Undeliverable messages. Error is [0x80040107-0x80040107-0x000501]

User reported undeliverable messages, sent to external email addresses.  All bounced back messages have the same notification message:
"This message could not be sent. Try sending the message again later, or contact your network administrator. The client operation failed. Error is [0x80040107-0x80040107-0x000501]"
I am trying to track down the error codes and have found nothing on this particular code sequence.  Is there a Error code guide that might provide some insight?
Thank you

Jesper,
Thank you for the response, sorry it took so long to get back.  I am trying to track down any documentation that might tell me what this error code is:
[0x80040107-0x80040107-0x000501]
However, here is the information you asked about:
Machines: Windows 7 Enterprise SP1, 64bit
Outlook Client: Outlook 2013 (15.0.4667.1000) 32-bit, Symantec Outlook Integration Disabled, mailboxes partially cached (1month)
Exchange Design:Exchange 2013 SP1, Win 2012 server 1 DAG, F5 load balancer, serving up autodiscover and email connectivity. Client not local to the Exchange servers, connected by 3x 10MB links
Single user reported issue emailing to 2 external email accounts.
Let me know if you need more informaiton
Thank you
Stephen

Similar Messages

  • Undeliverable mail - error message

    When I try to send mail, I get an Undeliverable mail error message/response. I don't know if it makes a difference if I select the me.com or mac.com as my outgoing server. I also work at a university, but I don't think that should be a problem since this just surfaced today. I've posted some additional technical details below. Has anyone else experienced this problem recently?
    Error message details:
    SMTP module(domain mac.com) reports:
    host smtp-mx2.mac.com says:
    550 5.1.1 unknown or illegal alias
    Reporting-MTA: dns; regor.[myuniversity].edu

    First of all test the other mail host. Do nslookup on the mx record for the domain. Maybe also check it from somewhere else on the internet to make sure your dns server doesnt still have an old entry cached. Once you know dns is going to the right server, try to telnet to port 25 on that server to see if you can connect to the other mail server and get a header back. If you want you could go a step further and send a message via command line but not usually necessary.
    If that server seems fine, look at your own mail server. Check dns, delivery to other addresses etc..

  • Outlook Error Code [0x80004005-0x80004005-0x000501]

    There are a couple of users on our network getting this error.
    Outlook Error Code [0x80004005-0x80004005-0x000501] when they use Outlook to send messages.  This is a recent occurrence.
    I need to know what to fix.
    Patricia Startz

    Hi Patricia,
    What's the version of your exchange ?
    Base on my search, Exchange 2010 SP3 RU8 will cause this issue.
    If you had installed exchange 2010 SP3 RU8, you should rollback this update.
    The following has been posted onto the Exchange team site:
    http://blogs.technet.com/b/exchange/archive/2014/12/09/exchange-releases-december-2014.aspx
    Update 12/10/2014:
    An issue has been identified in the Exchange Server 2010 SP3 Update Rollup 8. The update has been recalled and is no longer available on the download center pending a new RU8 release. Customers should not proceed with deployments of this update until the
    new RU8 version is made available. Customers who have already started deployment of RU8 should rollback this update. 
    The issue impacts the ability of Outlook to connect to Exchange, thus we are taking the action to recall the RU8 to resolve this problem. We will deliver a revised RU8 package as soon as the issue can be isolated, corrected, and validated. We will publish
    further updates to this blog post regarding RU8. 
    This issue only impacts the Exchange Server 2010 SP3 RU8 update, the other updates remain valid and customers can continue with deployment of these packages.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • I send an email to several people and I get an undeliverable message, how do I know which one is undeliverable

    I send out a news letter for the Lions Club and involves 30 different people. Sometimes I get an undeliverable message and I don't know which address did not get delivered. How can I find out which one was not delivered so I can make sure I have all the correct data.

    Don't you get a full report? the message text look like this from my isp.
    The following message to <[email protected]> was undeliverable.
    The reason for the problem:
    5.1.0 - Unknown address error 550-'5.1.2 <[email protected]>: Recipient address rejected: Domain not found'
    Reporting-MTA: dns; ipb1.telenor.se
    Final-Recipient: rfc822;[email protected]
    Action: failed
    Status: 5.0.0 (permanent failure)
    Remote-MTA: dns; [213.150.xxx.xx]
    Diagnostic-Code: smtp; 5.1.0 - Unknown address error 550-'5.1.2 <[email protected]>: Recipient address rejected: Domain not found' (delivery attempts: 0)

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Installing Adobe Photoshop 10. Using Windows 7 and IIE.  Get message "error:1"

    Installing Adobe Photoshop 10.  Using Windows 7 and IE.  Gt message  "error:1"

    Not sure what CS3 is.  Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
    Looks like I can't attach a Word or PDF document or paste an immage.
    This forum may not be very user friendly.
    Let mehttp:// know if there is another way to communicate.
    Thanks,
    Phil
    <Removed by Moderator>

  • Backup message error -SAP system is running or SAP user is connected to dat

    Hello ..
    when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
    BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
    BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
    BR1025I Please shut down SAP system first or use the 'offline_force' option
    BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
    BR0054I BRBACKUP terminated with errors
    [Major] From:  "OMNISAP" Time: 08/08/10 05:31:49
    BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
    i am new on this, what should i review into the db?
    Regards and thanks in advance
    Dma.

    Hello Daniela,
    you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
    This is also described in the official documentation:
    http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
    offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
    Regards
    Stefan

  • Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

    Hello,
    I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
    I tried to install the software via the HP website. It's not working.
    Can someone help me with this one ?
    Thanks,

    HP Print Drivers

  • I'm trying to download a movie, but I keep getting message error that I have no more room and that I must delete some photos or videos in order to download more movies. How do I delete the videos in order to order more?

    I'm trying to purchase and download a movie, but I keep getting message error that I have no space. The error states that I must delete some photos or videos in order to download. I've gone to iPod then edit and deleted some videos, but I'm still getting the message. What is the correct way to delete the videos and should they still be there.

    They wont still be there if you delete them,but if you have those same photos on the main computer.

  • Cannot open itunes receive message Error 7 (Windows 127)

    I attempt to open itunes but receive the message Error 7 (Windows 127)
    I am running Windows 7 Home Premium.
    Have been running Itunes for several years using various iphones, at present on 4S and an Ipad 4.
    I have several times uninstalled Itunes, and at the suggestion of support all programmes associated with Itunes, but when I have reinstalled and attempt to start the programme I get the same response.

    Hello veijoverde,
    Thanks for the question. After reviewing your post, it sounds like you are having launch issues with iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Need suggestion on  implementing JMS message error recovery

    Hi,
    Our application has a JMS topic where we publish application events. Now, there can be scenarios where the consumers cannot process the message due to some infrastructure issues and would error out. We need a way so that those messages can be reprocessed again later. we are thinking of the following design for JMS message error recovery
    1. Use a persistent TOPIC (this would ensure guaranteed delivery)
    2. Configure a error destination on JMS topic e.g a jms queue
    3. Have an error handling MDB listening to the Error destination. An error handling MDB would dequeue the errored messages from error destination and persist it to a Data base "error" table..
    4. Provide a mechanism to republish those messages to topic (e.g a scheduler or admin ui or a command line utility) .. The messages would deleted from database "error" table and published to topic again....
    A. Are there any issues with the above design which we need to handle?
    B. Are there any additional steps required in a Cluster environment with a distributed topic and distribute error destination? (our error mdb will have one-copy-per-application setting)
    B. From a performance angle, Is it OK to use persistent TOPIC ? Or will it better to persist the message to the db table and then publish it as a non persistent message ... ? (But i guess the performance should be more or less the same in both of these approaches)
    C. Are there any other recommended design patterns for error recovery of JMS messages
    Please advise.
    Regards,
    Arif

    Thanks Tom !
    We may not be able to go with the approach of delaying/pausing redelivery of the messsage because
    1. Pausing entire MDB approach: Our MDB application consumes messages generated by different producers and our MDB needs to continue processing the messages even if messages corresponding to one producer is erroring out
    2. Redelivery delay : This would only delay the retry of an errored message. But there would still be a problem if the message fails during all retries (i.e redelivery limit count). We don't want to lose this message. In our case, It is possible that a particular message cannot be processed due to unavailability of a third party system for hours or may be a day.
    Basically, i am looking on approaches for a robust and performant error recovery/retry framework for our application (refer details in my first post on this thread) while fully making use of all features provided by middleware (WLS). Please advise.
    Regards,
    Arif

  • When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

    Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
    I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
    Thank you in advance
    Best regards
    Alexei Soloviev

    Hi Steve
    I have problems with the 34401A and serial communication. Do you remember
    where the error was in the code ?
    Thanks
    Klaus
    wrote in message
    news:[email protected]..
    > Alexei,
    > This may or may not help, I was tasked to do something similar
    > recently and found an error in their driver. The GPIB VISA worked
    > fine, but when I tried it on serial it played up. There was an errant
    > carriage return (or CR/LF I can't remember). GPIB liked one and Serial
    > liked the other. It always amuses me that we never have problems with
    > Quickbasic!.
    > If you want me to dig deeper give me a shout.
    >
    > Steve Watts
    >
    > On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
    > wrote:
    >
    > >When trying
    to work with Agilent 34401A multimeter (serial RS-232
    > >connection), HP34401A Getting Started.vi gives always the message:
    > >"Error 1073807369 occurred at Old VISA Open ".
    > >
    > >Baud rate and parity are set correctly, RS-232 cable is also connected
    > >correctly. My QuickBasic program has no problems to read and write to
    > >the Multimeter. It is obviously a software problem: the same error is
    > >persistent if I disconnect RS-232 cable.
    > > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
    > > digital.ni.com and installed it. But it did not help.
    > >Thank you in advance
    > >Best regards
    > >Alexei Soloviev
    >

  • Cannot open Firefox due to this message: Error: Platform version "6.0.2" is not compatible with minVersion =6.0.1 maxVersion =6.0.1

    I cannot open Mozilla Firefox. Instead, a XULRunner dialog box appears with the message: Error: Platform version "6.0.2" is not compatible with minVersion >=6.0.1 maxVersion<=6.0.1 edit
    Can you please tell me how to solve this problem? I have been running Mozilla Firefox on my Dell laptop with Windows 7 os.
    Thanks

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • Downloaded firefox 5.0.1 last night, worked fine, Turned computer on today, Mozilla Firefox, it won't start. Get error message, Error: Platform version '5.0' is not compatible with minVersion =5.0.1 maxVersion =5.0.1" What do I need to do to fix it?

    We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?

    The updater wasn't able to update all the files and some were left as older versions.<br />
    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message.

    When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.

    You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
    tt2

Maybe you are looking for