Under ess wdAbap role

hi frnds,
we already installed the ess/mss ehp5 components in portal 7.01 ehp2. We have seen only overview,appraisal document , processes & forms iviews & pages under ess wdABAP role. I dont get any another iviews under this role. What about another iviews ?we want to implement the standard ess/mss applications to our client. r there any another components installation required? plz suggest me. our back end is Ecc 6.0 EHP5.
waiting for ur valuable replies
Thanks & Regards
veeranji

thank u siddhardh for your promt reply.
can you provide any document how to add services to HR MENU. and coming to portal r there any changes in configuring ess/mss? Previously we are activating JCO's and assign roles to users. But now we don't get jco's also after installing ess 1.50 components. I think no neccesity to activate the JCo's? If i am wrong, what should i do ? suggest me.
Thanks & regards
veeranji

Similar Messages

Custom ESS/MSS ROLE under ADMININTRATION workset - How to approach?

HI
Dear
ESS/MSS Experts,
We have a requirement with our client for a custom development ESS/MSS ROLE under ADMININTRATION workset for the functionality.
ADMINISTRATION(workset)
This workset provides administrative information regarding an employee. The services available under this workset are:
INBOX(service)under--->This service will show the SAP inbox for an employee. The details shown on the screen are,
u2022     Inbox
u2022     Outbox private
u2022     Shared
u2022     Resubmission
u2022     Trash
how can i implement in portal...
I am New From Portal consultant so kindly please help me its very much helpful.
Regards,
Rafi Shaik

inbox you meant UWL ie universal worklist
first note that SAP provides standard roles and you can copy it to z role and modify it accordingly and remove the roles
as per required/
For ESS, the standard composite role is SAP_EMPLOYEE_ERP. You can make a Z copy of this role and customize it per your needs.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a4/93554056bd1f24e10000000a1550b0/frameset.htm
There is no standard role provided for MSS applications. You will need to build one as per your needs.
See SAP Note 844639 for more details.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a4/93554056bd1f24e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq

How to incert custom leave application IView under ESS overview?

Dear Team,
We are developed custom leave application like Work & Time & now that displaying at work set row
My client requirement is Custom leave application should also display under ESS Overview with iView pic along with other iView’s.
Please share the your valuable suggestions on this
Thanks,
Srinivas

What's the type of appilication you have developed, is it WDABAP based or ...
Ask your portal consultant to create an iview for your application based on your application type (I.e WD ABAP/Transaction code etc) and assign that to page and then under role of ESS for Work & Time workset in portal content admin.

ESS & MSS Role

Hi Experts
How to map ESS & MSS roles to ECC 6.0 Roles in EP.
Say for example in ECC 6.0 we have a user A and User B.
User A have some addtional attributes and User B does not have it
How to map this two users in EP.
Thanks
Daya.
Edited by: daya damu on May 27, 2008 8:27 PM

Hi Daya,
You will have to do the user mapping,
It can be done in two ways,
1. Go to user administration and once you enter user A, you will have an option of "User mapping".
2. When you are logged onto the portal, click, personalize option and choose "User Mapping".
User mapping is basically done when the portal users and ECC users are different.
Let me know if you need any further clarification on the same.
Cheers,
Sandeep Tudumu

Enable 'Mobile Phone' and 'Telefon at work' under ESS-SAP -Enterprise Portal (SAP-EP)

Hi,
I want to enable the IT0105 subtypes Communication ID i.e. 0020 and MPHN for users to be able modify this data through Portal. While I am aware of a telephone number field being available already under ESS- Address Information, would it be possible to record the users telephone at work and mobile phone at work through any standard options?
Is there a possibility through FPM anywhere? We are looking for a non-customizing option and any possibility to avail this option through Standard or minimum customizing would be really helpful.
Could anyone here please provide your inputs on this case.
Warm Regards,
Vinay

Yes it is possible with configuration in EHP6 and later with subtype specific UIBBs. See Exciting Enhacements to ESS Personal Information Profile in Enhancement pack 6 for details. This discussion thread belongs to the SAP ERP HCM Employee Self-Service space.

Not able to view the 'proxy-to-remote' iView under 'user admin' role

Hi All,
I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
I am using the portal version EP 7.0.
Can anybody help me .
Thanks & Regards,
Amit Kade

Hi, Amit
u have to assign the one iview in User-Admin role
Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
and this iview assign to user admin role the u can able to see.
if its solve please give me 10 points
thanks & regards
chitta

Need to save the query under the correct role

Hi Experts,
I need to save the query under the specific role. So is there anyway to find the query location by role??
Thanks
Regards,
Arpan

Hi,
RSZCOMPDIR --> RSRREPDIR -->AGR_HIER
From RSZCOMPDIR get all the entries of queries.
compid is query name, take compuID and pass to RSRREPDIR.
get genuniid and pass to AGR_HIER's sap_guid.
AGR_NAME in AGR_HIER is role name.
please check this.
-Sriram
Message was edited by: Sriramvijay R
Message was edited by: Sriramvijay R

R/3 Security roles versus ESS Security Roles?

Hello Experts,
I am not a security person, but we are in the process of testing ESS and having some conflicts with a users GUI (r/3) role versus the ESS role! For example, a user will not have access to Bank Information (Infotype 9) in the GUI, but will need access to edit this Infotype through ESS on their own record.
Our problem is how do we set the roles up under this scenario? If this cannot be done, how do other companies handled this scenario?
Any direction will be highly appreciated.
ECC 6.0
EP 7.0
ESS 1.0
Thanks for your time,
Mike

Hi Mike,
My suggestion would be to make use of P_PERNR in your ESS role only - and not P_ORGIN or P_ORGINCON.
We added all the info types that the ESS users are supposed to maintain or view in P_PERNR.
We did eventually need to add display and matchcode search for info types 0000 - 0002 so that the ESS users could make use of the Who's Who functionality in order to search for emloyees across the organisation.
Without info type 0009 in a P_ORGIN or P_ORGINCON auth object, the users will not be able to maintain in PA30.
Hope this helps.
Regards
Lucille

ESS Customized Role - iView appearing twice

Hi Experts!!
We have created a new ESS role which has a customized Travel & Expenses workset (page and iview also cust). When we assigned this new role to a user, we see that when clicked on Travel & Expenses it is showing the page with two iview (it is assigned so - Travel & Expenses and My Alerts) with all subareas. Now I enter into My Trips under Travel & Expenses and from there Exit. Now it is showing only Travel & Expenses (but not My Trips) and that too twice...one below the other.
I have checked configuration in R/3. it seems fine. Can somebody suggest me where it went wrong? Am I missing something?
Your help is highly appreciable. Thanks a lot.

Assigning to several groups should not affect in anyway, as far as i know.
However, the issue is resolved. In SPRO, under Resources, we have a checkbox PCD Page Static. This was unchecked. Just on trial and error basis, I checked it and tested and surprisingly this worked. As I was not sure about the significance of this check box, I never bothered about this. I will try to go through the significance of the same.
Thanks to all.

ESS Composite Role Adjustment

Hi Experts,
I have been trying to modify the Composite role SAP_EMPLOYEE_ERP for some functionality on portal. In tx OOAC, P_PERNR switch is activated (changed to 1) before this. First of all, I do not know whether the switch should be activated for ESS. But activation worked for me, and was able to get rid of one error. I followed this document for activating <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/94/b8b83b5b831f3be10000000a114084/frameset.htm">P-PERNR</a>.
I followed the guide lines in the help link, and made some changes in the
HR Master Data Personal number Check in the role Z_SAP_ESSUSER_ERP. I added the following profile:
Authorization Level: W (write access)
INFOTYPE: 167 (Health plans)
Interpretation of Assigned Authorization: E (excludes the right access)
Subtype: BMER
I feel that should do trick: the user should not edit the Health Plan BMER on portal. Is it the right approach? It should overwrite the standard profile
Authorization Level: *
INFOTYPE: 0002, 0005, .............., 0167, 0168, 0169, ......
Interpretation of Assigned Authorization: I
Subtype: *
Any suggestions will be greatly appreciated.
Thanks!

Christopher,
Ok.
I managed to achieve the requirement. I am keeping the thread here as I do not know how to move threads.
This is what I did.
1. Authorization Level: W (write access)
INFOTYPE: 167 (Health plans)
Interpretation of Assigned Authorization: E (excludes the right access)
Subtype: BMER
2. Authorization Level: *
INFOTYPE: 0002, 0005, .............., 0167, 0168, 0169, ......
Interpretation of Assigned Authorization: I
Subtype: *
Profile 2 is overwriting the profile 1. What i did was in profile 2
I removed the 0167 under INFOTYPE. made the profile 1 as follows.
Final 
1. Authorization Level:R (read access)
INFOTYPE: 167 (Health plans)
Interpretation of Assigned Authorization: I (incldue )
Subtype: BMER

I did the trick. The user is able to view the benefit plan not edit. the system throws a message "you are not authorized to do this" if he tries to edit. However it is one way of restricting the user. might be not elegant. but quick.

ESS UI5 role import problem on Portal

Dear Gurus,
I have tried to import pfcg role for ess ui5(SAP_EMPLOYEE_ESS_UI5_1) into portal, it is not importing and not giving any errors as well.
other than ESS all are importing into Portal.
My Portal Version is NW7.4 and ECC 6.0 EHP7 HR Renewal FP 04.
could any one please suggest why this is happening. In Sandbox and development is working where as QA is getting problem.
Thanks in advance .
Regards,
cbr.

Hi,
Have you checked the gateway error log, transaction - /IWFND/ERROR_LOG as this should identify what is missing (under the menu option 'Error Log > Global Configuration you may want to change the error log level to 'Full' otherwise some detail is hidden).
Have you activated the TASKPROCESSING Odata service?
This thread may help UI5 Approval - Missing OData Service TASKPROCESSING
I am also having issues with the Approvals lane when I lauch the tasks that I have just raised a thread for.
Regards
Jon

Best Practice for ESS/ MSS role customization

Hi ,
I would want to know the best practice for role customization for ESS / MSS business package . For eg if my company does not want to use someof the workset like working time , travel etc , what is the best practice for this scenario .
anEEZ

Hi Aneez,
This is the link for complete best practices on NetWeaver
http://help.sap.com/bp_epv260/EP_EN/index.htm
Browse the Busines scenarios, you will find what you are looking for.
Now, these ones is specific for ESS and MSS
http://help.sap.com/bp_epv260/EP_EN/html/EP/N26_ESS.htm
http://help.sap.com/bp_epv260/EP_EN/html/EP/N27_MSS.htm
Hope this helps,
Kumar
P.S Reward Points for useful answers.

Error in skill profile under ESS career and job

Hi
When i am accesing skill profile iveiw under careen and job in ESS if i click add skill profile it is displaying the error " Unable to find a root object for the object type specified "
Thanks,
faizol

please paste the whole error,
check the skills in backend system on how it is maintained ie qualifications

ESS / MSS Roles

Dear Gurus,
Iam basically a HR Technical, now moved into functional role.
I need to know how to set one as ESS user or MSS user.
This will be of which part of implementation, will that be the intial stage of realisation?
Please help me with some examples how to create a ess user
I know the relationship will be made at Communication Infotype (105)
my mail id is: [email protected]
Thanks in Advance
Sera
Message was edited by:
Sera

Hi Sera,
To assign Personnel number in R/3 to your portal user:
1) Your portal user is mapped to your R/3 user.
2) Login in R/3 system using your user and password,
3) Goto PA30 and enter pernr you want to assign to your user,
4) Create a record for infotype 105 and subtype 0001 and enter your user name there.
5) save the changes.
This assigned pernr to your user will be ESS / MSS user when you log in to portal.
Hope this helps !!
Regards,
Ruchi

ESS- User Roles

Hi Experts
I am using ECC 6.0 and ESS 7, for SAP Gui (R/3) also we are using Portal, means as per the user roles assigned in R/3, user is able to view different services of R/3 in portal with ESS.
For ESS I am using all the three standard roles of ESS i.e.
SAP_ESSUSER
SAP_ESSUSER_ERP05
SAP_ESSUSER_ERP
but when I had assigned all these roles to a user and accessing the ESS I am facing the following error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
Plz help me in this regard
Thanks in advance
Sheetal Gupta

Hi Sheetal,
try to give....only one role..i.e SAP_EMPLOYEE_ERP or SAP_ALL and check it..
it could also may be poss thatt user is locked in backend....
u also need to assign ESSUSER group to user..
regards
Jigar Oza

Under ess wdAbap role

Similar Messages

Maybe you are looking for