Understanding extractor for 0costcenter

Hi
m tryin to learn how to find which extractor is used for 0costcenter in r3
in bw side i have narrowed it down which datasource is used and what fields are coming in for it
what i did
i wen to source systems in Modelling, selected R3 source system
and find the Datasource for 0costcenter
here i get the idea which field are coming to BW from R3, which bw infoobject it is assigned to?
now i loginto r3
i want to understand which extractor is used for this datasource
what fields are selected
what are underlying database tables
what attributes?
basically every flow?
pls help

closing it...posted it in different section

Similar Messages

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • BW Extractor for FS10N Repot

    Hello all,
    I have seen few threads on BW extractors for FS10N report.
    I would like to know which is the best BW extractor to use for FS10N report.
    Is it 0FI_GL_4 or 0FI_GL_10 or 0FI_GL_1? Could anyone please suggest.
    Thanks,
    Praveen Tati

    Thank you Murali.
    The table FAGL_ACTIVEC has no entries in ECC. I assume it is not active.
    I will use 0FI_GL_4 extractor and enhance as per the requirement.
    Could you please tell me what setting I need to do to get latest delta's when I run data load from BW?
    I understand that I need to do some settings in tables BWOM_SETTINGS, BWOM2_TIMEST.
    Thank you very much.
    Praveen
    Edited by: Praveen Tati on Jun 17, 2011 11:12 PM

  • Extractor for payroll reads data from cluster PCL2?

    Hello all,
    This is the line from help.sap in payroll extractor.
    "The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
    Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
    Thanks in advance.

    Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
    But, surely the user that you are using for extraction has no enought rights or authorizations.
    Look at these notes
    397208 **** very important!!!
    672514
    964569
    329961
    585682

  • Extractor for ISEG

    Does anyone know of a standard extractor for ISEG (Physical inventory)?
    Thanks

    Thank you for your reply.
    Based on my understanding of how those extractors work, they basically work off MSEG/MKPF and USEG ...
    So in other words those are extractors for goods movements and cost/retail revaluations.
    What I am looking for (which is contained in table ISEG) is an extractor for the actual physical count (or "cycle count" I think it's called) that is entered into ERP.
    Would this be visible in 2LIS_03_BF in some shape or form? Identified by some key like 0PROCESSKEY or similar?
    Thanks

  • Hierarchy extractor for FICO

    Hi Experts,
    I am trying to create an extractor for cost center group hierarchy (transaction code KSH3) and cost element group hierarchy (transaction code KAH3) from R/3 so that this hierarchy will be populated into BW data source. I am using transaction code RSO2 to create the generic datasource and I from what I understand, extraction can be done using DB view, SAP query or function module. And the function module is chosen because this is a hierarchy that I need to extract.
    Please advice on how do I about this.
    I have searched the internet and I have found some of examples given using function module PHIE_HIERARCHY_CATALOG and PHIE_HIERARCHY_TRANSFER. Is this function module only can be use when extracting HR related hierarchy? Because my requirements is to extract from cost center and cost element groups which falls under FICO module.
    Your reply is very much appreviated.

    Try the SAP delivered 0COSTCENTER_0101_HIER  for cost centers and 0COSTELMNT_0102_HIER           Cost element    
    pts appreciated.

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

  • Std Extractor for table EQKT

    Can someone help me in finding the sap std extractor for the table EQKT (Equipment short texts table). I need to extract the info from the field EQKTU.
    -Tagz

    Krishna,
    To the best of my knowledge there is no standard delivered extractor for table EQBS. Try and understand the functionality of the data stored in the table and its relationships to what is specified in requirement. Is the field required in the master data of equipment or some other transaction data? Depending on the scenario you may have to enhance the master data / transaction data extractor or may be if situation warrants you may have to create a generic extractor.
    General procedure employed in finding extractors is to know what type of data is requested, which functional area then check the standard extractors in that specific application component to see if any of the extractors delivered provide the data required. Check help documentation of the extractors.

  • Extractor for PM process orders

    Hi Experts,
    We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
    http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm

    Is there any clues?

  • Can I have TWO Extractors for ONE InfoObject ???

    Hi all,
        We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
    Thanks.

    Hi Venkat,
    You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
    http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
    Hope this helps...

  • Extractor for AR aging report ?

    Can anybody tell me if there is a standard extractor for this query ?
    I would also appreciate if you can tell me what we can get out of this report.
    Thanks,
    Rishi.

    Hi Rishi
    Use following for AR aging report (All business content objects)
    Data source: 0FI_AR_4
    Info cube: 0FIAR_C03
    Query :0FIAR_C03_Q0005
    Hope this helps
    Regards
    Pradip

  • How to create  a datasource for 0COSTCENTER to load data in csv file  in BI

    how to create  a datasource for 0COSTCENTER to load data in csv file  in BI 7.0 system
    can you emil me the picture of the step about how to  loaded individual values of the hierarchy using CSV file
    thank you very much
    my emil is <Removed>
    allen

    Step 1: Load Required Master Data for 0CostCenter in to BI system
    Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
    Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
    Step 4: Mapping
    Create Text Node thats the first node (Root Node)
    Insert Characteristic Nodes
    Insert the Last Node of the Hierarchy
    Then you need to create a Open hub Destination for extracting data into the .csv file...
    Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
    Thanks,
    Sandhya

  • Extractor for table S115

    Hi,
    Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
    Thanks for the information
    Mónica

    Hi
    just create a generic extractor for this table.
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Reg's
    Edan

  • Extractor for table COBRB

    Hello Experts,
    I am looking for a BC-extractor for table COBRB containingt hese fields:
    OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
    Any idea?
    We need the relation between COORDER and the valid HKONT for a certain moment.
    As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
    Thanks in advance,
    Udo

    Hi,
    Enter your table name in SE11 in ECC.
    Click Where-Used-List
    Select Structures, Programs etc., then it will show the entire info.
    Regards,
    Suman

  • Extractor for AUFK and AFKO tables

    Hello Experts,
    I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
    Thanks,
    Rishi

    For internal orders (ie aufk) have a look at 0COORDER and the transaction data  0CO_OM_OP*
    and the rest of the content for IOs
    http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm

Maybe you are looking for