Unbale to move the stock...Urgent

Hello Friends
Stock is transferred to other plant. In the said PO stock type was mentioned as "Quality Inspection", as a result material lying in Quality inspection. Unfortunately there was no Inspection Plan for said material hence Inspection was not generated and hence not able to see in QA32. Now we want to move it to Unrestricted but system is not allowing to do so with the error message "Change the inspection stock of material ABC in QM only". We have tried with manual creation of Inspection lot, MB1B, MBST but every time getting the same message. How can we proceed? Kindly advice.
Prompt reply is highly appreciated.
Regards
mahesh

Hi Mahesh,
This is common problem in QM when sometimes system doesn't create QM lot and we could not move this to unrestricted use stock because UD is not possible.
I faced the similar problems and the only way to search the suitable SAP notes and run it. This is not possible by any other way.
The relevent SAP notes incase of STO scenario are: 385355, 309924, 95352 and 170135.
There is program ZQEVAC20 develop by SAP to overcome is problem but unfortunately this is relevent for release 3.0.
Hope this reply will help you.
Regards
TAJUDDIN

Similar Messages

Move the stock from the raw material storage type to production storage typ

Hi
How to move the stock from the raw material storage type to production storage type.
note that both stoare type be in same storage location only.
pls reply me

Hi Raj,
I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
which you could do with posting change document. This doesnt reduce your WM stock.
If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
this reduces your WM stock.
hope it helps.
Regards
Harish

How to Move the stock from restriced stock to unrestricted stock

hi all,
I have issue with blocking and unblocking stocks for sales documents.
Let me explain the issue by taking an example for which i consider the following data
Material : x
available qty :100
Scenario
when we create a quotation for material "X" for 10 qty, then the system will reserve or block that 10 qty against100 qty for that quotation,where the total qty will show as 100qty, but logically only 90 will be available for other users.
When we create sales order with reference to quotation, Suppose if we deliver and PGI the 6 qty out of 10 qty, which was a ordered qty , then the available qty is reduced to 94 qty. but after 90 days of sales order creation or quotation creation. the left over qty with this quotation or sales order have to be pushed back to avialable qty.
Means the 4 qty which is not delivered in this sales cycle and aged 90 days from the creation date has to be pushed back to available qty. then the system will allow other users to use this 4 qty which is blocked for this quotation/sales order .
Please help me with transaction code and steps to fix this issue.
Your inputs will be higly appreciated and valued.
Waiting for all you guys reply.
Thanks,
Mahesh M Basappa
Edited by: Mahesh Basappa on Jul 9, 2008 4:46 PM

Dear Friend,
in 344 movement type for unrestricted to blocked,
movement of unrestricted to restricted
Both are same, shall i use it in MB1B,
Becaues stock has been received through Return sales order,
they want to move this unrestricted to restricted.
Thanks and Best Regards,
Muralidharan S

How to move the stock after quality inspection in wm

hi ,
if i am posting GR with PO for the material XXXX quantity of 10 it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this TR manual, two posting occurs one for gr posting and another one for manual tr...how to control this....
ex: matxxx-10 quantity
migo posted(no stock should be posted in wm)
after qc--8 quantity o.k
then we need to move this 8 quantity to storage bin.
how to achive this process in WM. (i already working manual TR it will create two posting)
Thanks
Muthuraman.D

Hi,
Use movement type 103 for GR. so, the goods will posted in to blocked stock. you deselect the auto TR creation for 103 movement type.
once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
Now you may avoid double tr creation.
this you have to discuss MM consultant also. because of 103 & 105 movement type using.
SAM

How to move back the stock to inventory management?

Hi,
I have done goods movement in inventory management and it has created transfer requirement in warehouse mangement. Now the stock is in storage type 921 stock transfer and it is in restricted batch mode. I want to move the stock back to inventory management. Please guide me with the transaction code details and movement type details.
Thanks for your time.
Raja

hai
    For this issue goto t.code MSC2N give Material,Batch and Plant.
than select Basic data1 and find batch status select unrestr-use.
      i think this is help to you.
          regards
                  m.harikrishna.

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

How to resrve the stock to the customer against the sales order

hi,
sap gurus,
good morning to all,
how to reserve the stock to the customer against the sales order if this process is not MAKE TO
ORDER SCENARIO.
the prices of the products will be often changing drastically so
he is following MAKE TO STOCK Process in his production process.
so with out using m.t.o. process how to reserve it against the customer.
for eg:
in the market when the customer/dealer/stockist coems to know that prices are going to increase
then obviously he tends to purchase in bulk quantities and reserve it in godown.
so how to map that process.
help me on this.
regards,
balaji.t
09990019711

Dear Balaji,
This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
Regards,
Sudhir

Move QI stock from UD to intransit

Hi experts,
1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
Rgds

Hi
1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
During UD its not possible.
You have only limited things available here . But you can put into block stock (or Unrestricted)& from block stock (or Unrestricted) you can move stock to transite.
2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
No its not possible.
It will throgh erroe of "stock type QI only"
Regards
Sujit

How to move material stock from HU to HU

Dear experts,
I have two HUs. Both of them have a material inside.
When I'm trying to create an product wharehouse task in term to move the full content from the HU 1 to the HU 2, the HU 1 will also be packed into the HU 2, even I'm expecting that one empty HU and one HU with materials will be there after this process.
What could be wrong at this process?
BR
Denis

Hi,
well there some HUs in the storage bin (189020 and 189023):
Now I'm trying to create an product WT to move the stock (1 PC) from the HU 189020 into the HU 189023 (with 199 pc). After this movement I'm expecting ant empty HU 189020 and a HU 189023 with 200 PC.
My WH Task:
But instead of one empty HU and a HU with 200, my HU with 1 PC will be packed into other HU:
First of all I get the warning "Could not determine availiable stock"
and than as I said the HU 189020 is inside of 189023:
How can I get an empty 189020 and full (200) 189023 in this case?
Thanks
BR
Denis

Moving the stock to inspection to unrestricted

hi,
i completed the flow from gr to destination bin flow but the stock remains in quality inspection not in unrestricted use. how to move the stock from quality inspection to unrestricted use.(without changing the bin number)
Regards
muthuraman

Hi Muthuraman,
You want to transfer the stock from quality to unrestricted. you may follow the below process:
1, do transfer posting of the material from Quality to unrestricted in MB1B with 321 .
it will generate the posting change no.
2. create a Transfer order in LT06 with respect to the above material document no.
it will put the stock in interiam storage type 922.
3. confirm the TO.
hope this will help.
regards,
Anubhab

Urgent: move the created_by field to preq_name for PR in srm

Hi All ,
I need to move the created_by field into preq_name field when creating Shopping cart in SRM the backend PR will create .
I need it urgently..
Thanks in Advance,
Prashnath.

Hi,
You can try to create a new standard view, then select “created by” and “modified by” column under columns, next apply this view, finally check the effect.
Did you customize the permissions of the list or document library? Did you customize the permission of the item? For example, break the permission inheritance form its parents. If so, try to inherit permission from its parents, after that create a new standard view according to the steps above, then check the effect.
By default, permissions on lists, libraries, folders, items, and documents are inherited from the parent site. However, you can break this inheritance for any securable object at a lower level in the hierarchy by editing the permissions on that securable object (that is, creating a unique permission assignment) . For example, you can edit the permissions for a document library, which breaks the permissions inheritance from the site.
You can also try to create a new document library, then create a new document with user A, after that log into with user B, check the effect.
For more information about SharePoint : page level permissions, please refer to the following article:
SharePoint : page level permissions
http://blogs.msdn.com/brettrobinson/archive/2009/04/24/sharepoint-page-level-permissions.aspx
For more information about control access to sites, please look into the following articles:
About controlling access to sites and site content
http://office.microsoft.com/en-us/sharepointtechnology/HA101001441033.aspx
Permission levels and permissions
http://office.microsoft.com/en-us/sharepointtechnology/HA101001491033.aspx
For more information about how to create a view, please refer to the following article:
Create or change a view
http://office.microsoft.com/en-us/help/HA100215771033.aspx
Hope this helps.
Rock Wang
Rock Wang– MSFT

Move Win8.1 from the stock HDD to an SSD

Move Win8.1 from the stock HDD to an SSD
I have a Lenovo K450e ... DeskTop -Model Number:10181
win 8.1... 32 GB RAM
Going to install ...
Kingston SSDNow V300 Series SV300S37A/240G 2.5" 240GB SATA III Internal Solid State Drive (SSD)
And it appears after searching/reading some other post that this May be the only way it can be done >
{ http://forums.lenovo.com/t5/Windows-8-and-8-1/Moving-Windows-8-1-from-HDD-to-SSD/m-p/1843542/highlig... }Move Win 8 to SSD
See above link for other links
"AFAIK, there's no official guide yet on how to move Win8.1 from the stock HDD to an SSD (upgrade) except by using a recovery disc or a recovery drive but for any given model, may it be a laptop or a desktop, your other choices are the following:
Option 1: ( I have Not yet decided on this )
Clone / migrate the OS from the HDD to the SSD
- this is ideal if you don't want to re-install all of the soft-wares
To do this, while booted on the stock HDD, you will need to connect the SSD to the machine (eg. using a 2.5" SATA enclosure) and use a data migration software to clone/migrate the HDD to the SSD. After the process is finished, remove the stock HDD and replace it with the SSD and all should be good.
Other guides:
- OS Migration (using Paragon Backup & Recovery Home)
- Disk Cloning (using Macrium Reflect)
Option 2: [ I will most likly to do this ]
Clean install the OS to the SSD
- this is ideal if you wanted to start fresh
To do this, you will need to:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One) {{ Done > DL Win 8.1 burned ISO }}
2. Follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows).
Is this still the BEST/Only way to move Win8.1 from the stock HDD to an SSD ??
I assume there is NO way to use OneKey Recovery or windows Recovery ( I have both on USB Flash Drives )
Thank You
Purplemtn/Rick

Macrium Reflect, but it has been a while since I cloned a drive.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Explain the terms of Revaluations,Goods Movements,Material Stocks.

Hi all,
I am technical consultant, need to under satnd the terms in Inventory Evaluation so please help me regarding the below things:
1. Please tell what is" Revaluations" process in Inventory & what is this effect on stock?
2. what is the Goods Movements & material Stock types ?
Please give me the above details.
Thanks,
Kiran Manyam

hi,
Revaluation:
When changing your plan data, you can revaluate the values using either a percentage increase or decrease. This enables you, for example, to base your plan values for 1999 on your actual values from 1998 plus 10%.
You can execute the revaluation when changing plan data automatically, and in interactive planning
Goods movement :
Its means nothing but the moving of goods for one may be from one storage loc to another , plant to plant, etc..
Inside it you will posting for :
1. sampling
2. scrapping
3. unrestricted to Blocked
2. unres. to Quality
etc..
Stock type:
There are three stock type:
1. Unrestricted ( valuated, can be plaanedvia mrp)
2. quality stock (valuated, can be planned(check once))
3. blocked stock(valuated, not able to plan via mrp)
Apart from all three therealso GR blocked which is non-valuated type
Matrial type:
Its define the type of material whther its UNBW non-stock matrial , roh , HALB etc...depending upon this only the quantity / value is unpated....as defined in the customization..
Regards
Priyanka.P
AWARD IF HELPFULL

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

First check to make sure you have data turned on and not just Wi-Fi. From reading your question you seem to be saying e mail is working just not attached photos. What size are the photos as some HD photos can't be sent. Your camera may be set at a very high picture size and you can go to settings and lower the size and that may solve your mailing problem.

Urgent help!! In 'export audio to movie' the final option to disable the original audio has disappeared. I am no longer allowed to deselect the audio tracks. Any ideas why Logic has stopped this?

Greeting all
I'm creating a movie with a new music track and follow the appropriate steps as in the manual:
Choose format options for the bounced audio file, and click OK.
In the dialog that appears, enter a name and target folder for the movie, and click Save.Another dialog opens, allowing you to choose which of the original movie’s audio tracks should be used in the new movie.
Select the audio track that you want to retain in the new movie, and click OK.
The QuickTime movie is exported to the selected folder; it contains all selected audio tracks, plus the part of your project that is encompassed by the start and end points of the QuickTime movie.
However, this final dialog option 'select the audio tracks of movie to keep in new movie' has disappeared!!! For some reason Logic goes straight to bouncing without the offer to remove the original audio. My final movie ends up with both sets of audios. Any ideas please???
Best
Juan

It is still there and Logic did not remove it.
Did you do some trouble shooting.
Try to load a different video (with different codec) to see if it is video file related
Try a new (empty) project to see if it is project related
Try to remove Logic preferences (move the original back if this wasn't the problem because the file contains other info you might not want to lose)
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Unbale to move the stock...Urgent

Similar Messages

Maybe you are looking for