Undefined is not an object error when using the Output Generator with Glossary Restyling script to create WebHelp

When I use the Glossary Hotspot Wizard to create links within my topics to the terms, I then generate the project using the script (because I want to use popups instead of having the text display in-line). I did not edit this script before running it - do I need to? If so, where does the script reside? Any suggestions would be appreciated so that I can get this working as intended :-).

The error occurs during the WebHelp generation. If I generate the project
without using this script, there is no error.
The error indicates
Line no: 395
Thanks!
Julie
Julie Haddon-Cook
Senior Specialist
Messaging Engineering
Direct:      +1 770 303 3507
CVS:         224 3507
Address:   SITA | 3100 Cumberland Blvd | Atlanta, GA 30338 | USA
Website:   www.sita.aero

Similar Messages

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

When using the Save Layer Comps to PDF Script, can you change the PDF settings. I need both Smallest File Size and Press Quality?

When using the Save Layer Comps to PDF Script, can you change the PDF settings. I need both Smallest File Size and Press Quality? Thanks in advance to the group for assisting with this matter.
— John

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Undefined is not an object error message

Hi there.
I'm just new to scripting in illustrator. actually, i'm new to illustrator too!
but i do have a programming background. right now, i'm just trying to familiarize myself with scripting for illustrator files.
i have an svg file that was created by our artist. i've opened that file in illustrator. i've also opened a sample javascript from adobe called "makelineargradient" and i'm trying to run this script against the svg file.
it worked fine the first time. but on subsequent compiles / runs, i'm getting the error message "undefined is not an object"
the line it's failing on is line 1:
if (app.documents.length > 0)
can someone point me in the right direction? I'm using the extendscripts tool to open and run the javascript file.

Be sure that you are targeting Illustrator, and not the Extendscript application (there is a dropdown menu at the top left.). I'll bet that yours is still set to Extendscript (it will default to this when opened.)
Also, you can add the line:
#target illustrator
at the beginning of the code to set Illustrator as the target.

TypeError:undefined is not an object message when opening a new window in Bridge

Every time I open a new window in Adobe Bridge CS6, I get a long error message that says
"TypeError: undefined is not an object: onResize()buildUIStack(true,"Cabinet")buildUIStack([TabbedPalette:[objectTabbedPalette]], true,"Cabinet")switchTo([TabbedPalette:[objectTabbedPalette]],[Group:[object Group]],true)AmgDesignWindow([TabbedPalette:[objectTabbedPalette]],[Group:[object Group]],true)populate([Group:[object Group]],true)"
I'm running OS 10.8.5. I've tried uninstalling and then re-installing CS6 but I still get this error message. Once I click OK, a new window will open. I just want to know how to stop this message from popping up every time I click "new window".
Any help is greatly appreciated.
Thanks!

It could also be a bug in OS. Did it work before? If so reset preferences. Hold down Option key and start bridge. You should get a reset window.

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

Error when using the Open file block

I'm new to labview programming and am having the following problem:
When trying to open a file ".dat" in Labview 6i it from the program ".vi" and appears "Error 7" and the file does not open. I am using the block "Open file". Attached is a screenshot. How to solve this?
Thanks
Attachments:
imagem.jpg ‏1535 KB

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

"Object Required" error when using the script block from the code behind

I try to use the following script block on the code behind page
<script defer='true' id='NavID' type='text/javascript'>Nav();</script>
and the function Nav() is on the .aspx page. It gives me the "Object Required" error message. BUT if I add an alert("hello!!!") line inside of the Nav() function, it works fine after the user closes the alert box. Has anyone experienced a similar problem? Please help. Thanks.

There is no way to troubleshoot this by looking at a picture of the diagram. LabVIEW 6 is almost prehistory and many things have changed, especially the file IO all looks different so it is impossible to tell what you are doing.
Error 7 is file not found, so most likely your string operations are not correct. What are the full strings? What is the final file name (maybe you are missing a "\" or maybe you are on a different OS type). Put an indicator at the path wire to see what's happening!
Is this a datalog file?
(Overall, the code is a bit suspect. Nobody needs a seven frame flat sequence. ) Why do a control and an indicator have the same label?)
LabVIEW Champion . Do more with less code and in less time .

Response format error when using the ASCII object to communicate with a Dart ASPII motor controller.

I can't seem to get Lookout to work using a COMM RS232 connection to our Dart controller. When using a term program, i'll send the command RV1,0,6 and get the response 1000,0005. I set up the ASCII object in Lookout with the following:
SEND=Pb5
RequestFormat="%s"
ResponseFormat="%s" (and many other combinations)
RQV1.TXT=TextEntry1
for TextEntry1 I enter RV1,0,6 and I always get that dang response format error!
Any suggestions? Obvious goofs?

What's the Expression you're inserting to read back the response? If you're using just RSV1, you'll get the error. Try RSV1.txt.
For troubleshooting purposes, delete all RSV expressions and the ResponseFormat connection and insert just an Expresssion on ASCII1.Response (where ASCII1 is your Object). This will give you the raw ASCII frame coming in. Then you can start formatting this raw response with appropriate ResponseFormat and RSVs.
Hope this helps,
Khalid

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

Undefined is not an object error when using the Output Generator with Glossary Restyling script to create WebHelp

Similar Messages

Maybe you are looking for