Undesirable and random GET_CONFIG pages printing from HP Color LaserJet CM2320fxi

An HP Color LaserJet CM2320fxi MFP is printing at what seems as random times two pages. The first page is a GET_CONFIG page and the second page is a two line page of random giberish characters much like the Windings font.
Error logs on the printer don't reveal anything is wrong. It apears that the printer is not aware of these printing events or is not recording them in the logs.
Something similar to this has been encountered and was a result of bad memory or a corrupted firmware load.
This sort of behavior was found posted online in a very brief message on HP's site. Different model of course. http://h30499.www3.hp.com/t5/Printers-LaserJet/get-config-pages-on-models-CP2025/td-p/1095046 The problem apeared not to be resolved.
I dislike the event log of these printers. It doesn't define datetime stamp of the events.
Copied event log:
Number Code Page
8 54.2500 2606
7 54.2500 2598
6 13.0000 2324
5 13.0000 2264
4 13.0000 1503
3 13.0000 888
2 13.0000 812
1 54.2100 0
The number of events with these symptoms seem pretty sparse. At least those that are reported. http://h30434.www3.hp.com/t5/Other-printing-questions/CM2320fxi-Locks-up-when-printing-from-Ubuntu-9...
Also, the error 54.xxxx doesn't appear to be documented which makes identifying the problem rather difficult.
The "Get_Config" occurrences were taking place shortly after the scheduled calibration process occurred. This was discovered by chance when i just happened to walk by and heard the printer spin up and watched it give birth to the get_config pages. Almost like it was trying to communicate with me.. Perhapse I need to "get_config". LOL
As a last resort I reset the NVRAM. The reset of the NVRAM didn't resolve the problem. There is not enough information available from HP to find a resolution to this problem. This is an attempt to open up a support request with HP or knowledeable HP guru types via this forum.
Suggestions other than that of watching and reenacting Office Space are welcome.

Phillip -- that did seem to work. Thanks!
One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
Randy

Similar Messages

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

How to have only single pages printed from iphoto book

I would like to know if it is possible to have pages printed from an iphoto book that is not bound. I just want the loose pages to create an ongoing scrapbook not an already bound book. Is this possible?

If you print yourself one way to do it is to start to print the whole book by typing Command+P. Then in the print window select either All, Single or Range and then put in the page numbers you want to print. Then click on the PDF button and select Save PDF to iPhoto from the drop down menu.
Screenshot from iPhoto 11 in Lion - Click to view full size
This will create a 200 dpi jpg file for the page and import it into iPhoto. From there you can print it yourself or have a local photofinisher print it on whatever stock you'd like.
OT

HP M401dne Two Page Printing from Tray 1

When attempting to print a two sided document from Tray 1, the first page prints from that tray, after turning the document over to print the back page, the printer takes the paper from Tray 2.

>> ... attempting to print a two sided document from Tray 1, the first page prints from that tray, after turning the document over to print the back page, the printer takes the paper from Tray 2 ...
I'm not sure that I understand your reference to "turning the document over to print the back page".
This seems to imply that you are using what is commonly referred to as "manual duplex", where you print all of the even pages, then (manually) take the printed outpuit and place it back in the tray, then print the odd pages on the other side.
[I'm not sure if it's odd first, then even, or vice-versa - may depend on printer model and driver].
But your printer model (LaserJet M401dne) should have a built-in automatic duplexer unit, where duplex action occures automatically, without manual intervention.
Perhaps your printer driver is unaware that the device has a duplex unit?
Ensure that the driver knows that a duplex unit is present on the printer (assuming that one is):
For the printer instance in question, bring up the Printer properties dialogue.
Select the Device settings tab.
Ensure that the duplex unit is set to Installed rather than Not installed.
You'll probably need to be logged in with administrator credentials in order to change the device settings.
... or are you saying that the first page prints from one tray, whilst succeeding pages (no matter how many) print from a different tray?

I used to be able to print from my iPad until I downloaded the upgrade my daughter did not and she could still print from her iPad

I used to be able to print from my iPad until I downloaded the upgrade my daughter did not and she could still print from her iPad

try updating printer firmware

What is the least expensive and simplest way to print from the iPad 2?

What is the least expensive and simplest way to print from the iPad 2?

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Can't print with HP Color LaserJet dn2605

I haven't been able to print my HP Color LaserJet from Early 2008 Mac Pro using 10.9.4. I have attempted to print on the network and USB to no avail. I have deleted the printer, reset all printers and scanners. Once I delete or reset the printers, I always have to recycle/rebounce the printer so it can be found. Once found and I select it by the "Use" drop down, there are two(2) HP Color LaserJet 2605 profiles. I can select either one and sets-up the printer. Once I attempt to use the printer, the print job goes to the queue and few minutes later the printer starts initiating and sounds like that a paper is getting ready to move and it stops or quits. I then receive the yellow light a problem occurs, thats all the farther it goes. I have the latest printer driver update 19.9.. I also have reloaded the OS 3-4 times. Here is what I receive the print queue when it fails: "Stopped - Unable to write print data: Broken pipe".

That's sounding like a printer problem, not software.
But just in case, try deleting the HP folder from /Library/Printers, then Reset the Printing System and add the printer again.
OS X Mavericks: Reset the printing system
If that doesn't work, use a browser and connect to your router, and see if you can identify the printer in "connected devices."
(a printer that changes IP address whenever there is some change on your local net will give symptoms like that)

Printing photos with Color Laserjet CM1312. Need proper printing software.

I'm trying to print photos from my Color Laserjet CM1312 multi-function printer.
I used to have a Photosmart inkjet, and tried to use the photo-printing softthat came with that printer, as I really like it. But that must have been designed just for ink-jet printers because the printouts end up way too heavy on ink density, to the point that some of the ink is actually scraped off during the printing.
What software should I be using for the color laserjet?
I don't need editing tools as I have Photoshop ... just printing tools.

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

XP pro-64bit issue printing to a color laserjet cp3800dn

Need help troubleshooting this issue:
User is unsuccessful in printing to a Color LaserJet cp3800dn directly from an IP address.
I've tried to install the 64bit version of the driver - that didn't work
The version of XP is SP3.
Fortunately the user can print to this printer as a network shared resource. But when I tried to assign printer by IP address--because user wants to configure double-sided printing--i get the message "local downlevel document" failed to print. And I would have to cancel it from the print que.
I've tried to change the printer configuration to "print directly to printer" but seem to dislike that option because it freezes after selecting that option and try to print.
I've also tried to restart the computer once after installing HP printer drives and after making modifications to printer preferences, no luck.
Anyone encountered this issue before and have suggestions?

Phillip -- that did seem to work. Thanks!
One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
Randy

HT4356 Pages printed from Notes to air printer have very large font and no margins

How can i reduce the size of the print when printing from Ipad "Notes" to an air printer. I can only find a way to increase the font but not decrease it. Also how can I adjust the margins

Same here. Best to put the notes/copy them into something like the Pages app (for a small cost) or email them from the Notes app to a proper computer with good word processing programmes.

Pages printed from email come out garbled or in code--how to fix?

When I use my printer to print from windows programs, it is fine. When I try to print from an email program, the copy is overprinted and random, as if in some sort of code.

Probably related to this outstanding Bug. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=454532
''(Please don't comment in that Bug report unless you can provide a patch to fix the problem. Vote for the Bug instead.)'' <br />
https://bugzilla.mozilla.org/page.cgi?id=etiquette.html
Based upon this comment - https://bugzilla.mozilla.org/show_bug.cgi?id=454532#c117 - it looks like a fix might be coming in Firefox 8.0.

W7 ult. HP 6500APLUS Aio says it's online and still won't print from computer

The printer says it's connected to network with num. address and full bars. Still it refuses to print anything I send from the printer. It worked excellent with no trouble installation, or during the last 9 mos. and then it decided, for no appartent reason, to just simply not work. I have installed, reinstalled, deleted and installed, deleted and reinstalled over 15 times. I have downloaded and used the diagnostic tools and dr. even more times, yet everytime I press the network button and go through the routine, it says "Connected to wi-fi" BUT when I send a doc to be printed, nothing shows in the what's printing dialogue and nothing gets printed.
The pc is directly connected to the router; nothing's changed. My MAC "sees" the printer and prints so I have to go all through the steps on it to get to the page I want printed . This is awful. What happened to HP? You used to be the best in the business and the last 3 lousy printers I've had to junk because they refuse to print. Help me, please.
Fernando Gomez

Hello doenCS,
Welcome to the HP Support Forums! I see you have your HP Officejet 6500A Plus connected to your wireless network, however when you attempt to print nothing happens, you do not see it go into the print queue and it never prints. I see you have done alot of troubleshooting already, I would like you to continue below I know you have done many uninstalls please try this approach :
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and run the HP Printer Install Wizard for Windows it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

"Text on a path" and "paths" rasterised when printed from a PDF on an iGen

I have just obtained from the printer the first proof of my book (printed on an iGen) and I'd like to find out where one of the problems lie. I'll ask the printer his opinion before second proof, but I don't like to annoy him unnecessarily.
One of the chapters in the book has a lot of maps. I drew rivers by stroking a path, and named the rivers using 'Text on a Path' so that the text follows the curve of the river. Some of the maps have a pale background image on a different layer. And this is where the problem seems to lie.
1. Rivers (and their names) appear normal on a map WITHOUT a background. By 'normal' I mean they look sharp. When magnified they seem to have been drawn as vectors.
2. On maps WITH a background layer, 'Text on a path' appears very chunky (as if it has been rasterised at about 300 dpi) and paths (the rivers) appear to have the jaggies. Horizontal text does not appear to be affected.
I can't be certain that (1) and (2) exactly define the problem, but it's as close as I can get at the moment.
When I opened the original PDF file from which the book was printed, no matter how much I enlarge it, all paths and 'type on a path' retain their smoothness. i.e they are obviously vectors. However, I noticed when I opened the PDF in Acrobat 7 and tried to edit the 'text on a path', the PDF went haywire: the text I tried to edit disappeared, and other text frames on the page were shifted around.
A sample PDF (6.7 MB, including an original two-page spread, and a scanned copy of the iGen print of the same), can be downloaded from:
http://www.mediafire.com/download.php?oe4omuzoqzz
Two questions:
Q1: On the maps with a background image, is the rasterising of stroked paths, and 'text on a path' due to the iGen mishandling the file? Or might there be another explanation?
Q2: Re Acrobat 7 mishandling my 'text on a path': is this a bug that has been fixed in later versions of Acrobat?
To reproduce this bug do this: Open the PDF described above, and within Acrobat 7 select Tools > Advanced Editing > Touchup Text Tool. Then click inside the name "Georgina River", backspace to try and delete a letter, and the PDF should go haywire.

Sandee: Almost certainly below the text, but I'd have to check them all.
But before I do that, we'll have to go back a step. I can almost handle layers in InDesign, but didn't know they existed in PDFs. The printer printed from the PDF and as far as I can tell after a brief visit to HELP, there aren't any layers in the PDF. When I go to View > Navigation Tabs > Layers and click on the Layer Tab when it appears, there's nothing there; and all the items under Options are grayed.
Q1: Why do I need a layer in a PDF? By not having layers, can that cause problems?
Q2: Re Robert's suggestions: what do you mean by "move all the text to a top layer"? Within InDesign before I export to PDF?
Q3: Is printing more foolproof when I export to PDF, if all my text is on the one layer in InDesign and that layer is above any images? There are several hundred river names, place names etc, sitting on lower layers, but if need be I'll move them all.

IWeb page printed from iWeb site comes out BLACK on some browsers

I made and run a website for a local art group. iWeb works well for this purpose. I publish the site to our domain. The main site is for the public and a second site, password protected and reached through the main site, is for members.
I've put the entry form for our biggest annual exhibition on the website, intending that members can print it from there (most have hard copies as well). Printing works perfectly from Safari. But many members have PCs (grrr) and use things like Firefox and IE.
Firefox prints the iWeb pages totally BLACK. IE prints okay on some computers and not on others. A clue is that, if you look fast as you open an iWeb page in IE, you see all the layout components in light blue; it immediately disappears. But that is the part that prints out black.
What on earth is causing this and HOW can it be prevented?? I have used NO background color on my pages.
Thanx,
Margot
17" iMac Mac OS X (10.4.9)

That ain't right! What you need to do is use web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
... and a few other tricks to cope with IE...
http://www.iwebformusicians.com/iWeb/iWeb-Internet-Explorer.html
http://www.iwebformusicians.com/iWeb/Browser-Compatibility.html

Undesirable and random GET_CONFIG pages printing from HP Color LaserJet CM2320fxi

Similar Messages

Maybe you are looking for