"undiagnosed_problem" errors from fmd after installing 2nd CPU

Hi everyone,
[Disclaimer: I am not a professional Solaris sysadmin]
I have an HP Proliant DL145 g2 server. This is an AMD Opteron box running Sol10 x86. I recently installed a second cpu in this machine. Now, the fault manger daemon is logging the following error, once every 10 seconds:
From fmdump -v:
Sep 06 10:50:50.5527 4f2ab3b1-df9d-6c47-8cfd-ab8471036c65 SUNOS-8000-1L
100% defect.sunos.eft.undiagnosable_problem
Problem in: -
Affects: -
FRU: -
A little more info is available from dmesg:
Sep 6 10:48:30 compile2-02 fmd: [ID 441519 daemon.error] SUNW-MSG-ID: SUNOS-800
0-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
Sep 6 10:48:30 compile2-02 EVENT-TIME: Thu Sep 6 10:48:30 PDT 2007
Sep 6 10:48:30 compile2-02 PLATFORM: ProLiant DL145 G2, CSN: MX262600HJ, HOSTNA
ME: compile2-02
Sep 6 10:48:30 compile2-02 SOURCE: eft, REV: 1.16
Sep 6 10:48:30 compile2-02 EVENT-ID: d788f719-2ae3-4a6b-e3f9-c4581676b122
Sep 6 10:48:30 compile2-02 DESC: The EFT Diagnosis Engine encountered telemetry
for which it is unable to produce a diagnosis. This may indicate an incomplete
EFT file provided or a defect in the diagnosis algorithm. Refer to http://sun.
com/msg/SUNOS-8000-1L for more information.
Sep 6 10:48:30 compile2-02 AUTO-RESPONSE: Error reports from the component will
be logged for examination by Sun.
Sep 6 10:48:30 compile2-02 IMPACT: Automated diagnosis and response for these e
vents will not occur.
Sep 6 10:48:30 compile2-02 REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fau
lt management software is installed properly. Contact Sun for support.
I tried installing the relevant fmd patches (118344-14 and 125801-01) but this didn't help me. The system appears to be working, but the incessant logging by fmd is troubling. Does anyone have any insights they'd care to share?
Thanks in advance,
Larry Barnett
Palamida, Inc.

use :
export NSS_STRICT_NOFORK=DISABLED
before starting the directory and admin server.

Similar Messages

Error in finder after install osx mavericks

error in finder after install osx mavericks

I have a similar problem but the error code that keeps coming up is -600 please help !

Errors starting JBoss after installing OIM

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

Error message 16 after install

I have error message 16 after installing Photoshop CC and LR 5. I've tried uninstalling and re-installing. I have a MacPro running Mavericks. Any ideas?

well, it was worth a try...Any other suggestions? It still isn't working.

Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL. When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up. When I log in with my Apple ID I just get: The Apple ID you entered couldn't be found or your password was incor

Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL.
When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up.
When I log in with my Apple ID I just get:
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
I have however made sure that this is the correct Apple ID and password that I am putting in. In the Mac App Store it works.
Do you have any solution?
I am running Mavericks 10.9.2.

To post a screenshot click on the "Camera" button at the top of the reply box and upload it there.
MtD

HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3 Any solutions?

Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

Error trying to open pdf file from Internet after installing acrobat prof. 7

I am experiencing issues when I try to open pdf file from Websites after having installed Acrobat Professional edition 7
Can somebody suggest a remedy?
Thanks
Michele Rossitto
[email protected]

Thanks for your reply. The only way I can open the pdf file is to save it locally. I don't understand why can't I just click and open the pdf file without saving them
Regards
M

Error code -42110 after installing intunes 64

Hi,
after installing iTunes 64 (Windows) on my new Netbook I get an error code (-42110). Also it is not possible to synchronize my iPod. I can press the button "synchronize" but nothing happend. So my music can not be "downloaded" from iPod into new Mediathek.
Any idea what to do to fix it?
Thnaks for support

For the 42110 error try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.

Error from log, after rebootDatabase Manager not working

Ok, lets try this again :- )
I got Ubuntu 8.04, 32bit installed on a DL360 G3, I figured that I can learn how Oracle works, I don't want the Express Version, I need to learn what we will be using at work and not a limited edition.
After I re-boot the server I can't access what worked before, the Management URL:
https://dragonfly.mydomain.com:1158/em
so I type:
**raymond@dragonfly:/u01/app/oracle/diag/tnslsnr/dragonfly/listener/alert$ lsnrctl**
**LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 07-OCT-2008 18:03:15**
**Copyright (c) 1991, 2007, Oracle. All rights reserved.**
**Welcome to LSNRCTL, type "help" for information.**
**LSNRCTL> status**
**Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))**
**STATUS of the LISTENER**
**Alias LISTENER**
**Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production**
**Start Date 06-OCT-2008 18:03:01**
**Uptime 1 days 0 hr. 0 min. 24 sec**
**Trace Level off**
**Security ON: Local OS Authentication**
**SNMP OFF**
**Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora**
**Listener Log File /u01/app/oracle/diag/tnslsnr/dragonfly/listener/alert/log.xml**
**Listening Endpoints Summary...**
**(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))**
**(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dragonfly.mydomain.com)(PORT=1521)))**
**Services Summary...**
**Service "ORCLXDB.mydomain.com" has 1 instance(s).**
**Instance "ORCL", status READY, has 1 handler(s) for this service...**
**Service "orcl.mydomain.com" has 1 instance(s).**
**Instance "ORCL", status READY, has 1 handler(s) for this service...**
**Service "orcl_XPT.mydomain.com" has 1 instance(s).**
**Instance "ORCL", status READY, has 1 handler(s) for this service...**
**The command completed successfully**
**LSNRCTL>**
it lists port 1521 ? is that a different service, what is that ?
I tried
https://dragonfly.mydomain.com:1521/em ( I tried the direct ip address too )
error from browser is:
The connection to 192.168.1.105:1521 was interrupted while the page was loading.
The connection to dragonfly.mydomain.com:1521 was interrupted while the page was loading.
Interrupted, WTF ?
so I do the next logical step and look inside the log file, results are a repeating problem, same repeating entry:
*<msg time='2008-10-07T18:06:08.271-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>07-OCT-2008 18:06:08 * 12502*
*</txt>*
*</msg>*
*<msg time='2008-10-07T18:06:08.272-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>TNS-12502: TNS:listener received no CONNECT_DATA from client*
*</txt>*
*</msg>*
*<msg time='2008-10-07T18:06:08.273-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>07-OCT-2008 18:06:08 * 12502*
*</txt>*
*</msg>*
*<msg time='2008-10-07T18:06:08.273-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>TNS-12502: TNS:listener received no CONNECT_DATA from client*
*</txt>*
*</msg>*
*<msg time='2008-10-07T18:06:27.385-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>07-OCT-2008 18:06:27 * 12502*
*</txt>*
*</msg>*
*<msg time='2008-10-07T18:06:27.385-07:00' org_id='oracle' comp_id='tnslsnr'*
type='UNKNOWN' level='16' host_id='dragonfly'
host_addr='192.168.1.105'>
*<txt>TNS-12502: TNS:listener received no CONNECT_DATA from client*
*</txt>*
*</msg>*
Some Help, what do these errors mean ? are they the root of my problem ?
I need to get this problem, fixed!! it's starting to bug me.

I stopped reading here: "I got Ubuntu 8.04"
Oracle is supported on many different flavors and versions of Linux: This isn't one of them.
If the point is to learn Oracle then learn Oracle in a fully supported configuration.
Now, instead of learning Oracle, you are leaning what happens when people ignore Oracle's advice and go off making a mess of things on their own.
If you use a supported configuration you can just follow the docs and it installs properly.
If the goal is to become an Ubuntu expert keep following the path you are on. If the point is to learn Oracle I'd suggest a course correction.

Continuous error beep/alarm after installing USB printer

Anyone have any experience with a continuous disabling/enabling of a USB device (in this case a printer) after installing on an X201 running Windows 7 Pro 64 bit? Printer (older HP 2420) installs as expected in Win 7 and test page prints as desired. Shortly thereafter the device seems to drop/readd continuously, and the only way to fix is to unplug the device.
Any assistance? Thanks.

I think I understand what you are trying to do now. How are you trying to install the printer software (download from website or software disc that came with the printer)?
Are you certain your USB cord is working?
Is your XP computer compatible with the Belkin switch?
Does your switch require software installation as well?
I think your error about the USB device not being recognized sounds more like a computer/Windows error message such as the Belkin device itself is not recognized by the XP computer because that is not the same words used when the printer is not recognized. I don't want to refer you back to Belkin so I will do my best to assist you but I can only hope I can fix this because this is what I call out-of-scope for me and do not have any formal training on your method. Maybe I can come up with a work-around instead. Answer my questions please while I think of perhaps another configuration of these devices more suitable for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

All of my pictures are gone from iPhoto after installing Yosemite..how do i get them back?

I have tried everything to get my pictures back after installing Yosemite on my laptop. Are they gone? Or is there a way to retrieve them?

Define "everything" because if you've tried everything then your last recourse is:
1 - restore your backup copy of your iPhoto Library created just prior to your Yosemite upgrade or
2 - Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

Error with keychain after installing xquartz "A keychain cannot be found."

After installing xquartz on Snow Leopard I can no longer sign in to iCloud. I get an error that says "A keychain cannot be found to store ####" How do I fix this?

simple restart fixed it

MacBook Pro won't wake from sleep after installing Snow Leopard

If my MacBook Pro is running while closed with an external display and I unplug it from the display it goes to sleep - as indicated by the white light and the front pulsing. If I then open the MacBook the display remains blank and it is completely unresponsive to any keys or track pad input.
The only thing it responds to at that point is holding the power button down until it powers down and then restarting - loosing all work in progress at that point.
Before installing Snow Leopard the Mac would wake reliably when opened from this state.

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

TS3824 My iMac won't wake from sleep after installing the most recent OS update.

I'm having trouble with my iMac, the screen won't wake up after it goes to sleep. The one time it did the screen was all fuzzy and pink. This has only happened in the last few hours after installing the latest OS X Lion update. Is this normal? Can someone help?

Hello, not normal.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
Re-install if that doesn't work.

"undiagnosed_problem" errors from fmd after installing 2nd CPU

Similar Messages

Maybe you are looking for