Unbreakable oracle linux- cannot install veritas storage foundation

can install storage foundation 5.1 on redhat 5.5 same box and it works fine. When upgraded to unbreakable kernel, veritas becomes broken.
if install kernel first, then try storage foundation install, gets this error:
This release of VxVM is for Red Hat Enterprise Linux 5.
Please install the appropriate OS
and then restart this installation of VxVM.
error: %pre(VRTSvxvm-5.1.100.000-SP1_RHEL5.x86_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping VRTSvxvm-5.1.100.000-SP1_RHEL5
I have looked and have found nothing that says it shouldn't work. Any ideas?

Not yet BUT have found this doc:
http://www.symantec.com/business/support/index?page=content&id=TECH50963&key=56211&actp=LIST
It appears that it is supported if you can reproduce the issue. Thing is the issue is the installation of the storage foundation packages. That works fine under standard linux kernel.
My question to you is if you have seen storage foundation work with the unbreakable kernel.

Similar Messages

Migrating Oracle from Solaris to Linux: Trouble converting FileSystem metadata with fscdsconv in Linux (Veritas Storage Foundation)

Hello everyone,
I'm in the process of migrating an Oracle DataBase from Solaris 5.10 server to Linux Red Hat 6.4, the storage used is SAN and volumes managed by Veritas Storage Foundation on Solaris
At this point, I'm trying to convert the byte order of some volumes that come from Solaris in my Linux server using the following command:
/opt/VRTS/bin/fscdsconv -y -e -f /tmp/vxConv/dbtemp01.tmp -t os_name=Linux,arch=x86 /dev/vx/rdsk/dgtemp/dbtemp01
Note: Because of the text formating, the above command could span several lines, but I'm executing it in just one
And I get the following errors:
UX:vxfs fscdsconv: ERROR: V-3-20012: not a valid vxfs file system
UX:vxfs fscdsconv: ERROR: V-3-24426: fscdsconv: Failed to migrate
Searching for a solution of these errors in the Veritas forums, I've found this post, where the user mikebounds gives some steps to migrate Solaris to Linux. I've found that I've replicated these steps but I get stuck on the fscdsconv because the beforementioned errors.
Does anyone know what could be happening here or have any sugestion to share?
Software Versions involved:
RHEL 6.4 x86_64
Veritas Storage Foundation Enterprise 6.2.0.100 on Linux
Solaris 5.10
Veritas 5.0 on Solaris
Disk layout v7
vxfs filesystem format
Oracle 10g
Thank you very much in advance for any help/ideas to solve this
Best regards
Raul

have you seen this - How to migrate a data store from Solaris to Linux? (Doc ID 1302794.1)
HTH,
Pradeep

Virtualbox ORACLE Linux not installing

Not sure what the issue is. I have Virtual box - upgraded to today's version
I got a copy of Oracle linux (6) at a seminar today. The goal is to install Oracle Linux on the Virtual box to test it.
During the install the keyboard commands (options?) flash by too fast to read.
Installation says the kernel is not right "This kernel requires x8-64 CPU, but only detected an i686CPU."
Well it is a 64 bit CPU.
I tried it on a 32 bit CPU box and got the same result.
alas. is this a bust?

Here's some additional information that seems relevant to your problem: http://www.virtualbox.org/ticket/2061
You could also check your VBox.log file, which contains, among a lot of other things, detailed information about the host CPU type and supported features.
I suggest to check if there is a BIOS update available for your computer, or try to use a 32-bit Oracle Linux distribution, which you can download for free from https://edelivery.oracle.com/linux
Regarding your hardware upgrade question, check the following: http://en.wikipedia.org/wiki/X86_virtualization
+As of 2009[update] not all Intel processors supported VT-x, which Intel uses to segment its market.[20] Support for VT-x may even vary between different versions (as identified by Intel's sSpec Number) of the same model number.[21] [22] For a complete and up-to-date list see the Intel website.[23] Even in May, 2011, the Intel CPU P6100 which is in laptops does not support hardware virtualization [1].+
Edited by: Dude on Aug 11, 2011 6:01 PM

Cannot install Windows-Identity-Foundation

Hello, I've tried to install "Windows-Identity-Foundation" feature, but without success (OS is Windows 8.1 Professional).
I can not find this feature in the UI (ControlPanel -> Programs&Features -> "Turn Windows Features on or off").
So I've tried to install it via command line (dism tool).
I've checked feature via executing command "dism /online /Get-FeatureInfo /FeatureName:Windows-Identity-Foundation"
this command line is returning correct output on working machine,
but on my machine it returns:
> Error: 0x800f080c
> Feature name Windows-Identity-Foundation is unknown.
> A Windows feature name was not recognized.
So I can't install it via the "dism /online /Enable-Feature /FeatureName:Windows-Identity-Foundation" command.
That issue is occurs not only with the "Windows-Identity-Foundation", but also with some other features (for example "Legacy Components").
Next I googled that this issue may be fixed via calling "sfc /scannow" to restore the packages,
but "sfc" is ended with message "Windows Resource Protection found corrupt files but was unable to fix some of them.";
the log file contains the next errors:
* STATUS_OBJECT_NAME_NOT_FOUND #5186404# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(
* Error STATUS_OBJECT_NAME_NOT_FOUND originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression
(full logs I put in the onedrive http://1drv.ms/1BILQWs )
so that errors are not clear to me,
please guide me how I can try to fix this issue?
any advice is welcome.

Just have tried to execute "InstallFeature" with /Sourceand locate image with windows installation files
>dism /online /enable-feature /featurename:Windows-Identity-Foundation /Source:G:\sources\sxs
and the response:
Error: 0x800f080c
Feature name Windows-Identity-Foundation is unknown.
A Windows feature name was not recognized.
The dism.log file contains errors:
* Failed to get the Update through CBS. - CDISMPackage::Internal_OpenFeature
* Failed to get the underlying CBS Feature - CDISMPackage::OpenFeature
* Feature name windows-identity-foundation is unknown. - CPackageManagerCLIHandler::Private_GetFeaturesFromCommandLine
* Unknown features were specified on the command-line. - CPackageManagerCLIHandler::Private_GetFeaturesFromCommandLine
* Failed to get the Feature List from the command line. - CPackageManagerCLIHandler::Private_ProcessFeatureChange
* Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine
Full log file copied to onedrive: http://1drv.ms/18TpVSf .
I am accepting any advice.

Oracle-Linux 11g Install error

Hi guys,
After starting Ora installer on Linux I'm getting this error:
Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
: No such file or directory
I downloaded 11g twice thinking that maybe the files are corrupt but both times got the same error as above directory does not exist when I unzip Oracle 11g db files... ???
Please help.
I downloaded 11g twice thinking that maybe the file is corrupt but both times got the same error as above directory does not exist when I unzip Oracle db files...
Please help.
Thank you very much.
Art.

I already closed the session... I started Oracle Installer as a super user in Oracle-Linux:
...@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 21968 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-13_08-24-59PM. Please wait ...
Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
The problem I think is that directory '.../oracle.jdk/...' does not exist.
Thank you very much.
Art.
Edited by: user6248369 on Feb 13, 2011 6:24 PM

Parameters of NFS in Solaris 10 and Oracle Linux 6 with ZFS Storage 7420 in cluster without database

Hello,
I have ZFS 7420 in cluster and OS Solaris 10 and Oracle Linux 6 without DB and I need mount share NFS in this OS and I do not know which parameters are the best for this.
Wich are the best parameters to mount share NFS in Solaris 10 or Oracle Linux 6?
Thanks
Best regards.

Hi Pascal,
My question is because when We mount share NFS in some servers for example Exadata Database Machine or Super Cluster for best performance we need mount this shares with specific parameters, for example.
Exadata
192.168.36.200:/export/dbname/backup1 /zfssa/dbname/backup1 nfs rw,bg,hard,nointr,rsize=131072,wsize=1048576,tcp,nfsvers=3,timeo=600 0 0
Super Cluster
sscsn1-stor:/export/ssc-shares/share1 - /export/share1 nfs - yes rw,bg,hard,nointr,rsize=131072,wsize=131072,proto=tcp,vers=3
Now,
My network is 10GBE
What happen with normal servers only with OS (Solaris and Linux)?
Which parameters I need use for best performance?
or are not necessary specific parameters.
Thanks.
Best regards.

How to encapsulate virtual disk under veritas Storage Foundation 6.0 on Solaris 10 Sparc

Hi all I'm trying to encapsulate a disk under Veritas SF 6.0 but the system return the following
bash-3.2# vxdisk list
DEVICE       TYPE            DISK         GROUP        STATUS
c0d0s2       auto:ZFS        -            -            ZFS
c0d1s2       auto:none       -            -            online invalid
c0d2s2       auto:none       -            -            online invalid
the computer is a virtual computer and when I try the etc/vx/bin/vxdisksetup -i c0d1 format=sliced command
it send back the following message VxVM vxdisksetup ERROR V-5-2-43 c0d1: Invalid disk device for vxdisksetup.
I need your help Community.

Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
in question, and links to WebLogic Server generic installers that can be used on any supported platform.
To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
32bit native Solaris installer for 10.3.0 is Part Number V13618-01
64bit generic installer for 10.3.0 is Part Number V13672-01

Cannot install SAP Widget Foundation

Hi there,
i want to install the SAP Widget Foundation. But the following error occurs:
C:\TEMP>C:\j2sdk1.4.2_18\bin\java -jar C:\TEMP\SAPWidgetFoundation.jar
Exception in thread "main" java.lang.UnsupportedClassVersionError: corp/sap/pal/
ewcs/wizard/installer/SimpleWizard (Unsupported major.minor version 50.0)
        at java.lang.ClassLoader.defineClass0(Native Method)
        at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
        at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
3)
        at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
        at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Can anybode help in here?
Thanks
Bjoern

Hi bjoern,
You need to Install Java 6 Runtime Environment. I can see that you are using Java 14. SDK. This will not support SAP Widget Foundation. You can download Java 6 [from here|http://java.sun.com/javase/downloads/index.jsp].
Thanks,
Sai

Installing Veritas SF on Solaris 10 5/08 - perl - cannot execute

Hi all,
I have been trying to install the Storage Foundation on a Solaris 10 5/08 box. Running ./installer from the DVD gives me quickly the following error message, 3 repeated lines (referring to file/folders on the DVD):
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
./installer: ./perl/SunOS/perl/bin/perl: cannot execute
After installing Solaris I updated it and installed the companion programs. I also compiled and installed the more recent perl 5.8.8.
Does anyone have any idea why the Storage Foundation is giving me this? All the r/x. rights are in place.
Best regards

Hi,
Why aren't you just unzip the file locally, on your target server? It shouldn't use a lot of space.
Regards,
catalin.

Information about Sun Cluster 3.1 5Q4 and Storage Foundation 4.1

Hi,
I have 2 Sunfire V440 with Solaris 9 last release 9/05 with last cluster patchs.. , Qlogic HBA fibre card on a seven disks shared on a Emc Clariion cx500. I have installed and configured Sun cluster 3.1 and Veritas Storage Foundation 4.1 MP1. My problems is when i run format wcommand on each node, I see the disks in a different order and veritas SF (4.1) is also picking up the disks in a different order.
1. Storage Foundation 4.1 is compatible with Sun cluster 3.1 2005Q4?????
2. Do you have a how to or other procedure for Storage foundation 4.1 with Sun Cluster 3.1.
I'm very confuse with veritas Storage foundation
Thanks!
J-F Aubin

This combination does not work today, but it will be available later.
Since Sun and Veritas are two separate companies, it takes more
time than expected to synchronize releases. Products supported by
Sun for Sun Cluster installation undergo extensive testing, which also
takes time.
-- richard

Unbreakable Oracle 5.5 kernel and Lustre 2.0 GA?

Does anyone know if the new Lustre 2.0 GA rpms are compatible with a fully up to date Unbreakable Oracle Linux 5.5 kernel? I'd like to be able to use the most current Lustre on Unbreakable Linux 5.5 for a project I'm working on.
Any feedback is appreciated.

Not according to: http://wiki.lustre.org/manual/LustreManual20_HTML/LustreInstallation.html#50548845_pgfId-1291694

Cannot install oracle 9i on linux (fedora core 2)

dear all members.
I cannot install oracle 9i on linux (fedora core 2)
progress bar stop at 17% no activity at hardisk. I wait for 15 hours , still no movement. file being copy is " naeet.o " , I am not sure how importance is it.
I try several times, but still similar result....
Amnuay U.
[email protected]

Hi,
I think that Feedbak forum is not the best place for this problem.
You should ask this into
=> Installation Forum : Database Installation
or
=> Linux Forum : Generic Linux
Anyway, you can find an install doc here :
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
Nicolas.

Cannot install oracle vpn on linux getting error kernel-sourcecode is neede

cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.

1. kernel (.rpm)
2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
3. kernel source rpm (src.rpm) - source for rebuilding the kernel
4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
are four different packages.
If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
NJ

Cannot install 8.1.7 Linux Oracle

Hi,
I downloaded the 8.1.7 Oracle linux version from ORacle.com.
But when i tried to install it it does not work.
I created the oracle and apache users.
I de-tared the file on the hard disk.
- I can launch X11 apps from the user oracle (so it's not a problem with the DISPLAY) -
I launched the exe runInstaller but nothing appeared and no error message. The lonely message is :
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
And I still wait...
So I asked for questions such as :
- What version of jre should I use ? The installer seems to have one
- And if I need one how must I install it ? Should I set a link jre in the /usr/local. Or set the path to the jre in the PATH variable environnement.
- The documentation given with the version is not clear at all about this subject.
Thanks for all informations cause I'm lost.

Here is a link to a site with instructions that I used to install Oracle 8.1.7 on a Linux Server running using Glibc 2.2
http://jordan.fortwayne.com/oracle/817.html
This site indicates that you need to use jdk118_v3-glibc-2.1.3.tar.bz2 from www.blackdown.org. Although I have heard of people using IBM's Java as well. Furthermore, Sun has a java implementation that works as well. Just make sure you obtain the right version. I recomend reading the installation documenation that comes with Oracle 8.1.7. It tells you what java version to use. I believe Oracle recommends Sun's java implemenation for Oracle 8.1.7 on the Linux Platform.

Cannot install Oracle Linux on HP DC 7700 series PCs

Hi,
Im trying to install Oracle Linux on DC 7700 series and installation got hang up at the point where the "PCI Probing starts"
Please do provide a remady for this !
Nuwan

1). Oracle 9i will be easily installed on these linux ?It will install easier on Oracle Linux than any other.
2). These linux distro is more or less same like other linux distros (eg: ubuntu, fedora) i means i do and install other utilities and software for other type of usages ??Since OEL is intended as an O/S for mostly servers, it may not include support for the very latest desktop / laptop hardware. It may not include consumer-type applications like MP3 players either.
3). I will not have to pay for any type of repo access or packages installation ???No, you are welcome to download, install and use OEL without any charge. You can get it from the edelivery.oracle.com site, or access it piecemeal at the http://public-yum.oracle.com web site.
If you want support or updated RPM packages since that distribution release, only then will you need to purchase a subscription.
So, use the original distribution RPM packages for free (edelivery or public-yum.oracle.com), only need paid subscription for updated RPM's or support.
4). I will be install other locally downloaded softwares ( .rpm, .sh. .bin) files like netbeans, amrok wiht avi and mp3 capabilities for playing video tutorials, open office, acrobat reader, flash, burning software, gimp, matlab and saas ??????In general, yes, you can install software intended for Red Hat Enterprise Linux or Oracle Enterprise Linux.
Check out the EPEL project (Extra Packages for Enterprise Linux) at http://fedoraproject.org/wiki/EPEL for an additional repository which may already have the extra software you are looking for.

Unbreakable oracle linux- cannot install veritas storage foundation

Similar Messages

Maybe you are looking for