Uncaught exception: Anyone seen this message? Any ideas?

My Curve's Address book won't open -- I get this message:
Uncaught exception:
Application net_rim_bb_addressbook_app(143) is not responding; process terminated.
Message Edited by lance_a_simon on 08-24-2008 06:19 PM
Solved!
Go to Solution.

Usually this error is seen in a corrupted bookmark. Do you have any blank contacts?
Try doing a batter reset poll the batter out with the device ON, leave out for about a minute, replace, and let the device reboot 1-3 min.
See if problem returns,
Please let me know!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    My brand new iPad has flickering lines across the centre of the screen. It has just been taken out of it's box! Has anyone experienced this? Any ideas or simply take back to store?

    This shouldn't happen. Take it back since it's new.

  • Help has anyone seen this message before?

    so i go to the app store to buy os x lion and i really excited. i hit buy for 29.99 and the usual "we need your password deal pops up". but i look at the email and it reads [email protected] this is not me and i have know idea how this is on my account! so i just put in my username and password and i get this message. "There was an error in the App Store. Please try again later. (4)" and then "Unknown error". please can anyone help?

         You're welcome, glad I could help
    <3

  • Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

    I'm running into this situation where one of my WLS servers is generating the following
    messages "Configuration changes for domain saved to the repository." This process
    of saving to a repository is causing an issue on start-up. Typically my deployments
    take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
    to my application. I've been able to identify that this process of saving to a
    repository is the main issue of contention....
    Anyone know what the message means? Anyone know how to disable this message?

    This is just WebLogic writing back changes to config.xml, which it does from time
    to time for reasons like:
    - your app deployment has changed.
    - you've reconfigured something in the console.
    etc...
    WebLogic just spins this off into a handy execute thread, so it would be surprising
    if this was causing your app deployment to slow down (how do you know it is).
    In my experience, slower than normal app deployments are usually down to:
    - waiting for database connections.
    - waiting for connecitons to other external resources.
    Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
    so if something's slow, everything gets blocked behind it.
    simon.
    I'm running into this situation where one of my WLS servers is generatingthe following
    messages "Configuration changes for domain saved to the repository."This process
    of saving to a repository is causing an issue on start-up. Typicallymy deployments
    take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
    to my application. I've been able to identify that this process ofsaving to a
    repository is the main issue of contention....
    Anyone know what the message means? Anyone know how to disable thismessage?

  • Sometimes my arrow keys stop working in Firefox; has anyone else seen this? Any ideas on what could be causing this?

    Fairly often when I'm using Firefox I'll suddenly find that the arrow keys have stopped working. I could be typing something in a text box and using the arrow keys to navigate the cursor, or I could be using the arrow keys to scroll a page up / down, or anything else, or trying to arrow down through the menu bar selection. It doesn't matter; the arrow keys are completely ignored everywhere within the Firefox program -- except for one case: If I press and hold an arrow key long enough for the auto-key-repeat to kick in, then the arrow key will be recognized and the appropriate response will be performed -- but only rapid-fire, and only for as long as I hold down the arrow key.
    When this problem occurs, it's only within Firefox. When I switch over to any other programs that happen to be running, the arrow keys behave normally.
    The problem happens often, but not necessarily every time I run Firefox.

    I'm having the same problem. I tentatively blame the Adobe Reader plugin. In the current browsing session, the problem occurred when I opened a PDF. As soon as I disabled the Adobe Reader plugin, it went away. I've disabled the plugin and I'll see how things go. I'm running FF7.0.1 on WinXP SP3 with Adobe Reader 10.1.1.33. (I can confirm I'm not accidentally enabling Caret Browsing.)

  • Illustrator error message - anyone seen this one before?

    Hi there,
    I was merrily working on my logo yesterday in CS4, saved it as an .ai file, closed it down and now today when I go to open it I get this:
    "acrobat pdf file format is having difficulties. Object label badly formatted."
    Has anyone seen this before and have a way of fixing it? I went to my backups and they are all the same, not sure what else to do!!
    Thanks in advance for any help you can offer.

    Check this out.
    http://forums.adobe.com/message/2258412?tstart=0#2258412
    Basically it's a problem with Suitcase Fusion.

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Unable to enroll in Creative Cloud - regardless of browser or credit card the message is that my billing info is incorrect - anyone seen this issue or not the resolution - support could not resolve it?

    Unable to enroll in Creative Cloud - regardless of browser or credit card the message is that my billing info is incorrect - anyone seen this issue or not the resolution - support could not resolve it?

    If Adobe support can't fix the problem, I doubt that anyone in an open forum will be able to help (this is not Adobe support)
    Change Account https://forums.adobe.com/thread/1465499 may help
    -ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    or
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Have anyone seen this exception before??? setNull() feature not implemented

    java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Optional feature not implemented
    Have anyone seen this exception before????? I see this exception when I use the "setNull()" function in the preparedstatement class.

    statement.setNull(index, Types.NUMERIC); //works
    statement.setNull(index, Types.DECIMAL); //does not work

  • Need help with Backup problems - anyone seen this before?

    I am experiencing 2 primary problems:
    1) When attempting a recent backup with HotSync on my desktop PC (Treo 700p, HotSync Manager v. 6.01, XP): I hadn't backed up for a few weeks, and this time it crashed sometime during the backup of the Calendar (and this behavior is repeated).  So I then unchecked the backup of Calendar, but then it just hung on Contacts for about 15 minutes, so I realized it wasn't doing anything anymore (I have lots of contacts, but not not 15 minutes worth).  At this point I gave up, but I obviously need to figure out how to make HotSync work again.  Any ideas?
    2) (not sure if this is the forum to address this): When using Backup Buddy v. 2.04 a couple of days ago, every time I tried to backup, it would get maybe 1/5th into the backup and crash and restart.  I figured out in short order that Address.DB is what was causing the crash. [I tried to e-mail the file so I could examine it and save it, but just attaching it in SnapperMail made the device crash].  So I took the chance of deleting the Address.DB (as it seemed small and didn't appear to contain any backup information), and it looks like all of my information was retained.  My question here is: two times since the initial problem, something has recreated Address.DB, which again causes the 700p to crash, so I have had to delete it again.  So when is this file being (re)created, and what is the purpose of it?
    An additional (minor) difficulty that I've had occur on a couple of occasions: After a recovery (where my BackupBuddy information was more current than my HotSync data), I restored, and all the calendar entries were double - 2 identical entries adjacent to one another. Has anyone seen this?
    Thanks in advance -
    B
    Post relates to: Treo 700p (Verizon)

    Sounds like the device has become corrupted.
    Post relates to: None

  • Has anyone seen this behaviour of AccessHW In Port?

    Yesterday I was trying to check the operation of a plug-in PCMCIA parallel port, specifically I wanted to know if there were any timing issues with this device on an XP machine, so I thought I would try the AccessHW In and Out functions in Labview. I installed an old copy of Labview 6.1 (It was 5:50PM and I wanted to do this fast!) and tried it.
    Reading the memory location where the device's status port was supposed to be just returned zero. Strange, I thought, so I tried some other addresses in the I/O range. I got zero from every single one. I tried the same on my own laptop, which is also XP, and I was getting sensible numbers from addresses in I/O space.
    Has anyone seen this behaviour? The machine has McAffee on-access protection running, which cannot be disabled (company IT policy), and I have a suspicion that this might be blocking accesses to low memory, is this possible?

    Sorry... my mind is not working well this morning   You had mentionned that in your original post and the fact that it is a PCMCIA parallel port.
    As for the address location, I have seen addresses in the 0x2000 region for add-on parallel ports (not PCMCIA).
    I haven't used a PMCIA device with Win-XP.  Does the address info for that port appear under properties when you look at the HW devices within the Control Panel's System.  From what I can recall, you can change the PCMCIA serial port number within the HW device, so maybe the properties will list the address.. 
    Have you checked this?
    RayR.
    Message Edited by JoeLabView on 07-02-2008 11:20 AM

  • Pop-up window with an attempt to open a URL - has anyone seen this?

    I was browsing a website for music lyrics when a suspicious pop-up appeared, along with a very small browser window (about an inch square on the screen). This has happened twice even though I have pop-ups blocked.
    The pop-up had the Safari icon and looked like a standard mac window. The text contained the following:
    <edited by host>
    Antivirus 2009 will perform a quick and 100% free
    scan of your computer for Viruses, Spyware and Adware.
    Do you want to install Antivirus 2009 to scan your
    computer for malware now? (Recommended)
    There is a cancel and an OK button at the bottom.
    The small browser window appears to be contacting the onlineprivatescan.com URL
    I did a force-quit because I did not want to click either button.
    I reset Safari, and ran the DNSChanger Removal Tool
    from macupdate, but it didn't find anything. I have not loaded codecs from any websites and I had just completed the latest Apple updates for OSX, Quicktime and iTunes before this problem occured.
    Has anyone seen this? Is this serious? I've never had any problems with Safari before this.

    Mac OS X 10.4 Tiger automatically checks your downloads for malicious software and content that could harm your system or collect information from your computer. You can read more about that here:
    http://support.apple.com/kb/HT2340
    If you feel you need added protection, read on:
    SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
    http://macscan.securemac.com/
    The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X. Called DNSChanger Trojan and also known as OSX.RSPlug.A Trojan Horse, the software attacks users attempting to play a fake video file.
    Upon attempting to play the video, the victim receives the following message:
    “Quicktime Player is unable to play movie file.
Please click here to download new version of codec.”
    Upon running the installer, the user's DNS records are modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's DNS records stay modified on a minute-by-minute basis.
    SecureMac's DNSChanger Removal Tool allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
    There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac. A white paper has recently been published on the subject by SubRosaSoft, available here:
    http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
    Also, beware of MacSweeper:
    MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
    http://en.wikipedia.org/wiki/MacSweeper
    On June 23, 2008 this news reached Mac users:
    http://www.theregister.co.uk/2008/06/23/mac_trojan/
    More information on Mac security can be fund here:
    http://macscan.securemac.com/
    More on Trojans on the Mac here:
    http://www.technewsworld.com/story/63574.html?welcome=1214487119
    The latest news on the subject, from July 25, 2008, is:
    Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
    The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
    In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
    Net security groups say there is anecdotal evidence that small scale attacks are already happening.
    Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
    You should also read what a major contributor called tacit has to say here:
    http://tacit.livejournal.com/238112.html

  • Has anyone seen this voip soloution yet?

    Has anyone seen this voip soloution yet advertised on Nokias website?
    if you take a look at this page it looks like nokia and avaya are getting ready to release a new voip client that can work on series 60 and series 80 phones. it looks prett cool, but i have no idea if this will look at any voip server, or a companies voip server.
    i am guessing that this will be worth a look once it is released, after all it seems the mail for exchange client is now working on Nseries phones which is cool.

    Hello,
    As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
    AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
    I hope that it will take not a lot of time for AVAYA.
    I'll let you know about the results.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

    I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
    is the first time you have seen this message, please try again later. If this
    problem persists, please contact your administrator."  When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields." 
    The last time I checked it was working, I'm not aware of any new updates installed recently?  I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

    Hi Sara,
    First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
    was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
    my novice questions below?
    1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
         Error generating in red towards top of the audience page..."One or more values typed on this page are not valid.  Check the text for the indicated fields."
         Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
    2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm).  Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"?  I checked all
    3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
    3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem?  What does it do?  And How do I run it?
    4. I'm also new to viewing the ULS log.  I'd just downloaded a viewer for it.  I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
    Admin is installed)?  There's so many of them, what should I be looking for exactly?
    Evenstarline 

  • Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please

    Hi, I've just tried to upgrade my iphone 3gs and it wont restore from itunes or connect to the server to activate. Sorry I started this !  Any ideas please it's driving me mad and Ive lost my phone

    What is the exact message you're getting?

Maybe you are looking for