Under which directory the HttpclusterServlet bging configured in an weblogic11g environment

Hello,
I am new to weblogic server and currently in the process of configuring a managed server (standalone) with HttpclusterServlet as a load balancer.As part of this I am unable to find under which directory the HttpclusterServlet being configured and the associated application to be deployed in the managed server.
Could any one help me on where to find the same,
Regarsd,
Saravanan

Hi bornesel /Aniket,
Thanks for the information.
It seems that a default HttpclusterServlet comes as part of weblogic server.I just want to make use of that as part of the deployment.Do you have any idea on the same?
Regards,
Saravanan

Similar Messages

Under which TAB the D-distrb. spec status MVKE-VMSTA can I fond in MM02?

Hi Experts,
Am thinking to write BDC for to change the value of MVKE-VMSTA from 33 to 34, so, let me know that, under which TAB of MM02 I can find it?, bcoz, I did not see any where in MM02?
or any other transaction I hv to look to chage this value?
thanq

thanq
i thought the same, but, its MARA-MSTAV.
And in my system, for my_matnr in X-distr. chain status, its BLANK.
when i see the MARA-MSTAV its BLANK fine.
but, when I see the MVKE-VMSTA its 33.
so, am thinking its not X-distr chain status.
thanq

Who can tell me which directory the JSSE source code in?

I get the source code of JDK5,but there are too many directories ,I don't get the source code of JSSE,I am beginner.

Then you have no need for the source code of either J2SE or JSSE actually.

DirectAccess multisite on Server 2012 R2: 'The remote access configuration task (raconfigtask) in Windows Task Scheduler cannot be disabled"

Dear all,
I'm an experiencing an issue when configuring 2012 R2 DirectAccess multisite.
The initial configuration of the first site in a multisite setup works fine, however when i try to add ANY other server on another site, i see the below screenshot, the full text of which is: "The remote access configuration task (raconfigtask) in Windows
Task Scheduler cannot be disabled" while the entry point is added.
THere are no logged events on the remote server, but on the controlling server i see this in the event log:
Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>
And this in the taskscheduler:
Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>
Any ideas what might be causing this? All servers are in the same domain, firewalls don't seem to be dropping anything, SCCM client is installed, but thats it.
Appreciate any feedback.
Jim

Dear all,
I'm an experiencing an issue when configuring 2012 R2 DirectAccess multisite.
The initial configuration of the first site in a multisite setup works fine, however when i try to add ANY other server on another site, i see the below screenshot, the full text of which is: "The remote access configuration task (raconfigtask) in Windows
Task Scheduler cannot be disabled" while the entry point is added.
THere are no logged events on the remote server, but on the controlling server i see this in the event log:
Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>
And this in the taskscheduler:
Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/15/2014 12:55:58 AM
Event ID: 140
Task Category: Task registration updated
Level: Information
Keywords:
User: SYSTEM
Computer: WWCLORAS01.apco.net
Description:
User "S-1-5-18" updated Task Scheduler task "\Microsoft\Windows\RemoteAccess\RaConfigTask"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>140</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>140</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-15T07:55:58.432317300Z" />
<EventRecordID>1738</EventRecordID>
<Correlation ActivityID="{D4236B4E-E841-0003-E5BA-23D441E8CF01}" />
<Execution ProcessID="840" ThreadID="3852" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>WWCLORAS01.apco.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="TaskUpdated">
<Data Name="TaskName">\Microsoft\Windows\RemoteAccess\RaConfigTask</Data>
<Data Name="UserName">S-1-5-18</Data>
</EventData>
</Event>
Any ideas what might be causing this? All servers are in the same domain, firewalls don't seem to be dropping anything, SCCM client is installed, but thats it.
Appreciate any feedback.
Jim

Which are the initialization parameters that can be replaced by Environmet ariables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
SET NLS_LANGUAGE=US.AMERICAN.ISO***
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

Which are the initialization parameters that can be modified by Environmet variables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

Which is the installed directory?

In my app, I need to find out where it
is installed. (Note: User.dir is not the solution
which will be clearer as I explain).
Suppose it is installed in c:\myapp\myjar.jar
And the classpath may be:
classpath=...;...;...;...;c:\myapp\myjar.jar;...;...;
In any directory, for example, c:\yourapp\
the user can run as:
java myapp
Then, how do I know that myapp is installed in
c:\myapp
I don't want to scan the classpath for the answer
because it seems too much work.
Thanks,
Ben

Most of the time you don't need to know. Why?
(a) You can put resource files in the JARs (which are then available using the classloader), and configuration files in the user's home directory (which is accessible using user.home), and
(b) Most people tend to launch their applications from some sort of startup script, which could pass this through as a custom system property using -D.

Help needed to log into an Open Directory account which has the same username as the local account

Hello,
I have successfully setup a Mac OS X Lion Server and it is an Open Directory Master. On the server Ihave created an account with the name 'Connor'. I have numerous Macs (allrunning OS X 10.7 Lion) connected to this server but on one of the Macs thereis a local account with the name 'Connor' too (the local and networked accountshave different passwords). I want to log into the Open Directory account onthat mac. So, I have done an authenticated bind to the server, but when I go tolog in the password box shakes. I think the computer thinks I am trying to loginto the local account and not the Open Directory account. On Windows, I canlog into either the local accounts or the networked accounts by typing\LOCAL-COMPUTER-NAME\Connor. So, I was wondering if there was a similar commandto do this on Mac.
I don't think I haveworded this very well, so if someone doesn't understand please ask me somequestion about the problem and I will try and explain it better.
Any help would be greatlyappreciated,
Connor

Maybe I didn't make myself clear. I have used directory utility to do an authenticated bind to my server. I also have no problem logging into other accounts in the Open Directory. But, I just can't log into the account which has the same name both in the Open Directory and locally.
Was there something I missed in Directory Utility? Could you please help me if this is so.
Thanks for replying so quickly

Is there an add-on program, which assumes the directory structure of a Windows PC with subfolders?

Hi all,
Is there an add-on program, which assumes the directory structure of a Windows PC with subfolders?
So that the playlists are created with all the directories and subdirectories.
I would like the Music folder
and all its subdirectories
drag into iTunes.
Then should the songs in iTunes and in the Iphone geanu be designed with the same directory wiht subdirectories structure.
Example:
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\AlbumArtSmall.jpg
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\Betriebsdirektor - Das Leben Ist Grausam - die Prinzen - 05 - .mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\Blaues Blut - Das Leben Ist Grausam - die Prinzen - 07 - .mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Die Prinzen\Album Die Prinzen - Das Leben ist grausam\desktop.ini
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Herbert_Grönemeyer_-_12_[2007]_-brandneu-_[found-on-www-bitreactor-to].to rrent
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 01 - Ein Stück vom Himmel.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 02 - Kopf hoch,tanzen.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Grönemeyer\Zwölf\Lied 03 - Du bist die.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Hannes Wader\ Dass nichts bleibt wie es war\Rohr im Wind - Dass nichts bleibt wie es war - Hannes Wader - 07.mp3
G:\1 wav+mp3\1 Alles\2 Deutsches\Hannes Wader\ Dass nichts bleibt wie es war\Schon so lang - Dass nichts bleibt wie es war - Hannes Wader - 02.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\(Everything I Do) I Do It For You - Bryan Adams - Best of Me (Ecopac) - 10.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\(Sittin' on) the dock of the bay - Otis Redding - (Sittin' on) the Dock of the Bay - 01.mp3
G:\1 wav+mp3\1 Alles\3 Song\Allerlei\~ Change Is Gonna Come - The Neville Brothers - Yellow Moon - 01.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Baby, Do You Wanna Bump - Daddy Cool - Boney M. - 06.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Barbarella Fortuneteller - Daddy Cool - Boney M. - 15.mp3
G:\1 wav+mp3\1 Alles\3 Song\Boney M. - Daddy Cool\Belfast - Daddy Cool - Boney M. - 04.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\AlbumArtSmall.jpg
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Always On My Mind - Definitive Country Album - Elvis Presley - 03.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Burning Love - Definitive Country Album - Elvis Presley - 09.mp3
G:\1 wav+mp3\1 Alles\3 Song\Elvis Presley - Definitive Country Album\Don't Cry Daddy - Definitive Country Album - Elvis Presley - 15.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Every Little Thing She Does-Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Folder.jpg
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\goodnight sweethart - flying pickets - flying pickets .mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\Groovin'-Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\3 Song\Flying Pickets\I Got You Babe - Flying Pickets - Flying Pickets.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classical - Franz Liszt - Liebestraum piano - Franz Liszt - Liebestraum piano.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classical Guitar - Greensleeves - Greensleeves.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Classique - Schumann - Carnaval, Chopin - Schumann - Carnaval, Chopin.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Crown Chakra - Tony O'Connor - Tony O'Connor.mp3
G:\1 wav+mp3\1 Alles\4 Instrumental\Allerlei\Dallas - TV 70's & 80's.mp3
usw.
Is there a program led?
Thank you very much
frank

deggie wrote:
No, as there is no such file management system in iOS.
I do not understand this..
In iTunes I can create folders and subfolders.
Please look.
I would like to drag the folder "1 All" in iTunes.
There should also then the folder structure are taken
iTunes Windows 7 Explorer
Folder in Folder Folder in Folder
Thank you very much
Frank

How to get the role under which a query is published

Hi All.
I want to know how will I know under which role a particular query is published. I have the query name. Please provide some suggestions at the earliest.
Thanks in advance,
Sananda

Hi Sananda,
When you go to RSRREPDIR table selection screen in SE16, you will see 2 'Query' fields. Put your query technical names in second 'Query' field and execute. From the output, collect the values in first 'Query' field (GENUNIID). Take these IDs and put them in AGR_HIER table to see menu roles against these IDs. You can download data from both these tables into excel sheets and put vlookup to find menu roles against query technical names.
Hope it helps.
Thanks,
Abhishek.

There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Changing identity under which the WCF service

Yes second one. I'm asking about changing identity under which the WCF service runs on sever side.
When add reference to the WCF service, VisualStudio automatically add following lines into the config file:
<identity>
<userPrincipalName value="xxx/xxx" />
</identity>
If this doesn't match with the identity used sever side, the app will throw exception when running. I tried debug in VisualStudio. It reports:
An exception of type 'System.ServiceModel.Security.SecurityNegotiationException' occurred in System.ServiceModel.dll but was not handled in user codeAdditional information: SOAP security negotiation with 'http://<host>:<port>/xxx.svc' for target 'http://<host>:<port>/xxx.svc' failed. See inner exception for more details.
The inner exception is:
Security Support Provider Interface (SSPI) authentication failed. The server may not be running in an account with identity 'host/<machinename>'. If the server is running in a service account (Network Service for example), specify the account's ServicePrincipalName as the identity in the EndpointAddress for the server. If the server is running in a user account, specify the account's UserPrincipalName as the identity in the EndpointAddress for the server.
Any idea?

Yes second one. I'm asking about changing identity under which the WCF service runs on sever side.
When add reference to the WCF service, VisualStudio automatically add following lines into the config file:
<identity>
<userPrincipalName value="xxx/xxx" />
</identity>
If this doesn't match with the identity used sever side, the app will throw exception when running. I tried debug in VisualStudio. It reports:
An exception of type 'System.ServiceModel.Security.SecurityNegotiationException' occurred in System.ServiceModel.dll but was not handled in user codeAdditional information: SOAP security negotiation with 'http://<host>:<port>/xxx.svc' for target 'http://<host>:<port>/xxx.svc' failed. See inner exception for more details.
The inner exception is:
Security Support Provider Interface (SSPI) authentication failed. The server may not be running in an account with identity 'host/<machinename>'. If the server is running in a service account (Network Service for example), specify the account's ServicePrincipalName as the identity in the EndpointAddress for the server. If the server is running in a user account, specify the account's UserPrincipalName as the identity in the EndpointAddress for the server.
Any idea?
Please open a new thread for your second question.
I sale myself ONLY half CNY！

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so. For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so.
For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the timeout/reminder notification. Any idea ?
-Thanks,
Arun

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Please let me the sites which has info on SD configuration

I need some web address which has step by step configuration for SD like rebate, variant pricing, service order

Hi Prem,
Kindly go through the following link:
http://help.sap.com/bestpractices/BBLibrary/bblibrary_start.htm
It has a list of configuration guides for various industries & country-wise related to all modules.
Hope you can get the configuration guide related to SD or your requirement.
Hope the information is useful for you.
kind regards,
Thangesh

Which is the optimal hard drive configuration for Logic Pro ?

hello people
i would like to ask your advices about possible hard drive configurations for Logic Pro
I have a Mac Pro and thinking to buy 4 x 500GB drives .
there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
model 1 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
which means to using 4 hard drives as 2 drives
model 2 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 Single drive for Sound banks (500)
1 Single drive for Recording (500)
which means to using 4 hard drives as 3 drives
Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
I am kinda rookie for these subjects :/
thanks in advance

heelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again.

Under which directory the HttpclusterServlet bging configured in an weblogic11g environment

Similar Messages

Maybe you are looking for