Uncommanded keypad inputs to iPad, and other strange behaviour.

I recently downloaded The Planets and The Elements apps on to my iPad. Since then, on occasions the slide to unlock slider will not respond in portrait mode, but will in landscape mode.
Id addition, intermittantly the ipad starts to respond to phantom keypad inputs. You can see the keys on the virtual keypad responding as if they are being pressed and the random input appearing on the screen. At times sections of tect will highlight and the copy button will flash.
I have deleted the suspect apps, reset the ipad several times, and have done a full restore, but am still experiencing these intermittant phantom inputs.
Has anyone else experienced this and how did you fix it?
this may not be related to the apps mentioned above, but The Elements app was particularly bad, moving between pages at random and uncommanded.

If you're still getting the same thing after Reset and Restore then, sorry, you've pretty much shot your bolt. Call AppleCare and start the process of swapping your busted piece of gear for a new one.

Similar Messages

  • Some of my photos from my iPhone are sinking to my iPad and others are not. I can't work out why this is the case.  Everything seems to be set up correctly.

    Having had an iPhone for some time, I recently purchased an iPad.  Everthing has been set up correctly in terms of iCloud, this was checked by Apple today, the set up in iTunes relating to photos says sync all, again I think this is correct.
    However, some photos from my iPhone taken before I purchased the iPad are sinking to the iPad and others are not.  I have no idea why and would be really greatful for any insights on this matter.
    Furthermore, I have since deleted some photos from my iPhone but these still appear on my iPad and I am unable to delete them.
    Thanks for your help! It's driving me nuts!
    E.

    Open itunes, connect iphone, select what you want, sync

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • HI, I just bought an iPhone 4S. Although my iPad and other iPhone 3GS connect to our server (SBS2003) I cannot get through.  It checks all items in the connection and then I get the message :Cannot get mail, the connection to the server failed."

    HI, I just bought an iPhone 4S. Although my iPad and other iPhone 3GS connect to our server (SBS2003) I cannot get through.  It checks all items in the connection and then I get the message :Cannot get mail, the connection to the server failed."  I Tried everything, rebooting, reset all iPhone, etc.  All Apple devices work perfectly expect mine.  Please advise

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Working with the MS Word iPad and other office apps: Onscreen keyboard will not minimize

    With Microsoft's announcement today of allowing limited editing capabilities in their mobile apps, I installed the updates on my iPad.  So far, everything works great...with one exception:  The onboard keyboard will not get out of the way...won't
    minimize.
    I have last year's iPad Air and was trying to use my Bluetooth keyboard with each of the MS Office IOS apps.  Consistently, across all of these apps, the keyboard would stay on the screen and the key for minimizing the keyboard had no affect, even though
    my Bluetooth keyboard was linked and working.  Any other app I use automatically removes the onscreen keyboard when the Bluetooth keyboard is detected.
    This does make the applications difficult and not much fun to use.
    Any thoughts?  Anybody else notice the same issue?
    My office has begun deploying Office 2013/365 and I know we'll have some users on iPads and other tablets, so I'm real interested in correcting this if at all possible.

    Hi,
    This forum is for general questions and feedback related to Word for Windows, I'd recommend you post your question to the Office on IPad forum:
    http://answers.microsoft.com/en-us/office/forum/office_mobile-word-os_device_ipad?tab=Threads
    The reason why we recommend posting appropriately is you will get the mostqualifiedpool
    of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I'm affraid I lost my "Word" document of 30 pages. I can see only stars,squares and other strange figures. How can I recover this? Please I need help!!!

    I need help! My daughter is busy with her final studyprogram. Her "word" document changed into stars and other strange figures. Is there a possibility to recover this. I hope someone can help her!!!! thanks jvdharst

    Are you using the latest version of MS Word?  It’s possible you can restore the corrupt file from the last saved version or the automatically saved version.  Have you tried that?  MS Word uses a folder called Autorecover to store temporary versions of your file.  Hopefully there’s a good version in that folder.  Use Finder to search for Autorecover if needed.

  • My iPhone wont connect to wifi but iPad and other devices do

    Can someone help...my iPhone wont connect to wifi yet iPad and other iPhone will connect

    Can someone help...my iPhone wont connect to wifi yet iPad and other iPhone will connect

  • My iPad air won't charge.  I have used both the charge cord that came with it, and a second that I bought at the Apple store.  I have used both the charger that came with the iPad, and others that are working with other iPads.  It charged yesterday.

    My iPad Air will not charge.  I have used its original charge cord, and a second Apple lightning cord.  I have used the original charger and others that I have confirmed do work.  It charged yesterday, no problem.

    Before going to the Apple store carefully examine the lightning port to make sure no fuzz or other foreign stuff has gotten in there. There are not that many things that can prevent an iPad from charging. You've tried a different cable, different charger and hopefully the reset suggested by Barry in the previous post. Check for debris and if the port is clear Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Can I create a portable ad-hoc network between an iPad and other wireless devices?

    I have a iPad that uses a third-part app to connect to and read data from a wireless hard drive.  This works great in my house over my local network.   What I want to do is create an ad-hoc network to use in my car or other remote site to basically just allow the wireless connection between the two devices, with no internet connection.   I have used an ad-hoc network in the past to sync data between my iPad and my iMac, so theoretically it should be possible, but I can't seem to find out how to do it using the iPad to create the network.  Is there a support article discussing this?   Has anyone out there tried doing this?   Any help would be appreciated.

    Thanks for the reply, but I must not have made myself clear.  I'm not looking for internet or 3G service.  All I want is a temporary network to share data over.  I have lots of movies and videos stored on a wireless hard drive and I just want to be able to access them in the car while on trips or on vacation.  It works in my house even when we lose our internet connection.  The cable modem is off-line and the Airport Extreme light glows orange, but the wireless network still works.  I guess that I could set up an iPhone as a hotspot and pay extra for a service I would only need sporadically, but I'm hoping that there is an alternative.

  • Is there a way to separate podcasts that I'll go to the iPad and others that'll go to the iPhone and be able to auto sync with iTunes?

    So far the only way I'm able to pull that off is having the "sync podcast" on the iPhone and iPad turn off, otherwise everything on iTunes goes into both devices and is a real pain in the...

    That's actually what I'm currently doing... but the problem is that by doing so I have to manually delete the podcasts I already heard on my iPhone on iTunes again... because the "sync podcasts" option on the iPhone and iPad is off, if I turn that on... all podcasts go in all my devices, and I like to keep podcasts for iPad and iPhone separate.

  • APEX Listener and EPG - strange behaviour

    Hi
    For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
    I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
    After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
    Before I did so I checked that my applications still worked in 4.1 and they did.
    However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
    Configuring APEX Listener and running the same application through that DOES display the images.
    So this part of the application works under APEX Listener but not under EPG.
    My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
    So this part of the application works under EPG but not under APEX Listener.
    Has anyone else come across different behaviour depending on the mode of connection?
    Thanks
    Brian
    [Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

    Hi Brian,
    it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
    At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
    Some parts of your initial post hint to that direction, e.g.
    However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
    However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
    My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
    For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
    For the moment, I still think the port conflict is my best guess.
    You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
    -Udo

  • System Preferences can't set date and time and other odd behaviour

    I have a 2008 Macbook Air, which is beginning to show signs of age, but now appears to have taken on a terminal problem.  I can't set the date and time in the system preferences, even when connected to the internet - the pane just comes up as faded out and I am unable to do anything. The problem started after I accidentally allowed the battery to run down without having shut down the computer and it automatically assumed a date of 1 Jan 2001. I am unable to perform any updates on the machine until the issue is resolved, according to software update.
    Other strange things that have happened are that the trackpad no longer responds to the 'tap to click' function or 'two finger' click. In system preferences, I cannot edit energy saver, network (advanced) or account settings - attempting to do so brings up more faded panels or an error message after failure to load.
    Has anyone seen similiar behaviour on their mac or have suggestions as how I might resolve the problem?
    Thanks!

    If this is recent, what has changed since the last time D&T worked correctly?
    I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPhone " where it may get a more rapid response from your fellow users.
    ÇÇÇ

  • "Print" to pdf function missing in Word and other strange print behaviour

    I'm trying to narrow down an issue I'm having with printing. I just noticed that the ability to creat a pdf in Word (print -> save as pdf) has disappeared. The button is now gone for some strange reason. I also noticed when trying to print a Keynote outline, when selecting ColorSync (print -> copies and pages [click and select ColorSync]) all my choices are gone (grayscale, b&w, etc.). Something's obviously wrong, but is it my printer software (HP 7310 aio) or OSX? My guess is the two issues are tied together.
    Also, I haven't added any new software to my computer and all software updates have been installed.
    Thanks in advance for any help!

    I have no idea whether this will help you or not, but IF some system software somewhow got corrupted, it should help.
    1. Download either OS 10.4.10 COMBO update for Intel or OS 10.4.10 COMBO update for PPC
    2. Run disk Utility Verify Disk
    3. Run Disk Utility Repair Permissions
    4. Reinstall OS 10.4.10 from the combo installer that you downloaded in (1).
    5. Run Disk Utility Repair Permissions
    6. Run  Software Update to make sure you have all the security patches that were released since the COMBO update was released.
    7. If you got downloads in (6), run Disk Utility Repair Permissions
    8. See whether you are working now

  • My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

    Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • JavaFX with iPad and other Tablets...

    Hi,
    can i run JavaFX code on iPad4 and iPhone ?? on other tablets like Nexus - Galaxy ...
    How can i make programming on iPad -iPhone using Java and JavaFX ??
    it seems that no intersection between iPadiPhone and Java ..? Really ??
    Many thanks

    jsmith wrote:
    A tablet you built yourself using a Raspberry Pi or Beagleboard (using embedded JavaFX preview releases) => Yes.Lol, now that's a complete list :) I'm going to start listing "stuff you built yourself" too.
    >
    no intersection between iPadiPhone and Java ..?CorrectThe blame is of course to be placed upon Apple and all their rules (yay lets all program Objective C and basically be forced to resort to low level C also, because I say so), and Google for basically ripping Java for their own purposes and thus breaking up what could have been a thing of beauty. Hopefully in a couple of years Dalvik will be as good as the JVM built into Java 5 :/

Maybe you are looking for