Unclear AP_id from cfgadm -al
I have a SSD drive, In 3G system, it comes in the format of
c9::dsk/c9t5001E8200992A823d0 when I am doing cfgadm -al
However in some other system, it comes in the format of
c9::w5001e820013607af,0
what does this mean? How can I translate this to the c::dsk/cxxx format?
please give output of following :
#echo|format
#luxadm -e port
#luxadm probe
Similar Messages
-
Removed LUN won't dissapear from cfgadm
Hi All,
This is a S10u4 + SC3.2 two node cluster using LUNs from a SAN.
STMS is used and I use four paths to the storage.
When removing a LUN it will show up as expected from
cfgadm -al -o show_SCSI_LUN as unusable.
When trying to remove these entries (four paths) there is
almost always one path that does not succeed, no specific path
and it behaivs the same on both nodes.
From failed path:
c2::201400a0b8113128,23 disk connected configured unknown
c2::201400a0b8113128,25 disk connected configured unusable
c2::201400a0b8113128,26 disk connected configured unknown
From a path where unconfigure succeeded
c3::201500a0b8113128,23 disk connected configured unknown
c3::201500a0b8113128,26 disk connected configured unknown
Trying to run unconfigure unusable... again I'll get this:
cfgadm -c unconfigure -o unusable_SCSI_LUN c2::201400a0b8113128
cfgadm: Library error: remove operation failed: /devices/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w201400a0b8113128,19: No such device or address
( LUN 0x19 = 25)
Also, the mpathadm list lu will fail like this:
/dev/rdsk/c4t500000E012F63670d0s2
Total Path Count: 1
Operational Path Count: 1
/scsi_vhci/ses
Total Path Count: 1
Operational Path Count: 1
mpathadm: Error: Unable to get configuration information.
mpathadm: Unable to complete operation
If I do a boot reconfigure the unusable LUNs are gone and mpathadm will work.
Do I need to scrub the keys from the LUN that is to be removed?
Is it possible in any other way than rebooting? (luxadm, cfgadm...)
/BR
UlfYes, I've tried that. In that case all LUNs were unconfigured except the
LUNs that, actually is gone, will still show up as configured unusable.
/BR
Ulf -
Low and unclear sound from headphone HP Pavilion G6 2228tu
laptop hp pavillion g6 2228TU OS windows 8 pro 64 bit
every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
I tried headphone with my desktop and mobile but it was working fine.
I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..Hello Deepak-Kumar,
You’re having a problem with the sound not be very loud.
Go to device manager and uninstall the IDT audio.
Do not restart the computer.
Now install the updated sound driver.
Since it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.
Have a good day. -
Originally my question was above, but now I think it is a non-issue as this process led me to creating new Moziilla Support Account (and is not the same as a new account created form Mozilla Homepage.) But the process seems to be a bit backwards and unclear starting from reading Mozilla Support webpages and then trying to do the requirements in order to make a reply. Mozilla Support Reply links and Sign-In links so not have the typical links to create a new (specialized) account. Dialog messages say an email has been sent, but nothing is received. It is confusing to ask a question first in order to get to the next step to "Register or Sign in" (the above time line) especially when it is known upfront (from reading details from Mozilla Support pages) that you need to login in to reply.
Even now, I see in the timeline and the button below (Post Question), that I am writing and will post this entry during this "Fill in details" section before completing the next section "Confirm registration".
Anyhow, assuming all goes ok, I will be posting the reply-question right after I finish the time line steps.
Thanks for listening. --BillThat is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ " -
Just upgraded from XP to W8 then W8.1 and cannot get the RAID to work.
For the upgrade, I took out the RAID drives, and just left the system drive in place.
In XP the system has run with a system disc connected to a SATA port, and two larger drives in RAID1 (Mirror). The 3 discs are IDE drives each with an IDE to SATA converter. Its an MSI H67MA-E35(B3) motherboard with low power (eco) i3 processor.
After the upgrade, the BIOS SATA was set to IDE. When I put the two larger drives back into the PC (these are in caddies), W8.1 recognises them as separate drives.
I changed the BIOS to RAID, then got "Windows ran into a problem and needs to restart ..", then into a fix loop. After investigating, I found that changing the registry key for a SATA AHCI boot is where to start: HKLM\System\CurrentControlSet\Services\storAHCI\StartOverride
to 0, then in msconfig setting boot to safe mode, restart the PC, in BIOS set SATA to AHCI it took ages to boot to safe mode. Resetting to normal boot it works fine in AHCI mode.
The result is the same as IDE mode, W8.1 boots and works the same.
With limited and often unclear information from the web, I wanted to move onto RAID config. So changed the key: HKLM\System\CurrentControlSet\Services\iaSTorV\StartOverride to 0, this I understand is the Intel RAID driver activation, and setting
to boot to safe mode, I then set the BIOS to RAID on reboot. W8.1 never even gets to safe mode, no matter what I then do I cannot get W8.1 to get past the "Windows ran into a problem and needs to restart ..".
I would really appreciate this answering once and for all, with a process that actually works, by someone who knows and is not just guessing - preferably someone from Microsoft PLEASE.
What seems so silly is that W8 is reading data from the main drive to give me the repair loop, so why has MS made this so stupidly difficult. It is not uncommon to want to add additional drives to a PC, and in the past this has not been an issue to achieve. This
seems a real step backward from XP
Thanks.I just stumbled across this thread while trying to solve the same issue. My son has a PC with an ageing Intel D945GTP motherboard running Windows 8.1. I acquired a second hard drive and wanted to add it and create a RAID 1 array as security against HDD failure
but without losing data from the existing drive. At first I encountered all of the frustrations that you have detailed here. However, in the end, it was quite simple. I found a couple of threads online that indicated the procedure, as follows:
In Windows, open msconfig.exe (in Windows 8 just type this in the Metro screen and it will find the file)
On the Boot tab, check the box for Boot in Safe Mode, click apply and OK, then close msconfig.
The computer will prompt you to restart, click OK
During restart, go into the BIOS (click and hold either Delete or F2 depending on your motherboard)
In the BIOS, select the Advanced tab and go to Drive Configuration
Select RAID
Save changes and exit the BIOS.
The computer will restart and Windows will boot in safe mode. While it is booting in safe mode, Windows will install the RAID drivers. You can check it in Device Manager under Storage Controllers.
Open msconfig again and unckeck Boot in Safe Mode
Windows will prompt you to restart. This time Windows will boot normally with RAID enabled.
You can now download Rapid Storage Technology from the Intel download center and use the software to configure your RAID array from within Windows.
This process was relatively simple and worked perfectly first time in Windows 8.1 32 bit. -
Two node cluster - disk not responding to selection
I'm building 2 node cluster (Solaris 10/SC3.2) on Dell's 1950/PERC6i servers with quorum as a virtual server. Because I need to introduce quorum server to the cluster - my cluster nodes are still in install mode.
I have tried to add quorum using scsetup or clsetup but I'm getting always the same message:
root@node01:~# scsetup
Failed to get node zone list
Failed to get node zone list
This program has detected that the cluster "installmode" attribute is
still enabled. As such, certain initial cluster setup steps will be
performed at this time. This includes adding any necessary quorum
devices, then resetting both the quorum vote counts and the
"installmode" property.
Please do not proceed if any additional nodes have yet to join the
cluster.
Is it okay to continue (yes/no) [yes]? yes
Unable to establish the list of cluster nodes.
Press Enter to continue:Also the most imortant issue is that immediately after restart of the first node during scinstall procedure, I started to getting those follwing messages:
Feb 4 17:33:20 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:33:20 node01 disk not responding to selection
Feb 4 17:33:21 node01 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:33:21 node01 disk not responding to selection
Feb 4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@1,0 (sd4):
Feb 4 17:26:46 node02 disk not responding to selection
Feb 4 17:26:46 node02 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,25e3@3/pci1028,1f0c@0/sd@0,0 (sd3):
Feb 4 17:26:46 node02 disk not responding to selectionBoth nodes are extreamly slow, I could use only telnet to login because of long timeouts for many services.
Here is output from: cfgadm -l
root@node01:~# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c4 fc connected unconfigured unknown
c5 fc connected unconfigured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok
usb2/1 unknown empty unconfigured ok
usb2/2 unknown empty unconfigured ok
usb3/1 unknown empty unconfigured ok
usb3/2 unknown empty unconfigured ok
usb4/1 usb-hub connected configured ok
usb4/1.1 usb-device connected configured ok
usb4/1.2 usb-device connected configured ok
usb4/2 unknown empty unconfigured ok
usb4/3 unknown empty unconfigured ok
usb4/4 unknown empty unconfigured ok
usb4/5 usb-hub connected configured ok
usb4/5.1 unknown empty unconfigured ok
usb4/5.2 unknown empty unconfigured ok
usb4/5.3 unknown empty unconfigured ok
usb4/5.4 unknown empty unconfigured ok
usb4/6 unknown empty unconfigured ok
usb4/7 unknown empty unconfigured ok
usb4/8 unknown empty unconfigured okHow to solve those two problems? This one with SCSI issue and a problem with node list...
Best regards,
VladimirDuring a last weekend I have reinstalled both nodes. I rebuild virtual disks (LUNs) under PERC 6i controller. I have chosen RAID0 instead of RAID1 as it was before. Still I'm not sure did RAID0 help me or just a rebuilding disks. MegaCli tool from LSI could not help me and tell what was wrong with disk/partitions that I used with first try. For MegaCli status of controller was without errors.
Probably something was wrong with this partitioning. I used also as in first try Solaris 10 with latest patches 01/2009 and Sun Cluster 3.2 also with latest security patch.
After reinstalling everything is almost fine :-). The only difference with other productive clusters (the patch level of Solaris & SUN Cluster is not as not this test cluster) is that cacao container agent is offline:
offline Feb_07 svc:/application/management/common-agent-container-1:default
because of that I have following service as disabled:
disabled Feb_07 svc:/system/cluster/rgm:default
Does anyone knows, how serious is this? And how to enable now svc:/application/management/common-agent-container-1:default?
Here is svcs -xv output:
svc:/application/print/server:default (LP print server)
State: disabled since Sat Feb 07 10:42:05 2009
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
svc:/system/cluster/rgm:default (Resource Group Manager Daemon)
State: disabled since Sat Feb 07 10:42:06 2009
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
Impact: 1 dependent service is not running:
svc:/application/management/common-agent-container-1:default
svc:/system/cluster/scsymon-srv:default (Sun Cluster SyMON Server Daemon)
State: offline since Sat Feb 07 10:42:07 2009
Reason: Dependency svc:/application/management/sunmcagent:default is absent.
See: http://sun.com/msg/SMF-8000-E2
Impact: This service is not running.Regards,
Vladimir -
Creation of triggers using CFQUERY tag is giving error
Hi,
I am creating triggers and stored procedure on ORACLE data
base using <CFQUERY>.
<CFQUERY DATASOURCE="CRM">
create or replace trigger AWC_ACCOUNTINGPERIODSID_TRI
before insert on AWC_ACCOUNTINGPERIODS
for each row
begin
select AWC_ACCOUNTINGPERIODSID_SEQ.nextval into :new.AP_ID
from dual;
end;
</CFQUERY>
But the created trigger is not compiled, it is giving the
following error
"Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the
symbol "" when expecting one of the following: begin case declare
exit for goto if loop mod null pragma raise return select update
while with <an identifier> << close current delete
fetch lock insert open rollback savepoint set sql execute commit
forall merge pipe The symbol "" was ignored."
If I edit that trigger in enterprise manager console by
pressing space and compile that, it is working fine with out any
error. If i run the above statement in sql *plus, It is working
fine with out any error. Can you please tell me why this is
happening if i run it using cfquery tag and also the possible
solutions.
Thanks in advance,
VinodI can't tell you why your particular trigger is failing, but
here is some "typical" reasons from Oracle's metalink.
Common reasons for PLS-00103
Error Summary
PLS-00103 Encountered the symbol "%s" when expecting one of
the following (Oerr
LS.103)
Error Details
~~~~~~~~~~~~~
Error: PLS-00103
Text: Encountered the symbol "%s" when expecting one of the
following:
Cause: This error message is from the parser. It found a
token
(language element) that is inappropriate in this context.
Action: Check previous tokens as well as the one given in the
error message. The line and column numbers given in the
error
message refer to the end of the faulty language construct.
PLS-00103 errors can often be difficult to localize what the
error is so here are some
common reasons for PLS-00103 errors..
A very common reason for PLS-00103 is when a reserved word is
used, with a reserved word
means words that names an oracle object or a built in
procedure, for example MOD, ABS,
TABLE, VIEW etc..
When trying to use SQL*PLUS commands in PL/SQL procedures,
like SPOOL, SET and other
commands that belongs to SQL*PLUS can result in this error.
Using parameter declaration at the IN/OUT clause in a
procedure, this works in versions
prior to 8.0.4, but it just ignored the declaration.
Using DDL commands in PL/SQL will fail in PLS-00103, the way
to use DDL commands is
to build a procedure in dynamic sql.
When creating package specification and a package body, a
PLS-00103 error will occur
if there is no slash, '/', after the package specification.
Phil -
Dear experts,
We need to conver uncleared checks from legacy to SAP system. Can someon please explain what would correct approach?
So I need to post a payment document type zp which should also have check number?
What are the tables I should map this object to? Please explain step by step instructions.
Thanks,
SirHi,
There are two approaches and accordingly you can decide which option would be better.
1. If the legacy data is to be brought into SAP by means of upload only for the open items, then you can upload as per the suggestion earlier. Since in this case, the actual vendor or customer wouldnt come into the picture, the cheque lot updation wouldnt be required as the upload would be done for already paid documents in the legacy. Also, the cheque lot in SAP would be maintained for the cheque lot avaialbe (unused) for subsequent processing, the updation of cheque number in the upload documents in the specified field would suffice the requirement for BRS aswell.
2. If the legacy data is to be replicated in SAP, that means duplicating all the receipt and payment transactions inline to legacy, then it would be mandatory to maintain the cheque lot and accordingly post the actual business transactions.
Hope i understood your requirement
Regards
Hari -
Istn't working two buttons.
Hello everybody. I have Nokia n95-2 (8gb is black). My handset has following issue: sudden leave off work two button like key (menu) opposite main key menu and locate nearly red button (for interrupt calling or cancel other activities). I always very cary use my handset and never droped and wet it and also i did every actions such as hard reset and other and those actions didn't carry me success. For me this situation isn't critical because i can replace those button's functions and i don't hurry to carry point but it is unpleasent situation. By the way in addition file which i am attached you can see when buttons aren't working now. Anybody can help me with my problem ?
Attachments:
n958gb3.jpg 62 KBWhat you have written is unclear but from what you've said I would say that the phone has suffered a hardware failure.
We cannot help you repair that here so the care point is an "unpleasant situation" that you will have to deal with. -
CC photoshop + lightroom offer
Not sure this is the right place to get a 'real' response: a response from someone at Adobe who 'knows'. But here goes.
I see there's a new offer till 2 December for the $9.99 (ten bucks) a month offer, open for all, as it should have been from day one.
Does anyone 'know' if the offer for owners of cs3-cs6 till the end of the month, till 31 December, still stands? Has it been taken off the table?
I'm leaving Saturday for a few weeks. Didn't think I'd need to make this decision till I came back. Again, I feel like I've got a gun to my head because of unclear language from Adobe. Because they have changed their minds, again, and again. I'm really fatigued by all this effort. Tired of having to dig for clear info about a product I use for work.
There's conflicting and sometimes ridiculous info circulating like mad on some forums.
So. Anybody got the 'truth', this time, about what is available, what's not available, and the time restraints?
Thanks for any help on this.Hi Bev I have received the Email below from [email protected]. Can you please confirm if the Email is genuine. I suspect it is (given the security alert on the Adobe UK website), but it's not addressed to myself and the incident was over 10 weeks ago !!!!. Adobe Important Password Reset Information As we announced on October 3, Adobe discovered sophisticated attacks on our network involving the illegal access and removal of a backup database containing Adobe IDs and encrypted passwords. We are writing to let you know that your Adobe ID was in the database taken by the attackers -- but, importantly, your current password was not . As a result, we did not reset your password. We have no reason to believe that your Adobe ID account is at risk or that there has been unauthorized activity on your account. The database taken by the attackers came from a backup system that contained many out-of-date records and was designated to be decommissioned. Adobe’s authentication system of record, which cryptographically hashes and salts customer passwords, was not the source of the database that was taken. However, if you use your old passwords on any other websites, you should change those passwords. We also recommend that you follow password best practices to help ensure your current password is secure: Don’t reuse passwords: Your password should be unique to your Adobe ID account. Don’t reuse a password you have previously used with your Adobe ID or a password you are using on any other website. Make sure your password is difficult to guess: Your password should be at least eight (8) characters in length. It should contain a mix of different character sets, such as upper case letters (A-Z), lower case letters (a-z), digits (0-9), and special characters (# $ % & - _ { }). It should not use all or part of your name or your Adobe ID. We deeply regret any inconvenience this may cause you. We value the trust of our customers and are working aggressively to prevent these types of events from occurring in the future. If you have questions, you can learn more by visiting our Customer Care page, which you will find here. Adobe Customer Care
-
Virus or technical problem with Qosmio G30?
My notebook is Qosmio G30-149. When I turm in ON, I see that screen is not 100% black, but it has some small white unclear dots. When Windows logo coming up, the whole screen has 10 white vertical lines (each line made with with something similar to the sign !), then compute get frozen and screeb becomes dark. Id I run Windows in SAFE mode, then it is OK. What is it: Virus or technical problem? My Norman antivirus software does not report any problems with viruses. Please help!!!
Hi,
that sound rather then a technical problem than a virus. A virus is operating more on a operating system level and not before.
After rading your description I would suggest you to bring your machine immediately to a authorized service partner because I assume a serious hardware malfunction.
If you really can see some unclear dots from the startup of the machine till windows with lines appearing after a while then maybe something with your graphics subsystem is not OK.
Grab this link and find a authorized service partner in your country to let do a hardware checkup on your machine:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck buddy.
Greets -
Visibility of folders on two partitions
If I install Windows 8 (64 bit) on a partition using Bootcamp, will the folders in the OS X partition be visible from the Windows 8 partition (and vice versa)?
Mark1940 wrote:
Thank you for your reply to my question. Could I read a file in the other partition? For example, could I read a document in the Windows partition and then save it in the OS X partition?
Unclear question, from where would you be reading the file in the Windows partition, if from the Windows partition then the answer is no. If from the OSX partition the answer is yes.
Many programs won't operate correctly with limited access, and limited access is what you will have. It will become a PITA. -
Turning a Grid Drawing Panel Into a JavaBean
Hello,
I've written a class for drawing a grid in which a user can draw shapes. I want to implement it into my GUI that I've built using the Netbeans GUI builder and it seems the most straightforward way (or so I thought!) was to create it as a JavaBean. I've read the JavaBean tutorial but it seems a little unclear apart from for the creation of the simple bean. I've also had a look at the conventions on wikipedia and modified my class several times to try and get it to be accepted as a JavaBean but with no luck. Are there any other sources of info I could use?
Thanks,
Nick(Thanks for helping me!) Woops! I forgot about this thread.
Well anyway, this is one way. There might be a better way.
Good luck!
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
public class GridPanelTest{
public static void main(String[] args){
new GridPanelTest();
public GridPanelTest(){
panel = new GridPanel();
frame = new JFrame();
frame.setContentPane(panel);
frame.setSize(500, 500);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
public class GridPanel extends JPanel{
public GridPanel(){
this.setBackground(Color.WHITE);
public void paintComponent(Graphics g){
super.paintComponent(g);
Graphics2D gfx = (Graphics2D)g;
gfx.setRenderingHint( RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
gfx.setStroke(thick);
gfx.setPaint(Color.RED);
for(int i = 0; i < numRows; i++){
int pos = (int)(((double)this.getHeight() / (double)numRows) * (double)i);
gfx.drawLine(0, pos, this.getWidth(), pos);
for(int j = 0; j < numColumns; j++){
int pos = (int)(((double)this.getWidth() / (double)numColumns) * (double)j);
gfx.drawLine(pos, 0, pos, this.getHeight());
int numRows = 4;
int numColumns = 3;
BasicStroke thick = new BasicStroke(2);
JFrame frame;
GridPanel panel;
} -
Need to wipe hard drive to restore to previous date from time machine back up. Unclear how to do this. Please advise or provide link to this procedure on website. Thanks.
See Pondini's TM FAQs for starters.
-
From Windows Azure `Edit in Visual Studio Online` ; Unclear On Which Login To Use
I have created a web site in Windows Azure and linked my site to `Visual Studio Online` where I can do automated builds upon checkin and all works.
Now from Azure's dashboard on the site I am presented with the option to edit it in Visual Studio Online:
But then I am confronted with a user authentication page.
Which credentials are to be used?
How are the provisioned exactly?
If they are not a windows live id...why not?
William Wegerson (www.OmegaCoder.Com)Hi,
From the image you provided, it seems like you need credential to sign in ***.scm.azurewebsites.net, please kindly read the following article.
#http://blogs.msdn.com/b/windowsazure/archive/2014/03/04/windows-azure-websites-online-tools-you-should-know-about.aspx
Here is a snippet:
simply browse using your favorite internet browser to https://{site name}.scm.azurewebsites.net (in other words, add
.scm in front of the site name). Upon entry, you will be asked for credentials and those will be the same as your deployment credentials. If you have never set up your deployment credentials, you can open your site’s dashboard
in the Azure Portal and click Set up deployment credentials. If you already have deployment credentials but do not remember them, you can use the dashboard to reset them
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Error InfoObject inactive while activation of Business content for cube
I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same. Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM
-
Automate creation of APEX workspaces from a script
Is it possible to have an SQL batch file create a user and a workspace without going through the web interface?
-
Function module to get GL account statement
Is there any function module to get GL account statement .... ..Thanks .Ashish
-
LIMITED ACCESS | 2504 + 2702 aps
Dear All, We have a the following issue with a 2504 controller in a data center connected to 20 AP in different offices. We are getting complains about "Limited access" and clients are disconnecting randomly. If they then disconnect and connect to th
-
This is something that happened twice. Suddenly, all my GPS data disappeared from the entire catalog. Fortunately, I could recover them from my catalog backup. I can't make out how this could have happened. Did anyone experience the same problem ?