Unbalanced Transaction Total - Invoice

Hi,
I am using the DI API to connect to a webservice which is pulling back Reserve Invoices placed on an online store and the payments. These have to equal the same amount.
I am creating the invoices but there are some which are having rounding problems which result in the payment equaling a different amount to the invoice.
Is there a way that you can explicitly set the document total so that it is always equal to the payment amount using the DI API which will use a rounding amount to automatically correct any differences?
For example:
Web invoice & payment total = $100.00
Sap calculated invoice total = $100.01
Using the DI it would automatically calculate - Invoice DocTotal $100.00 + Rounding Required $0.01
If this was possible it would allow me to ensure the payments would reconcile exactly for each transaction.
Any help appreciated

Hi James,
I have not had to do this myself yet, but the invoice object has two properties (actually 4) pertaining to rounding:
oInv.Rounding = BoYesNoEnum.tYES
oInv.RoundingDiffAmount = 0.01
You could do some testing to see if these might be any help.
Good luck,
Johan

Similar Messages

Unbalanced Transaction in A/R Invoice

Dear All,
We have been trying to add a A/R Invoice and it throws the following error named "Unbalanced transaction". Where could the error have occurred and what are the possible places that we can check these things.
Please guide me.
Thanks in advance.
- Rajesh

Hi,
Normally this error will display when your Cr. side and Dr. side of the Jornal relavant to the document A/R Invoice is not tally. Check the Cr. side amounts total and Dr. side amount total of the document.
Normally In A/R Invoice
                                                     Dr.                       Cr.
Customer Account               --         A                         --
Tax account if any                          --                          B
Sales Account                               --                          C
Total                                             A                       B+C
Here A = B+C, If this is not happened then the error will display as you told.
Pl. check the relevant account amounts.
Hope this will help you
Regards,
Venkatesan G.

Unbalanced Transaction in A/R Downpayment Invoice

Hi All
I am creating an A/R Downpayment Invoice there is no freight charges.
while adding the invoice the system is showing an error message which reads ' unbalanced transaction
message 131-91'
can anybody tell plz what is wrong..
warm rgs
anand

hi anand,
There may be few reasons for unbalanced transactions,
Check Decimal Places for Amounts in Display tab of general settings
Application error - after upgrade to latest patch it may solve
Adjusting decimal places of tax amounts / document total may solve problem.
Jeyakanthan

Unbalanced transaction - A/P Invoice

Dear all,
I am facing the error "UNBALANCED TRANSACTION" while posting the A/P invoice document. I have tried all the solutions provided in this forum, like checking the taz amounts, unchecking the unbalanced FC for journal entries in document settings, the currencies have no mismatch, all the currencies are in INR.
is there any other possibilities of this error.. it is coming for each transaction and my client is unable to post the transaction.
Please help me guys.
thanks,
Yeshwanth

Hi
Check this thread, may be it will give soln:
Error - Unbalanced transaction in AP invoice
Reg: Unbalanced Transaction
Unbalanced transaction
Giri

Unbalanced Transaction with Cenvat Tax Code

Hi All
I have a problem with A/R Down Payment Invoice.When i am trying to add the invoice with Cenvat related Tax code ( BED+VAT)the system is throwing an error which reads as follows:
" Unbalanced Transaction Message 131-91"
But when i am changing the tax code and selecting only Vat Code The A/R Downpayment Invoice is added succesfully.
Can anybody please throw some light on it what is the problem.
Can we use cenvat related Tax Code with A/R Downpayment Invoice or not..?
need your help
warm regards
anand

Hi Jeyakanthan
Thanks for the reply.Actually our client has a requirement.They do big projects of construction
as a result they receive payment in phases.The payment terms is like
1) 10% advance on receipt of order
2) Raise Invoice for 30% on approval of drawings + 100% taxes & Duties (Cenvat)+ freight
3) Raise Invoice for 40% after Initial inspection
4)Raise Invoice for 20% after final inspection.
Note: Payment terms differ with every order.
For this scenario i think A/R downpayment is ideal.Now when invoice is raised for 30% we are required to show 100% taxes and duties(Cenvat) in the A/R downpayment invoice.How to achieve this.
I have to make an invoice (Print layout report) where i have to show
Total Sales               100%
Claim Value                30% + 100% Taxex and Duties + freight
Retention Money         70% i.e Due from Customer
Your view on this would be of great help..Any alternate method to achieve this.
waiting for your reply.
warm regards
anand

Unbalanced Transaction [ Message 131-91 ]

Dear All Experts,
Iam getting error Unbalanced Transaction [ Message 131-91 ] when im adding Draft A/R Invoice.
This A/R Invoice has been made from the Sales Order.
Regards,

Hi
Rounding Method:
By Currency:
It means, we can round the document total as manually. For eg., in setting if u select this method, each and every document u can see rounding field Below the Total before Discount, freight and Discount.
Then u can tag that it an Miscellaneous Expenses account.
By Document:
Vice versa. U cannot tag to any account.
Giri

Unbalanced transaction of LC in JE

Scenario:
A. GRPO
                1. Document: Total Before Discount 110713.48
                                       Tax:      18821.27
                                       Total Payment Due    129534.75
                2. JE:    debit-inventory account    110713.48
                             credit- Allocation account 110713.48
B. AP-Invoice (Note: user adjusted the tax price in document from 18821.27 into 18821.29,then 'total before discount' was changed from 110713.48 into 110713.46 automatically)
               1. Document: Total Before Discount 110713.46
                                       Tax:      18821.29
                                       Total Payment Due    129534.75
               2. JE:            debit(1) - tax       18821.29
                                    debit(2) -Allocation account     110713.48
                                    debit(3) - price difference account -0.02
                                    debit(4) - Rounding account 0.01
                                    credit- payable account     129534.75
                  JE total:       debit 129534.76            credit 129534.75
Question: the transaction currency is RMB,but there happen an unbalanced transaction that influenced the financial report..
                Why it happened and how to adjust it?
Discuss: debit(3) price difference is easy to understand. But why debit(4) rounding account was input in here and for what?

Hi....
        Rounding Account is used to round off the value in decimals. If you make that setting at initial stage then it will come into picture at each JE whenever there is rounding.....
Regards,
Rahul

Found Error: -5012, [OJDT], Unbalanced transaction

Hello Everyone,
Our developer created an addon for SBO that is handling petty cash events. This addon creates a journal entry when an invoice with payment term = cahs is added.
The addon works fine when no payment means is given before invoice is added, i.e. invoice stays open and one journal is posted by SBO and one by the addon.
Whenever payment means is given before invoice is added, the addon halts with an error message from DI API: Found Error: -5012, , Unbalanced transaction
In this latter case 2 posting should be made by SBO one for the normal invoice and one payment, plus the addon should add a journal posting via DI API.
The actual code doesn't check any open-closed status of the invoice, justs fetches the payment term and the Doctotal of the added invoice and if payment term is cash, then wants to add a posting.
We suspect that some validation process is going on in the latter case that prevents the adding of the 3rd posting.
Has anyone seen anything like that? Any ideas?
Regards.
Bálint Hernádi

Balint,
What version of SAP Business One are you using? There were recent patches released that address the issue that you outline. Please see the attached link for the respective SAP Note on this issue.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000987398
HTH,
Eddy

Unbalanced Transaction

Hi All,
A GRPO was created with an incorrect excisable tax code. We created a correct new tax code with category other and changed in the A/P invoice. When we are trying to add this invoice the system with new tax code, is giving the error Unbalanced Transaction. How do i correct this?
Thanks,
Joseph

Hi Thanga,
No, we did not raise the IEI. The excisable check box was unchecked. The material is not excisable. So, while creating the invoice, I was trying to change the tax code when i got this message. In test db, when we replicated this scenario, i noticed that when we changed the tax code at Invoice, the document got added and the GRPO was closed. But this GRPO was displayed in the Open Item List. Why would this happen?
Thanks,
Joseph

Unbalanced Transaction error

Hi experts,
while dont a/p invoice by using the base document as GRPO, the error was showing Unbalanced Transaction
note: i set the tax code as Non deductable 100% for excise item
if am setting 0 means it was working
i done po-> copy to Grpo-> copy to Incomin exinvoice-> grpo copy to A/p invoice at that time error occuring
help me
anand

Hi,
If the tax code is exciseable then why you are doing it 100% non deductable.
Company take input for excise so it is not logical .
and if you have posted excisable invoice for grpo ,for invoice you can not change that perticuler column..
Regards
Deepak Tyagi

Unbalanced Transaction 5012

Hi! I am trying to create an AR Invoice through SDK. We've been doing that for 2+ years already and it never failed until yesterday. All of a sudden we got the "5012 Unbalanced Transaction" error in our SDK code when adding the AR invoice (of type SAPbobsCOM.BoObjectTypes.oInvoices)
The AR Invoice contains about 200 inventory items, no freight. All tax lines are marked with the "EX" tax-exempt code. The resulting journal entry should look like this:
Accounts-REceivable $yy.yy (debit)
Sales-category1 $xx.xx (credit)
Sales-category2 $xx.xx (credit)
Sales-categoryN $xx.xx (credit)
That simple! And it worked thousands of times before....
When I look at the items that should go on this AR Invoice, I am not noticing anything unusual.
We're using SAP 2007A PL47
"Block Unbalanced Journal Entry" is UN-checked
Any suggestions?
thanks
Simon

Hi Janos,
Did you solved this issue? I just have the same problem with SAP Business One 2007 A (8.00.181) SP: 00 PL: 47
Here my oJournalEntry XML before Add.
You can see that Debit sum is equal to Credit sum (highlited with red)
<?xml version="1.0" encoding="UTF-16"?>
<BOM>
<BO>
<AdmInfo>
<Object>30</Object>
</AdmInfo>
<OJDT>
<row>
<BatchNum>0</BatchNum>
<TransId>0</TransId>
<BtfStatus>O</BtfStatus>
<TransType>-1</TransType>
<BaseRef/>
<RefDate>20140104</RefDate>
<Memo>AS400-89532</Memo>
<Ref1/>
<Ref2/>
<CreatedBy>0</CreatedBy>
<LocTotal>0.000000</LocTotal>
<FcTotal>0.000000</FcTotal>
<SysTotal>0.000000</SysTotal>
<TransCode/>
<OrignCurr/>
<TransRate>0.000000</TransRate>
<BtfLine>0</BtfLine>
<TransCurr/>
<Project/>
<DueDate/>
<TaxDate>20140104</TaxDate>
<PCAddition>N</PCAddition>
<FinncPriod>0</FinncPriod>
<DataSource>N</DataSource>
<UpdateDate/>
<CreateDate/>
<UserSign>0</UserSign>
<UserSign2>0</UserSign2>
<RefndRprt>N</RefndRprt>
<LogInstanc>0</LogInstanc>
<ObjType>30</ObjType>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<StornoDate/>
<StornoToTr>0</StornoToTr>
<AutoStorno>N</AutoStorno>
<Corisptivi>N</Corisptivi>
<VatDate/>
<StampTax>N</StampTax>
<Series>1543</Series>
<Number>0</Number>
<AutoVAT>N</AutoVAT>
<DocSeries>0</DocSeries>
<FolioPref/>
<FolioNum>0</FolioNum>
<CreateTime>0</CreateTime>
<BlockDunn>N</BlockDunn>
<ReportEU>N</ReportEU>
<Report347>N</Report347>
<Printed>N</Printed>
<BaseTrans>0</BaseTrans>
<U_MIGSAP_KEY/>
<U_YVA_RENDI/>
<U_YVA_NUMREN>0</U_YVA_NUMREN>
<U_YVA_ANULADO/>
</row>
</OJDT>
<JDT1>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12121</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>0.000000</FCDebit>
<FCCredit>863.420000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140104</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>AS400-89532</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>89532</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>89532</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12311</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>431.710000</FCDebit>
<FCCredit>0.000000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140203</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>LT-268302</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>268302</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>268302</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
<row>
<TransId>0</TransId>
<Line_ID>0</Line_ID>
<Account>12311</Account>
<Debit>0.000000</Debit>
<Credit>0.000000</Credit>
<SYSCred>0.000000</SYSCred>
<SYSDeb>0.000000</SYSDeb>
<FCDebit>431.710000</FCDebit>
<FCCredit>0.000000</FCCredit>
<FCCurrency>USD</FCCurrency>
<DueDate>20140305</DueDate>
<SourceID>0</SourceID>
<SourceLine>0</SourceLine>
<ShortName>C10211220550</ShortName>
<IntrnMatch>0</IntrnMatch>
<ExtrMatch>0</ExtrMatch>
<ContraAct>C10211220550</ContraAct>
<LineMemo>LT-268303</LineMemo>
<Ref3Line/>
<TransType>-1</TransType>
<RefDate/>
<Ref2Date/>
<Ref1/>
<Ref2>268303</Ref2>
<CreatedBy>0</CreatedBy>
<BaseRef/>
<Project/>
<TransCode/>
<ProfitCode/>
<TaxDate/>
<SystemRate>0.000000</SystemRate>
<MthDate/>
<ToMthSum>0.000000</ToMthSum>
<UserSign>0</UserSign>
<BatchNum>0</BatchNum>
<FinncPriod>0</FinncPriod>
<RelTransId>-1</RelTransId>
<RelLineID>-1</RelLineID>
<RelType>N</RelType>
<LogInstanc>0</LogInstanc>
<VatGroup/>
<BaseSum>0.000000</BaseSum>
<VatRate>0.000000</VatRate>
<Indicator/>
<AdjTran>N</AdjTran>
<RevSource>N</RevSource>
<ObjType>30</ObjType>
<VatDate/>
<PaymentRef/>
<SYSBaseSum>0.000000</SYSBaseSum>
<MultMatch>0</MultMatch>
<VatLine>N</VatLine>
<VatAmount>0.000000</VatAmount>
<SYSVatSum>0.000000</SYSVatSum>
<Closed>N</Closed>
<GrossValue>0.000000</GrossValue>
<CheckAbs>0</CheckAbs>
<LineType>0</LineType>
<DebCred/>
<SequenceNr>0</SequenceNr>
<StornoAcc/>
<BalDueDeb>0.000000</BalDueDeb>
<BalDueCred>0.000000</BalDueCred>
<BalFcDeb>0.000000</BalFcDeb>
<BalFcCred>0.000000</BalFcCred>
<BalScDeb>0.000000</BalScDeb>
<BalScCred>0.000000</BalScCred>
<IsNet>Y</IsNet>
<DunWizBlck>N</DunWizBlck>
<DunnLevel>0</DunnLevel>
<DunDate/>
<TaxType>0</TaxType>
<TaxPostAcc>N</TaxPostAcc>
<StaCode/>
<StaType>0</StaType>
<TaxCode/>
<ValidFrom>19000101</ValidFrom>
<GrossValFc>0.000000</GrossValFc>
<LvlUpdDate/>
<U_BPP_CTAD/>
<U_BPP_CTAPAT/>
<U_BPP_DCCD>0</U_BPP_DCCD>
<U_BPP_DCPR>N</U_BPP_DCPR>
<U_INFOPE01/>
<U_INFOPE02/>
<U_INFOPE03/>
<U_InfoCo01/>
<U_YVA_TIENDA/>
<U_YVA_UNDTRANS/>
<U_YVA_FECDOC/>
<U_HYP_Status>3</U_HYP_Status>
<U_HYP_BofEx400>268303</U_HYP_BofEx400>
<U_HYP_Closed>N</U_HYP_Closed>
</row>
</JDT1>
</BO>
</BOM>

Sales Order Report Showing Cost on the Sales Order & total invoice dollars

I am looking for a report in SAP that shows you the Sales Order number, the cost on the sales order (NOT the average cost) the actual cost on the sales order detail line and then the total invoice dollars in month to date and year to date?
Thanks,
Linda

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Applying TAX aganist total Invoice amount

Hello ALL,
We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
any suggestions will be really appreciated
Regards
KK

Hello,
Withholding tax amounts are usually readily available in the database tables. Search for the tax amounts in the same table where you are getting the invoice amounts.
IF it is in percentage, you might have to do a simple math.
cheers,
Sushil Joshi

Applying TAX arte aganist total Invoice amount

Hello ALL,
We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not aganist total amount
As per taiwan govt rules, VAT tax should be applied aganist total invoice and then should be rounded off to nearest dollar.
Current apps doesn't allow to apply tax aganist total. We can't set rounding to 0 , then tax at each line will be rounded off to nearest dollar, there by causing tax to increase or decrease more than a dollar
Seems to be the only way to fix this is maually adjusting the tax amount at each line. Is there anything else you guys can think of ??
any suggestions will be really appreciated
Regards
KK

Hello Gurus,
Please let me know how the Solutions provided here, can delete automatically....
Is there any problem with those cheater's.....???????????????????????
Edited by: Vijay Babu Dudla on Jul 20, 2009 7:55 AM

Unbalanced Transaction Total - Invoice

Similar Messages

Maybe you are looking for