Under "Basic" in the "Printer Settings" of the Print menu, the dropdown menus for both "Page Setup: Sheet" and "Media Type" are frozen.
Frozen selections: I'm working from my Intel iMac trying to print (from both Aperture and Photoshop CS5) to my new Epson 4900 printer. When the Print menu comes up, under the "Basic" section of the "Printer Settings" the dropdown menus for both "Page Setup" and "Media Type" won't activate. All other options and selections work fine. Just these 2 are not functioning. What's up with that??
Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!!
Similar Messages
-
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss
What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelpHi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM -
How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.
Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4. Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!
To: ~graffiti
(This email is not intended to go on public forum -- but I wanted to respond
to you)
Thanks for your reply....FYI...I was trying to download from www.adobe.com on
the specific page that has downloads of your products. As far as the
alternate source is concerned I am not totally sure what the capabilities it has as
I am recovering from a hospital stay and had to send my wife to retailer to
pick this up because I am accessing email from home until I return to work and
need something to work now. I don't yet have the SW. (I would have had her
buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
Regards,
Staurt Rednor ("Stu") - [email protected]
===========================================================
Subj: New message: "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader"
Date: 4/5/2009 7:38:17 PM Eastern Daylight Time
From: [email protected]
Reply-to: [email protected]
To: [email protected]
Sent from the Internet (Details)
SGuitar43,
A new message was posted in the thread "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader":
http://forums.adobe.com/message/1867664#1867664
Author : ~graffiti
Profile : http://forums.adobe.com/people/~graffiti
Message: -
The basic sliders disappeared. Including the Exposure, Contrast, Highlights, Shadows, Whites, Blacks, Clarity and Vibrance Sliders are no longer available. I need help to get them back on the program.
I can't figure out where the sliders went and how to put them back on. Anyone have any suggestions?
ThanksIn Lightroom, go to the Window menu, select Panels, select Basic
-
I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.
Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy -
How to use the same keypair for both encrypt/decryprt-SunPKCS#11
Dear All,
Subject: To access iKey 2032 token, to retrieve public/private key from iKey 2032 token using pkcs#11 in sdk1.5, to encrypt/decrypt files.
When I separate the encrypt and decrypt part of java program, encryption program works well, whereas decryption program does not decrypt anything in the decrypt file (But there is no error). I printed out the public and private key in both encrypt and decrypt part of java program, its displayed differently::
Encrypt program:
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 10, session object)
modulus: 114338469922835728259534620463489934081917342509275191892563243582065
74380495029336519036972702864998634664269499641616889325482699399559620370181624
72068116957594402738459932902481604823224406859575930392708524033619120886256353
58738237376491107769961041015109436347533548940674900728805627968145581222172729
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 11, session object, sensi
tive, unextractable)
Decrypt Program::
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 12, session object)
modulus: 138556361758970660122782926386849783732271581948935425587968692317930
09262429353977097956605140384961825974398004270547046620971835394362397699233738
54481804748731546655197744692886754946373745924825650876065903334173666990347814
83727290962956934521650035029131176614982652900659797194703065074407857754883163
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 13, session object, sensi
tive, unextractable)
I suspect that every time program generates different set of key, therefore we need to store the generated key during encryption part (i believe it is to be in the keystore) and to use the same for decryption part. Could you please give me a tips how to do this?
Encrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
cp.init(cp.ENCRYPT_MODE,kp.getPublic());
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Decrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Decrypt.
public class Decrypt
public Decrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in1 = new FileInputStream("C:\\ReportDBAE.properties");
FileOutputStream out1 = new FileOutputStream("C:\\ReportDBAD.properties");
Cipher cipher=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
AlgorithmParameters algParams = cipher.getParameters();
cipher.init(Cipher.DECRYPT_MODE,kp.getPrivate(),algParams);
CipherInputStream cin1=new CipherInputStream(in1,cipher);
byte[] input1=new byte[8];
int byteread1=cin1.read(input1);
while(byteread1!=-1){
out1.write(input1,0,byteread1);
byteread1=cin1.read(input1);
out1.flush();
in1.close();
out1.close();
cin1.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(InvalidAlgorithmParameterException iape)
System.out.println("Invalid Algorithm ParameterException " + iape.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Decrypt tl = new Decrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Configuration file::
name = rainbow_token
library = c:\winnt\system32\dkck201.dll
attributes(*,CKO_PRIVATE_KEY,*) = {
CKA_SIGN = true
attributes(*,CKO_PRIVATE_KEY,CKK_DH) = {
CKA_SIGN = null
attributes(*,CKO_PRIVATE_KEY,CKK_RSA) = {
CKA_DECRYPT = true
}Hi all,
Now i manage to use the same keypair for both encrypt/decryprt-SunPKCS#11. Below is my code woks well. In my code i hard coded alias name of certificate, did anyone knows how to read alias name of certificate from iKey token 2032??
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
String myAlias = "349eefd1-845b-4ba4-9f88-06e9f5cb82f6";
/** to view alias name
keytool -list -v -keystore NONE -storetype PKCS11 -storepass PASSWORD
Security.addProvider(p);
KeyStore ks = null;
PrivateKey privKey = null;
PublicKey pubKey = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
java.security.cert.Certificate cert = ks.getCertificate(myAlias);
Key key = ks.getKey(myAlias, pin);
if(key != null) {
System.out.println("key class: " + key.getClass().getName()); // -> sun.security.pkcs11.P11Key$P11PrivateKey
System.out.println("key bytes: " + key.getEncoded()); // -> null!!!!!!!
if(PrivateKey.class.isInstance(key)) {
privKey = (PrivateKey)key;
System.out.println("algo: " + privKey.getAlgorithm()); // -> RSA
//Signature rsasig = Signature.getInstance("SHA1withRSA");
//rsasig.initSign(privKey);
//rsasig.update(data.getBytes());
//byte[] sigBytes = rsasig.sign();
pubKey = cert.getPublicKey();
//System.out.println("signed bytes: " +sigBytes);
//return sigBytes;
//KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
//KeyPair kp = kpg.genKeyPair();
//KeyPair kp = kpg.generateKeyPair();
//kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
//cp.init(cp.ENCRYPT_MODE,kp.getPublic());
cp.init(cp.ENCRYPT_MODE,pubKey);
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
ike.printStackTrace();
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
catch(UnrecoverableKeyException unrke)
System.out.println("Unrecoverable Key Exception " + unrke.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Your help is very much appreciated!!!! -
I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?
Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect. -
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper? The same thing with my iPad mini
Try restarting all devices including portable iOS ones and your router.
Check Airplay is not disabled in AppleTVs settings.
AC -
I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.
Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
What r the trns code for maintenance view, help view and projection view
hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari<b>What is the Different Types and Usage of Views
The followings are different types of views:</b>
- <b>Database View (SE11)</b>
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- <b>Help View ( SE54)</b>
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
-<b> Projection View (SE11)</b>
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
<b>- Maintenance View ( SE54 )</b>
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish -
I would like to know what is the default timouts for wired/ wireless devices ..and how to reset it on Extreme. Many thanks
Wireless is "always on" with the AirPort Extreme. There are no settings to "time out" wireless on the AirPort Extreme. Those settings would be adjusted on each individual computer.
-
I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
Maybe you are looking for
-
hi there, I have been using bootcamp with windows on my macbook for a number of months without issue. I've now got a problem as follows. When I try to boot my macbook it no longer boots at all, after a few minutes I get - - a black screen with a wind
-
After upgrading to the Mobileme, I attempted to publish a new blog entry. iWeb failed to recognise the login id, and my mac would even logout from Mobileme. As per suggestions from this forum, once I un-ticked 'Comments' from my blog, my website is a
-
OK, I killed it... any suggestions? - topcase replacement issues
I'm really hoping someone can help... I was given a 400 mhz powerbook 2 years ago which needed a new top case (broken from being dropped), which I successfully used since then. I bought a replacement top case from ebay (used), which looked to be in f
-
Hi Friends, I want to display the approval preview for shopping carts and the follow on documents as a table by default. Can you please let me know where to make the changes? Regards, Kumar Edited by: Kumar on Apr 10, 2008 9:45 AM
-
The "reload" problem happens when I first load Firefox with "MY YAHOO" as home page.