Understanding an ABAP Program RMCBNEUA
Hi guys,
I need to document a program RMCBNEUA.All the comments given in the program are in deutch.How do I understand the code since I am not an expert in ABAP.
Regards
Ankit Harish
goto google site and get one of the language converter. Paste your code in the area and convert the data from deutch to english. Now, you can check and code the document accordingly..
Similar Messages
-
How to finish ABAP program in the process chains
Hello All,
we have one ABAP program in the process chains which was created in the BW system only.
this program we are using in the synchronous mode. according to my understanding we can not capture the failure of the ABAP program when it is in the synchronous mode.
but i found a way through one this forum topic to capture the failure of the program through asynchrous mode by calling a function module RSPC_ABAP_FINISH but it was with the R/3 program in BW.
can we use the same function module for BW program also.
kindly let me know what steps we need to follow for the BW program in the process chains to capture the failure status.
Regards,
Ala.Hi Ala,
we created an own processtype, look at this HowTo: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/45d8a990-0201-0010-a290-f22083728179
and than also an abap which can end red or green:
PARAMETERS: red RADIOBUTTON GROUP radi,
green RADIOBUTTON GROUP radi.
IF NOT green IS INITIAL.
MESSAGE i162(00) WITH 'Status' 'Green'.
ELSE.
MESSAGE e162(00) WITH 'Status' 'Red'.
ENDIF.
with i-message process ends green, with e-message process ends red.
/manfred -
Tcode to find the load in server is 20 users run a particular ABAP program
I want to find the load in the SAP Server (in terms of CPU Usage, memory usage) if a particular Query or ABAP program is executed by 20 users.
Pls let me knwo the Tcode for the same
As per my understanding ST03 can be used to view the report of previous information only.Balaji
You have the analyze the load while 20 users executing the following transaction code.
OS06 - operting system monitor and click on detailed analysis where you can monitor the various instances
if do you find the other transaction which will show you load of current program being used by 20 users, please share with the expert communitiy to help to other users.
REgards
Anwer Waseem -
Abap program in pc failed and aggregation failed
hi friends,
we are using process chains and one of the proces chain has an abap program which activates and
fills the aggregates. its failed and for yesterday.. can you please help on best action? <removed by moderator>
regards,
Bhavani
Edited by: Siegfried Szameitat on Nov 7, 2008 9:46 AMHi Sanjai,
Check out what your ABAP program is doing. It is really odd that though the job called for invoking the ABAP program is not finished ... the next process is starting. If my understanding is wrong please correct me here.
How can you say that the next process is starting before the current process finishes?
Best regards,
Kazmi -
ABAP program to neutralize 0Unit value and 0quantity value
Hi all,
I'm not expert in ABAP, and i would like implement a small abap program (routine)in my cube.
I would like neutralize the 0UNIT value and 0QUANTITY value only when 0VTYPE = 1 or 2 :
<b>in other words, if 0vtype = 1 or 4 then 0unit = space and 0quantity = 0
b]
Can you tell me please <b>how and where</b> write the ABAP program please ?
Message was edited by:
Pontoise Pontoise
Message was edited by:
Pontoise PontoiseHi,
I amnt able to understand your requirement. But the code for which you asked is simple.
If 0vtype = 1 or 0vtype = ' '.
0unit = space.
0quantity = 0.
endif.
Regards
Aneesh. -
Question on security in ABAP program with ITS. Please help!
Hi Experts,
I have a question on security in ABAP program.
I have a ABAP program which has a transaction attached.
I have added authorization check in ABAP program(Progran level security).
I have also attached the authorization object to the transaction.(Transaction level security)
If an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
If I have web enabled my ABAP program via SICF (in other words, ITS). Then when I try to run my ITS service in the browser will the transaction level authorization fire? or Will the program level authorization fire?
Please help me understand this security aspect.
Thanks
Gopal<i>I have added authorization check in ABAP program(Progran level security).</i>
i assume you have coded call authority within the program.
<i>If an end user runs the transactionm, then which authorization check will fire first?</i>
if he calls the transaction, then first authorization attached to the transaction will be checked.
but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
<i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
it depends,
if you are calling your transaction like
webgui/?~transaction=<tcode> then first tcode level authorization.
if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
Regards
Raja -
Question about using TVARV in an ABAP program
Hello gurus, Im sorry about the silly question.
I have a question about using TVARV in an ABAP program.
A program is presenting a problem and I think that in this code:
SELECT SIGN OPTI LOW HIGH
FROM TVARV
INTO TABLE R_1_163431035_VELOCIDADE
WHERE NAME = '1_163431035_VELOCIDADE'
AND TYPE = 'S'.
IF ZMM001-VELOCIDADE_B IN R_1_163431035_VELOCIDADE AND
ZOPERADORAS-OPERADORA = 'ABCD' AND
ZMM001-MATERIAL IN R_1_163431035_PRODUTO.
ELSE.
ENDIF.
What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
I am new to ABAP programming, but I have a lot of XP in other programming languages and this makes no sense to me.
Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
If this is a bad way to program, what would be the best way?
Regards
Ronaldo.Hi Ronaldo,
But in this case, the range is not empty, there are 17 records, in this way.:
For the column "SING" all values are "E"
It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
Not silly ;-). Yes they work differently.
More info here:
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
BR
Sandra -
Full Load and delta loads of HR Data using ABAP Program
Hi All,
I need to write an ABAP program that will pull some HR data from some of the infotypes.When i run it for the first time it should pull all the data for all the employees but in the subsequent runs it should run only the delta changes
for example
inital run is on 04/30 it should pull all the data for all the employees
next run 05/02 then it should pull onlly the infotypes for which there is a change between 04/30 and 05/02
Please let me know the solution
Thanks
Bala DuvvuriRob,
I understand that I need to AEDTM field but the problem is
during the initial load i will not have any control date stored in the z table so i will fetch all the records using the select queries on various infotypesin the if condition but the problem is i need to repeat the same queries by adding the AEDTM condition in the else condition where control date is not initial(not an initial load) so it will be a duplicacy of all the select queries.
is it a good programming style?please let me know your thoughts on this
if p_ctrl is initial " Initial load
select queries
else " subsequent runs
same select queires with AEDTM condition
endif.
Thanks
Bala Duvvuri -
I am using ABAP stage in Datastge job and new requirement is only add a new column where the column length is 25.
Previously the program was below
IF d_len < 16000.
d_pack+d_offset(77) = it_1.
d_offset = d_offset + 77.
d_len = d_offset + 77.
but now after adding new column
change the program as
IF d_len < 16000.
d_pack+d_offset(102) = it_1.
d_offset = d_offset + 102.
d_len = d_offset + 102.
it's not working if I use below code then it works but getting data small amount with some data is shift from one colum to another.
IF d_len < 16000.
d_pack+d_offset(102) = it_1.
d_offset = d_offset + 102.
d_len = d_offset + 102.
d_pack+d_offset(77) = it_1.
d_offset = d_offset + 77.
d_len = d_offset + 77.
Ant idea how to solve the issueHi,
Just a wild guess... is this code normally not something that is generated by some IBM solution..? Meaning - something not to be messed with..? Because:
"D_LEN – Is a variable used during generation of the ABAP program. The value is set automatically based on the total length of columns in the SQL query. If this value is less than 16000, the ABAP program will concatenate the record before making an RFC call. If it is greater than 16000, each line will be a RFC call, which will create many RFC calls that will negatively effect performance." --Understanding ABAP extract data processing with InfoSphere DataStage Pack for SAP R/3 and it's performance
cheers
Jānis -
How do you take care of performance issues in your abap programs?
HI
and you can see this also
Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
Select Queries
SQL Interface
Aggregate Functions
For all Entries
Select Over more than one Internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
Points # 1/2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
4. For testing existence , use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
5. Use Select Single if all primary key fields are supplied in the Where condition .
Point # 1
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
Point # 2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Point # 3
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields . In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
Point # 4
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
Point # 5
If all primary key fields are supplied in the Where condition you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements contd.. SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
2. For all frequently used Select statements, try to use an index.
3. Using buffered tables improves the performance considerably.
Point # 1
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
SET SEATSOCC = SEATSOCC - 1.
Point # 2
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
AND CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
Point # 3
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
Select Statements contd Aggregate Functions
If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
Maxno = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxno.
Maxno = zflight-fligh.
Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements contd For All Entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES
Check that data is present in the driver table
Sorting the driver table
Removing duplicates from the driver table
Consider the following piece of extract
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Endif.
Select Statements contd Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
3. Instead of using nested Select loops it is often better to use subqueries.
Point # 1
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
WHERE DOMNAME = DD01L_WA-DOMNAME
AND AS4LOCAL = 'A'
AND AS4VERS = DD01L_WA-AS4VERS
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
AND DDLANGUAGE = SY-LANGU.
ENDSELECT
Point # 2
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Point # 3
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
INTO SFLIGHT_WA
FOR ALL ENTRIES IN T_SPFLI
WHERE SEATSOCC < F~SEATSMAX
AND CARRID = T_SPFLI-CARRID
AND CONNID = T_SPFLI-CONNID
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
WHERE SEATSOCC < F~SEATSMAX
AND EXISTS ( SELECT * FROM SPFLI
WHERE CARRID = F~CARRID
AND CONNID = F~CONNID
AND CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK' )
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
1. Table operations should be done using explicit work areas rather than via header lines.
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
<WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
WA-FLAG = 'X'.
MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
ADD: WA1-VAL1 TO WA2-VAL1,
WA1-VAL2 TO WA2-VAL2.
MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
DELETE ITAB.
ELSE.
PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP. -
Schedule/Execute POWL Query in Background or via ABAP Program
Hi all,
I would like to know if there is any chance/possibilities to schedule/execute the POWL Query for example the Query ID
"SAPSSRM_R_CENTRALCONFIRM_01_01" Confirmations Pending in the background to output report.
Or perhaps there is anyway I can make use of the logic within the Query ID above in an ABAP program?
The main reason is that I need create a Confirmations Pending report and sent out to relevant SC Creator and the quickest way is to make use of the existing query of above.
Many thanks and regards,
Hon LeongHi Hon Leong,
please first check POWL - Web Dynpro ABAP - SCN Wiki to understand, how POWL works.
You need to find a Feeder Class of your query and execude GET_OBJECTS Method to get the result list.
For example you can check report POWL_WLOAD or function module POWL_QUERY_REFRESH.
Regards
Konstantin -
Run info package from an ABAP program
Hi all,
I need to run an info-package based on values entered by user in a selection screen.
How can I implement these values in the info-package using the abap program?
I've searched the forum and found FM RSSM_SDL_START_INFOPACKAGE and BAPI_IPAK_START but there is no option to enter the selections, also I have found the option to select var type 6 - abap code in the info-package (tab data selection) but didn't understand if I can connect it to an external abap program.
Thanks,
HagitAlong with BAPI_IPAK_START, you need to use the FM "BAPI_IPAK_CHANGE"...
there you have the table with structure BAPI6109SEL, which is used to pass selections to infopackage at the run time...
Sequence u can use is BAPI_IPAK_START, then BAPI_IPAK_CHANGE and finally BAPI_IPAK_START as per ur requirements... -
Pls help to understand this routine program
Pls help to understand this routine program written in transformation level for a field.
Data a Type /bic/oizsnote_2.
Data: l_len type i,
l_time type i.
Move source_fields-zztdline+60(60) TO a.
l_len = STRLEN(a).
DO l_len TIMES.
IF a+l_time(1) CN
',<>?/:;"''ABCDEFGHIJKLMNOPQTRSTUVWXYZ abcdefghijklmnopqrstuvwxyz!%^&' & '*' & "()__+=12346567890'
a+l_time(1) = '~'.
Endif.
l_time = l_time + 1.
enddo.
replace all occurrences of '~' in a with space.
Result = a.
not having much exposure in ABAP programming.
RajIn addition to the above to posts..
HI Raj,
Your routine is used to remove the invalid characters.
IF A+l_time(1) CN
A is a Char which contains the data .*
I_time is used for iteration(itu2019ll check each char by char in a word/Sentence).
*CN u2013 Contains not
,?/:;"''ABCDEFGHIJKLMNOPQTRSTUVWXYZ abcdefghijklmnopqrstuvwxyz!%^&' & '*' & "()__+=12346567890.
These are the Valid chars and numbers which will be accepted by BW system, System will throw an error only when load receives a char which is not there in the above. And that char will be treated as a Invalid Char.
A+l_time(1) = '~'.
What ever the special/Invalid char appears in the load apart from the above mentioned, system will convert them to u2018~u2019
REPLACE ALL OCCURRENCES OF '~' IN a WITH space.
CONDENSE A.
System will replace all the ~ with space, then condenses the space.
You can do this using RSKC transaction instead of going for routine. -
How to read an IDoc with an ABAP program?
Hi experts!
I am new to SAP and I need to read an IDoc with an ABAP program... how to do it?
Maybe it is possible to read an IDoc into inner table...?
Hellpful answers and advices will be rawarded.
Regards,
Mindaugas.hi
I understand your issue, to pickup an IDOC flat file & post it to R/3 (with or without mapping).
There is no straight forward solution but there are some ways (Normal way of Working as of now ?!!!) provided in the "How to"
check this link
https://websmp101.sap-ag.de/nw-howtoguides
and look for this guide
How To Convert Between IDoc XML and Flat Files in XI.30
Probably you need to automate this using some programs,
- Create an ALE port of type File
using transaction WE21 on your
Integration Engine.
- Run report RSEINB00 on your
Integration Engine. The report will
upload the file, filter the IDoc header
data, perform the conversion to IDoc
XML and put the data into the
pipeline of the Integration Server.
Therefore it is crucial, that the IDoc
control record data is populated
correctly and corresponds to the
adapter-specific identifiers of your
sender service. Once the message
is put successfully into the pipeline
of the Integration Server, the file is
deleted.
Hope this fixes your issue
regards
ravish
<b>plz dont forget to reward points if helpful</b> -
hi all,
i need to design flow chart for checking for a program whether it satifies the abap coding standards or not. who to do it. if possible send me graphical representations [flow charts] or links to find programming standards.
some of my requirements in that folw chart are
1. how to recognize a blank space in a given program,
2. how to recognize a comment,
3. how to check wheteher a keyword is used or not,
4. how to identify the ' :' symbol
thanks & regards,
suresh babu aluri.plz go through this documementaion,
i think its helpful.
ABAP Programming StandardsContents
1. Objective 5
2. Naming Conventions 5
2.1 Codes for naming conventions 5
2.1.1 Module Codes 5
2.1.2 Free text 6
2.2 Naming Convention of Development Objects 6
2.2.1 Package 6
2.2.2 Executable Program 6
2.2.3 BSP Application 7
2.2.4 Logical Database 8
2.2.5 SAP Scripts /Smartforms 9
2.2.6 Idocs 9
2.2.7 Transaction Code 10
2.2.8 Function Groups 10
2.2.9 Dictionary Objects 11
2.2.10 Message Class 11
2.2.11 Enhancement Projects (User Exits) 11
2.2.12 LSMW Objects 12
2.2.13 Classes 12
2.2.14 BOR Object Types 13
2.2.15 Screen / Transaction Variants 13
2.2.16 Area Menu 13
2.3 Naming of Sub-Objects 13
2.3.1 Program Sub-Objects 13
2.3.2 SAP Script /Smartform sub-objects 14
3. General Programming Guidelines 14
3.1 Modification Logs 14
3.2 Program Organization 15
3.2.1 Executable Programs 15
3.2.2 Dialog Programs 15
3.3 Package 15
3.3.1 Adding Components to existing objects 15
3.3.2 Creation of New Objects 15
3.4 Program Messages 15
3.4.1 Adding Messages to existing landscapes 15
3.4.2 Creation of New Objects 16
3.5 Dictionary Objects 16
4. Structure of ABAP Programs 16
4.1 Type 16
4.2 Status 18
4.3 Authority Check 18
4.4 Program Structure 19
4.4.1 Declaration data for global data, classes and selection screens 19
4.4.2 Container for Processing Blocks 19
4.4.3 Calling Processing Blocks 20
4.5 Screen Flow Logic (Dialog Programs) 20
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic. 20
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction. 20
4.6 Main Program 20
4.6.1 Events 20
5. General Coding Standards 21
5.1 One command per line 21
5.2 Indented Source Code 21
5.3 Extended Syntax Check 21
5.4 Reusability and Modularity 21
5.5 Text Handling 21
5.6 Usage of System Variables 22
5.7 Chaining Statements 22
5.8 Common Routines 22
5.9 Dialog Messages 22
5.10 Function Keys 23
5.11 Enqueuing and Dequeuing Data Objects 23
5.12 Error Handling (SY-SUBRC) 23
5.13 General Conventions and Hints 24
5.14 Parameters in Sub-Routines 24
6. Performance Standards 25
6.1 General Tips on Performance Tuning 25
6.1.1 Avoid Redundant code 25
6.1.2 Subroutine Usage 25
6.1.3 Case vs. Nested IF 25
6.1.4 Using the MOVE Statement 25
6.1.5 SELECT Queries 25
6.1.6 Using the READ statement 27
6.1.7 Hashed table 27
6.1.8 Transporting 28
6.1.9 Using LDB 28
6.1.10 Append Lines of 28
6.1.11 Use WHILE 28
6.1.12 DELETE <itab> WHERE 28
6.1.13 Using WHERE clause in LOOP .ENDLOOP 28
1. Objective
The objective of this document is to describe general programming guidelines, methodologies, Naming conventions and performance guidelines for all the programs developed for SAP Project.
2. Naming Conventions
This chapter describes the naming conventions to be followed for naming the programming objects for SAP project.
2.1 Codes for naming conventions
The variable portion of naming convention is given with Code ID given in angle brackets(<>). Use the following tables for replacing code IDs with codes in the object naming.
2.1.1 Module Codes
Code ID: mm
Code Description
FI Finance
CO Controlling Module
MM Materials Management
PP Production Planning
SD Sales & Distribution
QM Quality Management
PM Plant Maintenance
IM Inventory Management
WM Warehouse Management
BC Basis Module
BW Business Warehouse
WF Workflows (Master Data Management)
HR Human Resources
EBP EBP
PS Project Systems
PCP Synpro: Product Costing
PAP Synpro: COPA
DP APO : Demand Planning
SP APO : Supply Network Planning
DS APO : Production Planning & Detailed Scheduling
AT APO : Global ATP
TP APO : Transportation Planning/Vehicle Scheduling
CI Core Interface
LC Live Cache
2.1.2 Free text
Code ID: ffff
Developer should replace ffff with meaningful text. The text can be multiple words separated by underscore.
2.2 Naming Convention of Development Objects
2.2.1 Package
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Dev. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.2 Executable Program
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
3. The maximum permissible length for program name is 30 characters. However, the name should be restricted to 25 characters to accommodate appropriate Include naming as described in 2.2.2.
Examples:
Program Name Description
ZFI_VAT_RET FI: Report for VAT Return
ZMM_AUTO_GR MM: Automated Goods Receipt
ZSD_XX_STCK_SHORTAGE SD: Stock shortage report for stock allocation
2.2.2.1 Includes for executable programs
Naming Convention: Z<mm>_<ffff>_<Inn>.
Notes:
1. All includes of executable program will be prefixed by Z, followed by the same program name as described in 2.2.2 above.
2. Replace <Inn> with include type and sequence number. Use the following table for includes.
Include Type ID Description
TOP Top Include.
Fnn Subroutine pool (Forms)
Inn PAI Modules
Onn PBO Modules
Xnn Other Includes
The maximum permissible length for Include name is 30 characters.
Examples:
Include Name Main Program Name Description
ZFI_VAT_RET_TOP ZFI_VAT_RET FI: Report for VAT Return Top Include
ZFI_VAT_RET_F01 ZFI_VAT_RET FI: Report for VAT Return Forms
ZMM_AUTO_GR_TOP ZMM_FR_AUTO_GR MM: Automated Goods Receipt Top include
ZMM_AUTO_GR_F01 ZMM_FR_AUTO_GR MM: Automated Goods Receipt Forms
2.2.3 BSP Application
2.2.3.1 Main Application
Naming Convention: BSP Applications shall follow the same Naming Convention as Executable Programs i.e. Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
2.2.3.2 Pages & Controllers
Naming Convention: <ffff>
Notes:
1. Replace <ffff> with meaningful text, that adequately describes the function of the page/controller
2.2.3.3 Theme
Naming Convention: Z_<ffff>.
Notes:
1. Replace <ffff> with meaningful text
2.2.3.4 Mime Objects:
Naming Convention: <ffff>
1. A MIME Object can be logo for the company.
2. Replace <ffff> with meaningful text, that adequately describes the function of the MIME objects
2.2.3.5 Controller and Handler Classes:
See section Classes (Section 2.2.133)
2.2.3.6 BSP Extension
Naming Convention: Z_<ffff>
Notes:
1. Replace <ffff> with meaningful text
2.2.3.7 BSP Layout elements id
Label: lb_fffff
Input field: if_fffff
Button: b_fffff
Text Edit: te_fffff
Text View: tv_fffff
Radio button Group: rbg_fffff
Radio button: rb_fffff
Check Box Group: cbg_fffff
Check Box cb_fffff
Tray tr_fffff
Tabstrip ts_fffff
Tableview tab_fffff
1. Replace <fffff> with meaningful text
2.2.4 Logical Database
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text
3. The maximum permissible length for LDB name is 20 characters. However, the name should be restricted to 15 characters to accommodate appropriate Include naming
4. LDB Program and LDB Program Includes shall follow the naming convention Auto-Generated by SAP
2.2.5 SAP Scripts /Smartforms
Naming Convention: ZF<mm>_<ffff>.
Notes:
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text as illustrated in examples below.
Examples:
Form Name Description
ZFFI_EMP_CONF Employee Confirmation Letter
ZFFI_ANN_TO Annual Turnover Letter To Customers and Vendors
2.2.6 Idocs
2.2.6.1 Idoc Types
Basic Type :
Naming Convention : ZB<FFFF>NN
Notes:
1.Replace <NN> with sequence number.
3. Replace <ffff> with meaningful text.
Extension Type : ZX<Basic type name>_NN
Notes:
1. Replace <NN> with sequence number .
2.2.6.2 Message Types
Naming Convention : ZM<mm><ffff>.
Notes :
1. Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text .
2.2.6.3 Process Code
Naming Convention : Z<ffff>.
Notes :
1. Replace <ffff> with meaningful text ..
2.2.6.4 IDOC Segments
Naming Convention : Z1<ffff>.
Notes :
1.Replace <ffff> with meaningful text as illustrated in examples below.
2.2.7 Transaction Code
Notes:
1. The tcode name is provided by SAP TIN The Developer must write a mail to SAP Tin asking for the T-Code name with a filled form.
The form can be found at :
2.2.8 Function Groups
Naming Convention: Z<mm><ffff>
Notes:
1. Replace <mm> with relevant module code as given above
2. Replace <ffff> with meaningful text.
2.2.8.1 Function Group Include Programs
Naming Convention: LZ<Function Group><Inn>.
Notes:
1. All includes of Function Group program will be prefixed by LZ, followed by the Function Group name
2. Replace <Inn> with include type and sequence number. Use the values from the table given in 2.2.2.1
Examples:
Include Name Function Group Name Description
SAPLZMMPURCHASING ZMMPURCHASING F.Group-Purchasing: Main Program
LZMMPURCHASINGO01 ZMMPURCHASING F.Group-Purchasing: PBO
LZMMPURCHASINGI01 ZMMPURCHASING F.Group-Purchasing: PAI
LZMMPURCHASINGF01 ZMMPURCHASING F.Group-Purchasing: Forms
LZMMPURCHASINGTOP ZMMPURCHASING F.Group-Purchasing: Data Declarations
2.2.8.2 Function Modules
2.2.8.2.1 Normal Function Modules
Convention: Z_<mm>_<ffff>.
Notes:
1. Replace <mm> with relevant module code as given above.
2. Replace <ffff> with meaningful text.
2.2.8.2.2 IDOC Function Modules
Convention: Z_IDOC_<mode>_<msg type>.
Notes:
1. Replace <mode> with INPUT or OUTPUT depending on whether the function processes incoming or outgoing IDOC.
2. Replace <msg type> with the IDOC message type.
2.2.9 Dictionary Objects
Tables: Z<mm><ffff>
Structures: ZS<mm><ffff>
Views: ZV<mm><ffff>
Data Element: ZDE<mm><ffff>
Domain: ZDO<mm><ffff>
Table Type: ZTT<mm><ffff>
Type Group: Z<ffff>
Search Help: ZSH<mm><ffff>
Lock Object: EZ<mm><ffff>
Notes:
1. Replace <mm> with module code given above.
2. Replace <ffff> with meaningful text.
2.2.10 Message Class
Naming Convention: Z<mm>_<ffff>.
Notes:
1. Replace <mm> with Module codes given in section 2.1.1 above.
2. Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3. The maximum permissible length for development class is 30 characters
Examples:
Msg. Class Description
ZFI_AR FI: Account Receivables
ZCO_CCA CO: Cost Center Accounting
2.2.11 Enhancement Projects (User Exits)
Convention: Z<XX><nn>.
Notes:
1. XX is the application area code e.g. for sales it is SD etc.
2. 'nn' is one up number for one application area. It starts with 001.
3. Maximum length of the Project name is 8.
Example: The name of the SD enhancement project can be ZSD001.
2.2.12 LSMW Objects
2.2.12.1 Project
Naming Convention: ZM_<ffff>.
Notes:
1. 1. Replace <ffff> with meaningful text
2. The maximum permissible length for Project name is 16 characters. But please limit it to 12.
Example : ZM_VENDOR
2.2.12.2 SubProject
Naming Convention: ZM_<ffff>_<n>.
Notes:
Suffix Project name with a running sequence no.
Example : ZM_VENDOR_1
2.2.12.3 Object
Naming Convention: ZM_<ffff>_<n><n>.
Notes:
Suffix Subproject name with a running sequence no.
Example : ZM_VENDOR_11
2.2.13 Classes
Naming Convention: ZCL_[IM/DF/BSPCO/BSPHN/BADI]_<ffff>.
1. IM: Implementation Class;
DF: Definition Class
BSPCO: BSP Controller class
BSPHN: BSP Handler class
BADI : BADI implementation
2. Replace <ffff> with meaningful text: In case of Implementation classes, it should preferably be the same as that of the Definition Class
3. Example:
IMPLEMENTATION Class: ZCL_IM_REBATE_SETTL
DEFINITION: ZCL_DF_REBATE_SETTL
2.2.14 BOR Object Types
Object Convention Example
Supertype Z<ffff> ZLVAPPL
SubType Z<SuperType><nn> ZZLVAPPL01
Program <Subtype> ZZLVAPPL01
1. Replace <nn> with a running 2 digit serial Number
2. Replace <ffff> with meaningful text
2.2.15 Screen / Transaction Variants
Naming Convention: <tcode>_<ffff>
Where:
1. Replace <tcode> with the t-code that will be assigned to this Variant
2. Replace ffff with a meaningful text
E.g.:
For an SE16 variant for table KONA that will be used by T-Code Z_CH_SD_001:
Z_CH_SD_001_KONA
2.2.16 Area Menu
Naming Convention: Z<mm>_<Main Menu>_<Sub Menu> <ffff>
Where:
1. Replace <mm> with the Module code
2. Followed by the hierarchical position of the immediate parent of this Area Menu
3. Followed by a Meaningful text for this Menu
E.g.:
ZSD
ZSD_TAB
ZSD_TAB_VIEW
ZSD_TAB_UPDT
Notes:
1. Clusters of Transactions should be introduced as Sub-Menus rather than as Folders
2. As a gradual process, the current Clusters that exist as Folders should also be replaced with Sub-Menus
2.3 Naming of Sub-Objects
2.3.1 Program Sub-Objects
Naming of all the internal components of a program will be consistent across the project.
Naming Convention: <Prefix>ffff.
Notes:
1. Replace <Prefix> with the component prefix values given in the table below.
Program Component Prefixed by
Program Constants C_
Global Variables W_
Types Definition T_
Global Structures WA_
Global Internal Tables I_
Select-Options SO_
Parameters PO_
Table Type TT_
Field Symbols FS_
Ranges R_
Local Constants LC_
Local Variables L_
Local Static Variables LS_
Local Internal Tables LI_
Local Work Area LWA_
Local Range LR_
Field Groups FG_
Container CO_
Macro MA_
Important: The Same sequence as above must be followed in the Data declaration part of all the ABAP/4 programs.
2.3.2 SAP Script /Smartform sub-objects
Naming of all the internal components of a SAPScript/SmartForm shall follow the same convention as for Programs (2.2.2), with the addition of the Field Label on the FRS. E.g. if the FRS has labeled a field for Sales Order Number as Field 27 on the Layout, the variable name should be W_27_VBELN.
3. General Programming Guidelines
3.1 Modification Logs
At the top of every ABAP Object Modified by a Developer, there should be a Modification Log Every Line Created/Changed by the developer should be Identifiable by the TR Number.
ABAP Patterns: Following Patterns should be used for Uniform ModLogs:
Nature of Change Pattern to Use
New Development ZZNEWPROG
In-Line Logs ZZLINE
Modification Logs at the Top of Object ZZMODLOG
3.2 Program Organization
All the programs will be organized as described below.
3.2.1 Executable Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
3.2.2 Dialog Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
PBO Include: Include for PBO Modules
PAI Include: Include for PAI Modules
3.3 Package
All the related objects within a sub-module of SAP will be developed under a single Package.
3.3.1 Adding Components to existing objects
When adding new workbench components to existing Objects, the same Package will be used as has been used for the existing Components
3.3.2 Creation of New Objects
When creating new Objects or new Sub-lanscapes, Packages used should have the Naming convention as in Section 2 Above
3.4 Program Messages
All the messages within a sub-module of SAP will be grouped under a single Message Class.
3.4.1 Adding Messages to existing landscapes
When adding new messages for existing Objects, the same Message Class will be used as has been used for the existing Objects
3.4.2 Creation of New Objects
When creating new Objects or new Sub-landscapes, Message classes used should have the Naming convention as in Section 2 Above
3.5 Dictionary Objects
Whenever you create a Z table in system always include MANDT field as the first field, except when the table contains client independent data. Also create the table with attribute Data Class as USER.
4. Structure of ABAP Programs
4.1 Type
When an ABAP program is run, its processing blocks are called. ABAP programs are controlled from outside the program itself by the processors in the current work process. For the purposes of program flow, we can summarize the screen processor and ABAP processor into the ABAP runtime environment. The runtime environment controls screens and ABAP processing blocks. It contains a range of special control patterns that call screens and processing blocks in certain orders. These sections are also called processors. When a ABAP program is run, the control passes between various processors.
In the R/3 System, there are various types of ABAP program. The program type determines the basic technical attributes of the program, and must be set when created. The main difference between the different program types is the way in which the runtime environment calls its processing blocks.
When an application program is run, it must at least call the first processing block from outside the program, that is, from the runtime environment. This processing block can then either call further processing blocks or return control to the runtime environment. When an ABAP program is started, the runtime environment starts a processor (dependent on the program type), which calls the first ABAP processing block.
The following program types are relevant to application programming:
Type 1
Type 1 programs have the important characteristic that they do not have to be controlled using user-defined screens. Instead, they are controlled by the runtime environment, which calls a series of processing blocks (and selection screens and lists where necessary) in a fixed sequence. User actions on screens can then trigger further processing blocks.
Type M
The most important technical attribute of a type M program is that it can only be controlled using screen flow logic and run via a transaction code which is linked to the program and one of its screens (initial screen).
ABAP programs with type M contain the dialog modules belonging to the various screens. They are therefore known as module pools.
Type F
Type F programs are containers for function modules, and cannot be started using a transaction code or by entering their name directly.
Type F programs are known as function groups. Function modules may only be programmed in function groups. The Function Builder is a tool in the ABAP Workbench that is used to create function groups and function modules. Apart from function modules, function groups can contain global data declarations and subroutines. These are visible to all function modules in the group. They can also contain event blocks for screens in function modules.
Type K
Type K programs are containers for global classes in ABAP Objects. Type K programs are known as class definitions. The Class Builder is a tool in the ABAP Workbench that can be used to create class definitions.
Type J
Type J programs are containers for global interface in ABAP Objects. Type J programs are known as interface definitions and are created in the Class Builder.
Type I
Type I programs - called includes - are a means of dividing up program code into smaller, more manageable units. The coding of an include program can be inserted at any point in another ABAP program using the INCLUDE statement. There is no technical relationship between include programs and processing blocks. Includes are more suitable for logical programming units, such as data declarations, or sets of similar processing blocks. The ABAP Workbench has a mechanism for automatically dividing up module pools and function groups into include programs.
4.2 Status
P = SAP standard production program
K = Customer production program
S = System program
T = Test program
Application
Categorize the program according to the purpose it fulfills.
4.3 Authority Check
Authority checks will be carried out as given in the respective FRSs.
4.4 Program Structure
ABAP programs are responsible for data processing within the individual dialog steps (ie. events) of an application program. This means that the program cannot be constructed as a single sequential unit, but must be divided into sections that can be assigned to the individual dialog steps. To meet this requirement, ABAP programs should have a modular structure. Each module is called a processing block. A processing block consists of a set of ABAP statements. When a program is run, effectively a series of processing blocks is called. Therefore, they should not be nested but modularized.
Each ABAP program consists of the following two parts:
4.4.1 Declaration data for global data, classes and selection screens
The first part of an ABAP program is the declaration part for global data, classes, and selection screens. This consists of:
All declaration statements for global data. Global data is visible in all internal processing blocks and should be defined using declarative statements that appear before the first processing block, in dialog modules, or in event blocks. Local data should not be declared in dialog modules or event blocks.
All selection screen definitions.
All local class definitions (CLASS DEFINITION statement). Local classes are part of ABAP Objects, the object-oriented extension of ABAP.
Declaration statements which occur in procedures (methods, subroutines, function modules) form the declaration part for local data in those processing blocks. This data is only visible within the procedure in which it is declared.
4.4.2 Container for Processing Blocks
The second part of an ABAP program contains all of the processing blocks for the program. The following types of processing blocks are allowed:
1. Dialog modules (no local data area)
2. Event blocks (no local data area)
3. Procedures (methods, subroutines and function modules with their own local data area).
Whereas dialog modules and procedures are enclosed in the ABAP keywords which define them, event blocks are introduced with event keywords and concluded implicitly by the beginning of the next processing block.
All ABAP statements (except declarative statements in the declaration part of the program) are part of a processing block. Non-declarative ABAP statements, which occur between the declaration of global data and a processing block are automatically assigned to the START-OF-SELECTION processing block.
4.4.3 Calling Processing Blocks
Processing blocks can be called from either the ABAP program or using ABAP commands which are themselves part of a processing block. Dialog modules and event blocks are called from outside the ABAP program. Procedures are called using ABAP statements in ABAP programs.
Calling event blocks is different from calling other processing blocks for the following reasons:
An event block call is triggered by an event. User actions on selection screens and lists, and the runtime environment trigger events that can be processed in ABAP programs. Define event blocks for the events that the program needs to react to (whereas a subroutine call, for example, must have a corresponding subroutine). This ensures that while an ABAP program may react to a particular event, it is not forced to do so.
4.5 Screen Flow Logic (Dialog Programs)
4.5.1 Place the AT EXIT COMMAND at the beginning of the flow logic.
Example:
PROCESS AFTER INPUT
MODULE EXIT_1170 AT EXIT-COMMAND.
MODULE PAINT_1170.
4.5.2 Use FIELD and CHAIN statements to keep fields in error open for correction.
Example:
PROCESS AFTER INPUT.
MODULE EXIT_1170 AT EXIT-COMMAND.
CHAIN.
FIELD BTCH1170-JOBNAME.
FIELD BTCH1170-USERNAME.
FIELD BTCH1170-FROM_DATE.
FIELD BTCH1170-FROM_TIME.
MODULE PAINT_1170.
ENDCHAIN.
4.6 Main Program
4.6.1 Events
The Program MUST NOT be coded without the use of Proper Coding blocks
Initializations
Top-of-page during line-selection
At Selection-Screen
At Line-Selection
At User-Command
At Pfn
Start-Of-Selection
Top-Of-Page
Get
End-Of-Page
End-Of-Selection
NOTE: The coding for each event should be logically split into forms (subroutines). That is to say, each event will comprise mostly of PERFORM statements.
5. General Coding Standards
5.1 One command per line
Each ABAP/4 command consists of a sentence ending with a period. Multiple commands can be on one line; however, as a standard start each new command on a new line. This will allow for easier deleting, commenting, and debugging.
5.2 Indented Source Code
The ABAP/4 editor has a "Pretty Printer" command to indent by 2 positions specific lines of code and add subroutine comments. Event keywords are typically not indented.
5.3 Extended Syntax Check
Extended Program Check (EPC) to be done on each object to make sure the code is Syntactically correct. There should be no Error/warning messages in the code.
5.4 Reusability and Modularity
If a block of code is executed more than once, it should be placed in a subroutine at the bottom of the code. This makes the code more readable, requires less indentation, and is easier to debug since the debugger can jump through an entire subroutine via a PF key. Also, when possible parameters should be passed to and from subroutines to make the purpose easier to understand and reduce the need for global variables. Always document the purpose of each parameter.
5.5 Text Handling
Text elements must be used to display any text messages.
5.6 Usage of System Variables
The system variables should be used wherever possible. The SY-SUBRC is to be checked after any function call, selection operation, etc.
5.7 Chaining Statements
Consecutive sentences with an identical beginning shall be combined into a chained statement.
Example:
Instead of the statements
MOVE SY-MANDT TO D00001-MANDT.
MOVE SY-LANGU TO D00001-SPRAS.
A chained statement shall be used
MOVE:
SY-MANDT TO D00001-MANDT,
SY-LANGU TO D00001-SPRAS,
SY-UNAME TO D00001-BNAME.
5.8 Common Routines
Standard sub-routines should be implemented as FUNCTION's rather than a FORM (ie. SUBROUTINE). A FUNCTION is easier to maintain and can be easily tested without a calling program. Standard SAP function modules are also available and the function library should be used to check if function modules already exist for a function that needs to be performed i.e.POPUP_TO_CONFIRM_LOSS_OF_DATA etc.
Includes can also be created for re-usable or common code e.g. common data declaration statements.
5.9 Dialog Messages
Dialogue messages are stored in table T100. Programmers shall check to see if an appropriate message exists before adding a new message. Programs shall use the message-id which corresponds to the SAP module that the program most relates to.
5.10 Function Keys
PF-keys should be programmed to execute functions where required. SAP Standard function keys should be used where appropriate. The most commonly used buttons should be displayed as pushbuttons in the application toolbar.
5.11 Enqueuing and Dequeuing Data Objects
All database objects being processed by a program, for purposes other than for display, shall be enqueued before such processing is executed. If the enqueue is unsuccessful, then a message shall be returned stating why the enqueue was unsuccessful.
Enqueue and Dequeue objects should be created via the data dictionary.
5.12 Error Handling (SY-SUBRC)
Return codes shall always be checked immediately after an event which returns a code.
Eg. Function calls, Select statements, Updates etc.
The value of SY-SUBRC is 0 when successful and generally produces a value of 4 when unsuccessful (there are a few exceptions).
Therefore, rather check SY-SUBRC with:
IF SY-SUBRC <> 0
than with
IF SY-SUBRC = 4 (which is redundant and makes the system do a double check)
Error messages displayed to the user must be clear and descriptive.
Remember to group related / dependant steps together and to Rollback all changes for steps in that group should any one of them fail, thus maintaining the integrity of the system.
Check whether an Error Log, (file), must be produced by your program and if so check on the format of the file.
If any Error Logging is done to a custom table in the database then make sure this table is maintained and monitored correctly. (Dev. Note)
Transaction SE91 provides the facility to create and utilize messages in their appropriate message class. Elaborate on the message if necessary, using the long text documentation for that message number.
5.13 General Conventions and Hints
There should be NO hard coding of values in programs easy maintainability
For amounts, use the CURRENCY command in write statements to automatically convert fields into their correct decimal format. The currency specified in the write statement is treated as a key for the table TCURX. If no entry exists for the currency specified, the system assumes two decimal places.
For quantities, use the UNIT command in write statements to automatically convert fields into their correct decimal format. The contents of the unit specified are used on table T006. If no entry exists for the unit specified, the formatting has no effect.
Use the LIKE statement as often as possible to declare DATA variables instead of an explicit TYPE declarations.
Try to use the INCLUDE statement with standard SAP structures and tables for your structures and internal tables where possible. If you use the include statement to include other program components in your code then document what those components are, what they do and how to use them.
Try to make use of standard SAP Function Modules wherever possible rather than building your own. Use the pull down functionality in transaction SE37 to find suitable standard function modules.
Make use of the SAP PATTERN tool to automatically insert the standard code for:
CALL FUNCTION
MESSAGE ID
SELECT*FROM
PERFORM
AUTHORITY-CHECK
WRITE
CASE
CALL DIALOG
The standard date format to use is DD/MM/YYYY. (Dev. Note)
The standard time format to use is HH:MM:SS.
5.14 Parameters in Sub-Routines
Naming convention for Parameters in subroutine is P_
6. Performance Standards
6.1 General Tips on Performance Tuning
6.1.1 Avoid Redundant code
Avoid leaving "dead" code in the program. Comment out variables that are not referenced and code that is not executed. To analyze the program, use the Program Analysis function in SE38 -> Utilities -> Program Analysis.
6.1.2 Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called.
Example:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
6.1.3 Case vs. Nested IF
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
6.1.4 Using the MOVE Statement
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
6.1.5 SELECT Queries
The performance of any ABAP program mainly depends on the ABAP Queries used in it. More optimum the queries , better the performance. Take care of the points mentioned nin the following sections while writing any ABAP queries.
6.1.5.1 Using all the keys in SELECT statement
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. The SELECT * command is to be avoided everywhere.
6.1.5.2 Fetching Single Record
If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If all the keys are not available, we should use SELECT UPTO 1 ROWS if we are interested only in the first record.
6.1.5.3 Avoid SELECT-ENDSELECT
Selecting data into an internal table using an array fetch versus a SELECT-ENDELECT loop will give at least a 2x performance improvement. After the data has been put into the internal data, then row-level processing can be done.
Example:
select ... from table <..>
into <itab>
where ...
loop at <itab>
<do the row-level processing here>
endloop.
6.1.5.4 Using Indexs
Use indexes wherever possible. Tune the Query so that optimum Indexing will happen.
6.1.5.5 Provide all the keys
Give as many keys as possible in the WHERE clause to optimize the database fetching. Use the Index fields in the first position to optimize performance.
6.1.5.6 Avoid INTO CORRESPONDING
Avoid using INTO CORESPONDING FIELDS of Table. Instead, explicitly mention the fields. Else, The Table Fields should be in the same sequence as the selection
6.1.5.7 SELECT statement inside LOOP
Do not write SELECT statements inside the loop. Instead, use the FOR ALL ENTRIES Command
Before using FOR ALL ENTRIES command, check that the
1. Corresponding Internal table is not empty. If the Internal table is empty, the statement will select ALL the entries in the Database
2. The Internal table is sorted by the Filed used in the Where Clause: This makes selection faster
6.1.5.8 Nested SELECT statement
Avoid Using nested SELECT statements. Instead, make use of different internal tables to fetch the data, and Use Nested LOOPS to read them.
6.1.5.9 Select Distinct
Whenever its possible avoid SELECT DISTINCT, instead select data into internal table, sort and use DELETE ADJACENT DUPLICATES
6.1.5.10 Use of OR in Where Clause
Do not use OR when selecting data from DB table using an index because The optimizer generally stops if the WHERE condition contains an OR expression.
e.g.
Instead of
SELECT * FROM spfli WHERE carrid = LH
AND (cityfrom = FRANKFURT OR
city from = NEWYORK)
Use
SELECT * FROM spfli WHERE (carrid = LH AND cityfrom = FRANKFURT)
OR (carrid = LH AND cityfrom = NEWYORK).
6.1.5.11 Order By
ORDER BY will Bypass buffer. So, performance will decrease. If you want to sort data, it is efficient to SORT them in INTERNAL TABLE rather than using ORDER BY. Only use an ORDER BY in your SELECT if the order matches the index, which should be used.
6.1.6 Using the READ statement
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. The table needs to be sorted by the Key fields and the command READ TABLE WITH KEY BINARY SEARCH is to be used.
6.1.7 Hashed table
If the number of entries in the Internal Table is high then use Hashed Table with Keys to access the table.
6.1.8 Transporting
With READ or MODIFY Statements use TRANSPORTING
6.1.9 Using LDB
In order to improve performance in case of an LDB, individual tables can be excluded from selection. Under the section Table Selection in the Documentation of LDB the fields with proper description has been given those fields can be set in the application report at the time of INITIALIZATION or at the START OF SELECTION. This can enhance the performance.
6.1.10 Append Lines of
Whenever it is possible use APPEND LINES OF to append the internal Tables instead of using loop and then APPEND Statement.
6.1.11 Use WHILE
Use WHILE instead of a DO+EXIT-construction, as WHILE is easier to understand and faster to execute
6.1.12 DELETE <itab> WHERE
Use DELETE <itab> WHERE for deleting records from an internal table.
e.g.
Instead of
LOOP AT <itab> WHERE <field> = 0001
DELETE <itab>.
ENDLOOP.
Use
DELETE <itab> WHERE <field> = 0001.
6.1.13 Using WHERE clause in LOOP .ENDLOOP
Use:
Sort ITAB by NAME.
Loop at itab where name EQ SY-UNAME
Endloop.
Instead Of:
Read itab with key name = SY-UNAME.
L_tabix = sy-tabix.
Loop at itab from l_tabix.
If name eq bijoy
Endif.
Endloop.
Maybe you are looking for
-
Mail "unexpectedly quits" every time I try to open it
Any help would be greatly appreciated! My roommate pulled out the Ethernet cord yesterday to do some networking stuff on her laptop, and since then, Mail hasn't worked. I've: restarted ran Disk Utility and now I'm not sure what else to do. She sugges
-
Shape tool compatibility CS6 and lower
Hi there! I'm attaching a document, created in CS6 that is giving me grief when trying to open and use in lower versions. (have created documents for a group of people with various versions) Have created two rectangle shapes,(white stroke, no fill,
-
ITunes doesn't work with MAC OS X 10.7
Since I installed MAC OS X 10.7 I can't open iTunes. I already downloaded the final update. This is what it says: Process: iTunes [1537] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version
-
Weird - can connect to both instances - but not to main SID
As a newbie to RAC I got stuck... after installation of grid, db SW and a sample DB "QRC" with dbca I can connect to both instances QRC1 and QRC2, but not to QRC - here sqlplus tells me "connected to an idle instance" What did I mix up?? rac11a ~ RDB
-
Hi guys Basically, I would like to create a panel for Photoshop CS4 getting an RSS feed of my video tuts. I know how to put the video window but I would like the RSS links to show the video once clicked. Kind of like what Scott Kelby did HERE but ins