Underdelivery tolerance level automatic closing of PO

Hi Gurus,
We define 5% tolerance level for under and overdelivery, for example: for stock items, we have PO qty 100 pcs,
during goods receipt, over delivery tolerance of 5% we can GR 105 pcs and marked as delivery completed, and in under delivery we can GR 95 pcs but it's marked item partially delivered how we can set this item to be delivery completed to automatically closed the PO?
thanks
Edited by: Marina_25 on Jan 21, 2011 6:57 AM

Hi Marina,
                Your requirement is a genuine one, but in between 2 optins system is not able to decide which one to take
1.) As per tolerance prospective it is under delivery
2.) But you may receive that 5% also in later date
                                                         You can go for mass updation of delivery completed tab thro MEMASSPO and can be closed
Thanks.....
Srini Rao

Similar Messages

  • Tolerance levels in Purchasing MM

    Dear All,
    Can someone please give help me I am new with MM. The business what to set-up some tolerance levels in the purchasing side. I was able to find all the different tolerance levels available in Purchasing I chose BD, tolerance level at the invoice level total. In doing this the systems requires for an account so the difference line item gets posted. I end up using an existing account that we use for PPV. I set-up the tolerance level, I assigned t he account to Purchasing, but when I try to post an invoice I can see the the difference in the G/L account, but when I save it tells me that Account needs assignment to CO. Do I need to do anything?
    1- This is an existing account that we use which already cost centers and profit centers are  posted.
    2- Because a purchase order can have different profit centers at line item level, and this tolerance level is at header level, of course the system will ask me for a cost center, I bypass this by entering a default cost center at the account level, but this will not work if all posting will default to a default cost center. How can I set this right?
    3- Is there a way that I can have the system look at the first line item pick the profit center available and enter the difference to that profit center?
    Your help will be greatly appreciated.

    Hi
    For point 1, check OKB9 again to see any problem there. For eg have you ticked "Priority Business Area" or you have a ctivated Auto assignment at Co Code level or Co code+Business/Valuation area level, etc.
    For point 3, please check whether in OKB9 for that Cost element (small differences), whether you have setup automatic account assignment at Profit center level.
    Jayaram

  • Unlimited tolerance is automatically ticked in service purchase order and is in diplay mode

    Hi,
      In service purchase order in the delivery tab, I am unable to view underdelivery tolerance and unlimited tab is ticked automatically and it is in display mode . How to remove the unlimited tick mark for the service purchase order for a particular doc type. Please find the attached screenshot.
    Regards
    Badri

    Its proposed by system,
    If you do not tick the option, then you can make only one service entry sheet.
    Please read the discussion No Limit and unlimited indicator in PO
    And Unlimited Overdelivery with Item Category D
    Here you can find the why this option should be ticked.
    Regards
    Dev

  • FEBAN automatically closed the Open item for Debtor

    Open items in our company usually closed manually. But this time FEBAN closed an open item (Debtor). Where can i change the configuration for not automatically closing the open item by EBS. Any help? Points will be awarded.

    HI,
    Change the posting type in the EBS configuration for that particular posting rule.
    rgds

  • MIRO - Require Lower Tolerance Level to enforce Payment Block

    Hi,
    I have a requirement to enforce a payment block in MIRO when the tolerence level is below the threshhold set-up in config.
    My original intention was to use Userexit MM08R002 to check the tolerance level, however EXIT_SAPLKONT_002 does not seem to be triggering. It is active and I have placed a hard coded break point.
    Does anyone know how to trigger this exit in MIRO?
    Many Thanks,
    Phil

    I managed to formalize a solution by implementing Enhancement Spots in FM: MRM_AMOUNT_CHECK & MRM_FINAL_CHECK.
    I exported the message table in MRM_AMOUNT_CHECK to memory. I then imported and processed this table in MRM_FINAL_CHECK, triggered when the document is posted. If the message table contained relevant messages i.e.084 then I enforced a manual payment block.
    Hope this helps others with a similar problem.
    Regards,
    Phil

  • Vendor Evaluation - Underdelivery Tolerance for Qty. reliability Criteria

    Hi experts.
    When using Underdelivery tolerance in a PO, the Evalation criteria Qty. reliability is not taking into account this tolerance and give a vendor a score based on the requested qty.
    It doesn't make any sense to me, since I'm allowing the vendor to deliver up to this tolerance.
    Please advice.
    Thanks.

    Hi,
    When calculating score for quantity reliability, the Minimum delivery quantity % mentioned in customizing (Txn OMGL) is only taken into account, so that if the delivered quantity is below this then the score for the vendor will not be calculated.
    The underdelivery tolerance is not checked. This is the standard functionality.
    Best Regards,
    Arminda Jack

  • Automatic closing of excel export of uwlCollaboration tasklist.

    Hi,
    I use the iView uwlCollaboration in one of my Room Template, and I face a problem when I use the "Export to excel" button.
    When I click on this button, I face 3 possibilities :
    - Open the xls file.
    - Save the xls file.
    - Cancel the action.
    When I click on open the file, a new window, containing the xls file, is opened. And right after that, this new window is automatically closed. And I'mnot able to consult the file.
    So I'm forced to save the xls file before consulting it.
    I work on EP 7.0 SP10.
    Any idea of what's happening ?
    Thanks,
    Loïc LEVEUGLE

    However, that is not a goal of mine. After making changes to a file or adding keywords, I want Lightroom to automatically update the actual files (in my case jpegs) so that I do not need to export them to be used elsewhere such as in a slideshows etc.
    Lightroom cannot do this automatically.
    Furthermore, despite the fact that your goal is to update the JPGs immediately, this is not a good idea in any case. You don't really want to overwrite your originals with edited versions of them. This is a really poor practice.
    I do not want to have to export these files.
    Then you absolutely can't get there using Lightroom. I'd be surprised if there really was any software that will do this automatically for you, perhaps you could define an action in CS6 to do this (don't know, I never tried).

  • Set automatically closed indicator in PR while contract/agreement created

    Hi experts,
    Is there any possibilities that we can set automatically closed indicator in PR while contract/agreement created?
    Normally, PR closed indicator is set when PO created refer to the PR.
    Is there any IMG configuration to utilize this matter?
    Thanks
    MD

    Hi,
    You can try this using the Userexit in PR.So once the RFQ or Agreement is created for the PR then the ststus will be changed.
    Check this user exit.MEREQ001            Customers' Own Data in Purchase Requisition
    Regards,
    Raj

  • SSIS How to set Tolerance levels via parameters

    Hi all
    I am after some help as pretty new to SSIS. I need to write some validation requirements on data which needs to be in SSIS.
    What I want to achieve is setting Tolerance levels on two fields.
    Field A has a tolerance lvl of 0%
    Field B has a tolerance lvl of 200%
    Both the fields will need to update a status field if the tolerance rule is broken
    These will need to be parametized as well.
    Thanks in advance

    Sorry not enough information
    From what you provided, it sounds like a simple update statement to me which can be called from an execute sql task.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Reducing sales order requeriments when doing production confirmation within underdelivery tolerance

    Dear PP Experts,
    I am facing a problem and would like to share with you.
    We have a FERT material being planning with strategy 20 (m.t.o.).  In this material (work schedulling) view, we define 10% (underdelivery tolerance).
    Suppose the scenario bellow ( in Stock Requeriments List - MD04 transaction):
    Inicial Stock: 0,00
    Sales order:  -1000
    Process order: 1000
    After doing a production confirmation of 990 pieces we have:
    Inicial stock: 990
    Sales order: 10
    But... after to run MRP a new planned order is created:
    Inicial stock: 990
    Sales order: 10
    Planned order: 10
    My requeriment is: 
    If I did a production confirmation of 990, I am already in the tolerance of 10% that means for us this sales orders needs to be considered completely done. In others words, the sales orders requeriments must be 100% reduced for not triguer a new planned order.
    Is ther a customizing or user-exit to solve it, avoiding manual actions?
    Regards,
    Marcelo Garcia

    Hi Marcelo
    MRP will not consider the production order tolerance during the net requirements calculation. If the sales order requirement is bigger than the stock, a new planned order will be generated.
    A solution to this issue is to use BAdI MD_CHANGE_MRP_DATA to make your own logic and make the sales order not relevant to MRP.
    See the following blog post for an example of this BAdI:
    Making an element not relevant to MRP or MD04 using BAdI MD_CHANGE_MRP_DATA
    BR
    Caetano

  • How do I stop iphone 4s camera from automatically closeing when open?

    How to I stop the camera ap from automatically closing when it is opened?  I click on it and it opens and then closes and goes back to home page.

    Try this:
    Quit all apps: Double tap the Home button and swipe the app preview page up
    then
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Report Server Automatically Closed

    how to slove this error
    Weblogic
    Report Server Automatically Closed....

    Hi,
    It seems that server got crashed or JVM got hook.
    Try to check the report server logs.
    Also check for any JVM specific dump file.
    Regards,
    kal

  • Purchasing A/P goods return automatically closed

    Dear all,
    In Purchasing A/P --> Goods Return automatically closed. Once I enter the Goods Return entries It closed automatically.
    Thanks and Regards,
    Chandru

    Hi Thiya,
    This is true for a Continuous Stock Database. 
    Ok, when a Goods Return is based on a Goods Receipt PO the Goods Return will be closed.
    The reason for this is that the cycle has been closed, there are no open ends. The Journal Entry and the goods movements that was created by the Goods Receipt PO have been reversed. By posting the Goods Return we are back in the exact same position as before posting the Goods Receipt PO. Therefore both documents are closed.
    Please note that since there was no Invoice there can be no Credit Note, therofore the goods return is closed.
    A question, if you are sending returnable goods to vendor, how can you then receive goods? I don't understand.
    I hope something that has been written here makes some sense.
    Jesper

  • My Browser automatically closed

    Hi, i have just installed Sun Solaris 8 on the sun sparc server but when i run the browers and write a site to open it my browers automatically closed and when i run the browers window again it again automatically closed again.
    can any body help me to resolve this issue

    Look here:
    *Tools > Options > General > Startup: "When Firefox Starts": "Show my home page"

  • Internet explorer automatically closed while using...

    While using gmail in internet explorer in desktop mode it automatically closed, can't use continually.
    Why it happens ?

    Hi, Tinoj007.
    Welcome to the Microsoft Mobile Community.
    Are you still having trouble with your phone's Internet Explorer? If yes, you may try performing some basic troubleshooting in your phone. You may reboot first your phone by pressing and holding the volume down & power keys for 10-15 seconds and observe if this will make any difference on your phone. If this will not work, you may try considering to use another browser that you may download from the Store. With this new browser, you may try to log in with your Gmail account and observe if it will not crash like the one that you are experiencing with the IE browser. However, if this will still persist with your phone you may perform a full reset on your phone to fully refresh the system of your phone. Note that this will cause deletion of all the files saved in your phone. Creating a backup before doing this is a must. Try doing this trouble shooting and let us know the outcome of it.

Maybe you are looking for