Underscores not supported in screen name?

We are trying to add users directly in Studio which their screen name needs to match their userid in another system, however when the screen name contains underscore Studio gives an invalid data error. This is odd as Studio supports LDAP which can have underscores in userids. Am I missing something?

Thanks!
We found a solution which overrides the default screen name validator. Seems to work well.
1) Shutdown Endeca Studio
2) Open the portal-ext.properties file under <%WLS_HOME>\user_projects\domains\endeca_studio_domain\eid\studio (highly recommended to backup existing portal-ext.properties file)
3) Add the following at the bottom of the file: users.screen.name.validator=com.liferay.portal.security.auth.LiberalScreenNameValidator
4) Save file
5) Start Endeca Studio

Similar Messages

  • Lumia black update does not support glace screen i...

    Recently, i have updated lumia black in my lumia 520. But as claimed in advt., I couldn't get the update of glace screen. Their is no link visible in settings.

    where was it claimed? The Lumia 625 and 520 does not support Glance screen even when updated to Black.

  • ITunes Not Accepting AOL Screen Name and/or Password

    As of late last night (early this morning), I am unable to sign in to the iTunes store on any of my devices (iMac, iPhone, iPad) with my AOL screen name, and receive the following message:
    "The AOL screen name you entered couldn't be found or your password is incorrect. Please try again."
    I am able to sign into AOL with the username and password so I know they are correct. I have eMailed Apple Customer Service and await their reply.
    Oy!

    Same Problem, and REALLY frustrating!
    I was in chat to Bangalore with AOL Support, since my paid account doesn't allow me telephone support. Their chat window disconnected me and went to 7 different technicians there. Each time they would read my history, it would disconnect. I was furious after an hour of this waiting, and gave up. They had no solution to this insane problem. And of course, APPLE does not allow you to contact them except for 48Hour turnaround on iTunes Emailing. In addition, the Apple Support site leads you to a screen where you are supposed to see "I cannot in via my AOL account" under the Billing Support, but that page, of course, is missing. And when you try to bring up that support pop-up window, it hangs and never brings up anything but the "Did this solve your problem" [yes] [no] buttons!
    I have tried fully removing and reinstalling my iTunes Account.
    I have changed my passwords on both my AOL and AppleID
    I have deleted caches
    I have deauthorized and reauthorized my iTunes account (only the AppleID works, my AOL id will not work)
    I cannot get to my AOL ID on either the iPhone or the iTunes on my Mac.
    The Apps I have running on my iPhone are critical for my use. iTunes started deleting them before I aborted the sync.
    This is unbelievably frustrating and an inappropriate way to support a customer, let alone an I/T professional such as myself. I even looked in to making an appointment with an Apple Genius, but that would be 3 day lead times in my area.
    Does anyone have any more suggestions? Is Apple Support listening?

  • Support forum screen names is wrong

    My screen name is wrong.  I specified my screen name to be "Jimmy-Jay" but Midler got tacked onto the end.  That came from a question asking me to enter the letters I saw in an image to stop non-human interaction with the support forum.
    I looked all over for "my account" or something like that to go into to fix.
    How can I fix this?
    Thanks.
    Jimmy-Jay

    Hi,
    This should be fixed now Let us know if you have any other questions.
    Thanks,
    SunshineF
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Many apps do not support touch screens

    A common issue is menus which are too long, so scroll bars appear, but scrolling the menu triggers the first menu item you touched... Joikuspot is the worst I have, despite the Nokia 700 being specified as compatible. Is this just another symptom of Symbian app development having de facto ceased 2-3 years ago?

    Thanks Mylenium,
    I appreciate the response. I was confused because precisely I own the full CS6 Production Premium and Encore is there, I was unaware that it was deprecated in CC. Oh well...also I remember Adobe Story in Creative Cloud last year did show up so I was confused as to why it was not showing up now.
    So Adobe Story is only cloud based now? hmmm...not sure how I feel about that one.
    Anyway, thanks for the reply and all my best.

  • How do I save my informaion to a bookmark (like my email) so I do not have to always reload my state and my screen name?

    Whenever I open up Firefox, it does not remember my information for my email on Cox. net. So each time I have to repeat which state I am in and it does not remember my screen name even though I have posted it to remember it. How do I get Firefox to let the website remember my information?

    Such details are usually stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    Make sure that you do not run Firefox in Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    Do not use Clear Recent History to clear the "Cookies" and the "Site Preferences"
    * https://support.mozilla.com/kb/Clear+Recent+History
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    * http://kb.mozillazine.org/Cookies

  • How does User get Identified by Screen Name and NOT by Real Name in submitting a Forum Post?

    I have noticed that when I post a question or discussion item to one of Adobe's Forum Communities, I am identified as the author of my post by my actual legal name, not by my Screen Name that I set up in my profile when I registered.  The same applies for the posts of others--they are identified by their legal names, not their screen names.  What is the purpose of the Screen Name we set up when we registered, if not to shield the identity of the individual from others reading the post, if that person does not want to have their true identity publicly disclosed in, or publicly associated with the post?  If I sign my post using my Screen Name, but then it is identified with my legal name when I post it, what good does it do to have a Screen Name?  Is there some way to have the software not use my legal name, but identify my posts by my Screen Name only, if I so choose that option?  (Of course, Administrators at Adobe can always (presumably) identify the (real name) author of the post, via the registration information associated with a Screen Name, should the need arise.)
    Sincerely,
    SpaceAdventurer

    Thanks for the reply, mytaxsite.co.uk.  And thanks for the screenshot showing me that my name is displayed to you as "spaceadventurer," which is what I had intended / wanted.
    I understand now, from reading through most of the original and replies to the post,Real name instead of Screen name displayed, where I noticed you replied several times, that the Screen Name / real legal name works this way on Adobe’s forums:
    When you are logged in - YOU (and only you) see your real legal name everywhere on the forums / web site, and associated with all of your posts
    When you are not logged in (to Adobe / forums with your Adobe username / password), you always see your name associated with your posts as your Screen Name only
    Everyone else always sees your screen name, everywhere, on all posts, regardless of whether they (everyone else) are logged in or logged out.  (Unless, of course, you set up your profile to have your Screen Name be your real legal name.  Then everyone will always see your real legal name associated with your posts.)
    When logged in, in the “Edit Communities Profile” web page (from the menu that appears when you click your Avatar in the black Adobe menu bar at the top of the screen), in the “Privacy” tab on that page, there is a “widget” called ‘Preview your profile’ in the upper right-hand corner of that tab.  This widget is supposed to show you how you or others, depending on which selection you make from the dropdown in the widget, will see your Profile (and therefore, your name) from their computers.  In fact, no matter which selection you make from the dropdown, the display of your profile that is produced ALWAYS shows your real legal name, which is misleading, because that is not in fact, what others will see. Others, whether “Registered Users,” “Friends,” or “Everyone,” will ALWAYS see your Screen Name only.  (Except for the exception I mentioned in the immediate previous bullet.)
    There is a way to change your Screen Name, should you feel the need to do so.  The steps to do that are detailed in response no. 75 to the "Real name instead of Screen name displayed" forum post.
    Does it sound to you like I have captured the gist of the main learnings that can be gleaned from that post ("Real name instead of Screen name displayed”)?
    Thanks,
    SpaceAdventurer

  • I have webcam and screen names not working on certain sites but OK on Explorer what can it be on Firefox.All worked up till Decembeber 2011 ...Thanks

    Question
    I have webcam not working and screen names not remembered on certain sites but OK on Internet Explorer.
    What can it be on Firefox?
    It's like cookies are turned off or something blocking.
    Even banking online is affected.
    All worked up until December 2011 ...Thanks
    Don
    [email protected]

    Okay- this is getting more fun-- I just system restored to a
    month ago because my computer froze up 5 times withing 15 minutes
    earlier today. Then I uninstalled and reinstalled Firefox because I
    noticed it was listed twice in my add and remove programs area. Now
    I go to youtube to see if by some miracle the beta page is
    working-- well not only did it not work, but now, even if I disable
    Norton, it STILL doesn't work, where as before that did make the
    videos show up. I'd really appreciate some help...

  • Tv as monitor, no picture (not supported)

    My hubby decided to get the picture size to fit screen. In the process he changed something that is not supported(black screen) for his monitor (tv). We get HP symbol and then a little box "not supported"with black screen. How to I change setting back so we can see the screen  again. It's a desktop HP Pavilion, using vga.
    Thank you for any help, Junia

    black screen, can see nothing , but f8 and f2 when turning on comp. Once it gets past HP logo, it goes balck with white words saying not supported. Not sure what he changed.

  • Getting "ORA-12534: TNS:operation not supported" connecting as sysdba

    Hi,
    We are getting "ORA-12534: TNS:operation not supported" error, while connecting as sysdba.
    bash-2.03$ sqlplus '/as sysdba'
    SQL*Plus: Release 10.2.0.4.0 - Production on Thu Feb 23 10:16:16 2012
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    ERROR:
    ORA-12534: TNS:operation not supported
    Enter user-name:
    I can able to connect to database using tns entry without any issue.
    SQLNET.ORA Contents:
    ====================
    bash-2.03$ cat /var/opt/oracle/sqlnet.ora
    ENCRYPTION_WALLET_LOCATION=(SOURCE=(METHOD=FILE)(METHOD_DATA=(DIRECTORY=/dboracle/orabase/product/10.2.0/dbs/wallet/)))
    SQLNET.WALLET_OVERRIDE = TRUE
    SSL_CLIENT_AUTHENTICATION = FALSE
    SSL_VERSION = 0
    I am not aware of wallet. Please help me out to resolve this issue.
    Thank you.
    Regards,
    Dasarath

    >
    SQLNET.ORA Contents:
    ====================
    bash-2.03$ cat /var/opt/oracle/sqlnet.ora
    ENCRYPTION_WALLET_LOCATION=(SOURCE=(METHOD=FILE)(METHOD_DATA=(DIRECTORY=/dboracle/orabase/product/10.2.0/dbs/wallet/)))
    SQLNET.WALLET_OVERRIDE = TRUE
    SSL_CLIENT_AUTHENTICATION = FALSE
    SSL_VERSION = 0
    >
    You may want to replace ENCRYPTION_WALLET_LOCATION keyword with just WALLET_LOCATION in your sqlnet.ora file.
    EWL is used only for TDE but if you want to use external password store, you will have to use WALLET_LOCATION rather than ENCRYPTION_WALLET_LOCATION. However if you are going to use both TDE and external password respository, then make sure your sqlnet.ora file has both entries ENCRYPTION_WALLET_LOCATION as well as WALLET_LOCATION
    Regards
    Venkat

  • I need to install CC on a Macbook pro intel core 2 duo, but it says my system is not supported??

    help? is this not supported?
    Model Name: MacBook Pro
      Model Identifier: MacBookPro3,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 4 MB
      Memory: 4 GB
      Bus Speed: 800 MHz

    http://helpx.adobe.com/creative-cloud/system-requirements.html#System requirements
    Mac OS X v10.7, v10.8, v10.9 or v10.10

  • IChat wants nonexistent AIM screen name

    Hi everyone,
    I've opened an iChat account with no problems, using a .mac screen name. My father, whom I've been working with over the phone, tried the same thing. He has a .mac screen name, it's showing up and checked under "Accounts" in "Preferences", but when he tries to go online with it, he is prompted to enter an AIM screen name. The .mac name does not work here (with or without the extension)- he just keeps getting prompted as if he's trying to sign in using AIM and can't get out of the loop. Any ideas?
    Thanks!

    Hi,
    You can log in to the AIM Pages with an @Mac.com name by entering it in full.
    This is one such place https://settings.aim.com/ with the sign-in spot being top right.
    (it does not display the Screen name straight away but does if you enter/click on one of those button - it returns to this page).
    This will still use a check with the @Mac.com servers as to the password (which still needs to be 16 characters of less).
    Yes, if you were wondering, it does mean that in iChat you can choose AIM as the account type and enter a MobileMe or @mac.com name in full - in fact this is the only way you can use a MobileMe account in iChat 3 or earlier.
    6:44 PM Tuesday; March 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Why is my on screen name not changing

    Hi all
    I logged in and changed my login name yesterday [email protected], this worked ok
    I also changed my on screen name, but it has not changed.
    I saved it and when i go into my account preferences it has changed, but it has not changed on the upper right of my screen or it hasn't changed when i post any messages
    Help
    Thanks

    Why oh why are the easiest things in life becoming so difficult.
    It's not just the cost of a call, but the time and energy i have to put into this, when i already had a 15 minute
    chat online with support and they couldn't help. Plus the issue with downloading trials with the download manager
    which wasted 2-3 hours of my day to get the ftp links that could just be put on the web site instead..
    Can someone in Adobe just fix this without i having to call and explain everything again.

  • Table ctrl - no screen-name - hav groupid but not visible in Loop at screen

    Hi...
    In pa30, for a pernr, of infotype 0008, we have a table control.
    In that table control, i hav to hide a field. ex: bet01
    it has value..by default it will appear on the screen...
    Now I want this value not to appear on the screen.
    in loop at screen, i am not able to find the sceen-name(Q0008-bet01 or no Q fields...)
    It loops for all the p fields..and exits the loop.
    How can I hide the q fields..
    I have tried with groupids...but, in loop at screen unable to find the groupids...so no use..
    screen name and groupid are there for this field...
    Any solution???????????

    Hi...thanks for ur reply...
    Not that helpful...
    I hav the groupID..screen-name...
    But the problem is, the loop at screen is not going through this groupid or screen-name...
    And if u have any sample code, plz share it..
    I cant modify the data coming to table control...access problem...
    If u have anyother solution, please give it..Anyways thanks once again for ur reply!
    Experts, no solution??? No alternative???
    Edited by: Veeranji Reddy on Nov 13, 2008 3:22 PM
    Edited by: Veeranji Reddy on Nov 14, 2008 5:49 AM

  • Reference to database and/or server name in '' is not supported in this version of SQL Server

    Hello all
    I am using C# and ADO.NET (native) - Visual Studio 2013.
    I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
    Obviously there is a problem when doing this against SQL Azure,
    I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
    Interesting fact: With SQL Management Studio, the same query works.
    I need to know if this error is really a true one or not.
    If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
    Thanks and best regards
    Frank

    Hi,
    Here are my suggestions:
    1. Use partially qualified queries, because:
    a. from a security standpoint, you'd want to limit your login's access across the server instance
    b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
    If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
    However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
    SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
    Alex

Maybe you are looking for