Undo changes from a Change Request

Hi all,
How can I undo changes that are included in a certain CR ?

Hi,
Go to version magmt. Viz. Se38-->Pgm name->Display, The Utilities -
>Version-->Version Mgmt->Put a tick in the check box of the previous request ( or any request whose source contents are to be retrieved ) & the Version--->retrieve.
I hope this helps,
Regards,
Raju Chitale

Similar Messages

How to import a Change request from One application to another application.

Hi,
In SRM Dev system I have created a Change request (Transport Request) and released to the QA system.The Change request has imported successfully to the SRM QA system.
Now the Case is:
The Released Request in the SRM Dev system has to be Export to the CRM Dev system.
Is it possible to Export the Released Change Request from SRM system to CRM system?
If possible then can you provide me with the solution.
Thanks in Advance
Dharma

Hi,
Your system admin knows how to do it. System admin should define transport route. Please check it in transaction STMS.
Regards,
Masa

Move change request from a maintenance project to another project

Hello all,
we want to close a maintenance project A and create a new maintenance project B. We have a lot of change request they aren`t finish, so we want to move them to the new maintenance project.
The following steps we have done:
1. Doing all phases of the maintenance cycle of project A.
2. Close maintenance cycle project A.
3. Create a new project B.
4. create a new maintenance cycle for project B.
Now, we have the problem, that all change request from project A and maintenance cycle A didn't move to the new project B and cycle B.
If you create a new maintenance cycle in project A, all open change requests move to the new cycle. But we want to move them to a new project and a new cycle.
Have anybody a suggestion how to do this?
Kind Regards
Marc

Hello Marc,
there are a couple of methods in a class that might help you if you DO have to do it... but SAP will not support you in case you have any problem.
you can take a look to methods of class CL_HF_HELPER.
Methods :
SET_BO_LINK_TO_CHNG_DOC is used to set link between SDMJ and SDMN
SET_BO_TASKLIST_OF_CHNG_DOC is used to set link between SDMJ and tasklist
as there are those methods, to create links SAP, provides some others that are supposed to break them (If i remember well they are not activated or finished but you can still have a look !!)
Those methods are
DELETE_BO_LINK_OF_CHNG_DOC
DELETE_BO_TASKLIST_OF_CHNG_DOC
RECREATE_BO_LINK_OF_CHNG_DOC
RECREATE_BO_TLIST_OF_CHNG_DOC
Hope this helps
One more time... be carefull with those methids... I think it s quite dangerous to handle those kind of things without SAP's support.
Also, one mote thing... since many many customers have asked for this functionality; SAP is trying to develop the whole thing (with adjustments of Checks functionalites of ChaRM) for the next releases. Maybe that will be part of the next release
Regards
Khalil

Re:Error while importing the TP from dev to quality through change request

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Unable to release the change request from se01

HI All,
Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
Please help me to release the request and implement in the landscape.
Thanks,
Rajesh N

Hi,
Activate the object using se03 and then relaese the request
thanks

Change Request Management--Create Transport Request from Service Desk

Hi Experts,
What are the right steps to create a change request via service desk message and keep following the process until import to PRD.
Regards.

Hello Jorge,
You can create Change Request using two ways.
You can create a Change Request from a Service Desk Message using the action "Create Change Request" or you can create a Change Request directly in transaction CRMD_ORDER.
Please, check the links below where you can find more information about Charm.
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
Best Regards,
Diego Fischer,

Change Request SDCR - Sold to Party has to appear by default from IbaseComp

Hi,
TCode: CHARM_CREATE
In this screen I dont want to enter the Sold to party.
'Sold to party' has to come by default based on the IBase Component entered In Change Request SDCR Transaction. Is there any setting for the same.
In case of support desk when we create a message, sold to party comes automatically, Bcz in IBase Partner Sold to party is maintained. Like this can we make it for Change Request(SDCR) transaction.
Regards
Praveen Khot
+91 9724035023

Hello Praveen,
To make the "Sold To Party" be determined from the IBase in the SDCR, you have to adjust the partner determination procedure SDCR0001 using the same access sequence for "Sold To Party" than in the partner determination procedure for the SLFN (i.e. 0018 SAP Service: Determination via IBase/Ind Object from Ref. Object Set).
Then in CHARM_CREATE, leave the "Sold To Party" field blank. It will be populated during the creation. Go to CRMD_ORDER to check the assignment.
Hope this helps.
BR
Stéphane.

Change Request deleted from Buffer

Hello,
If a Change request is deleted from the buffer, before it is imported into the system.
Can we determine which user ID deleted the Change Request from the buffer?
Thanks,
Gautam.

Not sure ...if u can get this info directly....However have a look into the table E070USE...Might help!

Creating Change request from an Issue

Hi, all.
We have created new transaction type for change request (SDCR at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
Whether there are to it reasons or notices in the documentation?
Whether there was for you such problem and how you solved it?
Regards,
Konstantin

You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
Do this in IMG task "Define Mapping Rules for Copy Control"

Create a change request for multiple customers from spreadsheet

Hello Experts,
1.We have a spreadsheet with 100's of Customer data maintained in it , can we create a change request by downloading data from spreadsheet directly instead of manually entering the data in the CR. Also can we create a single change request for multiple Create customers.
2.Can we create CR's automatically , lets say we have 100's of customer data loaded into MDG hub by Data Services using DEBMAS Idoc , can this create automatic CR's , is this possible.
Thanks.

Dear Collins,
1.We have a spreadsheet with 100's of Customer data maintained in it , can we create a change request by downloading data from spreadsheet directly instead of manually entering the data in the CR. Also can we create a single change request for multiple Create customers.
Answer:there are various options are available in MDG to process multiple material as shown below
you can down load the customers using file down load funcationality and same change,upload the customers using the file Upload process.
you can create a single CR for muntiple customers options are shown below.
2..Can we create CR's automatically , lets say we have 100's of customer data loaded into MDG hub by Data Services using DEBMAS Idoc , can this create automatic CR's , is this possible.
Answer:Yes you can create CR automatically using DTIMPORT tcode and some configuration needs to be done further reading go to the link SAP Master Data Governance - SAP Library
regards
shankar

Change Request from Email

Is it possible to create CR from email? I need some operations convert to CR instead of incident, for examle i need such user requests like asking for new work plase or upgrage the computer to be CR at the begining when they send email, but now an incidents
are created for such typical user requests by default.

As far as I know it's not possible to create a change request by mail in SCSM 2010.
In my opinion from the process perspective it didn't make sense to do that anyway:
For a change request you need some more information like "which type of CR -> minor change, major change, ... Most of the users didn't know which type of CR is needed. Depending on the type of the CR there might be completly different activities behind
a CR. E.g. also risk and impact of a change the users didn't know.
For that reason I would always go for a process like this: User opens an incident by mail with his "wishes". Incident management process is deciding if the request should be handled as a change request and which type of change request would
fit. Incident management opens a corrosponding and related change request.
Andreas Baumgarten | H&D International Group

Creating Change Request from project structure

Hello.
Have somebody maked somthink like creating Change Request from Implementation project configuration structure? I want to initiate new change request directly from busines process step in transaction SOLAR02 for example.

Hi
Change request is created via action Create change document from support desk message
so in solar02 tcode...goto issues/messages tab and create a message then
crm_dno_monitor you can create a change request as i said and all the necessary data like ..system data,ibase etc is copied to ur change req from support message .
Regards
Prakhar

Changing from local change requests to transportable

Hi gurus
i have a system that has transport system set to Local change Requests and would like to transport them into another system .The transports have been released .what is the quickest way to change this without redoing the transports?
Any ideas are welcome

Hi,
did you configure STMS and transport route?
if yes then process as follows.
create new workbench request using SE10
SE10 -> create -> workbench request ->
give the description and target system SID.
select the request and click on include object ( ctrl + F11) check object list from request and enter you local transport request number. -> enter
release the new request and import it in target system.
regards,
kaushal

When creating a Change Request from within an Incident - Can Pull in the Information from the Inicdent?

My users are currently creating a lot of Change Requests, and we have templates. What they want to do is to pull in the relevant information from the Incident like title, description, attachments, affected user, etc. I have seen similar things where people
are changing an incident to a service request, and wondered if it were possible to do it from Incident to Change...
http://gallery.technet.microsoft.com/Create-Incident-from-f19aaea0/view/Discussions

iPhoto puts them in the book in chronological order. So to get your photos from an album into an iPhoto book in the same order you will need to use the Photos ➙ Batch Change ➙ Date menu option and set them all to the same date with a 1 minute time difference between each.
OT

How to trigger Solution Manager Change request from an external system

Hello All,
I have a scenario where in I would like to create and trigger a Change Request in Solution Manager from an external system, for instance, a custom web application. How could this be done? Are there standard interfaces (BAPIs) available in Solution Manager for doing this? If yes, then what are the BAPIs? Or Can a custom RFC be developed to achieve this..? If yes, then what are the underlying / base BAPIs that could be wrapped?
Any pointers will be highly appreciated. Sorry if the question is naive. I'm a novice to the Solution Manager topic.
Bala

Hi Bala,
I am facing the same issue. I want to create a change request in background from an external application, like an adobe form for instance. Would you be so kind to tell me, which BAPI you used in your solution?

Undo changes from a Change Request

Similar Messages

Maybe you are looking for