effectively downing the whole site.
Any thoughts would be appreciated.
Regards,
Will Hartung
([email protected])

Will Hartung wrote:
Weblogic 8.1, I don't recall which service pack, sp10? Maybe?Well, we're only up to sp5 here, so we'll have to catch up ;)
Please try this:
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="45"
MaxCapacity="45" Name="OraclePool"
Password="*****"
Properties="user=******"
Targets="myserver" TestConnectionsOnCreate="true"
TestConnectionsOnRelease="false" TestConnectionsOnReserve="true"
KeepXAConnTillTxComplete="true"
TestTableName="dual" URL="jdbc:oracle:thin:@garrison.back:1521:IC"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="dbpool" Name="OracleSource"
PoolName="OraclePool" Targets="myserver"/>
You don't want the pool in flux at runtime, either shrinking or
growing. Just have it make what you need at startup and keep it.
Test-on-release is a waste of cycles. Also, I set keep-xa-con
till tx complete, to ensure that only one connection is ever
used for a given tx. XA allows connections to be changed at the
granularity of a single JDBC call, but that provides no real
benefit, and some overhead.
Let me know if this helps, and do let me know what real
service pack you're running.
thanks
Joe
Anyway, here's the relevant stack trace. We had a strange WLS implosion last
night that we're tracking down. We saw these when our code was trying to get
a connection out of the datapool.
<Mar 1, 2006 10:09:12 PM PST> <Warning> <JTA> <BEA-110030> <XA resource
[weblogic.jdbc.wrapper.JTSXAResourceImpl] has not responded in the last 120
second(s).>
01 Mar 2006 22:09:21,652 WARN com.pfizer.ecms.as.MetricsSession - logEvent:
exception: start() failed on resource
'weblogic.jdbc.wrapper.JTSXAResourceImpl': XAER_RMFAIL : Resource manager is
unavailable
javax.transaction.xa.XAException: Internal error: XAResource
'weblogic.jdbc.wrapper.JTSXAResourceImpl' is unavailable
at
weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceD
escriptor.java:1019)
at
weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResour
ceDescriptor.java:572)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInf
o.java:1068)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceI
nfo.java:1001)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceIn
fo.java:203)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTra
nsactionImpl.java:419)
at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:207)
at weblogic.jdbc.jts.Driver.connect(Driver.java:154)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java
:298)
at
com.pfizer.ecms.asutil.DataAccessManager.getConnection(DataAccessManager.jav
a:117)
Here's our configuration:
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
MaxCapacity="150" Name="OraclePool"
Password="*****"
Properties="user=******" ShrinkPeriodMinutes="5"
Targets="myserver" TestConnectionsOnCreate="true"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@garrison.back:1521:IC"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="dbpool" Name="OracleSource"
PoolName="OraclePool" Targets="myserver"/>
Looking this up, I was pointed to a JTA FAQ page on edocs, and it basically
said we should be Refreshing the connection pool, but the RefreshMinutes
parameter is deprecated, and as you can see we're testing connections as is.
We're puzzled by a couple of things, almost certainly application related,
but still relevant. We have 150 connections allocated to the pool, but even
at peak load during the day we bounce around the 40 mark. When we got the
above exception, we were hitting the 150 ceiling. We don't quite know why
yet.
During this time, our DB server was pretty heaviliy loaded. There were some
horrendous queries running, some data imports, etc. Bascially a bunch of
stuff that happens at the beginning of the month. However, there weren't
necessarily a lot of actual users on the system, just a select few.
One of the things that was happening was a user was using the web interface,
and sent off a huge horrible query. When it didn't come back in a reasonable
amount of time, he simply hit "Refresh" on the page, thereby submitting the
query again (thank you Sir, may I have another!). This was partly why the
database was so heavily loaded.
Now, we're puzzled by a couple of things. One, is the spike of actual
connections in the DB Pool up to 150. This makes no sense.
Second, is this error detailed above. I've tried some contrived
experiements, and I can not raise this specific exception myself. My
experiment was to issue a "update table set column = 1 where id = 1" in a
generic SQL browser, thus locking the row, and then issue the identical
command through a Session Bean call. It has happily sat there for up to 10
minutes (600 seconds, which is our default <JTA Name="inf4.2"
TimeoutSeconds="600"/> setting), and it eventually times out, but not with
the same exception. Rather I get "java.sql.SQLException: ORA-01013: user
requested cancel of current operation" from Weblogic, and
"weblogic.transaction.internal.TimedOutException:" from my client.
Apparently, according to the original exception, an XA Resource has not
responded within 120 seconds, but through my testing, that XA resource isn't
necessarily a SQL connection waiting on a query.
Could someone provide insight as to what resource the system may be waiting
on? For in theory, to me, that's what is consuming our DB Pool. I'm assuming
that whatever they're waiting on (the DB apparently), they're ALL waiting on
it, and the reason that the pool spikes is because the system can never find
a "valid" connection, thus trying again with a new one. Is that what it
happening?
Clearly we basically have a tuning issue, but in fact, I'm looking for a
stability solution. When this occurred, our system run 3 load balanced
"legs". The middle leg was having the problem. When we dropped it, leg 3
picked up and then IT had the problem. However, once we killed all 3 of them
and restarted, they recovered.
So I'm looking for some idea to keep Weblogic alive, even at the expense of
booting off these offending transactions, and not having to restart the
servers.
Perhaps over time the system would have recovered on its own (most probably
in fact), but if we can get things cut off early (as well as beating users
that hit Refresh constantly when things "stick"), we can prevent these from
escalating the effectively downing the whole site.
Any thoughts would be appreciated.
Regards,
Will Hartung
([email protected])

Music showing up unavailable

I have some music in my ITunes that is showing up as unavailable. Why is it doing that and how can I get it to play?

Not clear. Do you mean you see exclamation marks saying there is a broken link? If so, try actually finding one of the files that represents the track listed in iTunes (basically say "yes" when it asks you if you want to find it). If this isn't what you mean then you need to explain exactly what you are seeing.

"Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again."

I have imported my iPhoto library onto Aperture, and then deleted the iPhoto library so not to have any duplicates. Now, the images on Aperture are pixelated and when I try to export them the following message appears: "Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again." What does this mean? How can I get my photos "online" so that I can see them as they used to be?

How did you import your iPhoto Library? I assume, you used "File > Import > iPhoto LIbrary", but how did you set the "Store Files" pop-up menu?
If you chose to "Store Files in their current location", then you did not actually import the master image files into Aperture, but referenced them inside the iPhoto Library. In that case, you just deleted all your images, when you deleted the iPhoto Library. And if you did that, and your iPhoto Library is still sitting in the Trash, put it back; then your Aperture Library should work again. Or restore the iPhoto Library from your most recent backup and put it into the exactly same location where it used to be.
If you used a different "Store Files" setting, please explain where you have chosen to store the master image files. This will help to track down your images.
After restoring your master image files you may need to reconnect them to the versions. Post back, if you need help with that.
Regards
Léonie

Missing Plug Ins in Logic X, Cant load External Plug ins on tracks I.E Massive, FM8 ETC. Please Help!!!

Hi, I'm having problems, i just installed Logic X on my Macbook Pro after working off of 9.5 for a long time, it is kind of different and confusing, Massive doesn't show up in options when i try to skim down to AU Instruments when loading a software track and says it's unavailable in tracks from older projects from Logic 9.5 with Massive already in them, it tells me it' unavailable as part of the project and that i should install it,..But i have already. I have Massive, FM8, Albino & Absynth already installed on my laptop as well, but none show up when i try to load a track from AU Instruments at the bottom in track loading options. i tried bringing up massive from its own app hoping to somehow link the two or maybe the massive plug in would pick up the logic frequency when i play the piano roll kind of like when you bring up Reason or Ableton it automatically lins the two, but nothing, i don't understand what the issue is and Massive is my number one plug in tool for making the body of my projects Leads & Bass and most other synth needs i have for my projects, so it is a real crippling setback interfering with my production in a "Massive" way!:) Please can some one help me out, it is really pulling a raincloud over my head right now that is for sure!

Hi
LPX only supports 64bit Audio Unit plugins. Make sure that you are not running 32bit versions. Most 3rd party plugs are now available in 64bit mode, for those that are not, you could use Vienna Ensemble Pro to host them, or get 32Lives to 'wrap' them
There is also the possibility that some are not supported in Yosemite (yet)
CCT

Unavailable track

Similar Messages

Maybe you are looking for