Undo issues with Prem CC OSX- can't lock COMMAND-Z to undo feature in keyboard shortcuts

Hello,
As per my described problem in heading, when I lock UNDO command to COMMAND-Z in Premiere CC, when I try to undo with the command my clips / edit on the timeline are shifting right.
If I use UNDO from the pull down menu, the functions performs as expected and my last action is undone.
The keyboard shortcut however will not work and only shifts my clips right.
Is there a fix for this please?
Thanks,
Tom

Bernard,
>I have tried the trash preferences as I mentioned in my original post.
No, you mentioned "resetting prefs". I'm talking about manually trashing prefs.

Similar Messages

I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

Warranty and support is only valid in the country of origin. The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
Warranty is determined by device (serial number), no documentation required.
Apple does not repair devices, they replace them. For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

someonehelpmaddy wrote:
My Mac knows that it is connected to the montior...
Open your Displays system preferences. Is there an Arrangement tab and does it show two screens? If no Arrangement tab then your mac does not know it has two screens. Maybe smc and pram reset will shake it free and maybe not. Maybe there's something wrong with the connection. Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket. The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor. Check the resolution and if there is a refresh rate check that as well.

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

Do you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support

TS1550 Time Machine issue with Mountain Lion. Can you help?

I have an Iomega Mac Companion used as an external backup drive for my Imac running Mountain Lion. After launching Time Machine, I got an error message that said the backup couldn't' be completed because an error occurred while creating the backup folder. I rebooted and everything was fine for 24 hours. Since then, I get the same error message even after another reboot. In Time Machine preferences it says "oldest backup none" and "latest backup none."
Any suggestions?
GR

Finally have it solved!! Sort of... I spoke with Mac support on two occasions and they were extremely helpful. Thought the issue was with the firewire 800 connection. Switched to a USB connection and everything worked great...for about 24 hours. Then had the same error messages. Chatted with Iomega tech support and they finally admitted that there are known issues with Mountain Lion, there is no work around and they have no intention of making it compatible with 10.8.
I'm returning the drive today. Thanks for your help and suggestions. Suggestions for a decent back up hard drive that will work with Mountain Lion?

I am having serious issues with my iPhone 4s, phone constantly locks up

It locks into speaker phone mode all of the time and people can't here me on the other line. The only way to fix is to restart the phone. Happens with Blue tooth and headphones. No idea what is going on. Also having issues with browsing the web. Locks on Espn.com all of the time. Any thoughts?

weird, i would try to restore through iTunes and set up as new as a test.

How can I find and disable Page Down in the Keyboard Shortcuts menu?

I often accidentally hit Page Down because it's right beside my arrow keys. It seems to switch to the next symbol in the library which is something I never under any circumstances would want to do. How do I disable this incredibly annoying keyboard shortcut? I can't find it anywhere in the unsearchable rat's nest that is the Keyboard Shortcut menu.

Aha, thank you for drawing my attention to the export html button, it does make it possible to search those keyboard shortcuts.
In my case, View -> Go to -> Next was set to nothing. More oddly, the words "Page Down" don't appear anywhere at all in the generated file, and when I set another random command (Zoom In) to use Page Down it didn't warn of a conflict. Hitting page down zoomed in instead of switching me to another symbol, and when I cleared the shortcut from zoom in it went back to swapping between symbols. I guess I'll have to set something benign to use the page down key.
Bizarre. I guess this must be a bug in CS6?

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

I have issues with Flash Player 10, can you help resolve this?

Hello everyone,
At the risk of giving too much information:
I run a Mac iMac 2.16 GHz Intel Core 2 Duo with 2.5 GB 667 MHz DDR2 5 DRAM with OS X version 10.4.11
The issue:
I recently did the following things,
a) Downloaded and used Safari Version 4 Public Beta (4528.17) Without any issues.
b) Downloaded and used Flash Player 10.
Prior to this I wasn't aware of any issues, so I shall assume that Safari and Flash Player 9 worked fine together.
I also run Opera version 10.00 Beta, Firefox version 3.0.1.0
Here's the issue, when I visit BBC iPlayer and select a TV or Radio progamme I get this warning ..."A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run. your computer may become unresponsive. Do you want to abort the script?" YES/NO ( attached file).
Selecting Yes or No results in the TV or Radio Progamme continuing to play but all control is lost so a Force quit is neccessary.
This issue applies to Firefox and Opera.
Sky.com doesn't appear to suffer these issues in as much when I've uninstalled Flash Player, Sky asks for 10 to be installed and works fine once it's done. I should add that I installed Adobe AIR after the issues began without any resolution.
No doubt when you know what the issue is it's resolved in a flash, so come on who out there can help me...please.

Hello Chris,
Thanks for the Flash settings instructions, that was useful and now I understand that all those particular options are available from a right click. Having said that in this case I still wasn't able to resolve my issue, although I can right click and by clicking anywhere in the Adobe Flash Player Settings panel select or deselect there doesn't appear to be anyway to save that selection,(attached).
I should say at this point that I'm thinking that if my issue might be display speed then by disabling hardware acceleration this might resolve the issue.
Regards
Chris Antjoule

Dequeue issue with MQ adapter but can enqueue

I was trying to do a POC for MQ adapter. Even though I was able to write messages into a MQ queue, I could not read from MQ queue. I got the message below in the domain.log.
<2009-06-05 16:57:48,343> <ERROR> <default.collaxa.cube.activation> <MQSeries Adapter::Inbound>
ORABPEL-13080
Error.
"[QueueProcessor] could not get message from Queue :TEST.EPOS.QUEUE"
Contact oracle support if error is not fixable.
at oracle.tip.adapter.mq.inbound.QueueProcessor.dequeueMessage(QueueProcessor.java:598)
at oracle.tip.adapter.mq.inbound.QueueProcessor.run(QueueProcessor.java:172)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2394
at com.ibm.mq.MQQueue.get(MQQueue.java:1012)
at oracle.tip.adapter.mq.inbound.QueueProcessor.dequeueMessage(QueueProcessor.java:587)
... 4 more
The steps I have done are
1.     Created a JNDI entry for MQ Adapter in oc4j_ra.xml (Channel, Queue Manager, Host are all correct)
2.     Restarted the oc4j_soa only from front end.
3.     Created a BPEL process to write message to a particular MQ. This was working. I checked the message using a java client.
4.     Created a BPEL process to receive the message from the same queue (all details were same as earlier one). No instance of the BPEL process instantiated.
I tried to dequeue the message using a java client and it was working. I was getting MQ reason number 2394. I am not sure about the reason. May be you have faced the same problem. Do you have any idea or suggestion?

Can you increase the logging? I just wonder if you can get any more information.
On the surface it looks like you are sending duplicate messges to the adapter? SOA Suite likes the group id / correlation id to be unique every time, otherwise it thinks it has processed that message.
If you restart SOA Suite does one message get read then stop, if so then this looks to be the issue.
What you need to do is populate the group id and correclation id with unique values every time.
To increase the logging, in BPEL Configuration increase the default.collaxa.cube.activation to debug.
cheers
James

Issue with Windows Photo Viewer: "can't save picture because an unknown error occured"

Hi,
I recently installed Windows 7 RC (Build 7100). I quite often have an issue in Windows Photo Viewer when rotating an image and trying to go to the next picture. It gives me the error "Windows Photo Viewer can't save picture because an unknown error occured".
Seperate from this issue: when I delete a picture in Windows Photo Viewer, it is still in the Windows Explorer overview of files. This did not use to be the case in Windows XP?
Kind regards,
Frederik

Hi
SOSv2 ,
This should be fixed in Windows 7 RTM.
Also, you can install Windows Live Photo Gallery to view and rotate pictures as well. To download it, please click
HERE . For more information about Windows Live Photo Gallery, you can
a question on
Windows Live Answers
In addition, please understand that Nikon RAW images (and most Canon) do not support rotate functionality in Windows Photo Viewer, and thus rotate is
disabled. To rotate those types of images, the user will need to use an image editing program that fully supports their RAW codec.
Regards,
Linda
I am using Win 7 x64 Ultimate RTM and still have this problem (with JPG's dumped from my Nikon to the hard drive). Doesn't do it on every one that I rotate, but still very annoying. Is there a fix?

On my second Air, still having issues with core shut down, can I return?

I am on my second macbook air 1.6 80 HDD. My first air I had for about 3 weeks. I brought it in to get checked out by a genius because of problems I was having watching video. They said they would replace it just this one time. Now after watching a few videos on my new air I notice that I am having the same problems with choppiness in video playback. I did the SMC reset and that did not help. I realize now that one of the cores is being shut down. I don't know if this a thermal paste issue or not. If this is going to be a problem with all the units would I be able to return my air even though it is past the 14 day period to return? I was actually interested in exchanging it for a new MBP. It a shame that the air is having these problems but I should be able to watch a simple movie downloaded from itunes without skipping. Anyone have a similar situation?

If this is going to be a problem with all the units would I be able to return my air even though it is past the 14 day period to return?
Can Apple Customer Relations, explain the situation and tell them you're not happy. They will work with you if you want to exchange it. They may refund your money. I got them to once.
Apple Computer Customer Relations: 512.674.2500
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

HT1373 I have a new Ipad with retina display but two issues with itunes 1) I can not syncronize films&music with the library on my mac and 2) When I download music or films from itunes to my ipad from itunes store the download never finishes. Any help??

I have a two problems with my new Ipad 2 operating system iOS 6.1.3
1) I can not syncronize with my itunes purchaces that I have on my mac book pro (operating system mountain lion)
2) When i purchase items from itunes store the downloads never finishes
I have tried starting and re-starting. Resetting the Ipad to original settings and non of this have worked. Any idea to what I should do?
Thanks a lot, Josephine

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Funky and annoying issues with my ipods harddrive, can anyone help please?

Hi everyone,
this is the first time ive been to an ipod support forum, ive tried everything and this is the last resort please help!
ive got a 4thgeneration ipod (non-color) and this is my 4th one, after a random period of time (between 4 weeks to 2 months) they all break. The hard drive starts making crazy sounds, randomly the unhappy face appears and eventually you lose everything, im not having a great experience with this product and apple refuse to refund saying theyll just replace it with another one (3 ipods later its still not working)
It hasn't been abused, i've treat this one like it's worth its weight in gold and its barely been moved since i've gotten it (mostly been using it for temporarily storing files). I unmount it (safely eject/remove hardware) before unplugging it and do everything by the book.
This time it's gone beyond what normally goes wrong..
As a last resort i tried restoring the ipod to factory settings, something must have gone wrong during this process because now the ipod is convinced that it is just a 400meg drive, is there anything i can do to restore it to its full 40gb?
formatting just gives the option to format it to 400meg, fdisk wont work because its a USB disk, same thing with partition magic.
any ideas?
im desperate lol! also, if not, what are the chances of convincing apple to refund me so I can get an iRiver?
having said that, my friend has the exact same model and has had it about 7 months without any problems, maybe im just unlucky!
id prefer to repair it rather than send it off again for another refurbished model, any ideas?
thanks in advance guys..

"Did you do this within the iPod interface?"
not sure what you mean sorry!, I used the ipod updater tool to restore it to factory settings.
Apologize for that one, I somehow assumed you tried to reset it with holding "menu" and the center button or via "settings->reset to factory setting" in the iPods menu.
i've tried formatting it with windows but it only allows me to format it to the drives 'maximum capacity' of 400megs, fdisk for linux tells me the maximum partition size can be 400megs also
Well, that might be the thing you shouldn't have done. The iPod must be formatted with the Updater! Other programs (like Windows Explorer and Partition Magic) mess up the iPods firmware.
As the "400MB" appeared after the Updater treatment, the drive surely is messed up. Try the latest Updater once again. If this doesn't work out, you could run chkdsk and use the Updater afterwards.
If there's still no avail, you would have to send it in one more time.

Issues with images in Yosemite (Can't load images correctly)

I have been experiencing a weird behavior in Yosemite (10.10.1), related to opening images of any kind in most of my programs in my MacBook pro 15" (Late 2011). Images would not load correctly, showing a bizarre pattern of black stripes (example image attached). This is happening in Mail, Preview, Firefox, Safari; pretty much in all kinds of software that is able to open images (except photoshop, illustrator and iPhoto that I tested as well). Even with jpg, png, tiff, or pdf images. If I copy the image and paste it in Pages or other software, then the picture is revealed correctly. It seems to be stochastic, as some pictures will open correctly while others don't.
Just as a comment, the only different thing I did before this issue was to install iPhoto (Version 9.6).
Thanks in advance.

Hi Bett,
I don't know where else you have looked for help, but these links may be useful.
http://support.apple.com/kb/HT4168 "Creating ePub files with Pages"
which has a link to:
https://discussions.apple.com/article/HT4168#
which is an Apple Support Community "Creating ePub files with Pages".
Regards, Ian.

Undo issues with Prem CC OSX- can't lock COMMAND-Z to undo feature in keyboard shortcuts

Similar Messages

Maybe you are looking for