Understanding ACNS test-url output

Have CCE-566 running 5.3.1. Using test-url http command for first time. Appreciated any help in understanding the resulting output.

Try:
http://www.cisco.com/en/US/partner/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008039624e.html

Similar Messages

Test URL

Hi Experts,
I am new to XI
I am doing a file to HTTP test scenario.I want to know is there any test URL where i could try to post ?

http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
this sud throw some light on it

[svn:osmf:] 14907: Adding comments, removing test URL.

Revision: 14907
Revision: 14907
Author:   [email protected]
Date:     2010-03-22 05:50:23 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding comments, removing test URL.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/html-template/index.template.html
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

Thanks for the architecture comments. I'm interested in this topic because ALARM brought me to arch (although I've replaced the raspberry pi with an Intel-based machine now).
Well, I'm afraid of starting some kind of flame war by suggesting this officially as a lowly arch noob. I'll leave it up to the people who might profit by something like this (i.e. ALARM – or maybe they don't care and are fine with the current solution, in which case the change is not required at all). For the record, I like the glob solution. It's more flexible than just 'all' and it's easier to memorize the difference between 'any' and '*' compared to 'any' and 'all'.
It turned out the "adding users" topic is not an issue, because I realized I can simply set "User=nobody / Group=audio" in the systemd unit file to get rid of root privileges while keeping the permission to play audio without logging in. I also set up a minimal Arch VM to test if gnome-icon-theme can be dropped. I found no problems without that package, so I think I'm now ready to upload the modified PKGBUILD (and related files) to the AUR.
I'll flag this topic as solved. Feel free to add more comments though. Thanks everyone

Testing speaker output levels...

Hi everyone!
I recently had my lcd replaced and in the process the local service provider messed up my subwoofer somehow and replaced that too. It works now but it doesn't seem to be as loud as before. Is there any way I can test the output levels of my speakers without just going by memory? As a note I do have a copy of the Apple Service Diagnostics cd and it passes...but I don't know if it's actually testing the speakers and/or their sound output level?
Thanks for the help,
Reg

See my answer to the other thread you opened. When you do that, you have a double conversion (first D/A, then A/D - though I don't know what actually happens when you use a capturing software like AudioHijack), you might create a hum etc.

ACNS multicast URL

ACNS generated multicast link (.nsc) launches WMP when using WCCP but does not work when using a CE/WAE as a proxy. When using a proxy and choosing the .nsc link, the browser just displays the text from the nsc link and does not launch WMP. ACNS 5.5
Thanks
Regards
Joe

Further testing resolved the issue by using a FQDN URL. "http://rootce.test.com/test123.nsc"
Regards
Joe

CRM survey suite - Test URL - Blank Screen

Hi All,
I generated the URL for a survey but when when I try to test it gives a blank screen.
The system I am testing is a system copy of another system. In the source system the URL works fine.
I have made changes in the xml file to point to the correct host, client and port number.
Could someone please help.
Thanks
S.

Hello Shabnam,
I faced a similar problem and this is the solution after which the URL starts working is as follows:
Refer note: 857535 and do the following:
TCode: se24 -- CL_SURVEY_CATSERVER
Execute method SET_CATSERVER_ABAP
Leave parameter USER empty.
Now check the survey URL will start working.
Regards,
Khushboo
<b>Do reward points !</b>

Test URL for CRM iPad app

Hi
Does anyone know of any test crm urls that can be used to demonstrate the functionality of the various CRM iPad apps? It seems that the only way we can try it out is to open up our existing CRM instance via IFD - we would rather
be able to first test the iPad functionality by pointing at a example CRM before we go to the trouble of opening up to the outside etc.
Thanks

You could sign up for a
free CRM Online trial.
Jason Lattimer
My Blog - Follow me on Twitter - LinkedIn

Didn't understand the program and output...

i have read this program from book but did not understand the program as well as output...
class TwoDArray {
public static void main(staing args[]) {
int twoD[] []= new int[4] [5];
int i, j, k = 0;
for(i=0; i<4; i++)
for(j=0; j<5; j++) {
twoD[i] [j] = k;
k++;
for(i=0; i<4; i++) {
for(j=0; j<5; j++)
System.out.print(twoD[i] [j] + " ");
System.out.println();
output is
0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
please let me know about program and its answer..

When posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, either use the "code" button at the top of the forum Message editor or place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
[/code]Here's your code. You also misspelled String:
class TwoDArray
    public static void main(String args[])
        int twoD[][] = new int[4][5];
        int i, j, k = 0;
        for (i = 0; i < 4; i++)
            for (j = 0; j < 5; j++)
                twoD[i][j] = k;
                k++;
        for (i = 0; i < 4; i++)
            for (j = 0; j < 5; j++)
                System.out.print(twoD[i][j] + " ");
            System.out.println();
}We can much better answer specific questions than general questions like this one. This program works because it stores numbers in a two dimensional array. Now key here is for you to be able to understand these creatures, and for this, I will refer you to the tutorials:
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/arrays.html
http://math.hws.edu/javanotes/c7/s5.html
http://www.cafeaulait.org/javatutorial.html#xtocid459715

How Test the output with Email

HI all,
Could you please help me how to test the email output type.
Now all out put was confiured with email.
Where I have to maintain my mail id to check weather that out put is working or not, Please provide the steps to to test then email scnerio.
Regards,
Muralikrishna

Dear Murali k
Check this setting
If your SD output configuration is set up correctly, an e-mail from SAP using medium 5 should go through just fine via SAPconnect (transaction SCOT). When it works, the external recipient should receive an e-mail with a PDF attachment containing the form image, regardless of whether it has been created via SAPscript or Smart Forms.
Depending on your output determination settings, this even can happen in the background, without any interaction with the SAP front end (e.g. for invoices created automatically by a batch job).
Typically, a failed send will be flagged in the message control table (NAST), and this table should be monitored closely. However, there are many reasons why a document hasn't gone through, and this can be the case with both outgoing faxes and e-mails from SAP.
The solution to both is the same: After identifying the failed document, re-send it manually by going inside it in change mode and repeating the appropriate output. If an obsolete customer e-mail address was the culprit, a customer master change would also be required, along with an audit of any docs recently created for this customer.
If any underlying data has changed since initial issuance, a re-sent document may not appear identical to the (failed) original.
Sometimes, as when address info has been corrected, this can be a good thing. After all, the new document is more accurate than the old one.
In other cases, such as when pricing info has changed, it might be a cause for serious concern.
There are several ways to deal with this concern:
1) Limit the types of changes allowed on certain docs after creation
2) Set up a doc image archive via ArchiveLink and re-issue output from there instead of from the current doc; or
3) For highly sensitive docs, consider a more secure delivery method
Hope this will helps you
Prem

Test Pattern Output on Zynq Zedboard HDMI

Hello,
I am working on a project where we will eventually display the output from an image sensor through the HDMI output on a Zedboard.
As a first step, I would like to build a simple project to test driving the HDMI output from an AXI stream. The system would look like this
Test Pattern Generator --> AXI4-Stream to Video Out --> HDMI Output Interface
^
|
Video Timing Controller -------------------|
My assumption is that if this system can be made to work, it would be a good starting point for building the final system.
I have attached the block diagram for this system in PDF format as well as the tcl file for generating the block in Vivado 2015.1.
The major issue is that the Video Output core will not lock (an issue that has been brought up a lot in the forums). I have tried to apply the various "not locking" solutions to this design without any success. Each time, I run a behavioral simulation for 3-4 frames to see if the lock output will go high.
A few notes:
1) The AXI tready signal from the Video Output core would not go high to trigger the test pattern generator unless I reset the Video Output core using the "locked" output from the Clocking Wizard block. A simple "not" gate is used to get the right polarity.
2) The system is configured for 1080p video (1920x1080). Everything is running on the same 148.5MHz clock derrived from the 100MHz system clock.
3) The Video Out core is configured as a Master. The gen_clken input on the Video Timing Generator is tied high.
Any suggestions on what is preventing the Video Output core from locking would be greatly appreciated.

Thanks for confirming that the setup looks good. In the process of generating some screenshots I discovered that the GND1 constant which was connected to the FID input was outputting 1 in the simulation. This was telling the video out block that it was always the second field of an interlaced video stream which was preventing it from locking.
No matter what I did, I coudn't get a constant connected to FID to output a logic '0'. I ended up uninstalling Vivado and reinstalling 2015.1 and it now seems to work.

Suggestions needed in test configurations output and input

Hi consultants,
I need your suggestions in this following case.
Problem explanation:
I need to take all the outputs generated from test configuration "A" due to execution
of several variants and fed to another test configuration "B" as input .
Queries:
1.Is it possible to get the output values from configuration "A" and fed as input to
configuration "B"without adding all the transactions available in test configuration "A"?
2.If yes,how we have to do that?
3.Is there any code available or settings that we need to do for getting values of
configuration "A" and using it in configuration "B"?
4.Please provide us some links to get more details?
Regards,
Alex.

Hi Alexander,
check out the STORE and RETRIEVE commands in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm">Help Portal</a>.
STORE allows you to write data to a special section of the log, which another script can collect using RETRIEVE and various selection criteria.
Hint: 2 configurations or 2 variants running under the same execution have the same log number, which you can use to retrieve data (special variable &LOGID).

Strange Test URL

Hi there,
I am new to iWeb.
I created a web site,and tried to publish to my domain abc.com
When I click Visit in iWeb 08 it takes me to abc.com/eli_test
There is no such URL.
I have filled out the correct domain in .mac account setting.
Can someone shed some light as to what is going on.
Many thanks
Eli

http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
this sud throw some light on it

Cannot understand/pipe mplayer log output

Hi,
I'm hoping to do something with dzen to build a status bar for mplayer. Initially it will be very similar to mplayer's OSD, but in a bar above the video, not over the top of the video.
When you run mplayer you get output in the terminal like this (I'm just interested/showing the last few lines):
VO: [xv] 540x432 => 576x432 Planar YV12
A: 3.6 V: 3.6 A-V: 0.000 ct: 0.040 0/ 0 6% 1% 0.3% 0 0
The second line constantly updates as the audio/video plays, and it's what I'm interested in.
If you pipe it you will not see that second line, why is that? If you pipe it through grep or awk for example, you will not see that line while mplayer is running; you might do at the end, but it's no use then.
Can someone explain why this line does not get piped?
Thanks

That's most likely because the tools you are piping to (you give awk and grep as examples) read line by line. Mplayer does not output a newline character, so the line is never "complete" until mplayer exits. Awk, grep, or any script with a "read line" command will block until mplayer appends the newline and exits.
You can write such a tool though - just don't wait for a newline. Mplayer can be piped through the following "repeater" that does absolutely nothing useful, but it does read and echo each character:
#include <stdio.h>
int main() {
int c;
while (c=getchar()) putchar(c);
return 0;
You can expand on this to do something with those characters. Alternately, you could even make a non-endline piping tool that would check if 'c' was equal to the terminal code to move back to the start of the line and replace that with a '\n'. This would allow you to use this ~10 line C program as an interpreter while doing everything else with grep, or awk, or any bash script.
I would not be surprised if mplayer also has an option to output in such a format, but I don't know it off hand.
EDIT: the following works as a translator. Pipe through this to your preferred tool or script:
#include <stdio.h>
int main() {
int c;
int p1=0,p2=0;
while ( (c=getchar()) !=EOF ) {
putchar(c);
if (c == 'J' && p1 == '[' && p2 == 27) {
putchar('\n');
fflush(stdout);
p2 = p1; p1 = c;
return 0;
Last edited by Trilby (2012-11-07 15:27:33)

Test Movie Output Warnings

I have two flash files of the same website -
Flash 1 - this has a newly added section that works
perfectly. I just realized that I updated this new section in the
incorrect website Flash file.
Flash 2 - So this second Flash file doesn't have this newly
added section (it's the actual version uploaded as the website),
but this file has pop up windows on a part of the website that work
perfectly. Although they are exactly similar in actions on Flash 1,
they do not work.
My quickest solution would be to revert to Flash 2 (with the
perfect pop-up windows), and add this new section of links as I
should have done to start with. Although this seems like it would
work out fine and quick, when I test the movie, the new section
doesn't work (links don't work) and I receive a warning saying some
files are not supported by Flash 5. This file has been saved as a
Flash 8 file.
Does this make sense to anyone? Is there a way to fix this?
Thanks.

Excellent - everything is working just as it should...
One last thing - and I promise it's the last -
I believe it is only to do with the action script. For my
text links, the action script is as listed in my above posts. They
work fine, only when they open, they are not in separate windows as
I would prefer. They open now, and when I click "Back" on the
browser, it takes me to the beginning of the website, and not the
links page.
Is there a way to change the action script so that these
pages open as separate windows so they can be closed when viewers
are finished?
Thank you again - I've learned more about Flash in the last
couple days than I ever have with books and other internet
help.

Understanding the DVI Dual output on the new 1900x1200 MacBook Pro

I am looking at increasing my desktop space by possibly purchasing one of the cheaper 28" VIEWSONIC VX2835wm 28" lcd monitors. Its a 1080P monitor, that claims "Digital HDMI input gives you the best possible connection to HD signals for movies, video and games. Multi-mode input technology supports both digital (HDMI or DVI) and analog (VGA) signals.". However, under the inputs it claims the digital is via HDMI only. I see there are DVI to HDMI cables, and since this display doesnt have a DVI port, but again claims multimode input technology, is a DVI to HDMI cable how I would hook this up to my new MacBook pro with 1922x1200 dual link dvi capabilities?
Thanks in advance..

The dual-link DVI on the MBPro can successfully sync to 1900x1200 via DVI to HDMI (HDCP Compliant) adapter cable, no one answered it here, but I got somoene from viewsonic contacting me back. For some reason, viewsonic has a whole 20, 21, 22, 24, and 28 inch series (1650x1050 for 19-24) and 1900x1200 for the 28" series that all have DVI over HDMI adaptor... weird.. but works...

Understanding ACNS test-url output

Similar Messages

Maybe you are looking for