Undo a deletion

I keep accidentally hitting delete on a note and cannot undo?

Okay, thanks.
I think the issue, because I have done this so many times, is that the Delete is in RED and the Close is in Grey.  I think that in general, I look for the Bright Coloring to denote Save or the like and the Grey as the "Other" option, not the primary option. 
Not sure if you can do anything about that but thought I would share for what it is worth.
Peace,
Renee
Renee Kesler

Similar Messages

  • Undo Sheet Deletion Bug (DIAdem 2014 SP1)

    Hello,
    I am experiencing a bug in the Report section of DIAdem.
    I have ~80 sheets in a report.  I delete the last one by right clicking and selecting "Delete".  I confirm the deletion when prompted and the sheet goes away.  I now press Ctrl-Z to undo the deletion.  DIAdem appears to reload the whole set of 80 sheets and the sheet that I deleted is back.  The undo function works.
    The problem I have now is that I lose the mouse input for the report section and data portal.  I am able to change the view to NAVIGATOR, VIEW, etc. with the mouse but I can't click on anything else including the pull-down menus.  Keyboard navigation works as I can move around the report and edit Text blocks, etc. but the mouse input is completely gone.
    I am using DIAdem 2014 SP1.  Can anyone replicate this issue?
    Thanks,
    Jacob

    Hi Jacob,
    Could you export your DIAdem reports as a .TDR file so we can try it out on another system and see if the problem is reproducable?
    Thanks

  • Undo Message Delete command is sometimes present, sometimes not

    I've noticed that sometimes the Undo Message Delete command is present after I delete a message
    but other times it isn't - all that's there is Undo which is greyed out. Does anyone know the conditions
    under which the Undo Message Delete command appears? I haven't found any consistent pattern.
    I know the message can be manually moved back from the Trash but I've found that occasionally I've inadvertently
    deleted a message without knowing which message it is which makes it rather hard to find in the Trash.

    Open your firewall program. First check the settings. Make sure that the
    program is set to tell you if a new program wants access to the web. Then
    go to the list of programs the firewall has. Make sure that all the programs
    you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
    firewall may not allow access.
    ====================================
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Can I undo accidentally deleted text history?

    Can I undo accidentally deleted text history?

    Soul-Power wrote:
    Can I undo accidentally deleted text history?
    "Text history?"  What do you mean by this?
    Barry

  • No Undo on Delete!

    I just thought I was deleting about 25 images from a folder that I thought I had filtered down to reject flags and then found I actually deleted the entire database of 565 or images. I immediately tried escape but that did nothing. I took no other action and found the Undo command to be greyed out!
    Is it true that undo will not work for a delete!
    I'm beside myself, I was able to restore the images from the trash and I have a backup, but several hours of work seperating these images by class and car number is now gone? Is there any way to get back what I had?
    I've never had a program that could not undo a delete like this.
    If I could figure out how to close the database and not save it, I could gain back a couple of hours of work? I haven't done anything other than re-import the images and of course all the keywords I used to sort with are gone.
    H E L P !

    Thanks Pete.
    The 4 times I'm referring to were over the course of the last couple of days. It was at least 4 times that I opened and closed lightroom during that period. Everytime, I had it do the backup, into the default backups folder created under my main image folder.
    The 3 times I was referring to was right at that time, I opened and closed 3 times and during none of those times did it ask about doing a backup, I don't know why. I was trying to point out to Mr. Personality that Lightroom does NOT work as he thinks it does all the time, because it should have been asking about the backup, I immediately checked the preferences on each of those three times and it was set for backup upon opening.
    By the way, is there a way, while you have LR open to tell it to save the database right then?
    Regarding the delete:
    I just finished my last grouping of images in this database. I make a seperate database for each job as I'm not a stock shooter, I don't need one huge database of all my images. (Plus I have major trust issues right now). I was using the keyword panel to organize the images. I filtered using the rejected flag filter icon so I only saw the rejects. (BTW, I learned about the quirk you are talking about when I thought I had deleted images but found them all still in my galleries after I posted online had to redo all of them for an event so yes I'm all to familiar with that. A customer actually ordered one and I found it should have been culled when I pulled it up to fill the order, thank you LR, that made me look real good.)
    I then clicked on the folder panel so that I could delete them, but what I didn't realize is that doing so also turned the reject flag filter button back off. Not realizing that it would do that, I hit the delete key and didn't read as I had no reason to think I needed to, but as soon as I clicked okay, I realized there were 595 images selected instead of the 25 or so I really wanted to delete. I thought I was okay because I could just undo the delete. Well LR being the speed demon it is, it took about 20 minutes to delete the images, then I checked the undo and it was greyed out.
    I totally accept the fact that I should have noticed, I reject the fact that I was too stupid to notice and frankly had no reason to believe the filter would be turned off just by switching panels. Then of course I started to restore from the backup and redo what I had done since the last backup and then I find no backup.
    I've handled this just like other galleries I've done and they all have the back up. I have searched extensively through my system and there is no backup file for this catalog, anywhere.
    My first issue was that you can't undo a delete, based on other software out there that is a basic thing that I think should be there. I also don't understand why the escape won't stop an action as every adobe product I've ever used does.
    My second is why on earth would it turn the filter off because I changed, not even panels, but levels in the same panel? What reason would that be? Particularly if I HAVE to go to the folder heading to actually be able to delete something, that's all the more reason everything should stay as is.
    It did by the way, leave all the keywords behind, just with a 0 quantity. Upon re-import it looked like it may re-assign them but it didn't.
    I redid everything and checked this time, there is a backup.
    Maybe I do have a chip on my shoulder, I've been forced to switch to lightroom because they squashed the best program out there for my workflow, I know I can still use it but once I buy my next camera, RSP will be useless, so I am somewhat bitter about this whole thing. Throw in the horrible speed issues and now this, hours of work down the drain, I am not happy, I just didn't expect to have a Schewe Soap Opera to deal with when I voiced my issues.
    Anyway I apologize to everyone having to read most of this for letting him bait me into his little game and hopefully this will turn into something at least some of us can learn from. Sorry so long, just trying to get it all out there.

  • Undo Delete after it says "cannot undo this delete."

    How is this done for an audio file recorded and subsequently deleted in Logic? OS X Snow Leopard iMac, Logic 8, I deleted the wrong audio track (ouch) and it said "Cannot Undo this delete." Well, I need to undo this darned delete! Where is the file I deleted??? It must be on the drive somewhere.
    How to recover it? Haven't closed this same session within the application yet.

    If the deleted file was recorded since the opening of the project, it is erased from the drive. A dialog warned you about this.
    If the recording took place before the current session, it's still in the Audio Bin.
    In general, warnings about deletion, erasure and other non-trivial file management stuff are better taken seriously. If it says 'cannot undo this delete', this usually means it cannot undo this delete.
    Christian

  • How do you undo a delete on the iPad on notes

    Help, have just selected all and pressed delete on notes, can you undo this and if so how?

    From more like this on the right side of the page.
    Demo      Pittsburgh, PA
    This solved my questionRe: How do i undo a delete from trash a lost note?
    Jan 16, 2012 1:41 PM (in response to Deeponion)
    There is no way to undelete a note. If you delete it, it is gone. The only possible way to retrieve it would be to restore the iPad from a backup that contains that note.
    Report post Like (1) Reply

  • Undo of deletion flag for network activity

    Dear Gurus,
      When I am uploading the network activity from MSP, unfortunately deletion flag was set to all the activities and network. I undo the flag for network, but I couldn't find and activity under the network. Also, I am unable to create with the same number as well.
      Kindly help me undo the deletion flag for the act ivies.
    Regards,
    Punith.

    When you are in CJ20N, click settings and option, there select "Display deleted objects", now open your project, you will see activities with deletion flag status now. select and undo the deletion flag status.

  • Can we undo a delete on the Z10?

    Is there anyway to undelete? I deleted a message I meant to copy by highlighting it and selecting paste instead of copy! I pasted in a phone number that was still in memory. Drats

    Hello kenarenson,
    Thank you for your question regarding message deletion on your BlackBerry Z10 smartphone.
    Currently there is no undo function that recovers deleted email.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • How can I undo the deleting of a calendar?

    How can I undo the accidental deleting of a calendar within the ipad calendar program? How can I generally undo things I did within the ipad programs?

    Hi,
    Per my understanding, you might want to check if there any overlapped recurring events in Event Receiver.
    You can build the query with <DateRangesOverlap> to return the recurring events with Server Object Model.
    A code demo in the thread below about how to get recurring events from Calendar for your reference:
    https://social.technet.microsoft.com/Forums/en-US/99c3ded6-a8cb-4509-9a74-e93e445d78c7/how-does-calender-list-daterangesoverlap-todaymonthyear-and-week-exactly-work?forum=sharepointdevelopmentprevious
    Thanks
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Undo/Redo Deleting of Playlists Feature, And More...When Were They Added?

    Hi All,
    I started "Playlist Cleaning" today, (I have over 500 p/ls), and just noticed that the iTunes 'Edit' menu now(?) includes the option to not only undo the accidental deleting of a playlist (or redo it as well), it also has the ability to undo the dragging and dropping (copying) of a song(s) into a playlist, And, go back and undo several of those tasks as well...pretty cool.
    Whenever these features were added, they sure are welcome ones...But if they've been around a while and I just didn't notice them...someone please delete this post...(or not)!!!

    Hi All,
    I started "Playlist Cleaning" today, (I have over 500 p/ls), and just noticed that the iTunes 'Edit' menu now(?) includes the option to not only undo the accidental deleting of a playlist (or redo it as well), it also has the ability to undo the dragging and dropping (copying) of a song(s) into a playlist, And, go back and undo several of those tasks as well...pretty cool.
    Whenever these features were added, they sure are welcome ones...But if they've been around a while and I just didn't notice them...someone please delete this post...(or not)!!!

  • Cannot undo for deleted messages - using gmail

    When I delete an email message using the Mail application I cannot go to the edit menu and choose undo.  It does not allow me to choose this option.  At one point I was able to do this, but I must have changed some settings in trying to get my email to sync properly.  I read a post on the web that said the gmail imap setting should be set auto expunge off- wait for the client to update the server.  I did do this and also chose move the message to the trash in the gmail imap settings.  Any input in what I can do resolve this issue woould be greatly appreciated.  Thanks in davance.

    You must delete the account on your iPhone and recreate the account as a POP account.
    When recreating the account, don't choose the Gmail account preset.
    Select "Other" instead and then POP as the account type - entering the required account setup information for accessing the account as a POP account.

  • Is there a way to undo the deleting of the file?

    I accidentally deleted a very important lecture

    I am pretty sure I did. It showed it was backed up at noon today and I just delete it

  • Undo Datafile deleted, How to startup database?

    Hi
    I was getting that message when startup database
    SQL> startup
    ORACLE instance started.
    Total System Global Area 167772160 bytes
    Fixed Size 1218292 bytes
    Variable Size 83888396 bytes
    Database Buffers 75497472 bytes
    Redo Buffers 7168000 bytes
    Database mounted.
    ORA-01157: cannot identify/lock data file 7 - see DBWR trace file
    ORA-01110: data file 7: '/u01/app/oracle/oradata/impl2pk/undotbs02.dbf'
    Later on got to know that a datafile was deleted.
    Anybody help me how to start database now?
    Thanks

    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5669213349582Khurram

  • Urgent --Please Help via undo trash delete

    Hi All The Apple User,
    Today afternoon I'm running Boot Camp via Window XP downloaded a Daemon Tools software, however it attached a virus called Mr.Lin Mutation Virus, which is covered by a fake NOD32 Folder, it run automatically when I install the Daemon Tools, in begin it running like the virus scanner, but after restart, all the files and data ( more than 200GB ) in my portable hard drive were completely gone, then just left all the named empty folders in my HD, even the original security application from my portable hard-drive was also being erase.
    However, the part of my Boot Camp was not effect.
    So now that we know the virus running in begin actually was deleting the data from my mac.
    As I remember a years ago I have been tried a software for getting back the deleted file from the trash,
    but now I couldn't find it again.
    So does anyone know how to get it back ? Please lend a hand, there are something important inside.
    Also, does anyone know the way of data delete in the Mac is it as same as the way of Boot Camp ?
    Thanks in advance for your answer and reply.
    BenNovello

    you have a windows virus and it only affects windows partition and windows drive.
    this virus can do nothing to your OS X partition.
    as your problem is exclusively with windows you should ask on a windows forum not on a mac one. there are data recovery windows programs and antivirus windows programs. you need those. but again, ask on a windows forum.

Maybe you are looking for

  • Sql Query To Find Out list of users not having a particular resource provisioned

    Hi, I know the query for all the resources tagged to user with their account status. Can anybody help me with a query to fetch just the user details for the following scenario: 1)Active users having  having no instance of a particular resource. Condi

  • Error on posts reply

    What is wrong?! Now I can't reply to some posts, becaus e this message appears: User Login You do not have permission to post in this forum. You currently have read only access to Apple Discussions. If you wish to post to Apple Discussions then we wi

  • Simple question: Why can I see the aperture images...

    I can see the librarys from aperture in other applications , but i can't see the images. How can I solve this. thanks leonel

  • Cannot add another device as Account Owner

    I am trying to add another device to add my boyfriend onto my plan. Whenever I try to do this, I get a screen telling me that it is not authorized because I am not an Account Manager. However, on my My Verizon page it says that I am an Account Owner,

  • HT2297 Raw+jpeg issues for exporting

    I have a Nikon d5100.  I accidentally shot some footage in Raw.  It was imported on my Mac Pro as raw+jpeg now I can not export, copy to disk, or flash drive.   I just want to print the photos can anyone help me?   I also tried to export to costco bu