Understanding the spec for wsdl 2.0

Hello,
I searched the w3.org for the spec for wsdl 2.0 and I found these:
-primer
-core
-adjunct
Can anyone tell me how they relate to each other and which are most important??
Thanks in advance,
Julien.

If you follow the instructions you end up on http://support.oracle.com
There Note 1223673.1 explains the download locations for 11.2.0.2
In this Note another link is shown: https://updates.oracle.com/download/10098816.html
Following this link the well-known README button is displayed, directing you to some other location on the same site you referred to:
https://updates.oracle.com/Orion/PatchDetails/view_readme?plat_lang=212P&patch_file=&file_id=&password_required=&password_required_readme=&merged_trans=&aru=13149353&patch_num=10098816&patch_num_id=1294815&default_release=80112020&default_plat_lang=212P
HTH
FJFranken
My Blog: http://managingoracle.blogspot.com

Similar Messages

What are the specs for iPod video

i wish to manually convert .mov (video with audio) to vPod format.
anyone know where there is a list of the specs required, movie size, format, audio format?
i'm trying to figure out the following:
i have two movies of like nature. i drop ,them both in iTunes. i tell iTunes to convert for iPod and it says one does not need conversion. i am trying to figure out why the other does. they are both 44.1/h.264.
what is the movie size spec and all the specs for QT to vPod conversion? (i want do to it manually.)
i think i have it, is this correct: 320x180 (16:9). i assume vPod can play both 48.hz audio and that that does not have to be converted to 44.1 (both aac)?

QT Kirk is simply saying
you can make the file you dropped on the script in
order to make it uneditable editable once again by
loading the file in a hexidecimal editor utility and
"zeroing out" the code that makes it uneditable.
yes, i wanted to know which file to edit the script or the 'locked' movie --the .mov, thanks.
.mov
Format: AAC,Stereo (L R), 44.100kHz, H.264 Decoder,
391 x 216, Millions
FPS: 29.97
Data Size: 58.25
Data Rate: 536.90 kbits/sec
Normal Size: 391 x 216 pixels
Current Size: 391 x 216 pixels
(Actual)
The information cited does not include information regarding
the H.264 profile used to create it. If created using the QT
"Movie to QuickTime Movie > H.264" export option,
then the file would not be iPod compatible since this
workflow employs the "Main" profile. In a similar
manner, if the file was created using the QT "Movie
to MPEG-4" Export option, it would have been created
using either the "Main" or "Baseline" profile.
However, based on your dimensions, iTunes expects the
file to be created using the "Baseline Low Compexity"
profile and proceeds to correct the situation.
how can you do that via QTP expert options? if you can. i create a lot of web movies and wish to 'feed 2 birds with one piece of bread'. (i like birds.
if these are the only
conversion for iPod tools apple offers...
why?
QT Pro/iTunes currently
offers the use of two H.264 iPod compatible,
automatically adaptive workflows (Baseline LC and
Baseline) and QT Pro additionally offers one full
manual iPod compatible H.264 workflow (Baseline
profile) and one full manual MPEG-4 workflow. As to
why the QT "Movie to iPod" and iTunes workflows are
auto-adaptive, most users simply want to have iPod
compatible files when they want them and don't want
to learn how to make them properly with respect to
each compression format and/or profile requirement
and/or special case considerations (dimensions, data
rates, frame rates, key frame frequency, aspect
ratio, macroblock efficiency considerations, etc).
yes, i wish to... well, i said that above, create web and ipod in 'one fell swoop'. i suppose these ipod auto-adaptive modes will work for web, but i'd rather use the expert options. i would like to "learn how to make them properly".
> ok .m4v is h.264.
Rather loosely stated. The
".m4v" extension refers to the file container while
H.264 refers to the actual video compression
algorithm. In this case the H.264 video format is
specifically stored in this file container. One the
other hand, the ".mp4" file container is a more
generic MPEG-4 file container commonly used for
either MPEG-4 or H.264 (MPEG-4 AVC) video compressed
files. And, at the other end of the scale, the ".mov"
file container is the most generic since it can
basically contain any "supported" compression format
to include either MPEG-4/AAC or H.264/AAC iPod
compatible files. One key to remember here is that
file containers, like the compression formats that
they can contain, have specific "characteristics."
For instance, ".m4v" and ".mp4" file containers can
have one external piece of graphic "artwork"
associated with it (as seen in iTunes), but the
".mov" container cannot.
i did not know that .mp4 also served for h.264. the graphic container of .m4v i had sort of noticed, however i did not or had not for .mov, thanks.
Your file did not conform to
the required "Baseline LC" profile and so iTunes
converted it. Since the "LC" profile defaults to a
video data rate on the order of 1500 Kbps, your file
size was nearly doubled for the specific duration of
your clip.
i'm not sure i understand why my data rate was converted where a lesser data rate was not. (536 vs. 262)
thanks very much for this 'training'.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

System requirements | After Effects

HT3215 Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger.

Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.

Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

There is payment related issue, I have send you a personal message, please respond as requested.
I shall raise a request to the digital river store from where it was purchased.
I am from the Customer care Team.
Regards
Rajshree

I just got an old apple mac mini a1103. i found out it comes without a power adapter. What are the specs for the power adapter

can some one tell me the specs for the power adapter. Is there a manual available somewher on apple site for this computer?

Hi lllaass,
Thanks for your great answer.
That website link is for a1105. Is it same as a1103?
Also would you know if the power connection port is simlar to the one for appletv? I have an apple tv from 2007 which no longer works. Perhaps I can use that to power the mini.
Thanks again!
Avatariq

HT201364 Hi, I have all the specs for installing Mavericks but it wont do it. Would upgrading first to Mountain Lion help?

Hi, I have all the specs for installing Mavericks but it wont do it. Would upgrading first to Mountain Lion help?

Are you sure?
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
A. Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

What's the usage for WSDL of sender agreement?

Hi gurus,
Our scenarios are using soap sender adpater, and we find in PI 7.11 there is a functionality to display the wsdl of sender agreement.
It seems xmlspy can create soap request based on the url format of wsdl, but we can't send the soap request to PI as it gave the error message as below " Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=null;TS=;AN=null;ANS=null;".
Do we have to use the "TOOLS->display wsdl" menu to get the wsdl file to local and then provide it to 3rd party system? If so, we have to export wsdl again whenever data structure changes.
Thanks in advance.

HI,
Do we have to use the "TOOLS->display wsdl" menu to get the wsdl file to local and then provide it to 3rd party system? If so, we have to export wsdl again whenever data structure changes.
---->yes ,we have to export wsdl again whenever data structure changes.
and
we have 2 approaches for generating WSDL FILE
1. in sender Agreement
2. from memu bar-> tools
but we have to generate WSDL file Through Menu bar "TOOLS" because there is chance to provide url and sender details after change the Structure..,..
thanks,

Please update the specs for the MacBook Pro - 8GB RAM Max

Hello,
Someone needs to upgrade the specifications for the MacBook Pro now that 4GB laptop SoDIMMs are shipping and compatible with the MacBook Pro.
See my blogpost on the subject at http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx.
Thanks,
Keith Combs
Microsoft

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Please send sample document for understanding the requirement for reports

Hi
Can some body send sample document for the understanding the requiremets of reports in BI
I nee to prepare sample document for understanding the requirement.
please help on this.
Regards,
Anand Reddy

hai experts,
please share the code how to enable the selections at the rsa3 level ,if the generic extractor is based on function module.
thanks in advance

Help required to understand the concepts for data files in tablespace

Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
Thanks

782790 wrote:
Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
ThanksIf the datafiles are full, there is not much that you would get from the "defragmentation" of the datafiles. It would be sort of like this in the start,
FFFFFFFFFFFFFFFFFFFFFFFFFF
Then it will be ,
FFFFFFFUUUUUFFFFFUUUUUU
So what you are going to get is something like this, (if would be done),
FFFFFFFFFFFFFUUUUUUUUUU
So that's how the datafile would like. But that won't give you much of the space anyways still. The option to add a storage must be there with you. The file being offline wont take away the space that it has already allocated. And moreover, doing so, would also impact the access to the data that it would be storing within it.
HTH
Aman....

Where is the spec for class version 49.0?

any URL? thanks.

Thanks. I noticed you found it under the Mac tab. . Odd - When you go to the Store and select Airport Extreme Base Station under Mac Accessories, the Extreme Base Station page doesn't have a link to the Tech Specs. When you're on the Mac tab and select the base station, it brings up a more complete page.
When I searched for the spec under Support, the newest spec I found was the March 2009 base station.
Thanks again.

Where is the spec for the latest Extreme Base Station?

I couldn't fin a complete spec for the latest Airport Extreme Base Station. Where is it? What size (L,W,H) is the latest base station?

Thanks. I noticed you found it under the Mac tab. . Odd - When you go to the Store and select Airport Extreme Base Station under Mac Accessories, the Extreme Base Station page doesn't have a link to the Tech Specs. When you're on the Mac tab and select the base station, it brings up a more complete page.
When I searched for the spec under Support, the newest spec I found was the March 2009 base station.
Thanks again.

Trying to understand the views for monitoring streams

Hi,
All of the columns with a measurement of elapsed_time in the following views have NUMBER as the datatype. Can someone help with me with what the actual measurement is for these field as it's definatley no seconds or milliseconds:
v$streams_capture;
v$streams_apply_reader;
v$streams_apply_coordinator;
v$streams_apply_server;
dba_queue_schedules;
When looking at V$streams_capture, column elapsed_lcr_time it is slowly incrementing when I have only replicated one insert. Why is this?
Many thanks in advance,
Warren

The views are documented in the Oracle9i release 2 REFERENCE manual. Here is the URL: http://st-doc.us.oracle.com/9.0/9202/server.920/a96536/ch3213.htm
As an example, here is the definition for ELAPSED_LCR_TIME from the manual:
ELAPSED_LCR_TIME NUMBER
Elapsed time (in hundreths of a second) creating logical change records (LCRs) since the capture process was last started

Urgent! Anyone know the specs for creative slimline dvd player

Anyone know where to get the specification for creative slimline dvd player? I cant find the information at the creative website.
Message Edited by keetech on 03-08-2005 04:24 PM

keetech,
Glad to hear that you enjoy the Fest.
Jason

Understanding the spec for wsdl 2.0

Similar Messages

Maybe you are looking for