Undo changes included in a transport request

Hello,
I made the changes in DEV system and included those changes in a transport request. I didn't released this transport. Then I realized that those changes must be reverted. What should I do now? How can I undo those changes? Thanks

Revert back your changes you had done if required.
Then SE09 --> Display your request No.
Expand your main Request Folder --> Below your main Request No you can see Child Request No. Double click on Child Request No. Click on Change Mode or press Ctrl+F1 . Then under Object Tab you can see objects.
Select Those objects and click on Delete Row which is be a second button having RED marked minus symbol.  It will give message like object is locked press ok. Automaticaly object will be removed from request. Do same procedure for all oject one by one.
Regards,
Sushant

Similar Messages

  • Change the owner of transport request

    Hi,
    I want to change the owner of transport request. How can i do this ? Plz. Help.
    Regards
    Sandeep

    Hi
    Go to SE10, Enter the transport request number and press F5 to change the owner as per your req.
    Regards
    S.Senthil

  • How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created  ?

    Dear Abapers,
    I request the Abapers kindly reply for this blog
    I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ? 
    I checked in SE03 transaction the transport request was there.  But I want to retrieve the existing transport request which is not moved to Quality?
    Is it possible to retrieve the existing transport request in development which is not moved to quality ?
    Like how we retrieving the programs using versions in development server,  In the same way I want to retrieve the sapscript layout in development server ?
    Thanks & Regards
    Muzeebur Rahiman.S

    Hi,
    There is no version management for SapScript or Smartforms .
    When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
    I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
    cheers
    Jānis

  • Include changes of PH in transport request.

    Hi Experts,
    Able to create transport request which is available in TCode SCAL to transport PH/ Calendar. How can i include only my changes in the transport request.
    for eg. if i have created new holiday calendar "NI" and new holidays id's. How can i include in transport request only my calendar NI and holiday id's.
    Kindly guide.
    Regards,
    M Bharath

    As far as I know, all the tables pertaining to Statutory Holidays, Holiday Calendars and Business/Factory Calendars will be included in the Workbench Transport.
    It may be possible to delete some of the tables from your transport, but I would not recommend it.
    Don't forget that your changes will not have an impact unless you re-generate the Work Schedules using the NI Calendar, and that will be a separate Customizing Transport.

  • Including InfoPackages in Transport Requests

    I want to include an InfoPackage in a transport request so that I can transport it from development to test. However, when I open the InfoPackage and try to include it I receive an error message informing me that Deltas have already been loaded. This is correct, but why would it stop me including the InfoPackage in a transport request?
    Does anybody know what I can do about this?

    Hi Stuart,
    I guess you are trying to transport the "init" load infipackage. If so then change the load option to "full load" and then transport. You can later change the option in QA.
    Bye
    Dinesh

  • How to include an INCLUDE into a Transport Request

    Hi Experts
    Requirement is to add an INCLUDE program object (which is not part of any other request) into a Transport Request. I followed the below steps:
    SE01 -> Entered TR# -> Display -> Request/Task -> Object List -> Include Objects.
    In the selection screen of "freely selected objects",
    selected objects -> Program = LZ123T00 (which I need to include).
    Then, Execute!
    It shows: No objects were selected!
    How to fix this error?
    Regds

    Hi Varun
    thx for ur reply. I tried this. it seems the INCLUDE alone cannot be written into the TR.
    it says: "Cannot be added. The object is part of some system object"
    If we add the whole Function Group to the TR, will it help? Will the TR hold all the associated INCLUDEs declared in this Function Group?
    plz advise.

  • Which version of an object is included in a transport request

    Hi experts,
    I have one doubt regarding the transport requests and the object versions included in it.
    We've found in one development that there are differences between the development system and the productive system and all the transport requests, which include this object, have been transported to production.
    The transport requests were transported in the following sequence:
    Order number    Date            Time
    1. D01K904477  29.03.2007 17:41:52
    2. D01K904511  30.03.2007 17:21:54
    3. D01K904425  30.03.2007 17:51:36
    The last order transported contains a previous version of the object.
    From my own experience in other projects I'm not sure whether the transport system it's well configured or not.  I have the idea that the transport requests always include the last version of the object transported.  Probably, it depends on the transport routes... But I'm not sure.
    Any help would be highly appreciated.

    Thank you for your answer Juan.
    This is clear. But my doubt is not solved yet.
    I'm referring to the versions included in an older transport request. 
    In our system If we transport a previous transport request to production, the latest version of the object is overwritten.
    E.g.:
    TR  1    Date: 01/01/2007  (DD/MM/YYYY)  First version of the program
    TR  2    Date: 01/03/2007  (DD/MM/YYYY)  Second version of the program
    1. We transport TR 1 to production.
    2. We transport TR 2 to production.  We have the last version of the program in production.
    3. If we create transport request TR 3 and we include the object in this TR, this TR will include the active version of the object.
    4. If we transport TR 1  to production, latest version is overwritten.  <b><<<< This happens in our system.</b>
    We don't know if this is happenning due to the transport routes configuration.
    Thanks in advance.

  • Posting Key Field Status changes - unable to generate Transport request

    Dear All,
    I did posting key field status change from suppress to optional ( P.Key 24).
    However I am unable to generate a transport request.
    Please share your inputs
    Thanks
    Sanjai 

    Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
    Regards
    Abhay

  • ChaRM: read categorization of change docs based on transport request ID

    Hi There,
    We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
    Ádám

    In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
    If you need my complete code, drop me a mail.
    Thanks,
    Ádám

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

  • How can we change the "Unclassified" in transport request???

    Hi All,
      how can we change the "Unclassified" in Sub Request Description while creating a new transport request
    Thanks,
    Andy

    Hello Roger,
    Try to open your TR and in the Request/Task menu at the top, select Change task type.
    Hope it helps.

  • How to change description of released transport request

    Hi experts,
                The transport requests tasks and are released and owner of TR also released, now need to modify description.
                Is their any possible way to do it, because transport is not moved out of the system.
    Thanks,
    Pavan

    Hi
      There is one way to achieve this.But this s not advisable.
    1.) Got o FM 'TRINT_CHECK_REQUEST_CHANGEABLE'
    At the line number 111 IF is_request_header-trstatus CA sctsc_states_released, put the break point.
    1.) Double click the released request which you want to change the description.
    2.) your EDIT option will be disabled. Just type '/h' in the tcpode area and press enter, your debugging will switched on.
    3.) Then Press ENTER again, it will open the debugger screen, in the variable change the SY_UCOMM field to 'WB_DISP_EDIT_TOGGLE' . Then press F8.
    4.) your control will be in the FM 'TRINT_CHECK_REQUEST_CHANGEABLE' line number 111. Try to skip this IF condition by using debug technique.
    5,) Now you can change the description.Now you cant save this as Save button is disabled.Just press back button, you will get the message for save the changes.Just save it. Done.
    Thanks and Regards,
    Senthil Kumar Anantham.

  • How to change Client of a Transport Request?

    Hi friends,
    I am trying to Change the clien of a Transport Request in se01 but the field is disabled.. Is there any way to change the Client of a Transport Request?
    Pls Help me.
    Regards
    Venkatesh.S

    Why you want to change the client ?
    I assume, you are not talking about changing the traget system client but the client of the source system TR  ie for ex 100 or 120.
    If the Development Server has two clients say 100 (Configuration) and 120 (Development and Unit Test) then for configuration changes Functionals will get the TR created in 100 where as we developers get the TR created in 120.
    For Development,if you get a workbench TR in 100 client but trying to change the program in 120,then while saving the changes in the TR it will not let you save your changes because the TR is created in 100 but you are trying to use that TR to capture the changes that you are doing in 120.
    To my knowledge we can't get THIS client changed,instead we need to get a new TR in the client say 120 where the workbench changes are supposed to be done.
    K,Kiran

  • Change object from one transport request to another

    Hi,
    I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
    one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
    contains some inactive object. I have also tried to delete that object from this transport request and put in another one
    but when i tried to do that i was only allowing me to create sub task within the same request .
    Kindly suggest me
    Thanks
    Parag

    Hi,
    you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
    Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
    In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
    Rgds.
    Roman

  • Change of Source client in transport request

    Hi Gurus,
    I want to change source client of transport request
    Since I want to transport request between clients of same server.
    I did it using scc1
    But when I want to make any changes to form which was included in that request it is saying
    Request/task DEVK***** has invalid source client XXX
    I am trying this in YYY client
    Please provide solution
    Thanks in advance for your efforts

    Yogesh,
    Does both the clients allow development in the server? Generally it should not be the case.
    Does the client still exists in the server?
    Here is a thread with replies for such an error message.
    Re: regarding Client change for transport request
    Check it,it may give you some lead.
    K.Kiran.

Maybe you are looking for