Under "History," a specific website with 6 line entries would not respond to the delete button. Is this a dangerous website?
I delete websites I visit in "History" line by line, and I save the ones I find valuable for viewing in the future. Last week I visited a new website and checked out a few articles. A few days later I was deleting that day's line items I did not want to revisit. This particular website would not let me delete any of it's line items, no matter what. It was Just this website. Never have I encountered this problem. I had to go into Firefox and delete this particular website under "Forget this Site." Any answer as to why?
''guigs2 [[#answer-680061|said]]''
<blockquote>
That is how I delete individual websites from history, what steps were you taking to delete the site entry?
</blockquote>
I usually just highlight websites under a specific day of "history" and hit the delete button on my keyboard. Gone.
When that didn't work for the one website, I tried right clicking that line, and a variety of other things. The specific website just would not go away. I just did not want to delete 7 days of history at one swipe of the delete key. Finally I went out to Firefox's 'Getting Started,' and in the left column was 'Privacy & Security Settings.' There is a section under Privacy & Security Settings called Delete Browsing Search and Download History. I read those items to see if there was something I was missing. One was called "How do I remove a single website from my history?" Followed instructions and just that website popped up. Highlighted those items from that site and deleted. Gone. Still do not know why the website would not delete in the first place. Makes a paranoid more paranoid about websites watching you.
Similar Messages
-
After resetting the SMC the keyboard is inoperative. On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol). I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen.
When I try to login with my username, no characters appear as I type.
I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
Thanks for your helpWhat happens if you close the lid? Sleep?
In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover -
When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?
You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites. You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway. Find this file and you can alter your website.
Use a spotlight search to try and find it and if this does not work you can download something called Find Any File. If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published. -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.
You are absolutely right. Thought Enter meant Enter. I was wrong. Thank you for the help.
Rod Rogers, Broker
Accredited Land Consultant (ALC)
Metcalf Land Company, Inc.
Office: 864-585-0444
Mobile: 864-316-0297
Fax: 864-583-6000
<http://www.metcalfland.com> www.metcalfland.com -
After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?
-
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I cannot sync my iPod. I keep getting the following messagei: AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Help!
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?
You can do it with Leopard but it depends upon the iTunes version which you did not reveal. Also make sure you are looking in the right place for purchases.
Consider buying a backup drive so you do not need to do this again. If you are going to run old hardware and software you need to live differently because yes, at some time you will find your version of iTunes no longer works. You're lucky it still works with Leopard. As you can see, some versions still work with the iTunes Store but not for repeat downloading.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756#24176756
Select the iTunes Store on the left side of iTunes if you have the sidebar displayed, or with the button at the top right.
Click on Purchased on the right side under Quick Links (see https://discussions.apple.com/message/26364186#26364186)
You can re-download your available previous purchases. -
Few line items are not coming at the time of creation of delivery
Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan SHi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
'ServerProperty' with 'Name' = 'Language' does not exist in the collection
LS,
One of my customers (using ssas 2012) is facing collation issues which result in missing facts in the cubes. I suggested them to have a look at the Analysis Server Properties. Howevere, on selection of the Analysis Services Properties page 'Language-Collation',
it doesn't open the page showing the properties, but instead the following message pops up:
'ServerProperty' with 'Name' = 'Language' does not exist in the collection
Any ideas on what could have caused this and how it can be fixed ?
We're considereing a restart of the SSAS server, but need to be very carefull because it's their production environment.
Appreciate your help,
Kind regards,
Cees
Please remember to mark replies as answers or at least vote helpfull if they help and unmark them if they provide no help.I am also experiencing this error when clicking on the Language/Collation page of the Analysis Services Properties dialog.
I suspect this is causing some other strange behavior such as an "invalid characters in hierarchy names" error when deploying an SSAS database, when the same solution/project can be deployed successfully from other machines. In that case, there are parenthesis
in the attribute name but no user-defined hierarchies. Error:
Errors in the metadata manager. The name, 'Project ID (Description)', for the cube hierarchy is not valid because this name is a reserved word, contains one or more invalid characters (.,;'`:/\*|?"&%$!+=()[]{}<>), or is longer than 100 characters.
I would like to avoid having to re-install SSAS if at all possible. Any help is much appreciated.
LB
Maybe you are looking for
-
If activated on PC can i then plug it into my Mac and sync?
Basically if i activate it on my PC connected to the internet can i then plug it into my MAC with no internet and sync my contacts and things? Thank you
-
Applying color groups to grouped art gets randomized
Hey Guys, I've been fighting with this issue for a bit over here. I have a collection of color groups, that I am applying to grouped objects, but every time I change out the color group, it randomizes the order which the colors are applied. In the k
-
Split event before selected clip grayed out
When editing movies, the option "split event before selected clip" is always grayed out...can anyone help???
-
I use a Nikon D100 and shot a number of raw NEF files. Some of them were imported cleanly, others display as a fractured photo in Organizer, but are OK when I view them full screen. What am I missing?
-
Two Schedule Lines after MATP check
All, We are doing MATP check in Sales Order. After the MATP check, the Sales Order is confirming with two Schedule Lines, the first line is confirming with 0 qty and the second line which is created after two days and is confirming with actual Sales