Unbale to install November update on Outlook 2007 SP3 for connecting to Exchange 2013

Hi
I was trying to upgrade my outlook 2007 clients for connecting to Exchange 2013 environment. First I have installed Office SP3 (kb2526086). Outlook version after that is 12.0.6607.1000. Later I tried to install nNovember 2012 update which is a
prerequisite for connecting to Exchange 2013 clients (support.microsoft.com/kb/2687404/en-us) but it shows me a message "Expected version of the product was not found on the system". No idea how to proceed now, expecting help.

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Unbale to install November update on Outlook 2007 SP3

Hi
I was trying to upgrade my outlook 2007 clients for connecting to Exchange 2013 environment. First I have installed Office SP3 (kb2526086). Outlook version after that is 12.0.6607.1000. Later I tried to install nNovember 2012 update which is a prerequisite
for connecting to Exchange 2013 clients (support.microsoft.com/kb/2687404/en-us) but it shows me a message "Expected version of the product was not found on the system". No idea how to proceed now, expecting help.

Hi,
Are you installing it manually? After installing Office 2007 SP3, please check for updates first in Windows Update, and install any available updates to your Office suite. The specific update (kb2687404) might need any other updates as
a prerequisite.
Also, please ensure Outlook is not running in compatibility mode:
Go to Program Files or Program Files (X86)>Microsoft Office>Office12, find the Outlook icon, then do a right-click on it and select ‘Properties’.
Select the ‘Compatibility’ tab then uncheck the ‘Run this program in Compatible mode for’
option. Please verify result then.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2007 - single profile connecting to Exchange 2013 / 2007 mailboxes

Hi,
I am in the early part of a migration from Exchange 2007 to Exchange 2013. So far I have 2013 installed and running in a DAG and just moved my own mailbox to the new server.
I set up a new profile in Outlook 2007 which connects to my mailbox on Exchange 2013. The problem is that I need to add additional mailboxes to my profile which are still hosted on Exchange 2007, however this is not working.
I thought at one stage I tested this and was able to get it work with a test mailbox also hosted on Exchange 2013.. but maybe I never did.
Does anyone know if this is possible at all (single Outlook profile, primary mailbox hosted on Exchange 2013 and other mailboxes on Exchange 2007). Most of our users have an additional mailbox mapped in their profile so I hope there is some way around this.
Thank you!

Hi,
It is possible to open a shared mailboxes on a legacy server.
Your problem could be caused by:
Not having one of the later CU installed (read CU4 or CU5)
Incorrect authentication methods configured (see link below)
Outlook is not at the latest patch level
Users of Exchange Server 2013 can't open public folders or shared mailboxes on an Exchange 2010 or Exchange 2007 server
http://support.microsoft.com/kb/2834139
Martina Miskovic

Outlook 2007 keeps on prompting password / exchange 2013

Hi All,
Need a help.
We have moved 4 users from exchange 2007 to 2013 for some tests
-SSL cert installed on the new server
-outlook 2013 have no issues connecting to exchange 2013
-outlook 2007 can connect to exchange 2007 when creating the profile (after installing the necessary updates)
-outlook keeps on asking for password
-anybody encountered the same after switching to exchange 2013?
Thanks.

can you quickly let me know your outlook 2007 version. expecting it to be latest .. SP3
please check :
Outlook 2007 SP3 with November 2012 Cumulative Update ( available from
http://support.microsoft.com/kb/2687404 )
didnt notice that it is for outlook 2007, try below and please let me know
get-outlookanywhere | Set-OutlookAnywhere -ExternalClientAuthenticationMethod Basic -IISAuthenticationMethods basic,ntlm,negotiate -InternalClientAuthenticationMethod basic
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Outlook 2007 does not connect to exchange at computer startup

Hi all :)
Here's the situation we're encountring: we are using exchange 2010 with outlook 2007 clients. The issue is that at the startup of the computer, outlook does not connect to exchange (it opens up but it marks that it's not connected to exchange). After trying
a few times it connects and stays stable (if I close outlook and I open it again, it connects normally).
This suggests that there's may be a DNS problem: The client is having an issue resolving the name, but once it does and the IP of exchange is available in the cache, outlook doesn't face any issues.
So I ran some nslookup commands and I noticed the following:
when I try to resolve the name of exchange, the request times out twice before providing the answer.
This issue occurs only for forward lookups (when I try to resolve the same IP for the hostname, there's no timeout)
I also noticed that this issue only occurs when I run nslookup from the client machines (no timeout when I run it from exchange for instance).
Any ideas about what the problem might be? Could it be something else other than DNS?
Thank you all for your help.

Hi all,
The problem seems not to be related to DNS. Our exchange 2010 organization was actually migrated from a 2007 one. Since then we noticed this issue of outlook taking too much time to connect and sometimes disconnects. I was messing around into adsiedit and
I noticed that a decomissioned Mailbox Server from our old exchange 2007 organization still exists among the new exchange 2010 objects.
To further look into it, I ran best practise analyser, the result (to my surprise) was that exchange is still trying to contact the old exchange 2007 server.
I ran some network trafic captures with Network Monitor, but I was not very successful interpreting anything.
I uploaded the .cap files with the best practise analyser report and a print screen of the old server into adsiedit objects. I hope you'll be able to help with it.
I took the network captures on the two CAS Servers (configured in a CAS array) and on a client machine. The IP addresses are as follow:
client 192.168.0.47
Domain Controller1 192.168.1.205
Domain Controller2 192.168.1.213
CAS1 192.168.2.216
CAS2 192.168.2.217
CAS Array 192.168.2.218
Download Link: https://onedrive.live.com/redir?resid=9360346C01880F58%21935
Thanks,

Outlook password prompt for mailboxes on Exchange 2013 CU1

I migrated a few users from our Exchange 2007 SP3 Update 10 server to Exchange 2013 CU1. Now in Outlook they are getting a password prompt, and it won't accept their password. Our public folders are still on Exchange 2007 if that makes a difference.
I tried running
Test-OutlookConnectivity -GetDefaultsFromAutoDiscover:$true
but it says it doesn't recognize the parameter -GetDefaultsFromAutoDiscover:$true
Here's the values for Get-OutlookAnywhere:
ExternalHostname : legacy.domain.com
InternalHostname :
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Ntlm}
ExternalHostname : mail.domain.com
InternalHostname : clippers.domain.local
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Negotiate
IISAuthenticationMethods : {Negotiate}

Hi GraffitiK
How is your test? Did the issue resolve?
Cheers
If you have any feedback on
our support, please click here
Zi Feng
TechNet Community Support

Exchange 2007 SP3 RU compatibility with Exchange 2013 lattest CU

Hi Team,
I have question, I want to migrate my exchange 2007 to 2013.
right now exchange 2013 already provide CU7.
My question is, is exchange 2013 CU7 compatible with Exchange 2007 SP3 lattest RU (SP3 RU15) ?
is there any limitation of version if i want to upgrade Exchange 2007 to 2013
Thanks Before

Hello,
The first thing I would say, is that the MINIMUM supported update for Exchange 2007 is SP3 RU 10, so you should be ok with RU15 installed with Exchange 2013 Cu7.
https://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
The second thing I would say, and I am not sure how you're current environment is configured and how you plan on configuring your future environment, but if you are using Public Folders, Exchange 2013 CU7 changes the way public folders are handled during
coexistence. I would recommend taking a look at this blog post from The Exchange Team
https://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

External outlook clients can't connect to Exchange 2013

Currently running server 2012 r2 and exchange 2013 sp1...
Internally everything works fine, clients can also connect externally to owa/ecp. However when using an outlook client they are unable to connect. This is my first experience with exchange 2013 so I am at a loss. What steps should I be following to get this
working properly? Or if anyone has some suggestions to get more information I can do that as well.
Thanks!
Connecting from a mobile-phone using mail.mail.com works fine.
We are using a self-signed certificate for testing purposes..

Testing Outlook connectivity.
The Outlook connectivity test failed.
Additional Details
Elapsed Time: 941 ms.
Test Steps
Testing RPC over HTTP connectivity to server mail.mail.com
RPC over HTTP connectivity failed.
Additional Details
Elapsed Time: 941 ms.
Test Steps
Attempting to resolve the host name mail.mail.com in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: xxx.xxx.xx.x
Elapsed Time: 535 ms.
Testing TCP port 443 on host mail.mail.com to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 176 ms.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 229 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server mail.mail.com on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=mail.mail.com, Issuer: CN=mail.mail.com.
Elapsed Time: 154 ms.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
Host name mail.mail.com was found in the Certificate Subject Common name.
Elapsed Time: 0 ms.
Certificate trust is being validated.
Certificate trust validation failed.
Test Steps
The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=mail.mail.com
A certificate chain couldn't be constructed for the certificate.
Tell me more about this issue and how to resolve it
Additional Details
The certificate chain didn't end in a trusted root. Root = CN=mail.mail.com
Elapsed Time: 33 ms.

Connection beetween Exchange 2013 with outlook client 2007 SP3

Hi All,
My company reinstall exchange 2013 when the previous mailbox DB error. When I implemeted a new server. I configured step by step carefully. if we use outlook 2010 connect to exchange server, send/receive work normally. But someone, uses outlook 2007 SP3,
they have somer error. They work with "cached mode", the connection from outlook to exchange server connected normally, but mail items sometime disappear in outlook client, when i check in the OWA, the mailbox item appear on this.
I tested with "online mode", the mailbox items push into outlook.I switched to "cached mode", this items haven't in outlook. Everybody who's meet the problem, please help me the solution can resolve the problem? Many thanks.
Quoc Dao

Hi,
Would you please let me know edition information of the Windows Server? Is it a Windows Server 2012, Windows
Server 2012 R2 or other?
On current situation, please refer to following KB and check if can help you.
Sometimes e-mail messages do not appear in your
Cached mode Inbox even though they were synchronized down from your mailbox
By the way. Based on your description, this issue seems to be more related to Outlook 2007. If this issue still
exists, I suggest that you should post in
Outlook forum. I believe we will get a better assistance there.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unrecognized certificate when Outlook 2010 tries to connect to Exchange 2007 on SBS 2008

Hi all,
I believe this is a security issue rather than a connectivity or configuration problem.
Running Outlook 2010 on Windows 7 trying to connect to Exchange 2007 on SBS 2008, I receive the following error:
"The name of the security certificate is invalid or does not match the name of the site"
When I view the certificate I see that it was issued to "zx-server" by "zx". This is NOT my domain CA nor is it a certificate I recognize. I use a self-issued certificate (i.e. issued by the SBS box). I also receive this certificate error when I browse to
the internal website (companyweb). No other computers on the network are seeing this behaviour.
I have checked the certificate stores in certmgr and I can't find any such certificate or CA. I have also searched the entire hard drive with no luck. I have run Kaspersky AV, Malwarebytes and MS Security Essentials several times but I can't find any malware.
I also recently installed Comodo Firewall (the problem began after this).
I need to find and remove the certificate and prevent it from being presented to me every time I try to connect to the server. All help, advice and suggestions appreciated.
Aide

Hi,
It’s really a common issue.
This issue occurs if the following conditions are true:
You replace the default self-signed Exchange Server 2007 or Exchange Server 2010 certificate with a different certificate.
Note The Setup program in Exchange Server 2007 or in Exchange Server 2010 creates a default self-signed certificate when Exchange Server 2007 or Exchange Server 2010 is installed.
The common name on the replacement certificate does not match the fully qualified domain name (FQDN) of the URL that is stored in the following objects:
o
The Service Connection Point object for the Autodiscover service
o
The
InternalUrl attribute of Exchange 2007 Web Service (EWS)
o
The
InternalUrl attribute of the Offline Address Book Web service
o
The
InternalUrl attribute of the Exchange unified messaging (UM) Web service
By default, the URL that is stored in these objects references the NetBIOS name of the server. For example, a URL that resembles the
following URL is stored:
https://NetBIOS_name.contoso.com/autodiscover/autodiscover.xml
This may differ from the host name that is used in the FQDN of the replacement certificate. For example, the replacement certificate
may have an FQDN that resembles the following FQDN:
mail.contoso.com
This issue causes a name mismatch error to occur. Therefore, you receive the security warning message when you try to connect Outlook
2007 to the mailbox.
For more detailed information about the procedures to fix the issue, please refer to the following KB article:
Title: Security warning when you start Outlook 2007 and then connect to a mailbox
that is hosted on a server that is running Exchange Server 2007 or Exchange Server 2010: "The name of the security certificate is invalid or does not match the name of the site"
URL:
http://support.microsoft.com/kb/940726
Regards,
James
James Xiong
TechNet Community Support

Outlook 2007 SP3 can't connect to Exchange 2013

Outlok 2007 with latest hotfixes
Freshly migrated mailboxes
Gives the error
Can't open outlook-The set of folders cannot be opened
Cert has internal FQDN name. Encryption is disabled
Any pointers?

Does the certificate have the server name?
That was apparently the solution here:
http://social.technet.microsoft.com/Forums/exchange/en-US/1ae67f48-d1ba-44b5-a3c7-4e9a5e955f3e/outlook-2007-cannot-connect-to-exchange-2013?forum=exchangesvrclients
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Outlook 2010 connected to Exchange 2013 prior to coexistence

I installed Exchange 2013 into the environment (Exchange 2010 SP3) and left it at that (ie no additional config). I noticed Outlook 2010 client connected to Exchange 2013 somehow (it got a cert warning). Why would Outlook connect to the new
Exchange 2013 server like that? Although I enabled Outlook Anywhere, it is not trying RPC/HTTP first, but rather RPC/TCP.

Hi,
By design, if the user mailbox located in Exchange 2010 server, the Outlook client will connect to Exchange 2010 server automatically.
According to your description, I found that we have nothing additional configuration on Exchange 2013. So, only server name and internal services' URLs are configured automatically during the Exchange 2013 server installation.
If it has no mailbox located in Exchange 2013, it is odd that Outlook client connect Exchange 2013 first.
I suggest running "Test E-mail AutoConfiguration" in Outlook to verify which Exchange server the Outlook connected.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

Hi,
Did you get any error messages?
Do you have Outlook Anywhere and autodiscovery set up properly?
Can you ping the Exchange server?
Please use Test Email AutoConfiguration
to test if the Autodiscover service is configured properly. See:
https://hosting.intermedia.net/support/kb/default.asp?id=2150
We can also use the remote connectivity analyzer to troubleshoot the issue:
https://testconnectivity.microsoft.com/
In addition, turn off your firewall and anti-virus to check the result.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Unable to connect to Exchange 2013 using Outlook 2010/2013 with latest patch

Dear All,
I'm setting up Exchange 2013 CU2 coexist with Exchange 2010 SP3. Since we are still planning and testing, the internet is still pointing to 2010 for send/receive mails.
The 2013 environment are:-
2 X CAS server with MS NLB configured
2X MBX server with DA
Internal NLB/licent access: excas2013.int.my.domain
External access (current set on 2010 as well): webmail.my.domain
Certificate with valid subject name has been import to 2013 and 2010:
CN: webmail.mydomain
SAN: excas2013.int.my.domain
SAN: excas.int.my.domain (for 2010)
I am able to connect to my Exchange 2010 user thru 2013 CAS server and proxy to exhcnage 2010 by outlook. However, I cannot connect to Exchange 2013 user by outlook. During mail profile create of Exchange 2013 user by autodiscover (pointed to exchange 2013),
the process looks good:-
Establish network connection (checked)
Searching for [email protected] server settings (checked)
Log on to server
The process stop at "Log on to server" and a windows prompt, saying:
The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Clicked OK, I can see:-
MS Exchange Server:
[email protected]
Mailbox:
=SMPT:[email protected]
WHen I click "Check Name", it said The name cannot be resolved.
I have no idea of what is going on. Just want some help~

I have checked the iis log:-
2013-09-23 06:58:29 10.144.144.71 POST /autodiscover/autodiscover.xml &cafeReqId=99ed5467-a294-481c-95eb-9b21d6530404; 443 mydomain\training101 10.144.85.4 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.7106;+Pro) 200 0 0 8018
2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f4652a19-2e8e-4652-a007-0cf0b7fb792e&cafeReqId=f4652a19-2e8e-4652-a007-0cf0b7fb792e; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c48cda77-6008-423b-8e8b-d6d40f4d1b39&cafeReqId=c48cda77-6008-423b-8e8b-d6d40f4d1b39; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=033f1ce4-43ba-49b1-b226-f4cc357e7702&cafeReqId=033f1ce4-43ba-49b1-b226-f4cc357e7702; 443 - 10.144.85.4 MSRPC 401 1 2148074252
15
2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=d2424d25-ca9e-4867-922f-e527b041d9db&cafeReqId=d2424d25-ca9e-4867-922f-e527b041d9db; 443 - 10.144.85.4 MSRPC 401 1 64 0
2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=ff35f49b-e418-4d55-b66c-dbae509cc12f; 443 - 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 401 1 2148074254 0
2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=033f8ed6-d7ce-41b2-8ed2-e275e22e53be; 443 mydomain\tkchung 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 200 0 64 15
2013-09-23 06:58:37 10.144.144.71 POST /powershell serializationLevel=Full;ExchClientVer=15.0.712.24;clientApplication=ManagementShell;TargetServer=;PSVersion=3.0&sessionID=Version_15.0_(Build_711.24)=rJqNiZqNgbqnsr3Py9GWkYvRlZqc0ZyQkoHOxsvOxsbJzczNgcbQzczQzc/OzN/Ixc/KxczI376y&cafeReqId=5350aa81-6668-489e-b099-3b3647115f10;
80 mydomain\Administrator 10.144.144.71 Microsoft+WinRM+Client 500 0 0 180040
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f961c596-efff-4696-9188-611a0d151601&cafeReqId=f961c596-efff-4696-9188-611a0d151601; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=753d8852-ce19-459c-ac78-849c3e51e0a1&cafeReqId=753d8852-ce19-459c-ac78-849c3e51e0a1; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c9e86049-c883-4b03-8546-143909361a80&cafeReqId=c9e86049-c883-4b03-8546-143909361a80; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 64 78
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=327ace4c-b2c8-44c1-95ba-7871727f60ef&cafeReqId=327ace4c-b2c8-44c1-95ba-7871727f60ef; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 109
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=a7c8daa9-e458-4f2d-b388-7300e8679dcd&cafeReqId=a7c8daa9-e458-4f2d-b388-7300e8679dcd; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=c40afede-dd8f-4ac7-a3dd-827872bb2e76&cafeReqId=c40afede-dd8f-4ac7-a3dd-827872bb2e76; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=2dc56148-1900-4044-b72a-4b13e5e871f0&cafeReqId=2dc56148-1900-4044-b72a-4b13e5e871f0; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 64 15
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=9475aad3-9537-4dac-86cb-6fdb187fa148&cafeReqId=9475aad3-9537-4dac-86cb-6fdb187fa148; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 31
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d&cafeReqId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=b1a3e503-1077-4144-84df-fcdb65a7eea4&cafeReqId=b1a3e503-1077-4144-84df-fcdb65a7eea4; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=5b5639ba-4c91-4351-bda6-bcec46d6b218&cafeReqId=5b5639ba-4c91-4351-bda6-bcec46d6b218; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 0 15
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f200806f-3294-4210-8940-e3fee0385ccd&cafeReqId=f200806f-3294-4210-8940-e3fee0385ccd; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 46
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=675d6515-85da-43fa-9cd8-0a18ac06a71f&cafeReqId=675d6515-85da-43fa-9cd8-0a18ac06a71f; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b97b2c3e-5309-4927-8330-fe0f339b5930&cafeReqId=b97b2c3e-5309-4927-8330-fe0f339b5930; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=504d462a-db21-4e4b-8568-79e4099d78c1&cafeReqId=504d462a-db21-4e4b-8568-79e4099d78c1; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 0 31
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b4757b1e-8428-454a-91df-ca0a2153144f&cafeReqId=b4757b1e-8428-454a-91df-ca0a2153144f; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 46

Unbale to install November update on Outlook 2007 SP3 for connecting to Exchange 2013

Similar Messages

Maybe you are looking for