Understanding ON Bounded/Unbounded XML source files...

Hi,
An ADF application can have multiple unbounded/bounded task files. But at runtime all unbounded task files become one single fat file.
Is my understanding correct?
Can any one please anwer me?
Thank you in advance..
Srinivas
Edited by: Srinivas.b on May 6, 2010 12:16 PM

Can we use more than one unbounded taskflow?: Yes, but why would you want to? General you only need one unbounded task flow to call multiple bounded task flows.
Does ADF treat all of them as one file? At design time their separate, at runtime I believe it merges them into one "entity", but it doesn't actually create a new file, it's probably a single memory construct similar to what happens in JSF for multiple faces-config.xml files. See:
http://one-size-doesnt-fit-all.blogspot.com/2007/01/using-multiple-faces-configxml-files-in.html
CM.

Similar Messages

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Multiple xml source file loading ?

Hi,
I've already managed to set some multiple flat file as source, but the question is :
How to set some multiple XML source files ? (to read ally xml files stored in a folder for instance)
I link the XML file directly in topology instead of doing it in my model. So how can I change the file name dynamically ?
Any advice ?
Thanks
Pierre-Henri

Hi,
all right I followed the explanation on this link :
Looping a folder for pattern files
The set up is ok, but I generate this error message :
The scenario did not end properly.
When I'm trying to run the interface alone (without v_FileName obviously), I get this error :
java.sql.SQLException: Table not found: D in statement ...
I created my XML model, then I defined it's ressource model as D:\mypath\001.xml. Into the interface, as my model uses XML technology, I can only use LKM SQL to SQL knowledge model.
When I look at operator, I can see it tries to run this following SQL code :
select
attribute 1,
attribute 2,
from     schema.D:mypath001.xml CD
where     (1=1)
schema.D:mypath001.xml is probably the wrong part :)
Do you have an idea to get your example (on txt files) running with some xml files ?
thanks for your time

The XML Source file is unavailable for viewing

Same java application is deployed on two different servers. One server is in the intranet zone and the second one is in the internet zone. The request sent to the server is an xml file and the response from the server is also an xml.
In intranet server, when we are trying to view the source of the response xml file , we are getting a prompt displaying the message "The XML Source file is unavailable for viewing".
But in internet server, when we are try the same, we are getting a valid xml resposne. We are using IE 6.0 - SP1 browser.
We tried the same in the mozilla browser and found the same results. Any suggestions on this?

One possibility is the IE security settings under tools/internet options. The intranet site may have a lower security setting than the internet site. The browser may not ne letting the internet site download the xml.

How to handle blank root element in xml source file

Hi There,
I have a dataflow which using xml source file. The job keep failing and I guess it might be caused by one of the root element which is blank. Can anyone advise me how to handle it?
The xml file look like this:
-<orderinfo>
--<orderdetail>
---<orderid>1</orderid>
---<orderdate>20110101</orderdate>
--</orderdetail>
--<abc />
-</orderinfo>
element <abc> is blank
Thanks and Regards,
BL

Hi Suneer,
The issue is DS cannot validate the source file at all. It returns error message when I try to preview the source file in the dataflow. Is there any work around I can implement other than request the source team to change the file layout?
Thanks,
BL

XML source file path (LINUX vs. WINDOWS)

Hello, we are sourcing data from XML for a project. RPD development is being done in Windows and then the RPD is getting deployed to the Linux env.
How can i make sure the path translate from Windows to Linux?
Windows path can be C:\myobieedata\region.xml
How can this be translated into Linux path?
Your help is appreciated.
Regards,

Just edit the connection pool to use the valid location of the files in Linux and copy that RPD over to the linux box. You can even edit it 'on-line' on the Linux environment and make the change there.
As an example I'd check the sample sales connection pool that was configured when you installed OBIEE on Linux and observe the difference to the sample sales connection pool when you installed on windows.

Merge xml source files; 1:n relationship

Hi!
All samples I have checked are based on 1:1 relationship
between master and detail data set.
For example:
Exactly one xml file will be loaded depending on which
element of the master xml file is selected.
http://labs.adobe.com/technologies/spry/samples/data_region/DataSetMasterDetailSample.html
But what about 1:n relationships? What if the master xml
returns more than one depending xml file?
Two scenarios are imaginable:
1. Collect all detail xml data by looping through all data
rows and create a dataset on the fly with all relevant data.
(Please note my last posting "Observer event fires two times") That
could be a new merge function ;-)
2. Implementation of a new XMLDataSet constructor that allows
an array with one or more path to detail xml file(s).
What do you think about it? Or is there another way to handle
1:n relationships?
Regards
libelle2000

Hi !
On Srpy 1.4 version the 1:n relation is not supported, but we
have two new solutions for this already posted on preview section.
http://labs.adobe.com/technologies/spry/preview/samples/data_region/NestedXMLDataSample.ht ml
Instead of creating one master xml file that points to other
details xml files, you can have a single xml and create there the
1:n relation there. In this way your request is solved using a
single xml file.
Please follow the link I gave you above and see the examples
from there.
Diana

Data Flow | XML Source | Very Slow with big files (over 1/2 a gig)

hi
I am trying to load a few XML files to a database. one of our proprietary systems load the file in 3-4 minutes however with ssis XML source file it takes over an hour.
can anyone know the reason/help with this?
I tried the delayValidation set to true with no success.
thanks
eddy
eddy.a

Parsing XML files as data sources in SSIS is not the most efficient. Remember that you have define a WSDL (aka structure of the input file) and once the XML source starts parsing the input file, it has to read every node at every level and make sure it conforms
to the structure defined in the WSDL file before it can start streaming the data out to the downstream components in your workflow.
A half-gig XML file with 150 nodes to parse is going to need some heavy-lifting behind the scenes before you start seeing the rows streamed out. I'd rather recommend that you use either inbuilt .Net classes for XML to parse and extract the data or leverage
SQL scripting to accomplish that. Alternatively, if your upstream system can instead drop the data feed in a flat file format, that'd be more preferable. And if you could hook into their data streaming APIs/end-points directly, that'll work too.
Hope this gets you started in finding the right approach.
- Muqadder.

Reading the data from XML Source

Hi
i want to read the data from XML source file, and update the transaction information to another XML file. how we can do this in ADF, please help
Thanks
nidhi

you may use normal Java API to do that
http://www.javablogging.com/read-and-write-xml/

Differences between various source files in mdm import manager

Hi,
Can anyone tell me the differences between the source files(access,xml,xml schema,excel) available in mdm import manager?
Thanks and regards,
Rithesh
Edited by: rithesh_shet on Mar 30, 2010 1:04 PM

Hi Ritesh,
MDM Import Manager provides flexibility to Import Data from different types of Sources into MDM.
You can import data into MDM from below mentioned sources using Import Manager:
1. From Files (Access, Delimited Text, Excel, Fixed Text, XML and XML Schema)
2. Directly from Data base source (SQL server and oracle)
As mentioned by Mandeep, XML Schema is something which you define in MDM console in advance. and then later select the Data source XML file and XML schema from drop down list (it will show all schema defined in console ) to validate XML source file against the XML schema.
For automated Import, Ports are used. Ports are nothing but a logical point of contact with other systems i.e. other systems or middleware will drop file on the port for authomatic import and MDM import server will scan the port directory and if file is present then will import data automatically from file into MDM using a predefine Import Map. (this map needs to be defined manually in import manager and then assigned to port using console).
Please check page no 45 of import manager reference guide for more details about various source properties of Import Manager. (*link for import manager reference guide is already provided on the earlier post)
Also check, page no 53 to 64 for how to import process. Kindly revert if you have any query.
Regards,
Shiv

Dynamic XML Source to a Fixed Target Table

Hi gurus,
Please help me on this one, I've been trying to work it around for 2 weeks now, and unfortunately, I can't think of any solutions anymore.
So here is the case:
I'm using ODI 11g and I'm loading XML files to Oracle Tables.
But in this case I have a dynamic XML file (number of columns varies, depends on the user input) as the source and I have to load it into a fixed Target Table.
Example:
XML SOURCE FILE (dynamic number of columns):
Column_A1 | Column_B1 | Column_C1 | Column_A2 | Column_B2 | Column_C3 | Column_A3 | Column_B3 | Column_C3 | | **
**means I don't have idea how many columns in one XML would be. It can be 6 columns, 9 columns, 3 columns. I do reverse engineer to get the latest XML structure.*
FIXED TARGET OUTPUT TABLE (3 columns only):
Column_A1 | Column_B1 | Column_C1
Column_A2 | Column_B2 | Column_C2
Column_A3 | Column_B3 | Column_C3
** | * | **
--END OF EXAMPLE*
So what I want to happen is that, everytime ODI detects that it is already the 4th column, 4th - 6th columns would append to the next row and 7th-9th would append to the next row, and goes on and goes on.
What do you think is the best way to do this? Or if there is any way?
Please please help me, it would be of great great help to the project I'm working.
If there's no way, I'm thinking of creating a PL/SQL within a KM for this one.
Thank you gurus'!
Regards,
-Vince
Edited by: Vindi on Aug 22, 2012 2:45 AM
Edited by: Vindi on Aug 23, 2012 6:57 PM

What is the minimum number of columns from source side..if the minimum number of column will be 3 then my logic may work.
Please confirm.
Because in case of odi reverse, odi will add the extra column to the datastore. If initially the souurce file has 3 columns then the target datastore will 3. In next reverse if the source file has 5 column then in the next reverse it will add 2 more column to the datastore. Again nexttime if the source file has 2 column ODI is not going remove/drop these 3 extra column.

Generated XML doc file contains comments from MFC source code

Hello, in my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes, see the part of generated xml file:
Is there a solution to ignore these MFC cpp files?
Many thanks
Regards
Petr Stejskal
<?xml version="1.0"?>
<style xmlns="http://www.w3.org/1999/xhtml">@namespace html url(http://www.w3.org/1999/xhtml); :root { font:small Verdana; font-weight: bold; padding: 2em; padding- } * { display: block; padding- } html|style { display: none; } html|span, html|a
{ display: inline; padding: 0; font-weight: normal; text-decoration: none; } html|span.block { display: block; } *[html|hidden], span.block[html|hidden] { display: none; } .expand { display: block; } .expand:before { content: '+'; color: red; } .collapse
{ display: block; } .collapse:before { content: '-'; color: red; } </style><doc><assembly><assembly>
"Console" </assembly></assembly><members><members><member name="T:_RS"><member
name="T:_RS">Reed-Solomon codec control block</member></member><member name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)"><member
name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)">Mode indicator. See Table 2 in Appendix 1 of JIS X0510:2004, pp.107.</member></member><member
name="M:CMFCControlRenderer.IsScaled"><member
name="M:CMFCControlRenderer.IsScaled"><summary><summary>Tells whether this control
renderer works with scaled (resized) images.</summary></summary><returns><returns>Returns TRUE if this control
renderer works with resized (scaled) images.</returns></returns></member></member><member name="M:CMFCControlRenderer.SmoothResize(System.Double)"><member
name="M:CMFCControlRenderer.SmoothResize(System.Double)"><summary><summary>
Smoothly resizes images.</summary></summary><param name="dblScale" /><param
name="dblScale"> Scale ratio.</param><returns><returns>
TRUE if resize succeeds; otherwise FALSE.</returns></returns></member></member><member name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><member
name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><summary><summary>
Creates a 32 bit bitmap from the specified bitmap.</summary></summary><returns><returns> A handle to created
bitmap, or NULL, if creation fails.</returns></returns><param name="bitmap" /><param
name="bitmap"> A handle to the original bitmap.</param><param name="clrTransparent"
/><param
name="clrTransparent"> An RGB value specifying transparent color of the original bitmap.</param></member></member><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><summary><summary>
Creates an empty 32 bit bitmap.</summary></summary><returns><returns> A handle to created bitmap, or NULL,
if creation fails.</returns></returns><param name="size" /><param
name="size">Specifies bitmap size.</param><param name="pBits" /><param
name="pBits">When the function returns contains a pointer to bitmap bits.</param></member></member><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><summary><summary>Rotates
a source DC content inside the given rectangle by +/- 90 degrees</summary></summary><param name="rectDest" /><param
name="rectDest">Destination rectangle</param><param name="dcSrc" /><param
name="dcSrc">The source device content.</param><param name="bClockWise"
/><param
name="bClockWise">TRUE - rotate +90 degrees, FALSE - 90.</param></member></member><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><summary><summary>Deletes
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of the key to be deleted.</param><param name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><summary><summary>Opens
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of a key that this function opens or creates.</param><param name="ulOptions"
/><param
name="ulOptions">This parameter is reserved and must be zero.</param><param name="samDesired" /><param
name="samDesired">A mask that specifies the desired access rights to the key.</param><param
name="phkResult" /><param
name="phkResult">A pointer to a variable that receives a handle to the openedkey.</param><param
name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member></members>

Hi stejsky,
Thank you for posting in MSDN forum.
>>In my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes.
Based on your issue, could you please tell me how you use the option /doc to generate XML doc file from your source codes?
If you use the option /doc to generate the XML doc file by right-click the your MFC project->Properties->Configuration Properties->C/C++->Output file->set the Generate XML document files as Yes(/doc) like the following screen shot.
(1)If yes, since we could not reproduce your issue in mu side, so if possible, I suggest you could share me your MFC project so that we will further help you support this issue.
You could upload your MFC project to the OneDrive and then copy link here.
(2)If no, please try the above way to generate XML doc file and then check if you still get same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

XML Source - how to stream a 50GB XML file to a database?

Hi guys!
I have been trying to load a 50GB XML file (well, just a 1 "row" at first) in to SQL server via OleDB connection. It seems that this component does not stream the data, but tried to load it into memory - I have only 8GB, so that might be an issue.
Very few people will have 50GB mem on their development machines, so how do I get around this limit? Is there a streaming version of the XML source????
I did make a test with a 500MB subset version of the same file, and it worked just fine. All became green - with 50GB I do not even get to the "yellow stage". :-(
Thanks

Hi guys!
Some interesting news.
I managed to get the Wikipedia load example running, after updating the XSD file to version 0.8. With the version 0.3 in the example the job runs for about 1 hour, finishing with 0 row loaded (!). Now the example runs and appears to be streaming(!). This
question is why I can not get this same behaviour for my other big XML file - the current Wikipedia file is 46GB, so very close to my other 49,5GB file.
File differences:
Wikipedia:
Outputs: 35 (using 2 for testing)
File size: 45,9GB
XSD provided by mediawiki.org
Other XML:
Outputs: 92(!) (only using 1 for testing)
File size: 49,5GB
XSD generated by SQL Data tool/XML Source - also tried XSD generated by the Trang tool.
The Wiki examples runs and streams the data, my other case appears to try to load all into memory.
The sample size version of my other XML - of 512MB streams just fine.
Both projects have the same default buffer and row settings for the Data Flow Task.
I really do not understand why the wiki file can stream, but the other can not - both are way too big for loading all into memory :-(
Right now I can only think of the numerous outputs combined with file size as the culpit, as the sample with same outputs worked just fine...
It just gets "stuck" in the "Prepare for Execute phase is beginning." part... here DTSdebugger.exe process eats up 6,5GB of my machines 8GB...

XML to Java source files

Hi,
I need to create classes and interfaces for certain elements in my node.xml ( along with a node.dtd).
In my node.xml I have the following element:
<exception name="XXNotLockedException">
<description>The xxxx to be tested was not in administrative state LOCKED.</description>
<exceptionParameter name="message">
<dataType>
<string/>
</dataType>
</exceptionParameter>
</exception>
from this I want to generate a java source file like below.
Is it a possible and good way to do it? Or is it the old SAX with events that shall be used?
I have managed to generate java files but they are only the default ones.
All help appreciated from more experienced programmers.
//Mikael
Source file
package se.company.xxx.bcm.iface;
public class XXNotLockedException
extends se.company.xxframework.XXAccessException
* Constructor
public XXNotLockedException()
super("XXNotLocked");

I would say using XSLT would be easier to understand than a SAX events program. And more flexible, too, if your requirements changed.

"Source File does not match XML Schema"

Using MDM 5.5 SP4 Patch 2 (Build 5.5.34.26) on a 32-bit system (WinServer 2003, Enterprise Edition SP1.
This source file and schema have been verified by SAP Tech Support and again using Altova XML Spy. The schema was loaded into MDM through the console and the source file was successfully mapped against it and the data manually imported into MDM. The customer record was then cleansed using the Data Manager and the import map was used to create an inbound port. However, when the Import Server goes to import the file using the map, the following error is dropped into the log: "Source File does not match XML Schema". Has anyone else seen this error?
Thanks, Don
IMPORT LOG ENTRY:
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
<MDM_Log version="1.0" path="H:PROGRA~1SAPMDM~1.5IMPORT~1TempMDIS_TASK@@U@[email protected]"
>
     <Open ts-long="18:24:35 GMT, Saturday, February 03, 2007" ts="2007/02/03 18:24:35.108 GMT" pid="8640" host="bp1tulap452" compile-type="RELEASE_32">
          <Trace ts="2007/02/03 18:24:35.249 GMT" tid="7216" entry-no="3">[BP US FUELS CUSTOMER MASTER] Import Task Started. Chunk size[50000], No. parallel chunks[1]</Trace>
          <Trace ts="2007/02/03 18:24:43.890 GMT" tid="5980" entry-no="11">xSaxParser: Starting.</Trace>
          <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="19">xSaxParser: Ending.</Trace>
          <Trace ts="2007/02/03 18:24:43.937 GMT" tid="5980" entry-no="20">Source file does not conform to XML Schema!<LINE-FEED/></Trace>
          <Trace ts="2007/02/03 18:24:45.312 GMT" tid="7216" entry-no="29">[RESPOSITORY]Import Task Finished. Chunk size[50000], No. parallel chunks[1]</Trace>
     </Open>
</MDM_Log>
SOURCE FILE:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:CustomerCreateResp xmlns:ns1="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100">
- <CUSTOMER>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<MDMCUSTOMER>2463</MDMCUSTOMER>
<CREATE_DATE>22/01/2007,11:43:49</CREATE_DATE>
- <RETURN>
<TYPE />
<MESSAGE />
</RETURN>
- <PT_CONTPART_RETURN>
- <item>
<MDM_CONTACT>0000000001</MDM_CONTACT>
<CONTACT>0001111119</CONTACT>
</item>
- <item>
<MDM_CONTACT>0000000004</MDM_CONTACT>
<CONTACT>0002222229</CONTACT>
</item>
</PT_CONTPART_RETURN>
- <PARTNERS>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<PARTNER_FUNCTION>RE</PARTNER_FUNCTION>
<PARTNER_NUMBER>0001333329</PARTNER_NUMBER>
<DEFAULT_PARTNER>X</DEFAULT_PARTNER>
</item>
- <item>
<CUSTOMERNO>0090154474</CUSTOMERNO>
<PARTNER_FUNCTION>WE</PARTNER_FUNCTION>
<PARTNER_NUMBER>0001555559</PARTNER_NUMBER>
<DEFAULT_PARTNER />
</item>
</PARTNERS>
</item>
</CUSTOMER>
</ns1:CustomerCreateResp>
SCHEMA:
   <?xml version="1.0" encoding="UTF-8" ?>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" targetNamespace="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100" elementFormDefault="unqualified">
<xsd:element name="CustomerCreateResp" type="CustomerCreateResp" />
- <xsd:complexType name="CustomerCreateResp">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">682cc2d0aa6e11db9b800015c5888624</xsd:appinfo>
</xsd:annotation>
- <xsd:sequence>
- <xsd:element name="CUSTOMER">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f68988f0a02e11db94bb00166f98336c</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b20a75811dba9d400166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b21a75811db9c4800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="MDMCUSTOMER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b22a75811dbcbac00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="CREATE_DATE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b23a75811dbcc0300166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="RETURN" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b24a75811db8d5500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="TYPE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b25a75811db876d00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="MESSAGE" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b26a75811db85c400166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="PT_CONTPART_RETURN" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b27a75811db8ca900166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b28a75811dbaae100166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="MDM_CONTACT" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b29a75811dbaade00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="CONTACT" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2aa75811dbc24c00166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="PARTNERS" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ba75811dbb74500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="item" minOccurs="0" maxOccurs="unbounded">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ca75811db9f6500166f983d94</xsd:appinfo>
</xsd:annotation>
- <xsd:complexType>
- <xsd:sequence>
- <xsd:element name="CUSTOMERNO" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2da75811db9bd800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="PARTNER_FUNCTION" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2ea75811dbb84100166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="PARTNER_NUMBER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b2fa75811db852800166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
- <xsd:element name="DEFAULT_PARTNER" type="xsd:string" minOccurs="0">
- <xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">72ea9b30a75811db968400166f983d94</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

You have to define the namespace in the URI field of XML Schmea in Console.
In MDM Console,
Admin -> XML Schemas -> Create XML Schema
You have to specify the namespace urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100 in the URI property.
Please update this post if fixed your problem.

Understanding ON Bounded/Unbounded XML source files...

Similar Messages

Maybe you are looking for