Under manage devives, how can I tell which device is which?

Under manage devices, I have 10 devices and I want to remove some but how can I tell which device is which? I have 6 Iphones on there but they all have the same name so how can I tell which Iphone is associated with a certain number so I don't remove the wrong phone? Please help!

Remove all of them. Then hook one at a time to the computer. Give each a different name.

Similar Messages

  • How can I tell the device is connected to itunes 12?

    how can I tell the device is connected to itunes 12?  I have Windows 8.  I hear that the device is connected, but don't see the device to manage.  Only thing that happens is on the phone it says Trust the computer..   I say Trust and nothing happens.

    in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
    if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
    Worst case scenario you nee to resatrt

  • How can i tell what devices are accessing my iMessages?

    I suspect someone has set up an iPad to download my iMessages without my authorization. How can I tell what devices are linked to my phone's iMessaging?

    Thank you both. I am changing my password...I was just hoping there was some way I could tell if this other person had been reading my iMessages up to this point. It seems like there is not. How about this scenerio: I turn off the iMessaging on my phone. I have someone who has iMessaging send me an iMessage. We see if their device registers their message as "delivered" even if it doesn't come through to my phone. Would that indicate then that it had been delivered to another device?

  • How can you tell what users have which reports open in Infoview

    Hi!
    In Crystal Server XI, is there any way that you can see what reports are currently being viewed in Infoview and by what user?  Or a history of how many times a report has been viewed so that I can tell which reports are not used that often and maybe adjust the schedule or get rid of them. 
    Thanks,
    Cyndi

    Cyndi,
    The method to track the information you are seeking is called Auditor.  Auditor is either installed at server software initialization or the install can be performed after you're deployed by re-installing the software and choosing only the Auditor piece.  It is best to study the guide (xir2_bip_auditor_en.pdf) prior to launching out on this endeavor.
    Thanks,
    John

  • How can I tell what devices are connected to my e2000

    I have a cisco e2000.  I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router.  Is there a way I can tell what those devices are?
    Also, even thoug the setup said my guest access had a password, I found out it did not.  Any concerns about nosy neighbors?

    Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

  • [p7-1240] How can I tell which graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
    My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
    This question was solved.
    View Solution.

    Thexn, welcome to the forum.
    The problem is, many of the newer video cards require the computer to have a full UEFI BIOS.  HP began using one in mid-October, 2012.  Before this date the BIOS is Legacy.  This is why the video card didn't work with your computer.
    I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS.  It has a switch to change to Legacy or UEFI.  There is a video link directly below the picture of a card.  Paul from Newegg gives a full description of the card.
    I like EVGA cards the best.  Their Tech Support has given me a lot of information about their cards.  However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS.  They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How can I tell what MSI board?

    Hi,
    This may sound stupid but...
    I have a MSI motherboard in my machine but do not know what it is. I bought the machine from PC world (DON'T LAUGH) and it is still under guarentee. How can i tell what the motherboard is without openin the case?
    The spec is a
    P4 2.53 Ghz (533 FSB)
    MSI (MS-6507E-L) Mainboard
    512 mb DDR PC2100
    80 GB Seagate 5400rpm
    Geforce 4 420 mx 64mb
    17" Proview monitor
    Windows XP Home SP1
     ;(  Soz i Posted it in socket A forum  ;(
        !!!ME = STUPID!!! (THATS WOT U THINK)  

    Quote
    Originally posted by Leighroy2003uk
    HI all
    jeffPH thankz for the replies but its impossible that I have a 6533 mobo as I have a Pentium 4 2.53 GHZ on a 533 FSB. (That board dont support it) Anymore suggestions???
    Cheers
    Leighroy
    according to the product specs here
    specs
    it does support a 2.53 533 chip.  try downloading the bios and using the utility to detect the chipset, but im pretty sure you have a 6533

  • How can I tell all PCs has the DAU installed?

    I am running ZCM 10.3 on SLES 10. I have enabled patch management and I saw the DAU has version 38. How can I tell version 38 is the latest DAU for ZCM 10.3.
    Also, how can I tell all devices have the latest DAU installed? I came across a few devices have problem with ZCM agent and after I fixed the issue, I saw it started to install the DAU. However, if I have not touched that managed devices, I would not know there is a problem. Can I check all devices status with DAU on ZCC?
    Regards
    Andy

    andyj2009,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT201653 We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    Since the only thing needed in that box is the small piece of paper with the (very long) registration code on it (usually found inside the booklet), see if that is actually there and, if it is, call Apple at 800-275-2273 and ask to be transferred to the Applecare department. Here is the link to the Applecare plan - just in case you may need it, see the fax numbers listed under para. 9 (Cancellation).
    http://www.apple.com/legal/sales-support/applecare/appmacnaen.html

  • HT1420 how can you tell which computer is authorized inorder to reauthorize?

    HI I just purchased a new mac. I previously had a pc.  I just went to itunes to play a song.  When I went to log in, it told me that I had 5 authorized users on the account already.  How can I tell who the 5 are or choose which one to deauthorize?

    No, you cannot.
    About De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    Also, see iTunes Store- About authorization and deauthorization.

  • How can I tell which apps were purchased on my account?

    I did search for answers but couldn't find one that fit.
    I have an iPhone and so does our son. 
    Early on my son purchased apps on my account and downloaded them on HIS iphone.  Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone. 
    When we open iTunes and connect his phone, there is a list of apps that are on his phone.
    QUESTION
    How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct? 
    I don't want to DO anything with the apps, I just want to know one from another. 
    Thanks in advance!!

    List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

  • HT4914 How can you tell which songs are downloaded from the cloud on an ipad

    How can you tell which songs are downloaded on the iPad from the cloud?

    I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

  • How can you tell which cabinet you are connected t...

    As the title says, how can you tell once installed.
    the reason i ask is where i live there is only the bt-pcp and the drl-fttc cabinet and no others.
    from what i heard is that both BT and DRL occupy the same fttc cabinet, and this would suggest so based on other information received.
    yet from other information i'm hearing is that they don't and we're probably wired all the way back to the exchange which i would have thought was a bit odd seeing with 3 miles from exchange (as the crow flies).
    so is it possible that they use the same cabs?

    hi,
    yeh am on infinity now and so far working fine
    had one disconnection but thing that was caused by outage as took router a few attempts to re-connect, but other than that my pppoe has only dropped when made a change on router which required it to restart.
    now been connected for 8 days without dropping (usually dropped every weekend when on DR) so continuing to monitor.
    the engineer advised was connected via the cabinet in street, but only cabinets are the bt-pcp and the dr-fttc cabinets, and AFAIK BT and DR share the cabinet from what I've been previously told, but then someone else has said they won't do that and the connection is probably one that is underground if there is no bt-pcp.
    i'll send Dean a message just so i know for future as i know the bt-pcp cabinet my number is connected too.

  • How can I get my itunes library which is stored under my email address onto my husbands Ipad which is under his email address?

    How can I get my itunes library which is stored on my laptop/Ipone under my email address onto my husbands Ipad which is under a different(his own) email address?

    Your iTunes Library is yours and yours alone.
    However... if you wish to share iTunes Content with your husband... see here...
    SHARING iTunes MUSIC
    http://macmost.com/five-ways-to-share-music-in-itunes.html
    Sharing Apps
    http://macmost.com/sharing-ios-apps-with-family.html
    It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

  • How can I tell which machines need a given patch?

    So when I run WSUS and view the Updates Report I can type in the specific patch I'm working on (MS14-066) and it tells XX computers have it, YY computers need it, etc.
    How can I tell which are the YY computers that need the patch so I can go fix them up?  Is there an easy way to do that?
    Thanks.

    How can I tell which are the YY computers that need the patch so I can go fix them up?
    Run the Detailed View version of the report. There will be one (or more) pages for each update. The detailed pages list each computer, the approval status, and installation state.
    However, the conventional way to address this question is to create target groups based on some classification of how you would approve updates (e.g. Desktops, Win2008R2, .NET4) and approve the updates for the *groups* of computers that should install the
    updates.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for